Used Plastic processing machine for sale (11)

Condition: used, Year of construction: 2020, Operating hours: 1,200 h, Metal Color Kicker Separator for separating colored objects from material streams using an RGB camera or separating aluminum or copper from material streams using a metal sensor. Description: The system, consisting of a feed chute with feed hopper, a feed plate, an acceleration belt, a sensor and camera system with particularly high sensitivity and a highly efficient flap system, was developed to separate a wide variety of materials from a waste stream. The fed material is evenly distributed on the conveyor belt of the metal kicker. At the end of the belt, the parts (> 1 to 2 mm, useful from approx. 5 mm, adjustable) are detected, analyzed and deflected out of the material flow by a highly sensitive, spatially resolving metal sensor and camera. This is done by our patented electrodynamically driven flaps. These flaps are arranged parallel to the discharge edge of the conveyor belt. Each flap is assigned a sensor/channel. 1. metal/color kicker 400: Wbrwgsdd0 - Belt length (center distance): approx. 4,000 mm (extended version) - Conveyor width: approx. 400 mm - Total machine width: approx. 700 mm - Feed height: approx. 1,700 mm (incl. acceleration plate) - Drive: drum motor, according to requirements (usually 2.2 KW) - Electrical power: according to requirements (usually: 400 V / 50 Hz, approx. 2.2 kW, for the entire machine) - Number of flaps: 16 (flap arrangement: bottom) - Spare flaps: 1x for exchange and replacement in case of defect - Number of tracks: 16 - Integration: Metal sensor, for the detection of metals RGB camera, for identification of colors (in the first year all color programs are included, after that new color programs can be created at a price of 250,- EUR) - Collecting funnel: incl., according to requirements - Acceleration plate: incl. - Color: RAL 5021 2. switch cabinet: always adapted to the conditions on site, brand Rittal, with cooling fan, connections according to the requirements on site (normal 400 V / 50 Hz), integrated in the machine

Condition: new, Year of construction: 2023, Built on order The sink-float separator STF 3.0 is perfectly matched to our high efficiency SP1000 Mk2 centrifuge and together with these centrifuges forms a compact but highly capable washing line that requires little maintenance and can wash/sort up to 3000 Kg/hour of hard plastics. The machines are fully constructed in stainless steel 304 so that salt solutions can be used without any problems. Additional peripherals such as water purification, transport screws and big bag loading stations are also available. Vxj03u It is possible to assemble a complete line with 3 steps, but the machines are also available separately for your own project. Ask us for more information.

Condition: as good as new (ex-display), Year of construction: 2022, Operating hours: 500 h, machine/vehicle number: 22-014, Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content. Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera. Bzr2kikhky If the machine is too small we can build also bigger. It is our demonstration machine. Throughput / capacity depending on material and purpose. Price on negotiation!

Condition: not inspected (used), Year of construction: 2013, NGR Recycling Line including: NGR control panel Satrind K10/50 shredder with power pack and control panel Serial no: 393313 (2013) transfer conveyors (1200mm wide) Mesutronic MN 5.1D 1500/900 metal detector Kd9oie2bdt Serial no: 921112-D (2008) NGR S Gran 105 VHD recycling line Serial no: Q-08039 (2008) NGR pre-cutter NGR vented extruder & hydraulic screen changer Die face cutter with water bath NGR spin drying unit & vibratory screen TB Plastics M8001A S blender hopper mixing system Serial no: 1915943 (2019) with Moretto suction unit Serial no: 1914812 (2019)

Condition: as good as new (ex-display), Year of construction: 2017, Operating hours: 4,500 h, Technical Specifications: Output Capacity: 500 kg/h Material :PET D2jh797 Other Specifications: Washing and drying: manufacturer Apro Grinder, conveyor, other parts: manufacturer Amis PET bottles in pressed form, up to 2 litre bottles The producer of the line it’s AMIS Recycling Technology for Conveyor and Grinder, together with APRO APPARATE UND ROHRBAUGESELLSCHAFT mbH for the washing and drying parts. Input Capacity 500kg/h with sharp knives

Condition: new, Year of construction: 2012, Technical Data Model type/design: 1) A) Plastic soundproof granulator VESPA35/50VGA_LN and 8mm screen holes diameter Dimensions LxWxH: 1400X1300X2100 mm, 1.215 kg b) Frame, bunker cyclone with filter, flexible pipe, ventilator VT_LN 4.0/350, dust separator DS0.75/320, dimensions LxWxH: 1700X1400X1900 mm 3) Spare screen for granulator VESPA35/50VGAS with 8mm holes diameter, 20 kg 4) Complete set spare knives for granulator VESPA35/50VGAS (10 pces.), 25 kg 5) Year: 2012 General Technical condition: New, original factory packing for overseas shipment. factory packaging for overseas shipping (OVP)/New, in original factory packaging for oversea shipping Delivery possible from: Immediately/immediately Soundproof Granulator VESPA35/50VGA_LN with suction Group PT_LN 4.0/350 TECHNICAL Data Revolving knives/Length 6pcs./250 mm adjustable out the machine Counterknives/Length 4 pcs./250 mm, adjustable The outing knives are made of D2 AISI (1.2379 DIN) HRC 56...58Rotor diameter and speed 350 mm/790rpm Rotor length 500 mm Rotor geometry V-cut geometry (shevron type) Cooling air Soundproofed feed hopper Ghrrpys8qj Hopperopening manual screw device Standard feed opening 520 x 350 mm Height of standard feed opening 1715 mm Output up to 300 kg/h Electric motor LENZE Power 15.0 kW 400 Volt 3 phase 60 Hz Selection screen holes diameter Ø 8 mm Dimensions LxWxH 1350 x 1150 x2070 mm Fan motor 4.0 kW Flexible pipes Ø 100 mm Cyclone with filter and frame with position for 1 m3 big bag filling Ø 480 mm Dimensions of frame with cyclone LxWxH 1640 x 1440 x 3175 mm Weight with ventilator and cyclone 1400 kg Complete set spare knives TECHNICAL Data Adjustable revolving knives/Length 6 pcs./250 mm Adjustable counterknives/Length 4 pces./250 mm Material 1.2379 DIN Hardness HRC 56...58 Spare selectrion screen TECHNICAL Data Holes diameter Ø 8 mm Dust separator DS3200/0.75 TECHNICAL Data Fan power 0.75 kW

Condition: new, Year of construction: 2023, 2 haft shredders in different sizes configurated to your needs and whishes, contact us and find out which model you need or look for. Dz3tia

Condition: reconditioned (used), Year of construction: 1998, Stock-No. 2583p 1 used, partly overhauled and functionally tested pelletizing line, EREMA Type 120 TVE, y.o.m. 1998, output up to 850 kg/h depending materials, equipped with: EREMA conveying belt FB 900/9000 incl. Metall-detector-stopp EREMA cutter unit drive 164 kW – DC speed adjustable ( for regrind rigid material processing ) EREMA Extruder Ø 120 mm drive 267 kW-DC - speed adjustable EREMA melt-filter SW 4/170 RTF incl. Hydraulic Pack 2-Venting ports with Vacuumpump EREMA type HG 242 waterring-pelletizing unit incl. pelletizer, die-plate, Waterbox EREMA GS 2000 & TS 2000 dewatering classification tables EREMA GZ 500 pellet spin-dryer and pellet-blower Ckrvnqtdtj control board The line is shortly available .

Condition: new, Year of construction: 2023, With the REMAV light-weight separator (according to the BEYER system), they turn highly polluted building rubble or ballast into recyclable material in the blink of an eye! It separates the lightweight materials such as plastic, polystyrene, lightweight concrete or wood from the building rubble stone or concrete. The light weight separator can be integrated easily into any existing recycling plant! Pt8ghu Due to the compact dimensions of the system, the screen trestle is easy to transport and can be loaded by wheel loaders with a bucket width of up to 2.70m.Integrated forklift shoes and lifting eyes ensure easy loading of the sieve box. The low task height of only 2.10m also makes it possible to load smaller wheel loaders. The basic machine is designed as single decker, but can be extended for fine screening up to 6mm at any time by means of retractable Unterdeckelemeten. This gives the option to separate the feed into 3 fractions. The sieve system is electrically powered and only needs 2KW/h!

Condition: as good as new (ex-display), Year of construction: 2022, 800 series MD 22 kW, Rotor length 800 mm, 3x2 blades 2 stator rows, weight Approx. 1700 kg, Sieve size on request 1x included. suitable for various kinds of Plastics or other materials contact us for your questions. Mx93a8 directly available

Condition: reconditioned (used), No.: 2587k 1 used, functionally tested pelletizing-extrusion line, output approx. up to 600 kg/h depending materials, equipped with: 1 volumetric material blender ( Dosing unit ) Extruder Plastmachines Type PME 100 Single-screw Ø 100 mm – 35 L/D Rf0o2 Motor 134 kW – DC 1x venting port Melt-Filter BKG Type K-SWE 121 RS – back-flush self-cleaning incl. Hydraulic pack 3 kW Strand die-head with holes 20 x Ø 3,5 mm Strand cooling bath 400 x 4000 mm incl. strand guiding rollers Strand blower Strand pelletizer SG 300 ResoTec Control cabinet Inspection visit shortly possible, date by appointment. More extrusion lines ex our Workshop / stock Wuppertal - Germany available.