Used waste management & recycling equipment for sale (1,861)

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Hodpfx Agovq Rtks Ienl Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: used, Included container 28,5 m3 Hnsdpfxjv Hpn Ss Ag Iel

Year of construction: 2018, condition: excellent (used), From 2018, 15 kW, with hopper and container PM 32-E (32 m3) and tipping device Hnjdpfx Agjyti Ips Isl

Condition: good (used), weight 120 kg Hnjdpfx Agjy Aa I Tj Ijl length 800 mm width 600 mm height 330 mm Remaining stock of new and used milling cutters with bore, end mills, drills, dowel drills, inserts and various other cutters. Manufacturer: Leitz, Leuco, Oppold, and many more Interesting for every well-equipped sharpening room.

Condition: excellent (used), total power requirement 31,7 kW Hedpfxoyvvtrj Ag Ijnl main drive 7,5 kW Input width 550 mm ca. 25/75 mm ventilator 22kW / 10.800 m³/h Industrial shredder or shredder line with carbide knives for shredding various materials such as wood, cardboard, glass fiber mats or similar, e.g. as pre-treatment for recycling processes. The system consists of two infeed conveyor belts, the chipper and a transport fan.

Year of construction: 1990, condition: good (used), functionality: fully functional, with heating (6 kW) drum Ø 600 mm capacity 90 l speed 735 rpm max. load 150 kg including crane multiple containers Hjdpfx Aey R Um Hsg Isnl

Condition: used, Year of construction: 2012, operating hours: 5,812 h, functionality: fully functional, Baler Presto HPK 50 HS, year of manufacture 2012, with perforator and incline conveyor (sliding belt conveyor) Manufacturer: Presto Model: HPK 50 HS Year of manufacture: 2012 Operating hours: 5,812 Drive power: 30 kW Press force: 50 t Feed opening: 1,600 x 650 mm (L x W) Chamber cross-section: 700 x 950 mm Max. filling volume: 1.06 m³ Cycle time: 19 s Tying: 4-fold Throughput rate at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8,420 x 1,900 x 2,400 mm (L x W x H) Machine weight: approx. 10,500 kg Perforator, hydraulically movable Drive power: 2 x 4 kW / 400 V Throughput: approx. 220 m³/h Clear feed opening: 1,380 x 1,200 mm Incline conveyor Length: 7,931 mm Belt width: 1,400 mm Total width: 2,026 mm Incline: 29° Speed: 0.6 m/s Hnodjy R Tp Topfx Ag Ijl Materials: Paper, cardboard, film, PET bottles Please note: All technical specifications are based on manufacturer information. We do not accept liability for the accuracy of these specifications or for potential errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections by prior arrangement are possible. Sale is ex-works, subject to prepayment, with no warranty or guarantee.

Condition: good (used), Year of construction: 2021, operating hours: 123 h, functionality: fully functional, Vertical Baling Press HSM V-Press 860 plus, Year of Manufacture 2021 Technical Data: Manufacturer: HSM Model: V-Press 860 plus Year of manufacture: 2021 Operating hours: 123 Pressing force: 60 t Drive power: 4 kW Hsdpfxoy R Tnce Ag Ionl Filling opening: 1195 x 645 mm Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical idle cycle time: 25 s Theoretical press output: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on manufacturer information. We do not assume liability for any provided information or possible errors. Offers are subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. Sale is ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: ready for operation (used), * Brand: MS * Type: dewatering unit Hnsdey R Tlhspfx Ag Ijl * Dim. dewatering screen: 1800 x 700 mm _ 1 deck. * Driving: 2 pieces vibration motors of each 1,6 kW * Incl.: cyclone, collection tank and pump.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, JMC 200 B Immediat delivery from our possible. Fully serviced. New condition McIntyre’s wide experience in hydraulic equipment manufacture has enabled us to build an 8” shear with a staggering cutting force. Although equipped with only an 8” blade, the high shear force and wide tip to tip opening on the McIntyre 200B means that it can deal efficiently with a whole range of non- ferrous cleaning and sizing operations - in particular larger diameter electric cables and valves. In Hnjdpfxoin N Tdo Ag Iel most cases - if your metal will fit into the jaw of the 200B, then this machine will cut it.

Condition: good (used), Year of construction: 2021, operating hours: 450 h, functionality: fully functional, Vertical Baler HSM V-Press 860 plus, Year of Manufacture: 2021 Technical Data: Manufacturer: HSM Model: V-Press 860 plus Year of Manufacture: 2021 Operating Hours: 450 Pressing Force: 60 t Drive Power: 4 kW Feed Opening: 1195 x 645 mm Filling Height: 1114 mm Bale Size: approx. 1200 x 1200 x 780 mm Bale Weight: 480 kg Binding: manual Theoretical Cycle Time (idle): 25 s Theoretical Throughput: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, Paper, Cardboard Comment: The baler is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on the manufacturer's information. We accept no liability for the accuracy of the information provided or for any possible errors. Offers are subject to change without notice, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex location, without warranty or guarantee. Hnsdpfxey R Srte Ag Ijl Our payment condition is 100% advance payment.

Condition: new, Year of construction: 2026, functionality: fully functional, 600 HD available immediately Serialnumber 965 Hnjdpfxeib Ircj Ag Iel Special price from our stock 06188 Landsberg, Germany The 600HD alligator shear is a fast and strong metal cutting shear with an extended hold down clamp, making it ideal for every cutting and cleaning task whether cable, plastic sections or window frames. Its cutting capacity is up to 63mm, 2″ inch mild steel round bar. The 600HD alligator shear is probably best known for dealing with car radiators. It was designed and built following requests from customers who were looking for a shear with a longer blade to cut larger items such as car radiators which it cuts through in one pass. The automatic hold down clamp holds material in place during the cutting cycle and prevents kick back which speeds up processing and improves operator safety. As with all McIntyre shears, opening and closing the jaws is controlled from a moveable foot pedal. As soon as the foot pedal is released, the cutting blades return to the open position. However, a continuous cutting action can be achieved by keeping foot pressure on the pedal. The 600HD can be supplied with an electric motor or with a 2-cylinder diesel engine.

Condition: ready for operation (used), * Brand: dbr Fördertechnik * Surface: 5000 x 2000 mm – 1 deck. * Driving: E-motor 15 kW * Incl.: springs and springsupport. * Stock: 1 piece. Hjdpfoy R Rvwjx Ag Isnl

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Hjdpfsy R Npiex Ag Ijnl Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,050 mm, bale width: 100 mm, bale height: 700 mm, bale weight: 500 kg, overall weight: 8,500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2026, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: Hodpfx Ajy R Npceg Ijnl 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Hnedpfx Agsy R Nnfo Ijl Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: used, Used industrial gas plant designed to produce high purity hydrogen and carbon monoxide from natural gas. Built by Air Liquide and first operated in 2015, shut down in August 2024. Output capacity as follows: - Carbon monoxide 14500 Nm3/hour with approximately 99% purity. (Actual purity depends on volume of nitrogen in the natural gas feedstock.) - Hydrogen 60000 Nm3/hour with 99.99% purity. - Superheated 40 bar steam by-product. The HyCO plant includes the following (5) main sections: - Syngas generation / steam reforming and steam generation Hnodpfsy Ryrbox Ag Ijl - Gas cooling - CO2 scrubbing - Gas drying and cryogenic dismantling - Pressure swing adsorption (PSA) Also included: sub-systems for provision of operating resources, flare system, process control and safety shutdown system.

Condition: used, Shredder, Erdwich M700/1-600, used machine Manufacturer: Erdwich Type: M700/1-600 Year: 2013 Power: 2 × 22 kW Hedpfx Agex I Dmwj Ijnl Overall dimensions: 1750 × 1820 × 1810 mm Weight: approx. 3,500 kg Hopper size: 650 × 580 mm × 2

Condition: used, Dust Cyclone, Dust Separator, HLZ-J 1600, used machine Manufacturer: HLZ-J 1600 Volume flow: 14,000 Bm³/h Suction side: 400 mm Height: 5853 mm Diameter: 1695 mm Year: 2013 Hnjdpoyuzhwsfx Ag Isl

Condition: good (used), Dust cyclone Stainless, dust separator, used machine -inclusion dimensions: 1900x1600x6200mm - mantle size: diam. 1600x5200mm -stem dimensions: 630x310mm; diameter 280 - weight: 800 kg Hedpottvrfofx Ag Ionl

Condition: good (used), Overall dimensions: 1130 x 3350 x 1050 mm Hnsdpent Uc Refx Ag Iol Output : 125 mm (d) Input: 125 mm (d) We recommend our vacuum pump 3289 for it. It has a filter and can be cleaned.

Condition: excellent (used), functionality: fully functional, Used Sandvik CV217 VSI Crusher Year 2012 All New Wear Parts Shotblasted and Painted 185kW Electric Motor Complete With Electric Control Panel Complete With Support Legs Hnjdey Swimspfx Ag Ijl Approx Weight 9,5000 Kgs Excellent Condition

Year of construction: 2013, operating hours: 700 h, condition: excellent (used), functionality: fully functional, Used Westeria Airtrack 1 Tracked Windsifter Year 2013 700 Hrs 2000mm wide feed belt / rotating drum Hnsdpfx Ageyyxx Eo Iel Heavies Belt / Lights Belt Volvo Diesel / Electric Generator Driven 19,000 kgs Very Nice Unit Fully Serviced & Ready To Go Straight To Work

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Used Komptech Mustang E Static Trommel Screener Year 2008 Static System Consisting Of Hopper, Trommel, Transfer Conveyor & Stockpiling Conveyor 80 mm Round Holes 5.5m Long x 2.0m Diameter Drum Integrated Electric Control Panel Hnsdpfoy Swigjx Ag Ijl Hydraulic Opening & Closing Side Door For Drum Change Anti Wrap Cleaning System 13,000 kgs Weight Very Straight & Tidy Unit

Year of construction: 2017, operating hours: 6,100 h, condition: excellent (used), functionality: fully functional, Year 2017 6100 Hrs 1 Owner JCB Engine Hedpfx Agjxz R Tnj Ijnl Fitted With 0-20 / 40mm Deck Extremely Well Looked After Unit