Condition: as good as new (ex-display), Year of construction: 2023, Demonstration machine with approximately 10 operating hours Another machine available immediately (ex works in Neckartailfingen) *Options available for an additional charge - see below Included: + Profile rotor for higher throughput We would be happy to conduct a free test with your material. I invite you to visit us in Neckartailfingen. You can also send us your material via freight forwarding, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Blades: 15, multi-rotatable, Double row of blades available for an additional €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Funnel volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 40 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg Dimensions (l x w x h): approx. 1,737 x 1,167 x 1,650 mm Moisture content: < 30% dry matter . Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start-up - Fast hydraulics - Automatic OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . Shredder options available for an additional charge: - Raise the shredder by 30 cm (prepared for conveyor belt) + €2,080 net - Eco-Rings: + €1,980 net (recommended for more than 20% hardwood) - Double row of blades + €995 net - Special scraper + €990 net (recommended for shredding veneer or paper, or items with a material thickness of less than 3 mm) - Bent conveyor belt + €8,770 net Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm - Automatic overhead magnet + €5,980 net Alternatively, a fixed magnetic block above the conveyor belt for regular manual scraping + €990 net (for low-volume shredding) Metal parts) - Conveyor belt and overhead magnet control + €2,750 net (Start and stop synchronized with the chipper) or manual start and stop of the belts + €595 net . Raw material requirements: Cjlq Slfob Ny Eyj Uegt - Moisture content (absolute dry matter) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: reconditioned (used), Year of construction: 2020, Functionality: fully functional, Presto HGS20R with lifting and tilting device Year of manufacture 2020 HKV for MGB and comb filling Cgslq Slsvrz Arjf Uot Repaired, checked, serviced Double-sided pickup Side-hinged emptying door Machines are offered repaired, checked, serviced and repainted in the desired standard RAL. We would be happy to make you an offer including delivery.

Condition: used, Included container 28,5 m3 Cgelq Slfjv Hpn Se Uot

Condition: new, Year of construction: 2025, The TRM Series Turbo Mills is an advanced grinding system used primarily in the recycling of electronic boards and cables for the effective crushing and grinding of these materials. Plastics, metals, and other components found in electronic boards and cables are reduced to fine particles and transformed into recyclable raw materials thanks to this machine. With its high-speed rotors, the Turbo Mill carries out the grinding process, reducing materials to micron sizes through friction and impact forces. ✅ Superior Grinding Performance – Friction & impact forces ensure ultra-fine particle sizes. ✅ High-Speed Rotors – Maximum efficiency in material reduction. ✅ Durable & High-Efficiency – Designed for continuous, long-term operation. ✅ Eco-Friendly & Sustainable – Ideal for electronic waste recycling. 🔸 Choose the Right Model for Your Needs! Technical Specifications 🔹 TRM S1 Power: 15 kW Rotor Diameter: 380 mm Cgolq Ssv Hm S Islf Uet Length: 1420 mm Width: 700 mm Height: 700 mm Weight: 660 kg 🔹 TRM M1 Power: 30 kW Rotor Diameter: 500 mm Length: 1680 mm Width: 820 mm Height: 920 mm Weight: 870 kg 🔹 TRM L1 Power: 45 kW Rotor Diameter: 620 mm Length: 1790 mm Width: 940 mm Height: 1040 mm Weight: 1000 kg

Year of construction: 2007, Condition: ready for operation (used), Two Husmann self-pressing containers are available. Volume: 20m³, drive power: 5.5kW, pressing force: 34t, top feed opening: 1470mm/1860mm, bottom feed opening: 970mm/1860mm, feed height: 1380mm, time per pressing process: 42s, stroke volume: 1.14m³, theoretical hourly output: 95m³, machine dimensions X/Y/Z: approx. 6400mm/2550mm/2600mm. Documentation available. An on-site visit is possible. Colq Sov Scruelf Uogt

Condition: used, Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 22924, Exhaust air dedusting system You are welcome to visit us by appointment. Colq Slfsv Scfus Usgt

Condition: used, SELF-PROPELLED TRACKED SCREENING PLANT REV mod: GSV30 Year: 1998 Hours: approximately 11,000 Weight: approximately 180 ql Cgslov Scbcjq Slf Uet Complete with: • FEED HOPPER; • FEEDING BELT; • IRON REMOVER; • VIBRATING SCREEN; • WITH 3 OUTPUT BELTS TO MAKE 3 DIFFERENT SIZES. Measurements: - First floor sieve net: 6x6 - Second floor sieve net: 4x4 - Loading belt from the hopper to the sieve: length 9.00 m x width 0.65 m - Deferrization belt: length 1.64 m x width 0.60 m - First floor under-sieve belt: length 6.80 m x width 0.57 m - Second floor under-sieve belt: length 6.15 m x width 0.56 m - Hopper 2.80 m x 1.80 m

Condition: excellent (used), Functionality: fully functional, Year of construction: 2022, machine/vehicle number: *AA-079-22*, Electric motor cracker for small and medium sized motors Cgelev R Ur Dsq Slf Uet

Condition: excellent (used), 1,5kW weight of machine 235 kg Colqov Hpl Dj Slf Ujgt

Condition: new, Year of construction: 2025, overall weight: 700 kg, power: 17 kW (23.11 HP), Mizar Zig-Zag Separators are designed to efficiently separate light and heavy materials using an air-based zig-zag flow system. This advanced technology ensures a high level of precision in material separation, making it ideal for plastic, metal, and composite recycling processes. ✅ Efficient Airflow Technology – Effectively separates materials based on weight and density. ✅ High Precision & Consistency – Ensures accurate sorting for optimal recycling results. ✅ Energy-Efficient & Durable – Designed for long-term industrial use. ✅ Easy Integration – Compatible with existing recycling systems. 🔸 Technical Specifications Cgslq Sljv Hm I Nef Uot 🔹 ZZS A1 Power: 17 kW Length: 2000 mm Width: 1250 mm Height: 4180 mm Weight: 700 kg

Year of construction: 2008, Condition: good (used), Horizontal baling press Cgslqjg Ibt No Slf Uet Build in 2008 Bale size 800x1000x1400 Loading height 1250mm

Year of construction: 2014, Condition: excellent (used), Functionality: fully functional, PELLETIZING EXTRUSION LINE - BEIER 2014 / EKOCHEM - 2023 - with autostart heating - Belt conveyour with ampers load control - Aglomerator - 75 kw with cooling blower and auto water spray system - Extruder main motor - 110 kw - Double degassing MELT LASER FILTER SYSTEM - HOP 400 - Ekochem - 2023 - with autostart heating - with cooling pump - laser filter spare parts : 1 set 200microns, 1 set 250 microns, 2 set 300 microns, 2 blades PELLETIZER - RW-440 - Ekochem - 2023 - with new Ekochem die head water pump - with PE and PP die head - with air compressor and custom die head blades - 48 h/set change - Centrifuge - Vibrator - Heated Silo + weight system - Capacity : PP( 400 - 500 kg/h) / PE( 500 - 600 kg/h ) Cgeljuac Ugoq Slf Ujt

Year of construction: 2018, operating hours: 4,800 h, Condition: ready for operation (used), Functionality: fully functional, Leaf vacuum cleaner litter vacuum cleaner glutton Electric street vacuum cleaner Glutton 2411 electric We have 6 in stock Good batteries Year of construction 2018 We have several Price 3000 ex VAT per piece Cgolq Slfjv R El Uo Ujt

Condition: used, Year of construction: 1994, pressing force: 50 t, power: 22 kW (29.91 HP), We sell baler BAUER Technical data: Installation of the secondary raw material baler Manufacturer BAUER Model 401 Year of production 1994 Power 22kW Compressive force 40-50 t Celq Slfsv R Dtde Usgt The dimensions of the press are 10300 x 2000 x 3000 mm Tipping weight ~ 400 kg PRICE ON REQUEST!

Condition: reconditioned (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 610.01.022, pressing force: 59 t, bale weight: 350 kg, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,180 mm, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, bale height: 800 mm, bale width: 700 mm, input voltage: 400 V, overall weight: 2,300 kg, warranty duration: 6 months, input current: 16 A, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2024, transport width: 1,059 mm, transport length: 1,838 mm, type of motor: three-phase motor, nominal current: 16 A, protection type (IP code): IP54, input frequency: 50 Hz, cylinder stroke: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The stated price is exclusive of VAT, ex works, and excluding packaging. The press has been cleaned, function-tested, repaired, and equipped with a new control system in accordance with EN16500. All spare parts used are genuine Strautmann parts. Technical Details: Manufacturer: Strautmann Umwelttechnik Type: PP 1207 Bale Size (L x W x H): 1180 x 700 x 800 mm External Dimensions (L x W x H): 1838 x 1059 x 2871 mm Transport Height: 2050 mm Filling Opening: 1190 x 600 mm Baling Pressure: 59 t / 580 kN Throughput: 1 - 2 bales / hour Number of Belt Channels: 4 Baler Weight: 2,300 kg Power Supply: 400 V / 50 Hz Power Consumption: 4 kW Installation Location: Indoors / Outdoors, Covered Cgjlq Slsv Rzwmef Uet Includes Bale Belt Starter Set, 19 mm Serial Number: 610.01.022 Year of Manufacture: 2004

Condition: new, Year of construction: 2025, Mizar Compact Series Cable Recycling Machines are designed for the efficient recycling of cables of different diameters and materials. By breaking down cables, they separate metal and plastic components, ensuring maximum material recovery. ✅ Efficient Cable & Radiator Recycling – Effectively separates metal and plastic. ✅ Turbo Mill Technology (CMT Models) – Achieves higher purity by completely separating fine copper wires. ✅ Compact Design – Ideal for facilities with limited space. ✅ Energy Efficient & Cost-Effective – Minimizes operational costs. 🔸 Recyclable Materials: ✔ Cable ✔ Radiator 🔸 Technical Specifications 🔹 CMP Power: 11 kW Granulator Motor: 7.5 kW Granulator Blade: 3+2 Length: 1300 mm Coljv Hbdrsq Slf Usgt Width: 1500 mm Height: 2140 mm Weight: 1300 kg 🔹 CMT Power: 13 kW Granulator Motor: 7.5 kW Granulator Blade: 3+2 Length: 1300 mm Width: 1500 mm Height: 2140 mm Weight: 1380 kg

Condition: like new (used), Year of construction: 2005, operating hours: 20,000 h, Functionality: fully functional, warranty duration: 24 months, type of motor: electric gear motor, rotor speed: 165 rpm, rotor diameter: 500 mm, year of last overhaul: 2024, Equipment: documentation/manual, No reserve price - guaranteed sale to the highest bidder! Cgelq Sljv Rxxbjf Ujt Machine completely overhauled in 2024 (rotor and counter blades completely re-equipped); 1 year or 2000 h warranty TECHNICAL DETAILS Suction length: 1,250 mm Suction width: 2,962 mm Number of blades: 2 x 27 (80 x 80 mm) Rotors Rotor length: 2,962 mm Rotor diameter: 500 mm Number of rotors: 2 Rotor 1 speed: 95 rpm Rotor 2 speed: 75 rpm Drive Motor type: Electric gear motor Main motor 1 power: 75 kW Main motor 2 power: 55 kW MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Machine weight: 16,000 kg EQUIPMENT - Rotor and counter blade in mint condition - Machine base in mint condition - Inlet hopper in mint condition - Electrical control panel and control panel in mint condition - Steel support for the machine in mint condition - Manuals, circuit diagrams, and technical drawings available in ACAD

Year of construction: 2022, Condition: excellent (used), Functionality: fully functional, TEKNOPLASTMAK AGGLOMERATOR TMP - A1200 Colq Souadfgolf Uogt - Feeding conveyor belt - 1,1 kw - 0,3 m/s - Main motor - 90 kw - Agglomerator diameter - 1200mm - Humidity Suction Fan / Temperature Regulator / Inspection Gate - Heated method : self friction - Automatic water stray system / Pneumatic open-close gate - Bearings lubrication system - Fixed blades : 9 pcs - Rotating blades : 2 pcs - DIN 2842 BOHLER 52 HRC - Year of manufacture : 2022 - Capacity : PP ( 300 - 400 kg/h ) / PE ( 400 - 500 kg/h )

Condition: ready for operation (used), Functionality: fully functional, Whats app Please contact us for any further information. Celjv Rw I Ieq Slf Usgt

Condition: used, Year of construction: 2002, pressing force: 115 t, power: 150 kW (203.94 HP), For sale: Paal Konti 425 D horizontal baler Technical specifications: Manufacturer: Paal Type: Konti 425D Year of manufacture: 2002 Feed opening: 102 x 200 cm Drive power: 2 x 45, 2 x 75 kW Pressing force: 115 t Settings: Horizontal, fully automatic Roll weight: 550-850 kg Celq Slov R Dqcef Ujgt Pressing weight: 36 t PRICE ON REQUEST!

Year of construction: 2025, Condition: as good as new (ex-display), to sell the demonstration machine at a special price Cgolsd N Dn Doq Slf Uot Our MVZ 7.5 granulator is suitable for shredding thin-walled parts and/or for post-shredding wood chips. More details after a test with your material. Larger systems are also available as an option The price is only for the shredder as shown in picture 1 - fan, cyclone and filter are options. Motor: 7.5 kW *larger systems on request (4 to 75 kW) Throughput up to 120 kg/h *depending on screen and material Much higher throughput rates can be achieved with the secondary shredding of wood chips. Details after the test with about 30 kg. Rotor diameter: 180 mm 6 rotary knives each 225 mm 4 stationary knives each 225 mm Dimensions: 930x730x1420mm weight: 450 kg, suction nozzle: 100 mm, Screens: 6.8 and 15 mm - other screens available, Price per sieve: €390. Price set replacement knife: 579 € Suitable e.g. fur: - Plastic waste of all Art.-No Various materials - HDPE, LDPE, PP, PS. PC, PA - biomass -Wood - Herbs etc. Parts from injection molding, blow molding, injection molding scrap, small bottles, cables, small pipes, profiles, etc

Condition: ready for operation (used), Year of construction: 2006, Whats app - Mamalis Themis Please contact us for any further information. Cgslq Slfev Rw Hds Ust

Condition: used, Year of construction: 1994, pressing force: 30 t, power: 22 kW (29.91 HP), Horiontal Baller Paal LIKON 200C Technical data: Engine power - 22 kW Colq Ssv R Dn Uslf Usgt Year of production - 1994. With oil cooler Horizontal binding x 4 times Pressing force - 30 tons Overall dimensions of the press: 10000x2000x2750 mm Weight of the press: 10 tons. Dimensions of the loading opening: 1400 x 700 mm Bundle dimensions - 700x1100x1000-1200 mm variable length With hydraulic oil Without binding wire Without conveyor belt, it worked in a print shop, only with dry shredded print waste! Motorcycle hours - 62639 The press is in good condition, ready for operation PRICE ON REQUEST!

Condition: used, Year of construction: 1992, pressing force: 30 t, power: 15 kW (20.39 HP), Technical specifications: Manufacturer: Homa Type: BP3000P Year of manufacture: 1992 Filling opening: 1050 x 820 mm (L x W) Drive power: 15 kW Pressing force: 30 t Settings: horizontal, fully automatic Bale size: 800 x 900 mm Bale weight: ~ 300 kg Cgelov R Di Esq Slf Uot Machine weight: approx. 5,650 kg PRICE ON REQUEST!

Condition: used, Year of construction: 1995, pressing force: 85 t, power: 170 kW (231.14 HP), BALLER PAAL KONTI 425 C Technical specifications: Manufacturer: Paal Type: Konti 425C Year of manufacture: 1995 Feed opening: 102 x 175 cm Drive power: 170 kW Compression force: 85 t Settings: Horizontal, fully automatic Roll weight: 500-650 kg Cgelq Slsv R Difef Uot Press weight: 25 t PRICE ON REQUEST!