Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, Dixi 50 S vertical baler, year of manufacture 2019 Technical data Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 50 S Year of construction: 2019 Drive power: 7.5 kW Pressing force: 50 t Pressing time: 23 s Csb Hc Aov Niytoilsgt Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Tying: manual Transport dimensions: 1800 x 2000 x 2300 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, foil, polystyrene, fleece, glass wool, etc. The operating instructions and EC Declaration of Conformity are available in German. Remark: The machine is in very good condition. It was checked and tested by us in 28816 Stuhr. The video can be found above with the pictures, or on our website or our Youtube channel. Viewings, also under power, are possible at any time by appointment. On request, we can also carry out tests with your equipment for a fee. We are also happy to answer questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale and revocable at any time. Viewings are possible by arrangement. The sale is ex works, without guarantee or warranty.

Condition: used, Year of construction: 1995, Functionality: fully functional, machine/vehicle number: 4047, overall weight: 3,600 kg, type of input current: three-phase, DGUV certified until: 02/2024, Press station including press control system NG 10 with lift-tilt device and lid opener, material separator, filter system, and fan (Krämer Lufttechnik) including piping 2 x roll-off containers / coupling containers for press station Manufacturer: Ludden + Mennekes Coupling container Year of construction: 1995 Capacity: 32 m³ Dependent weight: 3,600 kg Incl. storage rails Cgob Hev Twf Esc Ailot In used condition! Dismantled and stored ready for transport. Location: 36341 Lauterbach, delivery possible throughout Germany (for an additional charge) All prices are subject to VAT. The images are for illustrative purposes only. May also be sold in individual parts.

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked impact crusher FTI-110s is a complete mobile system which moves on hydraulicly driven tracked system with 1 km/h speed and combination of a vibrated grizzly feeder, an Impact crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationality of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. Advantages of Tracked Crushers; -Heavy-duty walking trackes can reach places where ordinary machines can not reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: Model: FTI-110s Production Capacity: 200-240 tons per hour Maximum Feeding: 500 mm Crusher Type: Impact Crusher SIZE: 1000x1000 mm Csb Hcev Tvtzs Ailsgt CSS Setting: 0-50 mm Total Power: 360 kva Vibrating Screen: 1500x2700 mm Weight: 40 tons Dimensions: 2900x3180x14760mm - Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2008, operating hours: 2,156 h, power: 74 kW (100.61 HP), Type of fuel: Diesel Year of manufacture: 2008 Field of application: Agriculture Drive: Wheel Empty weight: 12.500 kg CE mark: yes Cgsb Hov Tu Dxjc Ailot Jenz MU 2000 D. Year: 2008. Hours: 2156. Weight: 12.500 kg. CE machine. Axle load: 11.500 kg. Moover. Radio remote Control. Perkins P1104C-44T engine. 74.5 KW. Tyres: 445/65R22,5 70%. German machine! ID NR: 238. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: like new (used), Year of construction: 2005, operating hours: 6,950 h, overall weight: 29,000 kg, Terex Pegson Trakpactor 428 impact crusher 2005 year 6950 hours Inlet 1067x711 mm Max feed size: 400 m3 Engine CAT C9 Cgjb Hcotlpmwe Ailst CSS range from 0-20 to 0-100 mm Capacity 80-200 tons per hour depend on material Weight 33,5 tons Blow bars 60% Fitted with overband magnet Machine in very good working condition, ready for work Machine available since 30.05.2024

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Electric Motors Total Power: 2 x 45 = 90kW 2. Machine Weight: 12.000 kg 3. Shredding Capacity : 3 - 4 tons / h ( Aluminum profiles, barrels, fridge, etc steel thickness up to 3 mm and waste ) 4. Cutting blades are made of material HARDOX 500. Blade thickness is 6 cm and coated with HRC 60 hardfilled welding. Blades are easy to replace. 5. Loading Chamber Dimensions: 800 mm x 1200 mm 6. The walls will be covered with HARDOX 500 material. 7. Before painting, the whole machine body will be sandblasted. 8. Two cover undercoat and one cover paint will be applied. 9. The movement of the rotors is provided by an electric motor linked with a gearbox. 10. The rotors are moving independently of each other 11. The loading of the shredder can be done by grape or conveyors 12. In case of a jam between the rotor blades the machine turns the rotors in the opposite direction to remove the compression. 13. After the jam is solved the rotors return to their normal direction, If Jam is continuing the machine will stop with an acoustic warning. 14. A Hydraulic Oil cooling system is implemented. Cgob Hjgwcfzsc Ailst 15. Rotors are independent from each other and work at 18-20 rpm. 16. Hydraulic system components will be provided by PARKER or EATON-VICKERS & KAWASAKI brands. 17. All electrical parts will be SCHNEIDER and SIEMENS brands. 18. The machine is fully automatic with SIEMENS S7-1200 PLC control. 19. The machine is certified with ISO 9001 issued by URS, and CE issued by SGS. 20. Machine will be under AYMAS MAKINA San. Ve Tic. A. S. guarantees against manufacturing defects for one (1) year or two thousand five hundred (2.500) hours of operation.

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, Vertical baler Dixi 50 S, year of manufacture 2019, very good condition technical data Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 50 S Year of construction: 2019 Drive power: 7.5 kW Pressing force: 50 t Pressing time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Cgjb Hcev Nixps Ailet Bale weight: 300-350 kg Tying: manual Transport dimensions: 1800 x 2000 x 2300 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, foil, polystyrene, fleece, glass wool, etc. The operating instructions and EC Declaration of Conformity are available in German. Remark: The machine is in very good condition. It was checked and tested by us in 28816 Stuhr. The video can be found above with the pictures, or on our website or our Youtube channel. Viewings, also under power, are possible at any time by appointment. On request, we can also carry out tests with your equipment for a fee. We are also happy to answer questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale and revocable at any time. Viewings are possible by arrangement. The sale is ex works, without guarantee or warranty.

Condition: excellent (used), overall weight: 29,250 kg, Year of construction: 2015, operating hours: 4,800 h, Terex Pegson Metrotrak 900x600 2015 year 4800 hours Cgob Hc Aieuf Rthelet Inlet 900x600 mm Engine CAT C7.1 CSS range from 0-50 to 0-150 mm Capacity 80-120 tons per hour depend on material Weight 29 tons Fitted with side conveyor Fitted with overband magnet Machine with new main bearing and new shaft Machine in very good working condition, ready for work

Condition: new, Year of construction: 2025, MACHINERY WILL BE BRAND NEW The machinery is available to bale aluminum cans as well as steel cans up to 0.2 mm of the thickness and 3 liters of the volume. All electric-electronic materials will be from Schneider and Siemens Brand. The machine will be fully automatic with PLC control and a touch screen Siemens HMI Simatic Panel with emergency buttons. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for one (1) year or two thousand five hundred (2.500) operation hours, whichever comes first. There will be an Oil cooling/heating system depending on the operation zone. MB 500 Magnetic Separator and VH (120-250) Vibration Hopper are optional for separating the scrap aluminum and steel cans and for getting rid of the dirt and dust in the scrap. Technical Specifications: Bale Size: 500mm x 330mm x ... Container Dimension (Width x Length x Height): 500mm x 1.000mm x 330mm Cob Hc Ajrc Dkqeilogt Capacity Up to 1.000 kg/hour (Aluminum) Up to 2.000 kg/hour (Steel) Bale weighs with a mechanic scale system: 10-20 kg Cycle Time: 30 seconds Top Cover Cylinder Force: 25 tons Main Compression Cylinder Force: 100 tons General Working Pressure: 225 bars Machine Dimensions (Width x Length x Height): 1.100mm x 4.200mm x 2.600mm Electric Motor: 18,5 kW Machine Weight: 5.000 kg

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, Vertical baler Dixi 50 S, year of manufacture 2020, very good condition Technical specifications Csb Hcov Niw So Ailegt Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 50 S PET Year of construction: 2020 Drive power: 7.5 kW Pressing force: 50 t Pressing time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Tying: manual Transport dimensions: 1800 x 2000 x 2300 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, foil, polystyrene, fleece, glass wool, etc. The operating instructions and EC Declaration of Conformity are available in German. Remark: The machine is in very good, as-new condition. The seals on the 2 cylinders for the retaining clamps have been replaced. It was checked and tested by us in 28816 Stuhr. The video can be found above with the pictures, or on our website or our Youtube channel. Viewings, also under power, are possible at any time by appointment. On request, we can also carry out tests with your equipment for a fee. We are also happy to answer questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale and revocable at any time. Viewings are possible by arrangement. The sale is ex works, without guarantee or warranty.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Electric Motors Total Power: 2 x 160 = 320kW 2. Machine Weight: 38.000 kg 3. Shredding Capacity : up to 6 tons / h ( Aluminum profiles, barrels, fridge, etc steel thickness up to 3 mm and waste ) 4. Cutting blades are made of material DIN 1.2746 Dimension : 105x105x49 mm . Blades are easy to replace. 5. Loading Chamber Dimensions: 2200 mm x 4500 mm 6. The walls will be covered with HARDOX 500 material. 7. Before painting, the whole machine body will be sandblasted. 8. Two cover undercoat and one cover paint will be applied. 9. The movement of the rotors is provided by an electric motor linked with a gearbox. 10. The loading of the shredder can be done by grape or conveyors 11. A Hydraulic Oil cooling system is implemented. 12. Rotor work at 20-30 rpm. 13. Hydraulic system components will be provided by PARKER or EATON-VICKERS & KAWASAKI brands. 14. All electrical parts will be SCHNEIDER and SIEMENS brands. 15. The machine is fully automatic with SIEMENS PLC control. 16. • The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health or environmental requirements. 17. Machine will be under AYMAS MAKINA San. Ve Tic. A. S. guarantees against manufacturing defects for one (1) year or two thousand five hundred (2.500) hours of operation. Cjbovtw Iye Hc Ailsgt

Condition: good (used), Year of construction: 2014, Functionality: fully functional, High-performance fan Zenner, type VTZ 710/63/1 special, built in 2014, consisting of control cabinet, frequency converter, cell lock Technical data Manufacturer: Zenner Ventilatoren Type: VTZ 710/63/1 special Year of construction: 2014 Volume: 4.72 m³/s Ceb Hc Aiev Nia Telegt Max. temperature: 80°C Density: 1.2 kg/m³ Total pressure: 5,000 pa Speed: 2900 rpm Motor: 55 kW Voltage: 400/690 V / 50 Hz Weight: approx. 800 kg The fan is intended for transporting paper/cardboard. The material is also chopped up. The machine is in good condition. It was checked and tested by us in 28816 Stuhr. You can find the video on our website or on our YouTube channel. Viewings, even under power, are possible at any time by arrangement. Video calls are possible on request. We are happy to answer questions about the machine by phone from Monday to Thursday from 8 a.m. to 2 p.m. On Friday we are there for you from 8 a.m. to 1 p.m. Please note: All technical data refer to information provided by the manufacturer. We accept no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Viewings are possible by arrangement. The sale takes place ex location, without warranty or guarantee.

Condition: new, Year of construction: 2025, IMPORTANT: MACHINE WILL BE BRAND NEW * The cutting guillotine is made of cast steel and is more resistant to fracture, buckling, and abrasion. * Cast steel cutting ram is subjected to a stress-relieving process. * The bolts of the blades on the cutting ram are monitored by the automation system and they are constantly kept tight by the hydraulic tightening system. Fracture and wear of the blades are minimized with this system, and 5 tons of force is applied to each bolt of the blades. * A hydraulic clamping system is used on both the moving and fixed parts of the blades. * Friction surfaces are coated with HARDOX 450 & 500 to prevent wear. * The machine has a fully automatic PLC control and a professional remote controller. * All electric-electronic components used are Schneider and Siemens Brands. * Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for one (1) year or two thousand five hundred (2.500) operation hours, whichever comes first. SEE THE TECHNICAL DESCRIPTION BELOW: Cutting Force: 700 Tons Side Compression Force: 2x120=240 Tons (each wing) Clamp Compression Force: 120 Tons Ceb Hc Asdd Tp Rsilsgt Pusher Ram Force: 120 Tons Electric Motor: 180 kW Machine Weight: 70.000 kg Cutting Width: 800 mm Box & Bale Size: 800 mm x 600 mm Box Length: 6.000 mm Box Width Opening: 350 mm Capacity: < 10 - 15 ton/h (Cutting Capacity), 15 - 20 ton/h (Baling Capacity)

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, Baler Paal Pacomat II-50 C, built in 2015 Technical data: Manufacturer Paal Type Pacomat II-50 C Year of manufacture 2015 Pressing force 50 t Drive power 45 kW Filling opening 1200 x 620 mm Bale dimensions 700 x 1000 mm, length variable 4-fold automatic binding Throughput at 35 kg/m³ approx. 6.7 t/h 60 kg/m³ approx. 10.6 t/h Bale weight up to 500 kg Transport dimensions approx. 7300 x 2000 x 2500 mm (LxWxH) Machine weight approx. 8500 t Materials: paper, cardboard, film The press is in good condition and was only used for waste paper / punching residues. It was checked and tested by us in 28816 Stuhr. You can find the video above with the pictures, or on our website or our YouTube channel. The complete documentation including the CE declaration, electrical circuit diagram and hydraulic diagram is available in German. Please note: Cgsb Hc Aiev Nh N Tjljt All technical data refers to information provided by the manufacturer. We accept no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and revocable at any time. Viewings are possible by arrangement. The sale against advance payment takes place ex works, without warranty or guarantee.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 80mm 2. Capacity: 700-900 kg/hour ( Copper ) 3. Preliminary Compression Ram Thrust: 12.5 tons 4. Main Compression Cylinder Thrust: 250 tons ( 5 tonne / cm2 ) 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 seconds 7. Electric Motor Power: 30 kW 8. Machine Dimensions (Width x Length x Height): 2.200 mm x 2.600 mm x 2.800 mm 9. Machine Weight: 6.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. Cgob Hc Aegwa Uroiljt 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: good (used), Year of construction: 2019, operating hours: 1,022 h, Functionality: fully functional, Presto CC 20 M baler, built in 2019, 20 t capacity, with bale restraint device. Technical specifications: Manufacturer: Presto Type: CC 20 M Year of manufacture: 2019 Operating hours: 1022 Press force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Filling volume: 0.53 m³ Binding: 3-fold, manual Throughput capacity at bulk densities of 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2500 kg Cgeb Hc Asv Nh Dkoilot Materials: Paper, cardboard, Slide Note: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. The video can be found above with the pictures, or on our website or YouTube channel. Viewings, including live viewings, are possible at any time by appointment. Video calls are available upon request. We are happy to answer any questions about the machine by phone Monday to Thursday from 8:00 a.m. to 2:00 p.m. On Fridays, we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. Offers are subject to change without notice, subject to prior sale, and revocable at any time. Viewings are possible by appointment. The sale is ex-works, without warranty or guarantee.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Bale Size: 400mm x 400mm x... 2. Container Dimensions (Width x Length x Height): 1.000mm x 2.000mm x 800mm 3. Capacity: 4 tons/hour (Steel), 5 tons/hour (Copper), 2 tons/hour (Aluminium) 4. Cycle Time: 90 seconds ( Idle ) 5. Top Cover Cylinder Thrust: 90 tons Csb Hcsdfc Iyj Ailsgt 6. Preliminary Compression Cylinder Thrust: 150 tons 7. Main Compression Ram Thrust: 210 tons 8. Maximum Working Pressure: 300 bars 9. Electric Motor: 37 kW 10. Machine Dimensions (Width x Length x Height): 3.400 mm x 6.800 mm x 3.000 mm 11. Machine Weight: 18.000 kg 12. There will be an ejection door. 13. Repairable and four-edge-usable blades. 14. Container walls will be covered with HARDOX 450 - 500 material. 15. There will be an automatic SKF liquid lubrication system integrated into the compression chamber. 16. There will be an automatic SKF greasing system that will grease the bushings. 17. Piston shafts will be induction-hardened and chrome-plated. 18. Pumps and valves used in the hydraulic system will be by PARKER or EATON VICKERS & KAWASAKI brand. 19. Bypass filter will be added to the hydraulic system. 20. There will be an AKG Hydraulic Oil Cooling System. 21. All electrical parts will be SIEMENS or SCHNEIDER Brand. 22. The machine will be fully automatic with PLC control, PLC brand and model will be SIEMENS. There will be a touch screen SIEMENS HMI Simatic Panel with emergency buttons placed on some important points. 23. There will be blades from 2767 material (hardness 55HRC) at the borders of the top cover and the sides of the scrap chamber. 24. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for 1 year or 2.500 working hours whichever comes first against manufacturing defects.

Condition: good (used), Year of construction: 2015, Functionality: fully functional, Dixi 80 SLD baler, with lift/tilt device, semi-automatic, year of manufacture 2015, overhauled Manufacturer: Dixi Type: Dixi 80 SLD Year of construction: 2015 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (WxL) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Tying: 3-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Materials: paper, cardboard, carton The operating instructions and EC Declaration of Conformity are available in German. Remark: The machine is in good condition. The hydraulic hoses and plastic guides have been replaced. It was checked and tested by us in 28816 Stuhr. You can find the video above with the pictures, or on our website or our Youtube channel. Viewings, also under power, are possible at any time by appointment. On request, we can also carry out tests with your equipment for a fee. We are also happy to answer questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and revocable at any time. Csb Hc Aov Nh Ayoilegt Viewings are possible by arrangement. The sale against prepayment is ex works, without warranty and guarantee.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Bale Size: 500mm x 500mm x... 2. Container Dimensions (Width x Length x Height): 2.000mm x 2.500mm x 1.100mm 3. Capacity: 15-20 tons/hour (steel) 4. Cycle Time: 90 seconds ( Idle ) 5. Top Cover Cylinder Thrust: 90 tons 6. Preliminary Compression Cylinder Thrust: 150 tons 7. Main Compression Ram Thrust: 300 tons 8. Maximum Working Pressure: 300 bars 9. Electric Motor: 2 x 75 kW = 150 kW 10. Machine Dimensions (Width x Length x Height): 10.000 mm x 10.000 mm x 4.000 mm 11. Machine Weight: 55.000 kg 12. There will be an ejection door. Csb Hegwa T Rec Ailsgt 13. Repairable and four-edge-usable blades. 14. Container walls will be covered with HARDOX 450 - 500 material. 15. There will be an automatic SKF liquid lubrication system integrated into the compression chamber. 16. There will be an automatic SKF greasing system that will grease the bushings. 17. Piston shafts will be induction-hardened and chrome-plated. 18. Pumps and valves used in the hydraulic system will be by PARKER or EATON VICKERS & KAWASAKI brand. 19. Bypass filter will be added to the hydraulic system. 20. There will be an AKG Hydraulic Oil Cooling System. 21. All electrical parts will be SIEMENS or SCHNEIDER Brand. 22. The machine will be fully automatic with PLC control, PLC brand and model will be SIEMENS. There will be a touch screen SIEMENS HMI Simatic Panel with emergency buttons placed on some important points. 23. There will be blades from 2767 material (hardness 55HRC) at the borders of the top cover and the sides of the scrap chamber. 24. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for 1 year or 2.500 working hours whichever comes first against manufacturing defects.

Condition: good (used), Year of construction: 2009, Functionality: fully functional, Presona LP 50 VH1 baler, built in 2009, 50 t capacity, including perforator Technical specifications: Manufacturer: Presona Sweden Type: LP 50 VH1 Year of manufacture: 2009 Press capacity: 50 t Drive: 22 kW Throughput at a bulk density of 30 kg/m³: 6-7 t/h 50 kg/m³: 7-9 t/h 100 kg/m³: 11-14 t/h Filling opening: 1500 x 1100 mm Bale size: 1100 x 720 mm Volume weight: approx. 400-550 kg/m³ Baling: 5-fold Transport dimensions: approx. 8800 x 2200 x 2400 mm (LxWxH) Weight: approx. 18,000 kg Materials: Paper, cardboard, film, PET Accessories: Perforator The operating instructions and EC Declaration of Conformity are available in English. Note: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr, Germany. The video can be found above in the pictures, or on our website or YouTube channel. The press has been overhauled. The following work was performed: Base replaced with Hardox plates Plastic slide rails replaced Press carriage rollers replaced Cjb Hov Nhz Njc Ailegt Inspections, including live inspections, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a fee. We are happy to answer any questions you may have about the machine by phone from Monday to Thursday from 8:00 a.m. to 2:00 p.m. On Fridays, we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change without notice, prior sale, and cancellation at any time. Viewings are possible by appointment. Sales are subject to advance payment and are ex works, without warranty or guarantee.

Condition: new, Year of construction: 2025, - Cutting Force : 1600 Tons - Capacity : up tp 70 tons per hour - Side Compression Force : 2 x 220 Tons Csb Hc Aegv Acuoilogt - Clemp Compression Force : 250 Tons - Electric Motor : 480 kW - Machine Weight : 150.000 kg - PLC Controlled - Remote Control Avaliable - Output Length Adjustable

Condition: used, Year of construction: 1979, Functionality: fully functional, Baler Paal Pacomat II with hopper, built in 1979 Technical data: Manufacturer: Paal Type: Pacomat II Year of manufacture: 1979 Drive power: 11 kW Pressing force: 27 t Channel cross-section: 700 x 1000 mm Filling opening: 1000 x 650 mm Throughput: approx. 60/115 m³/h Cob Hc Aiov Nhw Dolegt Bale size: 700 x 1000 mm Bale weight: up to 400 kg Machine dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH) Machine weight: approx. 5200 kg Materials: paper, cardboard, film Remarks: The machine is in working order. It was checked and tested by us in 28816 Stuhr. You can find the video above with the pictures, or on our website or our YouTube channel. Viewings, including under power, are possible at any time by arrangement. On request, we can also carry out tests with your material for a fee. We are happy to answer any questions you may have about the machine by phone from Monday to Thursday from 8 a.m. to 2 p.m. On Fridays we are there for you from 8 a.m. to 1 p.m. Please note: All technical data refers to information provided by the manufacturer. We accept no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Viewings are possible by arrangement. The sale takes place from the location, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: new, Year of construction: 2025, 1. Electric Motors Total Power: 360 kW 2. Machine Weight: 44.000 kg 3. Shredding Capacity: 10 - 15 tons/h (Iron & Steel) 4. Blade Quantity: 78, Blade Thickness: 150 mm. 5. Loading Chamber Dimensions: 2350 x 4085 mm 6. Shredding Chamber Dimensions: 1500 x 2000 mm 7. Replacement and maintenance of the blades can be easily done from the top of the chamber. 8. Cutting blades are made of material No: 2767 9. Main shafts are made of material: 42 CrMo4, 32-34 HRC (Twisting and breaking resistant ) 10. All chamber walls will be covered with anti-wearing armor steel material HARDOX 500. 11. All static blades and distance rings will be made of HARDOX 450. 12. Speed: 4,5 – 6 rpm 13. The movement power of shafts will be provided by four planet reductors which are driven by four power-controlled bi-directional hydro motors. Hydraulic equipment will be PARKER brand or BOSCH-REXROTH. 14. There will be hydraulic oil and reducer oil cooling units separated from each other. 15. Each shaft will be able to move independently from each other. 16. The loading of the shredder can be done by crane 17. The machine will stop itself with an acoustic warning with the help of security sensors which are going to protect the machine against any harm. 18. There will be an automatic grease oiling system to keep bearings oiled automatically. Cjb Hc Aiedfc Uzslsgt 19. All electrical parts will be SCHNEIDER and SIEMENS brand. 20. The machine will be fully automatic with PLC control. There will be a touch screen on the control panel which will provide easy access to machine settings and process monitoring. 21. The machine will be under Aymas Makina San. Ve Tic. A. S. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) operation hours. 22. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements.

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, Functionality: fully functional, Presto CC 50 M baler, semi-automatic, year of manufacture 2015, pressing force 50 t, with lift-tilt device Technical specifications: Manufacturer: Presto Type: CC 50 M Year of construction: 2015 Operating hours: 1932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Tying: 3-fold, wire, manual Throughput capacity with bulk density of 35 kg/m³ - 1.3 t Cgjb Hc Aiev Nhv Telst 60 kg/m³ - 1.7 t 100 kg/m³ - 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4000 kg Materials: paper, cardboard, film The operating instructions are available in German. Remark: The machine is in good condition. It was checked and tested by us in 28816 Stuhr. You can find the video above with the pictures, or on our website or our Youtube channel. Viewings, also under power, are possible at any time by appointment. On request, we can also carry out tests with your equipment for a fee. We are also happy to answer questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and revocable at any time. Viewings are possible by arrangement. The sale against prepayment is ex works, without warranty and guarantee.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW An Inclined Shear is a heavy-duty machine used in metal recycling facilities to cut various types of scrap materials efficiently. • Mixed and heavy-duty scrap can be processed (HMS 1 & 2, cars, pipes, etc. ) • No scrap length limit • No operator needed • Cut length adjustment options Cjb Hcjgv Abpj Ailjgt • Electric and Diesel options • Stationary and semi-mobile options • Hydraulic blade tightening system • The guillotine is made of casting • A remote diagnostic system is implemented • Automatic lubrication • Good output density • Heavy-duty structure • Chrome-plated & tampered shafts and sensitively honed cylinders • Special anti-wear plates • Reliable filtration system for the hydraulic oil • Reliable cooling system depending on the working climate • Top-brand hydraulic and electronic components The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Model: IS 1350 Cutting Force: 1.350 ton Hold Down Force: 250 ton Side Compression Force: 2x200 ton Cutting Width: 1.040 mm Number of Cuts: 2-3 cuts/min. Capacity up to 50 ton/h Weight: 128 ton Electrical Motor Power: 3x132 kW Chamber Dimensions: (W x L) 2,45 m x 8,5 m. General Dimensions: (W x L) 4,6 m x 11 m.