Condition: new, Year of construction: 2025, Production time appr. 4 months Our best-selling briquetting press series + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several hundred machines in use with satisfied customers + Good price performance ratio Throughput approx. Up to 200 kg per hour * strongly dependent on the material. - in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion. - in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion. Csbochqxxovmk Ifegt Technical specifications: Motor: 7.5 KW + 0,55 kW Cooler 400 volts / 50 Hz / 3-phase, Front bush: 125 mm, Briquette stroke max .: 100 mm, Briquette stroke opt .: 80 mm, Pump: 80 liters, Storage container approx. 0.5 qbm content (expandable), Diameter: 1200 mm, with agitator discharge, Hydraulic unit complete with oil tank 220 liters Dimensions approx. 2095 x 1600 x 1310 mm lxwxh, Weight 1370 kg, Automatic on-off switching via level indicator CE compliant. . Requirements for the raw material: - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Year of construction: 2024, Condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: Cjbjua D Alevmk Ifegt weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 41 h, machine/vehicle number: 460001238, Almost new (working time only 41 hours) combined crusher-press for PET bottles and cardboard. Effective system for recycling PET bottles in one рабочем цикле, мужчины обмы скалируемых ПЕТ-бутылок до Cgjbvmk Iov T U E Ajfjt 90%, turning them into compact bales up to 100kg.

Condition: good (used), Year of construction: 2011, Functionality: fully functional, We have a PRESTO SP11 screw press (11kW) for sale. The machine is in good working order with a new coat of paint. Cgebvmk Isv T Uzwofjt With a pressure cap. 2 pieces available in stock (Price is for one piece).

Condition: used, No. 10012 Cgebvmksv N E Iyj Ifst Feed hopper Rema Used Metal plate conveyor / steel plate belt Defective gearbox (Bonfiglioli) Drive power 15 kW Belt width 2000 mm Axis length 10000 mm The system has been out of operation since the end of January 2025 due to gearbox damage Without output conveyor Transport dimensions approx. 15000 x 3000 x 4000 / 5500 mm LWH Sale on behalf of customer, ex location near 78628 Rottweil, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: reconditioned (used), Year of construction: 1992, Functionality: fully functional, machine/vehicle number: 91-01611001, pressing force: 16 t, bale weight: 80 kg, filling opening width: 545 mm, filling opening length: 680 mm, bale length: 800 mm, total width: 860 mm, total height: 1,680 mm, total length: 3,530 mm, bale height: 550 mm, bale width: 600 mm, overall weight: 1,200 kg, power: 3 kW (4.08 HP), A horizontal baler that can be filled via a chute and can be operated with a light barrier. Cebvmjv T R Utek Ifsgt The bales are tied manually using two strapping bands.

Condition: refurbished (used), Functionality: fully functional, type of input current: three-phase, filling opening width: 700 mm, filling opening length: 1,230 mm, Untha RS 50 shredder Power 2 x 22 KW Chamber dimensions 1230x700 Csbvmerywktjk Ifogt New knives 310/2Z and 270/8Z New bearings, seals, oil in the gearbox. Weight approx. 3500 kg. Machine after general service. Untha RS 40 shredder Power 2 x 18.5 KW Electrical cabinet - Siemens Simatic S7 Chamber dimensions 1000x700 Weight approx. 3000 kg. Price on request. Possibility of performing tests. More photos and a video of work on request.

Year of construction: 2022, Condition: new, The MDS-1 Electric Motor Recycling Machine designed to accurate copper extraction from stator insert of electric motor with different types of diameter. Cgebshix N Asvmk Ifot Description: The machine use steel claws to extract copper from the stator shell during backward movement. Stator fixed on special rollers mounted on lifted platform, a holder located in front of the machine keeps the stator from moving. Steel claws release copper when the operator pulls leaver backward. The machine fitted on solid frame, equipped with two sizes of hydraulically operated claws, holder and lifting platform with rollers. Technical information: • Engine power – 11 kW • Maximum engine diameter – 690 mm • Minimum engine diameter – 150 mm • Two types of clamping jaws • Foot switch • Weight – 1250 kg • Dimensions – 2950 × 1150 × 1250 mm • Control panel with an electrical security system

Year of construction: 2020, Condition: new, New machine, packed! Never used! Csbvemfu R Semk Ifegt Everything that is shown in picture coming with device. Hoses, pipes pump, etc. Ready for transport.

Condition: refurbished (used), Year of construction: 2014, operating hours: 7,275 h, Doppstadt DW 3060 Buffalo type C - Year of construction 08/2014 - Operating hours 7275 - Engine Mercedes Benz 430 HP - AD Blue - Roller : 21 teeth - Overband magnet Cgobvmev T Rv Rjk Ifst - Remote control - Hydraulic drive ( self drive) Machine is overhauled and immediately available

Condition: excellent (used), Year of construction: 2005, Shreder twin-shaft machine ANDRITZ MeWa UC120 Machine after technical inspection. Csbvjquurysmk Ifegt

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, Functionality: fully functional, pressing force: 85 t, bale weight: 650 kg, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, Cgobev T I Evsvmk Ifjt We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2000, operating hours: 3,700 h, Functionality: fully functional, total width: 2,500 mm, total length: 6,000 mm, number of blades: 2, overall weight: 22,000 kg, The Komptech Crambo 5000 shredder is in perfect condition. The Mercedes-Benz V8 engine is 435 PK/320 KW and has 2 turbos, making the machine more fuel efficient and powerful. The engine's working hours are 3700 hours. The machine includes documentation regarding the inspections and history of the shredder. Cgjbvmev T I Anok Ifst Additionally included are the schematics of all parts in the shredder and the manual of the engine. If there are additional questions or the wish to inspect the machine then feel welcome to contact us.

Condition: used, Year of construction: 2019, Product crushing and screening kit Manufacturer : ARKAMA Year of production: 2019 Power: 9 kW (two motors 1.5 kW each + two motors 3 kW each) Includes control cabinet with weighing meter. Technical condition: used machine Cobvmk Ievbrczsfegt

Condition: used, WAM RVS filter unit filter cabinet extractor Made entirely of stainless steel Complete with explosion hatch/safety FlamQuench explosion pressure relief EX version Compressed air cleaned filter cartridges Various stainless steel piping present Fan 1.5kW 3000rpm Filter cloth surface 16m2 Filters are in used condition Cjbov Ty Enjvmk Ifegt See our other advertisements VMA Wekerom

Year of construction: 2018, Condition: excellent (used), Doppstadt HS 1600 / 3 Star Screen - Built in 2018 - 3 fractions - 0-20 mm Cgjbvmk Ijv T Rvqjfst - 20-120 mm - Oversized material return to the shredder - Magnetic roller - Machine is powered by the shredder's hydraulics. Also includes many spare parts Very good condition

Condition: refurbished (used), Year of construction: 2007, The shredder is intended for stationary use in recycling plants. The machine can work inside plants, in halls, industrial buildings, in specially prepared facilities under a roof, but it is also adapted to work outside. Input material: The machine is adapted to granulate: • pre-sorted household and industrial waste, • paper and cardboard, • textiles, • foils, plastics and other materials with high calorific value, suitable for the production of alternative fuels, • wood and wood-like waste, • shredded passenger and truck tires and rubber waste, • cables and electrical bundles, • steel and aluminum chips from milling, • oil filters, • electrical and electronic waste, small motors and transformers Manufacturer's catalog data: - specific gravity of the light fraction 2125 kg/m³, - specific gravity of the input fraction 2350 kg/m³, - humidity 8-12% (max. 25%) The UNI-CUT UG 2008 MSL universal granulator is able to process a single, unhardened metal with a maximum cutting surface of 625 mm². This corresponds, among others, to materials: 25 × 25 mm iron bar or 3 mm thick sheet metal with a cutting length of 200 mm. Efficiency: Approx. 1.0 - 18.00 t/h The given values are indicative because they are influenced by many factors: - type and quality of waste and its bulk density, - content of mineral and metal fraction, - granulating sieve and its hole diameter (grain size from 10mm to 150mm is determined by the perforation of the replaceable sieve under the cutting mechanism of the granulator) Cgsbvmk Ielpckgofet - method of dosing the material, - proper service and operation of cutting knives Technical data: Technical Specifications: Manufacturer ANDRITZ MeWa GmbH Type/model UNI-CUT UG 2008 MSL Serial numer ……… Year of manufacture 2007 Gross weight 28,900 kg Color to choose from the RAL palette Power supply Rated voltage 400V Electricity type 3/PE, 50Hz Rated power 220 kW (2 x 110 kW) Rated electricity 562 A Dimensions: Granulator height +- 4800 mm height with extended clamp +- 6580 mm width +- 2900mm length +- 5000mm The exact dimensions of the machine are available with technical drawings for those interested.

Condition: used, Year of construction: 1995, Functionality: fully functional, machine/vehicle number: 4047, overall weight: 3,600 kg, type of input current: three-phase, DGUV certified until: 02/2024, Press station including press control system NG 10 with lift-tilt device and lid opener, material separator, filter system, and fan (Krämer Lufttechnik) including piping Cgjbvev Twf Esmk Ifjt 2 x roll-off containers / coupling containers for press station Manufacturer: Ludden + Mennekes Coupling container Year of construction: 1995 Capacity: 32 m³ Dependent weight: 3,600 kg Incl. storage rails In used condition! Dismantled and stored ready for transport. Location: 36341 Lauterbach, delivery possible throughout Germany (for an additional charge) All prices are subject to VAT. The images are for illustrative purposes only. May also be sold in individual parts.

Condition: excellent (used), Year of construction: 2016, operating hours: 1,521 h, Functionality: fully functional, HSM V-Press 1160 plus vertical baler, year of manufacture 2016 Technical data: Manufacturer: HSM Type: V-Press 1160 plus Stock no.: 9921 Year of manufacture: 2016 Operating hours: 1521 Pressing force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Weight: 2430 kg Materials: paper, cardboard, cardboard, film, plastic, PET The operating instructions and EC Declaration of Conformity are available in German. Cjbvmksv Ni S Ne Ifogt Remark: The machine is in very good condition. It was checked and tested by us in 28816 Stuhr. You can find the video above with the pictures, or on our website or our Youtube channel. Viewings, also under power, are possible at any time by appointment. On request, we can also carry out tests with your equipment for a fee. We are also happy to answer questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale and revocable at any time. Viewings are possible by arrangement. The sale is ex works, without guarantee or warranty.

Condition: used, Year of construction: 2003, Granulator for plastics Manufacturer: CMG (Italia) Type: S4050A Year of production: 2003 Power: 17.2 kW, 400V Cebvmk Isrww Awefogt Weight: 1390 kg New knives have been installed in the machine. Technical condition: used machine, very good condition

Condition: excellent (used), Year of construction: 2016, operating hours: 1,924 h, Functionality: fully functional, HSM V-Press 1160 plus vertical baler, year of manufacture 2016 Technical data: Manufacturer: HSM Type: V-Press 1160 plus Stock no.: 9920 Year of manufacture: 2016 Operating hours: 1924 Pressing force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Cgjbvmov Ni Sijk Ifjt Weight: 2430 kg Materials: paper, cardboard, cardboard, film, plastic, PET The operating instructions and EC Declaration of Conformity are available in German. Remark: The machine is in very good condition. It was checked and tested by us in 28816 Stuhr. The video can be found above with the pictures, or on our website or our Youtube channel. Viewings, also under power, are possible at any time by appointment. On request, we can also carry out tests with your equipment for a fee. We are also happy to answer questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale and revocable at any time. Viewings are possible by arrangement. The sale is ex works, without guarantee or warranty.

Condition: good (used), Year of construction: 2016, operating hours: 1,715 h, Functionality: fully functional, HSM V-Press 1160 plus vertical baler, year of manufacture 2016 Technical data: Manufacturer: HSM Type: V-Press 1160 plus Stock no.: 9919 Year of manufacture: 2016 Operating hours: 1715 Pressing force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Csbvjv Ni R Ssmk Ifjgt Weight: 2430 kg Materials: paper, cardboard, cardboard, film, plastic, PET The operating instructions and EC Declaration of Conformity are available in German. Remark: The machine is in good condition with slight scratches and dents. It was checked and tested by us in 28816 Stuhr. You can find the video above with the pictures, or on our website or our Youtube channel. Viewings, also under power, are possible at any time by appointment. On request, we can also carry out tests with your equipment for a fee. We are also happy to answer questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale and revocable at any time. Viewings are possible by arrangement. The sale is ex works, without guarantee or warranty.

Condition: excellent (used), Year of construction: 2016, operating hours: 1,930 h, Functionality: fully functional, HSM V-Press 1160 plus vertical baler, year of manufacture 2016 Technical data: Manufacturer: HSM Type: V-Press 1160 plus Stock no.: 9918 Year of manufacture: 2016 Operating hours: 1930 Pressing force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Weight: 2430 kg Materials: paper, cardboard, cardboard, film, plastic, PET The operating instructions and EC Declaration of Conformity are available in German. Remark: The machine is in very good condition. It was checked and tested by us in 28816 Stuhr. The video can be found above with the pictures, or on our website or our Youtube channel. Viewings, also under power, are possible at any time by appointment. On request, we can also carry out tests with your equipment for a fee. We are also happy to answer questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00 h. Cgebvmkjv Ni Iqo Ifet Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale and revocable at any time. Viewings are possible by arrangement. The sale is ex works, without guarantee or warranty.

Condition: good (used), Year of construction: 2016, operating hours: 1,509 h, Functionality: fully functional, HSM V-Press 1160 plus vertical baler, year of manufacture 2016 Technical data: Manufacturer: HSM Type: V-Press 1160 plus Stock no.: 9917 Year of manufacture: 2016 Operating hours: 1509 Pressing force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Weight: 2430 kg Materials: paper, cardboard, cardboard, film, plastic, PET The operating instructions and EC Declaration of Conformity are available in German. Remark: The machine is in good condition with slight scratches and dents. It was checked and tested by us in 28816 Stuhr. You can find the video above with the pictures, or on our website or our Youtube channel. Viewings, also under power, are possible at any time by appointment. On request, we can also carry out tests with your equipment for a fee. We are also happy to answer questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale and revocable at any time. Viewings are possible by arrangement. Cgjbvov Ni Idemk Ifst The sale is ex works, without guarantee or warranty.

Condition: excellent (used), Year of construction: 2016, operating hours: 1,940 h, Functionality: fully functional, HSM V-Press 1160 plus vertical baler, year of manufacture 2016 Technical data: Manufacturer: HSM Type: V-Press 1160 plus Stock no.: 9916 Year of manufacture: 2016 Operating hours: 1940 Pressing force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Weight: 2430 kg Materials: paper, cardboard, cardboard, film, plastic, PET The operating instructions and EC Declaration of Conformity are available in German. Remark: The machine is in very good condition. It was checked and tested by us in 28816 Stuhr. The video can be found above with the pictures, or on our website or our Youtube channel. Viewings, also under power, are possible at any time by appointment. On request, we can also carry out tests with your equipment for a fee. We are also happy to answer questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale and revocable at any time. Cgsbvev Ni D Sjmk Ifst Viewings are possible by arrangement. The sale is ex works, without guarantee or warranty.