Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, Technical data on the EPS (Polystyrene) press: Manufacturer FZ-Recycling GmbH & Co. KG, Germany Type FZR 320 Year of construction 12/2022 Drive power shredder 4 kW Drive power of compactor screw 7.5 kW Drive power hydraulic unit for the holding clamp in the press channel 1.1 kW Total connected load 12.6 kW Current consumption 32 A Compaction ratio of the compacted blocks to the original product approx. 50:1 (depending on material) Block weight after compaction approx. 300kg/m³ (depending on material) Block dimensions 320 x 320 mm, variable length Throughput approx. 100 kg/hour, depending on material Achievable density approx. 250 - 300 kg/m³ The pressed blocks are stacked approx. 1400 mm high on pallets and stretch-wrapped. Machine dimensions approx. 4,600 x 1,400 x 1,980 mm (l x w x h) Transport weight press 1,325 kg Condition of the baler: The press was only used sporadically, is in very good condition and available at short notice. Due to the low weight of the machine and the forklift shoes in the transport frame, the press is mobile and can be used directly on the construction site where the material is produced. The electrical connection is made via a CEE 32 A plug. Scope of delivery for the baler: Cgob Ensu Thkaedqtet 1 piece EPS press, ready for connection and use Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, pressing force: 10 t, Fully equipped and ready to use. New oil. Csb Enev Tfhnsdqtsgt

Year of construction: 2024, Condition: new, Vibrating screen with a diameter of 1200mm. Two decks screening the material. mesh size to choose from. the sieve can run dry or wet. making the screen of carbon steel or stainless steel. 1.1kw engine 380V 50hz Cgeb Eehgv T Uondqtot Good quality screening machine at a reasonable price, my sieves are already successfully working in several European countries and customers are very happy !!! available immediately Welcome

Year of construction: 2024, Condition: new, Drum for Doppstadt screener SM 518 and SM 620 on stock. CHECK AVAILABLE PERFORATIONS. We manufacture and provide drums for mobile and stationary screeners, for : - Doppstadt SM 414 - Doppstadt SM 518 - Doppstadt SM 618 - Doppstadt SM 620 - Doppstadt SM 718 - Doppstadt SM 720 - Doppstadt SM 725 also Terra Select, Eggersmann, Pronar, Komptech , Mc Closkey... Bespoke maded drums are our specjality.. Ceb Ejfi Tqbendqtegt In case of any question, please contact me by mobile or e-mail.

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, machine/vehicle number: WKZ45-1030, Stock machine, can be inspected under power! We invite you to visit our technical center to see the quality and functionality for yourself. Material shredder 45KW Hopper opening: 1,030 x 1,235mm Rotor diameter 360mm Star-delta start-up, automatic shutdown at idle - Hydraulic slide equipped with pressure plates - Siemens PLC control - Optionally with control cabinet extension for discharge conveyor belt + overband magnetic separator Complete solution with discharge conveyor belt in any design. Our core competence lies in providing our customers with exactly what they need. Cgobsv Tdq Is Endqtst We work closely with our customers to develop customized, individual solutions and supply corresponding systems from our own production facilities. Please feel free to contact us by phone to find a suitable solution for your application. Conveyor belts, conveyor systems, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastic, metal-free metal detection, neodymium, overband magnets, magnetic belt separators, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separators, block magnets, filter systems All prices are net prices plus 19% VAT. All information is subject to change without notice, only while stocks last!

Year of construction: 2008, operating hours: 6,300 h, Condition: used, Functionality: fully functional, machine/vehicle number: BACKHUS 17.50 573 08, Machine No.: 17.50 573 08 11 Year of manufacture: 2008 Operating hours: approx. 6,400 Equipment: Mobile cab Air conditioning SBA protective ventilation Condition: very good Work performed: New service, replacement of all oils and filters Diesel engine checked Rotor including tools in mint condition Replacement of all defective hydraulic hoses New tracks with rubber pads New throw limiter flap New protective ventilation filter New scraper bar on track clearer Restoration of all technical functions Incl. paint treatment Technical specifications: Curtain width up to: 5.0 m Curtain height up to: 2.4 m Curtain cross-section at 45°: 6.21 m² Turning capacity up to: 3,600 m³/h Feed speed: 0-50 m/min Dimensions Working: Height 4,600 mm Width 5,450 mm Length 4,780 mm Cgeb Endqsv Iy Raotet Transport Dimensions: Length: 2,550 mm Width: 7,550 mm Height: 3,100 mm Engine: Cummins QSC 8.30 lt, 6-cyl. 209 kW / 280 hp Weight: approx. 12,000 kg

Condition: good (used), Year of construction: 2014, operating hours: 3,514 h, Presto HPK 50 HS baler, built in 2014 Cjb Endjv Iyh Eeqtjgt Manufacturer: Presto Type: HPK 50 HS Year of manufacture: 2014 Drive: 30 kW Pressing force: 50 t Filling opening: 1600 x 650 mm (L x W) Channel cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 20 s Binding: 4-fold Throughput at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (L x W x H) Machine weight: approx. 12,000 kg Materials: Paper, cardboard, film, PET bottles Note: The press is in good condition. We recommend replacing the blades/counterblade and the sliding and guide plastics. The hydraulic hoses are from 2017. These should be replaced along with the filter. The operating instructions and CE declaration are available in digital format. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change without notice, subject to prior sale, and revocable at any time. Inspections are possible by appointment. Sales against advance payment are ex works, without warranty or guarantee.

Condition: new, Functionality: fully functional, power: 55 kW (74.78 HP), fuel type: diesel, color: yellow, overall weight: 13,000 kg, drive condition: 100 %, chain condition: 100 %, Year of construction: 2024, operating hours: 1 h, Equipment: UVV, - Band length: 22,875 mm - Band width: 900 mm - Drop height: 9.20 m - Weight: approx. 13,000 kg - Transport dimensions: 12.02 x 2.35 x 2.59 m (L x W x H) - extended feed hopper - Toolbox - Hydraulically foldable front and rear parts - Cable remote control - Galvanized legs - 2 x EATON OMV 400 drive - Hydraulic oil cooler - Full sidebar - Infinitely adjustable discharge height - CAT C2.2 diesel engine with 55 kW Cob Est Ivq Sendqtsgt Identical in construction to Barford TR8036. This offer is non-binding, no guarantee for equipment details. Errors and subject to prior sale! Ref. No.: tba

Condition: new, Functionality: fully functional, Year of construction: 2025, Hello, I have a new 800mm diameter vibrating sieve for sale. The sieve has two levels for classifying the material. Mesh size to be agreed. Changing the mesh size using screws is easy and quick. The engine mounted in the sieve has 0.7kW, 1460rpm and performs a vibratory movement combined with an oscillatory movement around the circumference. The sieve is made of SUS304 stainless steel. The entire sieve structure and the welds themselves are solidly made. The last photo shows how the vibrating engine works, how the material spreads over the mesh. Csb Endqsv I D T Sotogt The sieve can screen both dry and wet material. Possibility of transport to the customer. It is possible to add a third filter deck. I provide access to all operating parts after purchasing the sieve, such as seals or clamps. I also have empty frames on which additional mesh can be stretched. The screener can work dry and wet.

Year of construction: 2008, operating hours: 5,459 h, Condition: good (used), Cable disassembly. Cgsb Endjvvkxkeqtet

Condition: used, Year of construction: 1994, pressing force: 40 t, power: 22 kW (29.91 HP), We are selling the BAUER 300 baler. Technical specifications: Installation of the secondary raw material baler Manufacturer: BAUER Model: 300 Year of production: 1994 Power: 22 kW Pressing force: 40-50 t The dimensions of the baler are 10,300 x 2,000 x 3,000 mm Tipping weight: ~ 400 kg Cob Enjv S Uwiedqtjgt PRICE AVAILABLE ON REQUEST!

Condition: ready for operation (used), Sorting machine to sort out all metals NF and FE The machine can sort out Fe metals separately,Fe iron does not need to be sorted out before. Few operating hours, test sorting in the Habdaufkegeverfahren possible . The machine is demonstrated in working order. The sale is made without warranty and guarantee . commissioning worldwide against surcharge possible. Cjb Enomccu Djdqtogt

Year of construction: 2024, Condition: new, We manufacture and provide drums for mobile and stationary screeners, for : Csb Endqefkm Dfetogt - Eggersmann T 40 - Terra Select T 4 - EggersmannT 50 - Terra Select T 5 - Eggersmann T 55 - Terra Select T 6 - Eggersmann T 60 - Terra Select T 7 - Eggersmann T 70 - Eggersmann T 80 also Doppstadt, Pronar, Komptech , Mc Closkey... Bespoke maded drums are our specjality. In case of any question, please contact me by mobile or e-mail..

Condition: as good as new (ex-display), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 570001809, pressing force: 14 t, bale weight: 170 kg, filling opening width: 800 mm, filling opening length: 1,200 mm, bale length: 900 mm, type of input current: three-phase, bale height: 600 mm, bale width: 800 mm, overall weight: 1,330 kg, HSM 12 Gigant horizontal baling press Our HSM 12 Gigant is in its element anywhere where voluminous cardboard packaging, plastic film or other materials need to be pressed. The extremely large loading aperture makes the unit simple and convenient to load. The result is compact bales which can be easily transported. And if the baler is required urgently in another part of the company – no problem: its 4 castors mean that it can be used anywhere at any time. Pressing power: 140 kN Specific pressing power: 29,16 N/cm² Driving power: 7,5 kW Voltage / Frequency: 400 V / 50 Hz Cycle time when idling vacío: 30 s Volume throughput in idle operation (theor.): 10,63 m³/h Loading height: 780 mm Loading aperture width x Loading aperture length: 800 x 1200 mm Bale width x Bale height x Bale length: 800 x 600 x 900 mm Bale weight: 170 kg Method of loading: manual Length x Width x Height: 4263 x 1030 x 1623 mm Weight: 1330 kg Cgsb Eeufi A Ijndqtst Type of consumables: Strapping tape Press material: Plastic film, Mixed paper, Cardboard, Getränke und Aluminiumdosen

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, pressing force: 30 t, Baler paper baler Bramidan Bramin B30 W, year of manufacture 2021, weight 1640 kg, for cardboard/plastic film/paper, motor 4 kw 400 volt, pressing force 30 tons, cycle time 43 sec, dimensions HxWxD 3350x2080x1270 mm, feed opening WxH 1525x560 mm, transport height 2350 mm, machine is equipped with Bra-In App, Ser.No.437524, very good condition Cjbjq Rt Dde Endqtsgt

Condition: good (used), Year of construction: 2006, operating hours: 9,300 h, The HAMMEL pre-shredder is versatile in the shredding of materials such as waste wood, rootstocks, green waste, bulky, commercial and household waste as well as in the processing of car bodies, old tires, aluminum profiles and light metals. Thanks to its robust and clear design, the HAMMEL shredder is a reliable working tool. It is equipped with two slow-running, intermeshing tool shafts that rotate at a maximum speed of 43 rpm. Cobsu S R Rms Endqtegt

Condition: ready for operation (used), Screening machine Haver Böcker Type: Heavy duty Dim. screen: 4500 x 1200 mm – 2 decks. Driving: E-Motor 21kW. Cgeb Endqov Swp Ujtjt

Condition: ready for operation (used), Archive photo Machine is currently being refurbished, delivery time 3 months Sorting machine for sorting out all non-ferrous and ferrous metals The machine can sort out ferrous metals separately, ferrous iron does not have to be separated out beforehand. Test sorting in the Habdaufkege process possible. The machine will be demonstrated in working order. The sale is without guarantee and warranty, commissioning possible worldwide for an additional charge. Cgob Eoiqk Aqondqtjt

Year of construction: 2003, operating hours: 1,990 h, Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: BACKHUS 16.50 337 03, Machine: Machine no.: 16.50 337 03 Year of construction: 2003 Operating hours: approx. 1,990 Equipment: hydraulic joystick Air conditioning (new) SBA protective ventilation (particle dust filter in cab roof) Cab console with quick-change system (new) Special equipment: ORKAN rotor ventilation system (patent pending) (up to 4,000 m³/h fresh air intake during the transfer process) meetra Rhino rotor with 50 tools (W 150 x L 300 mm) can be used on both sides A camera with a 7 inch screen allows the driver to view the rotor, making it possible to adjust the optimum rotor speed to the material to be rotted. Condition: very good, service (new), track drive (new), rubber pads with quick-change system (new), track clearer overhauled, hydraulic hoses (new), frame sandblasted - repainted in RAL 6021 + 3027 Technical data: Width of windrow up to: 5.0 m Windrow height up to: 2.4 m Windrow cross-section at 45°: 6 m² Transfer capacity up to: 3,000 m³/h Feed speed: 0- 50 m/min Work dimensions: Height 4,500 mm Width 5,200 mm Length 4,780 mm Cob Endqokqxn Iotjgt Transport dimensions: Length: 2,550 mm Width: 7,150 mm Height: 3,150 mm Engine: Cummins QSC 8.30 lt, 6-cyl. 209 kW / 280 hp Weight: approx. 10,000 kg Engine: Machine-No.: 16.50 337 03 Year of built: 2003 working hours: approx. 1,990 hours Equipments: hydraulic joystick Air conditioning (new) Protective ventilation SBA (particulate dust filter in the cab roof) Cabin console with quick-change system (new) Special equipments: ORKAN Rotor ventilation system (Patent pending) (up to 4.000 m³/h Fresh air entry during the implementation process) meetra Rhino-Rotor with 50 tools (W 150 x L 300 mm) both sides usable A camera with a 7-inch screen gives the operator a view of the rotor. This makes it possible to adjust the optimum rotor speed to the rotating material. Condition: very good, service (new), chain drives (new), Rubber padding with quick-change system (new), track clearer revised, hydraulic hoses (new), Frame sandblasted - repainted in RAL 6021 + 3027 technical Data: Heap width up to: 5,0 m Heap height up to: 2,4 m Heap cross-section at 45°: 6 m² Displacement capacity: 3,000 m³/h Foreward speed: 0- 50 m/min Dimensions of work: height 4,500 mm width 5.200 mm length 4.780 mm Transport dimensions: Length: 2,550 mm Width: 7,150 mm Height: 3,150 mm engine: Cummins QSC 8.30 lt, 6-cyl. 209 kW / 280 hp Weight: approx. 10,000 kg

Condition: used, Year of construction: 1997, Technical specifications of horizontal automatic Press Model Konti 275 D Manufacturer: PAAL, Germany Press force: 75t Channel cross-section 75x110 cm. Feed opening 102x155 cm. Filling volume approx. 2.0 m3 Binding vertically 5 wires Drive power 45 kW Material throughput • Density 35 kg/m3 9.5 tonnes/hour. • Density 60 kg/m3 16.5 tonnes/hour. Cgjb Endqov Svkketjt • Density 100 kg/m3 26 tonnes/hour. Bale weight from 500 to 750 kg. Adjustable bale length Bale size (WxH) 75 x 1100 mm Press weight 25 tonnes Press dimensions see brochure Year of manufacture 1997. Operating hours, approx. 40,000 hours

Condition: excellent (used), Year of construction: 2018, type of input current: three-phase, A large capacity briquetting machine in really excellent condition, with unique history and specification. The Silo is equiped with reverse jet air cleaning as was installed in a bank secure clean room . The unit was used infrequently for briquetting paper/cotton bank notes after security destruction and shredding. The unit was always maintained in perfect order regardless of expense, and has only had small number of hours of use since installation. This unit pushed the two lines of briquettes into a skip, but originally design is to drop briquettes into boxes or Big Bags as in illustration. There are two compression units , one either side of the 4 cu metre silo . There are two independent hydraulic units driving the two press units, and the silo has a moving bottom agitator to keep the materials flowing to the press units. All the equpment is in perfect working order with a modern electrical control panel included. Complete and ready to go with capacity og 600 kgs per hour ( depending somewhat on the materials to be briquetted) . Currently dismantled and in store, but with all complete detailed operating and maintenance manuals. Csb Endqev Su Uhetogt

Condition: new, Year of construction: 2025, Functionality: fully functional, Aluminum inclined conveyor belt with substructure including adjustable feet and machine feet to level uneven ground. - Feed height: 300 mm - Ascending section: 4,500 mm - Discharge height: 3,000 mm Design: Aluminum construction - Double reinforced profile 90 x 45 mm - Full-surface removal plate Drive roller + idler roller made of S235 steel, welded and machined Ø100 x 520 mm, crowned, shaft secured with clamping bearings. Drive: 0.55 kW slip-on gear motor, speed 0.3-0.5 m/sec Connection: 230/400 V, 50 Hz, protection class: IP54 Drive ready for connection to the motor terminal box (Commissioning must be carried out by a qualified electrician) Polyurethane conveyor belt DM 15/2 0+005 PU including sidewalls and cleats, PU industrial belt, matte petrol Conveyor belt width: 500 mm 2 sidewalls, 50 mm high, 25 mm wide, flush with the edges, high-frequency welded Belt material: 2-ply, particularly stable laterally 23 T40 cleats welded centrally, pitch approx. 400 mm Due to the sidewalls on both sides, the usable width of the conveyor belt is reduced: Usable width 450 mm, calculated as follows: (Top view) Transverse arrangement 25+450+25mm We always have various systems of this type in stock. The delivery time for a customized system is currently approximately 3-4 weeks, depending on the production effort. Our core competence lies in providing customers with exactly what they need. Cgob Enjv Su Stsdqtet We work with our customers to develop customized, individual solutions and supply corresponding systems from our own production facilities. Please feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastic, metal-free metal detection, neodymium, overband magnet, magnetic belt separator All prices are net prices plus 19% VAT. All information is subject to change without notice, only while stocks last!

Condition: ready for operation (used), Ventilator Radial Brand: Radial Ceb Endsv Swqfjqtsgt Driving: 19 kW

Condition: refurbished (used), Metal sorter also can measure Va via induction and magnetizability demonstration machine base body of 2018 sorting technology of WMS 2008 also suitable for slag shredder rest etc. Cgeb Endqspgurvjtjt

Year of construction: 2002, operating hours: 3,500 h, Condition: reconditioned (used), machine/vehicle number: BACKHUS 16.50 308 03, Gewicht / machine weight: approx. 10 t Transport dimensions / Transport dimensions: Breite / Width: 7,150 mm Length: 2,550 mm Working dimensions: Width: 5,200 mm Length: 4,780 mm Height: 4,500 mm Diesel engine: Cummins, QSC8.3-C260 Rotor diameter / Ø Rotor: 1,200 mm Coboqqidhs Endqtsgt Rotor length / Rotor lengh: 4,380 mm Clearance height: 2,200 mm Heap width: 5,000 mm Heap height: 2,400 mm Heap cross section at an angle of repose of 45°: 6 m² Heap cross section: 6 m² Heap displacement / longitudinal heap displacement approx.: 2.5 m Turning radius: 3,100 mm Grain size: 0 - 300 mm Foreward speed: 0 - 50 m /min Displacement capacity: 300 - 3,000 m³/hours Baujahr / Year of build: 2002 Betriebsstunden / Working hours: app. 3.500 h Zustand / Condition: Sehr gut / very good, Service neu / service new, inkl. Farbaufbereitung