Used veneer presses for sale (141)

Condition: used, Technical specifications: Number of pistons: 4 Piston diameter: 60 mm Shelf dimensions: 1000x2500 mm Clearance: 480 mm Chjdpozh U N Hjfx Agrjd Hydraulic clamping system Safety switch Motor power: 1 kW Power supply: 400 V Overall dimensions: Length: 2800 mm Width: 1220 mm Height: 1980 mm

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Codozuzw Depfx Agrshd Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: refurbished (used), functionality: fully functional, Refurbished, four-piston hydraulic platen press of Italian manufacture. Branded veneer press for easy veneering of wood. Dimensions of veneer sheets: 2500 x 1300 mm Pressure at full area: 2.5 kg/cm2 Total maximum pressure: 80 tons Number of hydraulic pistons: 4 MYLAR Teflon film on the platens Preparation for heating the platens with water Option to install a hot water boiler Price: 6,630 EUR excluding VAT The condition after refurbishment and the machine's readiness for delivery must be verified in advance! Csdpjyi U Rnsfx Agrohd In stock in Telnice near Brno, Czech Republic. Testing, demonstration of the machine, and operator training are standard services.

Condition: new, Year of construction: 2026, Table size: 4000mm x 1500mm Pump working pressure: -0.85 bar Vacuum pump: Becker Cjdpfo Af Hm Njx Agrshd Vacuum pump capacity: 40 m³/h Reservoir: 100 l Noise level: less than 70 dB Machine length: 4100 mm Machine width: 1650 mm Machine width when folded: 850 mm Weight: 650 kg

Condition: excellent (used), Year of construction: 1997, I sell the press for veneer and foil ORMA NPC-30 4-40 2500 x 1200. Product size max. 2500 x 1200mm Oil heating. Total power 21,7 KW at maximum. Chodpfxeu E E A To Agrjd Very good condition. Available immediately.

Condition: refurbished (used), Year of construction: 1983, machine/vehicle number: 11549, functionality: fully functional, power: 12.8 kW (17.40 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 120 t, table width: 800 mm, table length: 1,600 mm, total length: 2,300 mm, total width: 1,000 mm, year of last overhaul: 2024, Press 1600x800 mm – 120 T Chodpoztxlijfx Agrsd Press force: 120 T Dimensions: 1600x800 mm Vertical opening (daylight): 1040 mm Machine number 11549 Year of manufacture 1983 Busse electric heating plates (2024) - 12.8 kW electric - Maximum temperature: 180 °C Inspected by DV Hydraulics in 2024

Condition: good (used), Code: 0479 Brand: SIPA Model: S20F Hydraulic cold press for panels, doors, furniture, timber, composite materials, engineering materials, plastics, aluminium and other materials Steel frame Platen dimensions 2500 x 1300 mm Chedpfxsz Atwrj Agrjd Platens opening 500 mm Total pressure 20 t N° 2 cylinders diameter 40 mm Motor power 1,5 Hp Overall dimensions mm 2800 x 1300 x 2110 h Weight kg 740

Condition: like new (used), functionality: fully functional, HOT PRESS with electric heating of plates , model ORMAMACCHINE NPC/E/DIGIT6/90 second hand machine working condition: excellent for wood, corian, joinery, furniture, custom furnishings, panels, doors, composite materials, and more maximum temperature: 140°C CE-certified machine plate dimensions: mm. 2500 x 1300 electric plate heating n.6 pistons, diameter: mm.70 opening: mm.400 total thrust: 90 tons automatic opening with timer pressure: 3.3 kg/cm2 n.4 racks for smooth movement of the lower plate Codszwphpspfx Agrohd hydraulic motor power : Hp 2 electric plates: Kw 17,8 overall dimensions: 3300 x 1550 x 1900 mm weight: 2800 kg volts 400/50 total installed electrical power Kw 22,5 ability to set separate temperatures for the plates daily programming for automatic turning on the machine heating the plates are composed of a chipboard support and a 12 mm thick aluminum plate containing the heating elements. the Digit series is equipped with an electronic control panel for managing the pressing parameters (temperature, pressure, and closing time)

Condition: new, Year of construction: 2026, NPC/DIGIT 6/95 Cedj Afat Nspfx Agrshd Serpentine heating plates, 3000 x 1300 mm Movable lower plate No. 6 hydraulic cylinders, diameter 70 mm Cylinder stroke and press opening 400 mm Total pressing force 90 tons Digital control Electric boiler, 18 kW, for thermal oil heating Location: ex works - available for immediate delivery -

Condition: excellent (used), Great deal, in excellent condition, 2550/1300, from a Swiss liquidation sale. 6-cylinder engine, electric heating plates, 98-ton capacity, safety cable. Cjdpfozw Udcsx Agrshd

Condition: used, Technical specifications: Number of pistons: 2 Piston diameter: 80 mm Connection to central heating system Shelf dimensions: 1000x2500 mm Clearance: 440 mm Hydraulic pressure: ~2kg/cm2 Emergency stop switch Motor power: 2 kW Codsymyc Dspfx Agrjhd Power supply: 380 V Overall dimensions: Length: 3400 mm Width: 1400 mm Height: 1850 mm

Condition: good (used), Code: 0478 Brand: ITALPRESSE Model: V/2 Mechanical press for cold gluing Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2200 x 1000 Opening mm 650 Cjdpfx Aozz Szaogrshd Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2550 x 1000 x 1650 h Weight kg 750

Condition: used, Year of construction: 1979, Pressing area: 2200 mm x 1100 mm Opening: 360 mm Heating: electric Plate surface: aluminium Emergency stop: no Pressing force: 65 t Number of cylinders: 4 Power consumption: 21 A Machine length: 2500 mm Cedpfx Agey A Hkborohd Machine width: 1300 mm Weight: 2600 kg

Condition: used, Year of construction: 1970, Year of manufacture: 1970 Total pressing force at 320 atü: 80 tons Pressing cylinder: 6 pistons Motor power: 1.1 kW Heating-up time approx. 20 min. Cjdpswx Rrnsfx Agrohd Price ex works.

Condition: like new (used), machine/vehicle number: 6684, Shelf length: 3000 mm Shelf width: 1300 mm Number of cylinders: 6 6 pneumatic side clamping devices Cjdpfxezr Ipzs Agrohd Water heating Safety switch with shear pin

Condition: as good as new (ex-display), Year of construction: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Chsdpfou Egp Iox Agred Noise level: 70 Db Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1750 mm Weight: 950 kg

Condition: good (used), Code: 0374 Brand: ITALPRESSE Model: V/4 Mechanical cold press for wood, panels, doors, furniture, composite materials, technical materials, plastics, aluminium and various other materials Working dimensions 2200 x 1000 mm Platen dimensions: n° 2 platens 1100 x 1000 mm NEW aluminium sheets Option to work on a single table or on separate tables Opening 650 mm N° 4 pressure screws Cjdey If Rwepfx Agrshd N°2 motors 0,75 Hp each Overall dimensions mm 2550 x 1000 x 1650 h Weight kg 870

Condition: used, used, good condition Manufacturer Joos Model HP65/2 1 level Plate size approx. 2500 x 110 mm Opening width approx. 360 mm Chedpfxjyu U Evj Agrsd Side guide Electric heating Aluminium plates Piston diameter 80 mm 4 lower pistons Space requirement approx. 2900 x 1300 x 1900 mm Weight approx. 3200 kg Total connected load 15.4 kW Storage location 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in as-inspected condition, without warranty or guarantee

Condition: excellent (used), functionality: fully functional, overall weight: 4,000 kg, shelf length: 3000 mm shelf width: 1300 mm water heating 6 hydraulic cylinders cylinder diameter: 70 mm Chodpfx Ajzgf Tyjgrod safety switch – shear pin Weight: 4000 kg

Condition: used, used, in good condition Manufacturer: Joos Model: HP65/2 Machine no.: 79/9 510 1 deck Cover plates - natural aluminum GS tested Panel size: 2500 x 1100 mm Opening width approx. 360 mm Tip control Safety device: foot rail - shutdown Side guide Chjdpeyu U D Ssfx Agrjd Electric heating Piston diameter: 80 mm Lower pistons: 4 units Space requirement approx. 2900 x 1300 x 1900 mm Weight approx. 3200 kg Total connected load 15.4 kW Stock location: 97447 Gerolzhofen, loaded free, unpacked Delivery in current condition as inspected, without guarantee or warranty

Condition: used, functionality: fully functional, Manni shelving press for veneering, 2500×1300 Shelf length: 2500 mm Codpozmh Ndsfx Agrshd Shelf width: 1300 mm Feed height: 410 mm Working pressure: 300 bar Press with 4 cylinders

Condition: good (used), Code: 0419 Cjdpfx Aszcfdfegrjhd Brand: ITALPRESSE Model: V/2 Electric press for cold gluing of doors, furniture, panels, composite materials, technical materials, plastics, aluminum, various materials Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2500 x 1200 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2850 x 1200 x 1650 h Weight kg 880

Condition: like new (used), shelf length: 3000 mm shelf width: 1300 mm Cedpfx Agezlgm Sorshd clearance between shelves: 30 cm water heating system 6 hydraulic cylinders safety shear pin

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Cjdpfjxgpaqox Agrehd Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg

Condition: good (used), Code: 0120 Brand: ORMAMACCHINE Model: NPC/3000S - CE Standard Hot press with diathermic oil for wood, veneer, wood panels, coated panels, veneer, composite materials, cork, aluminium and various materials - CE Standard Platen dimensions mm 3000 x 1300 Thrust ton 70 N° 6 pistons Opening mm 400 Chodjzil Ipspfx Agrod Motor Hp 2 Heating with diathermic oil by electric boiler Mylar-coated platens Overall dimensions: mm 3600 x 1550 x 1900 h Weight kg 3500