Veneer press

Joos HP65

Condition: used, Year of construction: 1989, pressing area: 2500mm x 1100mm opening: 400mm heating: elektrisch plate surface: ALU - Gold eloxiert Emergency stop switch: yes pressure: 65t number of cylinder: 4 electricity: 22A Dwedpjyl Tinsfx Alfjd machine length: 3500 mm machine width: 1300mm weight: 3000kg

Condition: used, Year of construction: 1997, working width: 630mm Dodpjwbqi Sjfx Alfewd feed: 7m/min

Condition: used, Year of construction: 1972, Second-hand machine Year of manufacture: 1972 Features and technical specifications: - Pressing surface 2500 x 1100 mm - Total pressing force: 650 kN - Opening width: 400 mm - Number/diameter of cylinders: 4/80 mm Dodpfxjzk N U No Alfjwd - Operating pressure: 325 bar - Closing time: approx. 16 sec. - Panel type: aluminium / natural - Thickness: approx. 51 mm - Power rating per heating plate: approx. 6.8 kW - Heating-up time to 90°C: approx. 16 mins. - Dimensions: 2900 x 1300 x 2050 mm - Weight: approx. 2,900 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: used, used, good condition Manufacturer Joos Model HP65/2 Dwjdpsyu U Evofx Alfjd 1 level Plate size approx. 2500 x 110 mm Opening width approx. 360 mm Side guide Electric heating Aluminium plates Piston diameter 80 mm 4 lower pistons Space requirement approx. 2900 x 1300 x 1900 mm Weight approx. 3200 kg Total connected load 15.4 kW Storage location 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in as-inspected condition, without warranty or guarantee

Condition: excellent (used), Hydraulic Veneer Press with Medium Heating Plates Under-piston design Medium heating plates for connection to the hot water system Central control panel with all operating elements Analog temperature display for the heating plates Pressing pressure can be infinitely adjusted via pressure switch two-stage hydraulic pump Rack compensation Main switch Safety pull cord CE marking Pressing area: 2550 x 1350 mm Opening height: approx. 350 mm Number of pressing cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3,200 kg Note for Used Machines: • Subject to technical changes and prior sale. • All prices quoted are ex-works - free loading! • The machines have been cleaned and functionally tested. Dwedpfx Aloy Egkgefed • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements must be made in writing. (Inquiries will only be answered upon receipt of your address and telephone number!)

Condition: used, used, in good condition Manufacturer: Joos Model: HP65/2 Machine no.: 79/9 510 Dedpfxsyu U D Ss Alfswd 1 deck Cover plates - natural aluminum GS tested Panel size: 2500 x 1100 mm Opening width approx. 360 mm Tip control Safety device: foot rail - shutdown Side guide Electric heating Piston diameter: 80 mm Lower pistons: 4 units Space requirement approx. 2900 x 1300 x 1900 mm Weight approx. 3200 kg Total connected load 15.4 kW Stock location: 97447 Gerolzhofen, loaded free, unpacked Delivery in current condition as inspected, without guarantee or warranty

Condition: good (used), Year of construction: 1981, HOT PRESS PLATE DIMENSIONS: 2500 X 1300 MM HEATING OF THE PLATES BY HOT WATER Dodpjwup U Hjfx Alfjwd 6 HYDRAULIC CYLINDERS FROM THE BOTTOM SIDE MAX. OPENING BETWEEN PLATES: 450 MM TOTAL PRESSURE: 120 Tons GOOD CONDITION

Condition: used, Wide belt sander Bütfering, year of manufacture 1985, not so good condition, including pneumatic sanding shoe, electric table lift, 1350 mm table width, connected load 40A, approx. 2,200 kg Dedpfx Aevrvlhslfowd Prices subject to change, errors, printing and typesetting errors reserved

Condition: good (used), Year of construction: 1990, Working width: 220 mm Working height: 120 mm Number of spindles: 5 Spindle arrangement: bottom / right / left / top / bottom Motors: 7.5 KW, 11 KW, 11 KW, 11 KW, 7.5 KW Table lubrication Feed drive: 2.2 KW Feed speed: 6/22 m/min Year of production: 1990 Machine dimensions: - Length: 4400 mm - Width: 1700 mm - Height: 1250 mm - The machine comes with 4 heads mounted on the spindles ( 2 x 180 + 2 x 120 mm ) Dodpfsy Hf A Rjx Alfswd - The machine comes with lots of extra tools / heads / infeed wheels / Keys

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit Dedpfoq Ii Dlsx Alfswd The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.