Used Thread Cutting Arm for sale (26,011)

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition Psdoupbf Dopfx Adnjrd

Condition: ready for operation (used), functionality: fully functional, overall weight: 785 kg, total width: 1,015 mm, total length: 1,570 mm, total height: 1,270 mm, type of input current: three-phase, input voltage: 380 V, metric thread diameter (max.): 80 mm, metric thread diameter (min.): 16 mm, thread length: 450 mm, rotational speed (min.): 14 rpm, rotational speed (max.): 94 rpm, metric thread pitch (max.): 6 mm, metric thread pitch (min.): 2 mm, HMV thread cutting machine, type OK-5 Specifications Thread cutting range (Whitworth/UNC) 5/8"- 3" Thread cutting range (BSP) 1/2"- 4" Thread cutting range (Metric) M16-M80 Number of speeds 8 Speeds, rpm 14,20,28, 32, 40, 48, 64, 94 Motor output, hp 2.7 - 4.5 Motor output, kW 2.3 - 3.0 Motor speed, rpm 700 / 1400 Spindle bore, mm 118 Spindle bore, in 4 21/32" Max cutting length without relocation, mm 450 without relocation, in 17 3/4" with relocation infinite Dimensions and weight Overall length, mm 1570 Overall width, mm 1015 Overall height, mm 1270 Height from floor to bed, mm 830 Width of bed, mm 370 Prsdpfx Aexz R Husdnsd Required floor space, mm 1570 x 1015 Bed size (L x W), mm 815 x 580 Net weight, kg 785

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, Set includes two thread cutting machines No.1 - REMS UNIMAT 75 (1985) equipped with a set of cutters and heads as per the attached PDF. Version with hydraulic vice. No.2 - REMS UNIMAT 75 (1992) backup machine, partially non-functional due to removed contactors, to be repaired/commissioned. Pjdpfexyi E Tox Adnjrd

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -Tapping chuck: thread cutting attachment -Cutting performance: -Recording: MK3 -Bore: Ø 23 mm -Quantity: 2x thread cutting chucks available -Price per piece Pjdpfx Aervlfrodnsrd -Dimensions: Ø 110 x 325 mm -Weight: 8,0 kg/pc.

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor Prjdpfx Aev T Truodnjd - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: good (used), Max. drilling capacity ∅20 mm/ 600 N/mm2 Total stroke 125 mm Working stroke, continuously adjustable 125 mm Feed force at 6 bar 4130 N Max. transferable. Torque 80 Nm Prsdpfx Adjvxryhsnod Speed range at 50 Hz 360–5800 min-1 Speed range at 60 Hz 432–6960 min-1 Max. permissible speed 8000 min-1 Feed rate 30–2400 mm/min Air consumption 0.45 l/cm stroke Concentricity 0.01 mm Tool holder – standard ISO 30 / HSK 50 Inductive limit switch 24 V Normal voltage 230/460 V Motor speed at 50 Hz 2900/1450/970 min-1 Motor speed at 60 Hz 3480/1740/1160 min-1 Motor power at 50 Hz 1.5 kW / 1.1 kW Motor power at 60 Hz 1.8 kW / 1.3 kW Weight / color 73 kg / RAL 5012

Condition: used, Table Drilling and Thread Cutting Machine IXION Type BT 15 GL Machine no.: Year of manufacture approx. 1975 Drilling capacity: 15 mm Spindle mount: Taper B 16 Thread cutting range: M 2.5 to M10 Throat depth: 200 mm Quill stroke: 90 mm Table size: 285 x 220 mm Column diameter: Ø 75 mm Spindle speed: 320–1600 rpm, 4 steps Motor power: 0.55 kW Power connection: 380 Volt, 50 Hz - Spindle speed adjustable in 4 belt stages - Equipped with FAHRION GH 10 tapping attachment - With thread pitch guide bush, operation without guide bush also possible - Drill head height adjustment via hand crank Pedpfx Aowk Nxqjdnsrd - Column lowers from table plate for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition

Condition: excellent (used), Year of construction: 1983, TOYOSK 01CC-T 36-spindle Thread cutting machine with fixed spindle and Manufacturer: TOYOSK Type: 01CC-T Year of manufacture: 1983 Number of spindles: 36 Three-speed gearbox: 520rpm, 850rpm, 1330rpm Prodpfx Adjwh Sh Nenjd Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: good (used), Hagen & Goebel - HG 22 EB / Thread Cutting Machine - Model HG 22 EB Podpoxvig Nefx Adnsrd - Speed range: 180-1120 rpm - Table dimensions: 600x500 mm - Foot switch Dimensions: LxWxH 1.1x0.7x2 meters / Weight 900 kg Subject to errors and omissions.

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Tapping chuck: MK2 mount Prsdpfx Aexrmp Todnjd -Cutting performance: -Bore: Ø 10 mm -Dimensions: Ø 55 x 200 mm -Weight: 1.4 kg

Condition: excellent (used), Thread cutting steel (108141) Psdeigqr Repfx Adnsrd Make Comet Type FG 2 for external thread With threaded steel 60 degrees and threaded steel 55 degrees in wooden case

Condition: good (used), Arm length: 2x1800mm Psdpstxpgvefx Adnerd

Condition: used, Thread cutting machine LORCH, SCHMIDT & Co Centre height: 200 mm Centre distance: 400 mm Spindle speed: 56 rpm Chuck diameter: 160 mm Tailstock quill travel: 45 mm Tailstock taper: MK2 Motor power: 0.25 HP Power supply: 380 Volt, 50 Hz - Right- and left-hand rotation - 3-jaw chuck Prodpfx Aexf Uwxodnjd - Spindle drive via geared motor - Without through spindle bore - Tailstock with lever quill - Drill chuck MAS 1 to 16 mm Required space (L x W x H): 1200 x 500 x 420 mm Weight: 80 kg Good condition

Condition: used, 86 sets available (2 pcs. per set)different sizesmore information under "Download" Psdpjdc A Saofx Adnsrd

Condition: new, – Capacity M5–M36 – Hydraulic – Working range 2050 mm – Rotatable head – Quick-change chuck – Infinitely variable thread cutting speed – Infinitely variable return speed – Digital speed display Prjdpfx Adsxtq Shjnsd – Includes 14 thread cutting inserts – Heavy-duty work table with T-slots – Lubrication system with manual or automatic function – Emergency stop switch – Documentation – 400V

Condition: good (used), Thread cutting machine, pipe thread cutter Podpfxowub Eke Adnerd -Manufacturer: Ridgid, thread cutting machine type 535 -Pipe size: 1/8 to 2 inches -Spindle bore: Ø 64 mm -Operating voltage: 230 volts -Dimensions: 1080/700/H1140 mm -Weight: 128 kg

Condition: good (used), Year of construction: 1980, Vertical Internal Thread Cutting Machine Hagen & Goebel Model HG 124 N Machine No. 4063 Year of manufacture: approx. 1980 Thread cutting capacity in steel: M3 to M12 x 1.5 Thread cutting capacity in light metal: M3 to M28 x 1.5 Throat depth: 250 mm Quill stroke: 80 mm Table size: 345 x 245 mm Spindle speed: 200 - 1000 rpm Motor power: 0.55 / 1.0 kW Power supply: 380 Volt, 50 Hz Pjdpfoxq Tlfox Adnerd - 6 speed settings via belt change (3 speeds via belt + 2 motor speeds) - Thread pitch via guide cartridge - 2 guide cartridges with 0.8 mm and 28 TPI thread pitch - Table height adjustment with rack and pinion via handwheel on the round column - Spindle mounting with taper Ø 14.8 to 16 mm Required space (L x W x H): 900 x 500 x 1800 mm Weight: 260 kg

Condition: excellent (used), ROLLER THREADING MACHINE KING2 SET C R1/2-2. Predpfx Adevgng Hjned Threading machine, electric Design: sturdy, maintenance-free gearbox with special ratio for perfect power transmission, left/right handed, with thermal overload protection and emergency stop. Self-reinforcing clamping effect by diagonal adjustment of the clamping screw. Stable torque support for torque support in both directions of rotation. Easy and quick replacement of cutting heads. Unique locking of the cutting head in the ratchet lever, guaranteeing secure seating during threading. Supplied with Central cutting heads and carrying case.

Condition: new, Year of construction: 2025, - Thread cutting device Podpfsfx U D Asx Adnord - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Continuously variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drilling protection with electric. Protection - Connection cable with Schuko plug TECHNICAL DATA - Spindle: B16 - Drilling depth: 60 mm - Projection: 220 mm - Column diameter: 70 mm - Spindle/work surface: 140 – 315 mm - Drill head height adjustment: by hand - Speed display: digital - Drilling depth display: digital - Feed (mm/revolution): by hand - Spindle speeds continuously variable: 60 – 6,000 rpm - Continuous/normal drilling capacity: 10/12 mm - Thread cutting capacity (depending on pitch): M6 - FACTORY WARRANTY: 3 years (single shift) - OPTION drilling package 1 (No. 296570) Machine vice Flott [felix] 2.0 80 and keyless drill chuck 1-13 mm (accuracy 0.17 mm) Price: € 275,- - FREE DELIVERY (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, thread dia. M6 - M36 mm turning speeds 156 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450136SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Prodpfog N Nl Ijx Adnod Risk of breakage - Right-left rotation can be selected on the machine head - Setting of thread size, speed, pitch and cutting depth via Touchscreen on the swivel arm - Manual mode: the stops after the set cutting depth is reached Spindle automatic, forward and reverse must be activated manually. - Automatic mode: changes after the set cutting depth is reached the machine automatically from the forward to the return - ideal for that Thread cutting of several blind holes Incl. 1 each GT12 M6, M8, M10, M12, M14, M16, M18, M20, M22-24, M27, M30, M33, M36 Substructure 900 x 600 x 875 mm

Condition: used, Thread cutting chuck, thread cutting head WMW type GSA 2 Taper: MT 2 Threading capacity: M 5 - M 16 - Adjustable slip clutch Net weight: 3 kg Automatic right/left rotation with holding bar. Psdjxf Uymspfx Adnerd The machine does not require its own reversing function. The tap is clamped at the shank and the square with adjustable drivers. Both drivers are missing (but can be manufactured relatively easily) For cutting right-hand threads.

Condition: excellent (used), Thread cutting steel (28397) Predpfx Aomk E Ubednsd Make Komet type FG II 60 degrees with steel holder type RB ST III unused, from magazine

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment, two-jaw thread cutting chuck -Manufacturer:Röhm, two-jaw tapping chuck MK3 -Type: MK3 B24 -Tool holder: square up to 24 mm see photos -Dimensions: Ø 85 x 245 mm -Weight: 4.4 kg Pedpfx Aoxdw Svodnord

Condition: new, thread dia. M6 - M24 mm turning speeds 200 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Pedpog N Nl Dsfx Adnerd Electric tapping machine / 4450124SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting the parameters via touch display on the swivel arm - Both manual and automatic switching from forward to backward to reaching the entered Incl. 1 each GT24 M6, M8, M10, M12, M14, M16, M18, M20, M22-24 tapping chuck Substructure 900 x 600 x 875 mm

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, thread cutting attachment Pedpoxdwrpjfx Adnsrd -Tapping chuck: Tapping attachment -Recording: MK3 -Bore: Ø 13 mm -Dimensions: Ø 72 x 210 mm -Weight: 2.3 kg