Used Thread Cutting Device for sale (25,807)

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, thread cutting attachment -Manufacturer: Fahrion, thread cutting attachment GA 30 -Shaft: MK3 -Reversing gear: integrated quick return, slip clutch -Clamping diameter: max 23 mm -Dimensions: 230/125/H80 mm -Weight: 6.3 kg Bdjdpfowvfyujx Ab Tok

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, tapping attachment -Tapping attachment: Holder: MK4 -Reversing gear: Quick return integrated Bdsdpfxsv Uxb Ro Ab Tok -Clamping diameter: 21 mm -Dimensions: 260/105/H310 mm -Weight: 6.8 kg

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, tapping attachment Bdedpfov Txm Dsx Ab Tek -Manufacturer: Tapmatic, thread cutting attachment with slip clutch -Integrated reversing gear: with quick return -Recording: MK2 -Tap holder: Ø 10 mm -Dimensions: 260/160/75 mm -Weight: 2.4 kg

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, thread cutting attachment -Manufacturer: WMW, thread cutting device type GSA 1 Bedpfxjtxkuns Ab Tedk -Recording: MK1 / B12 -Reversing gear: Quick return integrated -Clamping diameter: max 6 mm -Thread cutting sizes: M2-M4 -Number: 2x thread cutting chucks available -Price: per piece -Dimensions: 125/100/60 mm -Weight: 0.7 kg

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Bedpfx Ajupbf Djb Tedk Weight 255 kg Good condition

Condition: ready for operation (used), functionality: fully functional, overall weight: 785 kg, total width: 1,015 mm, total length: 1,570 mm, total height: 1,270 mm, type of input current: three-phase, input voltage: 380 V, metric thread diameter (max.): 80 mm, metric thread diameter (min.): 16 mm, thread length: 450 mm, rotational speed (min.): 14 rpm, rotational speed (max.): 94 rpm, metric thread pitch (max.): 6 mm, metric thread pitch (min.): 2 mm, HMV thread cutting machine, type OK-5 Specifications Thread cutting range (Whitworth/UNC) 5/8"- 3" Thread cutting range (BSP) 1/2"- 4" Thread cutting range (Metric) M16-M80 Number of speeds 8 Speeds, rpm 14,20,28, 32, 40, 48, 64, 94 Motor output, hp 2.7 - 4.5 Motor output, kW 2.3 - 3.0 Motor speed, rpm 700 / 1400 Spindle bore, mm 118 Spindle bore, in 4 21/32" Max cutting length Bdodoxz R Huspfx Ab Tsk without relocation, mm 450 without relocation, in 17 3/4" with relocation infinite Dimensions and weight Overall length, mm 1570 Overall width, mm 1015 Overall height, mm 1270 Height from floor to bed, mm 830 Width of bed, mm 370 Required floor space, mm 1570 x 1015 Bed size (L x W), mm 815 x 580 Net weight, kg 785

Condition: used, Precise angles and mitres from 0° to 46°, with digital display for angle indication Location: Nattheim Bdodpfx Abswhzg Us Tsk

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -Tapping chuck: thread cutting attachment Bdjdpfx Absrvlfrj Tek -Cutting performance: -Recording: MK3 -Bore: Ø 23 mm -Quantity: 2x thread cutting chucks available -Price per piece -Dimensions: Ø 110 x 325 mm -Weight: 8,0 kg/pc.

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, Bsdpfx Abov T Truj Tjdk rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, Set includes two thread cutting machines Bdsdpfxoxyi E Te Ab Tjk No.1 - REMS UNIMAT 75 (1985) equipped with a set of cutters and heads as per the attached PDF. Version with hydraulic vice. No.2 - REMS UNIMAT 75 (1992) backup machine, partially non-functional due to removed contactors, to be repaired/commissioned.

Condition: good (used), Max. drilling capacity ∅20 mm/ 600 N/mm2 Total stroke 125 mm Working stroke, continuously adjustable 125 mm Feed force at 6 bar 4130 N Max. transferable. Torque 80 Nm Speed range at 50 Hz 360–5800 min-1 Bdodpevxryhjfx Ab Tok Speed range at 60 Hz 432–6960 min-1 Max. permissible speed 8000 min-1 Feed rate 30–2400 mm/min Air consumption 0.45 l/cm stroke Concentricity 0.01 mm Tool holder – standard ISO 30 / HSK 50 Inductive limit switch 24 V Normal voltage 230/460 V Motor speed at 50 Hz 2900/1450/970 min-1 Motor speed at 60 Hz 3480/1740/1160 min-1 Motor power at 50 Hz 1.5 kW / 1.1 kW Motor power at 60 Hz 1.8 kW / 1.3 kW Weight / color 73 kg / RAL 5012

Condition: used, Table Drilling and Thread Cutting Machine IXION Type BT 15 GL Machine no.: Year of manufacture approx. 1975 Drilling capacity: 15 mm Spindle mount: Taper B 16 Thread cutting range: M 2.5 to M10 Throat depth: 200 mm Quill stroke: 90 mm Table size: 285 x 220 mm Column diameter: Ø 75 mm Spindle speed: 320–1600 rpm, 4 steps Motor power: 0.55 kW Power connection: 380 Volt, 50 Hz - Spindle speed adjustable in 4 belt stages - Equipped with FAHRION GH 10 tapping attachment - With thread pitch guide bush, operation without guide bush also possible - Drill head height adjustment via hand crank Bedpfx Abowk Nxqs Tjdk - Column lowers from table plate for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition

Condition: excellent (used), Year of construction: 1983, TOYOSK 01CC-T 36-spindle Thread cutting machine with fixed spindle and Manufacturer: TOYOSK Type: 01CC-T Year of manufacture: 1983 Bedpowh Sh Nofx Ab Tjdk Number of spindles: 36 Three-speed gearbox: 520rpm, 850rpm, 1330rpm Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: good (used), Hagen & Goebel - HG 22 EB / Thread Cutting Machine - Model HG 22 EB - Speed range: 180-1120 rpm - Table dimensions: 600x500 mm - Foot switch Dimensions: Bjdpfx Abjxvig Nj Tedk LxWxH 1.1x0.7x2 meters / Weight 900 kg Subject to errors and omissions.

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Tapping chuck: MK2 mount -Cutting performance: -Bore: Ø 10 mm -Dimensions: Ø 55 x 200 mm -Weight: 1.4 kg Bedjxrmp Tepfx Ab Tedk

Condition: excellent (used), Thread cutting steel (108141) Make Comet Type FG 2 for external thread Bjdpfxoigqr Re Ab Tsdk With threaded steel 60 degrees and threaded steel 55 degrees in wooden case

Condition: used, Year of construction: 2000, 6 Meter weight of the machine ca. 1 t Bdedpfx Aog Sxzzeb Tjk +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Thread cutting machine LORCH, SCHMIDT & Co Centre height: 200 mm Centre distance: 400 mm Bdedpfx Absxf Uwxe Tok Spindle speed: 56 rpm Chuck diameter: 160 mm Tailstock quill travel: 45 mm Tailstock taper: MK2 Motor power: 0.25 HP Power supply: 380 Volt, 50 Hz - Right- and left-hand rotation - 3-jaw chuck - Spindle drive via geared motor - Without through spindle bore - Tailstock with lever quill - Drill chuck MAS 1 to 16 mm Required space (L x W x H): 1200 x 500 x 420 mm Weight: 80 kg Good condition

Condition: used, Technical details: cutting thickness max.: 0,5 - 70 mm infeed - automatically: 40 mm control: CNC 2050 table-size: 2x L:1500 x B: 1700 x H: 720 mm burner heads: 2 Stück weight of the machine ca.: 6,7 t Autogenous flame cutting machine with table. With corresponding additional equipment, the following processes can be performed: Plasma cutting; Plasma signing; Marking; Graining; Boring. other specifications: 2x tables: -L:1500 x W: 1700 x H: 720mm, supporting surface L: 1500 x W: 1500mm; with suction connection Ø 320 x 60mm Distance control system: -Make ZAC 2100, type 7211-2-100 V02; -size 105 x 165 x 130mm -24 VDC; torch voltage 30 - 300V; protection class IP50 -ignition height 1 - 25mm in steps of 0,2mm -cutting height 1 - 12,5mm in steps of 0,25mm -Cutting height together 0 - 20mm in steps of 0,5mm Height drive: - Linear Drive model, type 2203; 24 VDC 100 - 190 watts; stroke 220mm. Laser generator: -manufacturer Kijellberg, type HiFocus 280i, welding rectifier -Power range 10A / 84V - 280A / 192V; protection voltage IP22; cooling type AF; with 2x cooling connection 1/2". Heat exchanger: Bjdpfou Nwfujx Ab Tedk -manufacturer Kijellberg, type KWE 360 -working voltage U1 400V / 2,5A; protection type IP22; coolant of Kijellberg mixture; with 2x cooling connection 1/2". *

Condition: new, – Capacity M5–M36 – Hydraulic – Working range 2050 mm – Rotatable head – Quick-change chuck – Infinitely variable thread cutting speed Bdodextq Shspfx Ab Tjk – Infinitely variable return speed – Digital speed display – Includes 14 thread cutting inserts – Heavy-duty work table with T-slots – Lubrication system with manual or automatic function – Emergency stop switch – Documentation – 400V

Condition: good (used), Thread cutting machine, pipe thread cutter -Manufacturer: Ridgid, thread cutting machine type 535 -Pipe size: 1/8 to 2 inches -Spindle bore: Ø 64 mm -Operating voltage: 230 volts -Dimensions: 1080/700/H1140 mm -Weight: 128 kg Bjdpfx Aowub Eksb Tedk

Condition: excellent (used), ROLLER THREADING MACHINE KING2 SET C R1/2-2. Bdjdpfjvgng Hsx Ab Tjk Threading machine, electric Design: sturdy, maintenance-free gearbox with special ratio for perfect power transmission, left/right handed, with thermal overload protection and emergency stop. Self-reinforcing clamping effect by diagonal adjustment of the clamping screw. Stable torque support for torque support in both directions of rotation. Easy and quick replacement of cutting heads. Unique locking of the cutting head in the ratchet lever, guaranteeing secure seating during threading. Supplied with Central cutting heads and carrying case.

Condition: used, 86 sets available (2 pcs. per set)different sizesmore information under "Download" Bedpfxjdc A Sao Ab Tjdk

Condition: used, Year of construction: 1996, Technical details: Bdsdpsu Nwxnofx Ab Tek cutting range for steel to: 25 mm Ampere: 2 x 120 A ( 2 verfügbar) Plasma cutting system with possible welding processes: - Plasma cutting, flame gouging; TIG (TIG) on all metals and alloys; MIG on light metals and alloys and heavy metals as well as arc welding Description: - Power source: Nertajet HP 120 (220V,24V,380V,415V,440V,500V) multiple frequencies 50/60Hz ( 2 pcs available price per piece) - Torch: CPM 250 (flat electrode) 1 pc available i.D. *

Condition: used, Technical details: length: 750 mm height: 800 mm welding current: 120 machine weight ab.: 180 kg dimensions L x W x H: Schweißgerät: 0,75 x 0,52 x 0,8 m dimensions L x W x H: Kompressor: 1,2 x 0,5 x 0,9 m Plasma cutter with piston compressor optional cutting device: make Jäckle, year: 2005 - cutting power 30 kVA - TIG / E-welding - cooling type F - with torch package 6,0 meter - with ground cable 12,0 meter OPTIONAL: piston compressor: make Schneider type Universal 650-60D, year: 1993 - filling capacity 500 liters/min. - volume flow 616 liters/min. Bdodpfxju R A Dle Ab Tjk - Compressor pressure 10 bar - power max. 4 kW - incl. compressed air hose approx. 4 meters - mobile on two wheels *