Used Threading Device for sale (14,420)

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, thread cutting attachment -Manufacturer: Fahrion, thread cutting attachment GA 30 -Shaft: MK3 -Reversing gear: integrated quick return, slip clutch -Clamping diameter: max 23 mm Kledpfjwvfyuox Ah Njl -Dimensions: 230/125/H80 mm -Weight: 6.3 kg

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, tapping attachment -Tapping attachment: Holder: MK4 -Reversing gear: Quick return integrated Kedpfx Aev Uxb Rsh Nell -Clamping diameter: 21 mm -Dimensions: 260/105/H310 mm -Weight: 6.8 kg

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, tapping attachment -Manufacturer: Tapmatic, thread cutting attachment with slip clutch -Integrated reversing gear: with quick return Kodjv Txm Dopfx Ah Nsll -Recording: MK2 -Tap holder: Ø 10 mm -Dimensions: 260/160/75 mm -Weight: 2.4 kg

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, thread cutting attachment -Manufacturer: WMW, thread cutting device type GSA 1 -Recording: MK1 / B12 -Reversing gear: Quick return integrated -Clamping diameter: max 6 mm -Thread cutting sizes: M2-M4 Klsdpfxstxkuns Ah Nel -Number: 2x thread cutting chucks available -Price: per piece -Dimensions: 125/100/60 mm -Weight: 0.7 kg

Year of construction: 1968, condition: good (used), 1 used thread whirling machine for lathes make Burgsmüller type L 2 Kedpfxjpit Afj Ah Nsll serial number 68/1724

Condition: good (used), Image processing control unit, camera control -Manufacturer: Vision Device, camera controller for 2 cameras -Type: unfortunately no further type designation Kodsxvp S Ejpfx Ah Njll -Individual components/connectors: see photos -Dimensions: 200/145/H110 mm -Weight: 1.4 kg

Condition: used, Precise angles and mitres from 0° to 46°, with digital display for angle indication Ksdpewhzg Uefx Ah Nsll Location: Nattheim

Condition: excellent (used), max. width of grinding wheel 40 mm ratio u Klsdpfx Ajyb S Rpsh Nel max. dia. of grinding wheel 160 mm total power requirement 0,5 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,5 x 0,5 x 1,6 m

Condition: excellent (used), workpiece diameter 10 - 250 mm threading length 900 mm thread pitch 0,3 - 100 mm Kjdpfxeyb S Rij Ah Njll spindle turning speed range 72 / 1700 - 2540 U/min relief of the tap 0,03 - 8 mm clamping length max. 1190 mm max. module 10 workpiece turning speeds 0,4 - 160 U/min total power requirement 13 kW weight of the machine ca. 7,4 t dimensions of the machine ca. 4,5 x 2,0 x 2,1 m Many accessories.

Condition: excellent (used), thread dia. 10 - 150 mm grinding length 900 mm thread pitch max. 3 mm workpiece diameter max. 260 / 340 mm threading length max. 50 mm centre distance 1200 mm Klsdpfxeyb S N Ss Ah Nsl centre height 1100 mm grinding wheel diameter 275 - 400 mm grinding wheel width 14/20/30/40/50 grinding head-swivable, cross 4 re / 1 li ° max. stroke of grinding wheel 140 mm peripheral speed max. 35 m/sec total power requirement 14 kW weight of the machine ca. 5,8 t dimensions of the machine ca. 5,0 x 2,0 x 2,1 m

Condition: used, Threading machine, pipe threader, Ridgid 300, used machine Manufacturer: Ridgid Kledpsybbamjfx Ah Nel Type: 300 Overall dimensions: Width: 1180 mm Depth: 1250 mm Height: 1500 mm Electrical data: 230V Functions: Thread cutting, cutting to length, deburring

Condition: good (used), Thread cutting machine, pipe thread cutter Kljdpfxjx I Agps Ah Nsl -Manufacturer: Rothenberger, Thread cutting machine type Supertronic 2SE without thread cutting head -Pipe size: 1/2 to 2 inches -Spindle bore: Ø 68 mm -Operating voltage: 230 volts -Speed: 40 rpm -Foot switch: with emergency stop function -Equipment: Pipe cutter, internal deburrer -Dimensions: 500/480/H370 mm -Weight: 46.6 kg

Condition: like new (used), Year of construction: 2022, Stierli- ROTATOR 600 / 6 to 360° turning device for fast and safe turning and rotating of beams, profiles and welding components. Use for welding, plastering, fast welding visual inspection, as assembly turning device etc.... Capacity: 6 tons Swing circle diameter: 600mm (e.g. beam HEB 600) Kledpfogqgb Usx Ah Nel Length of parts: freely selectable (stands are freely positionable by means of hand pallet truck) Adjustment of working height: Steplessly adjustable The Stierli rotator was developed to turn heavy and large loads such as beams and welded constructions quickly and safely without a crane. This saves you a lot of working time and increases productivity. This welding positioner or welding manipulator works as a lifting turning device with reliable chains. The turning device is not only used for beam welding, but other cross sections can also be turned with it, such as the use as a pipe turning device. Loading is impressively simple with the overhead crane, or by means of forklift loading. The rotator can be brought into position very easily with the hand pallet truck, whereby the distance between the uprights of this welding device is freely selectable.

Condition: excellent (used), Year of construction: 2015, Roll pressure infinitely adjustable from 240 kN feeds - fine adjustment 0,5-45 mm/min turning speeds 0-80 U/min Swivel angle of the roller heads 11 ° Diameter of the roller spindles 69,85 mm Stroke - Roller screw slide 0-150 mm min. dist. - roller screws 138 mm max. dist. - roller screws 285 mm min. diameter - Rolling tools 230 mm max. diameter - Rolling tools 135 mm min. dia. 2 mm max. diameter 55 mm thread length at plunge operation 200 mm thread length at continiuous operation 2000 mm maximum thread pitch 4 mm total power requirement 14 kW Klsdjxukrqjpfx Ah Njl weight of the machine ca. 2,4 t dimensions of the machine ca. 2,0 x 2,5 x 1,9 m Rolling time continuously adjustable from: 0.1s Pause time continuously adjustable from: 0.1s Rolling spindle length: 200mm Machine bed height: 810mm Rolling spindle height above machine bed: 200 mm Height of support bearings: 115 mm Largest pitch for serrated teeth: 2.5 mm (up to 70 kg/mm2 Strength of the material)

Condition: used, Bench Drilling and Tapping Machine FLOTT Type TBZ 15 GL Serial No. 32177027 Year of manufacture: 1986 Drilling capacity: 15 mm Spindle taper: MT2 Throat depth: 195 mm Quill stroke: 80 mm Table size: 275 x 200 mm Column diameter: 70 mm Spindle speed: 80 - 4500 rpm, 18 steps Motor power: 0.55 + 0.75 kW Power supply: 380 Volt, 50 Hz - Spindle speed adjustable via 2 motor speeds, 6 belt stages from the motor and 2 belt stages to the spindle Kodpfedzp S Nsx Ah Nell - Drill head height adjustment by hand crank with rack on the column - Emergency stop - 3 guide bushings: 0.7 mm + 0.8 mm and 28G included - 1 drill chuck Ø 1.5 to 13 mm - Original metal base Space required L x W x H: 700 x 350 x 1850 mm Weight: 165 kg Good condition

Condition: used, Year of construction: 2000, Workstation with extraction and filtration system, suitable for dust extraction during plastering work with an angle grinder or also for welding operations. Klodpfoyay Rhsx Ah Nsl

Condition: used, Electric chain hoist crane DEMAG Type PM 8 - Manulift Serial No. 5319450 Year of manufacture: 1979 Load capacity: 80 kg Hook travel: 2.9 meters Distance from suspension to load hook: 700 mm Main lifting speed: 12 m/min Precise lifting speed: 2 m/min 1 fall = 80 kg Manulift hand control directly on the crane hook Mains connection: 380 Volt, 50 Hz Kjdpfx Aexcbnlsh Nell Weight: 20 kg in good condition

Condition: excellent (used), Thread plug gauges Klsdpfx Ahjipxyns Njl different sizes M 80 x6 6 H. 476,00 Euro M 80 x 6 7 H. 476,00 Euro M 64 6 H Left 340,00 Euro M 62 6 H Good& scrap 320,00 Euro M 55. x 3 6 H 240,00 Euro M 55 x 1.5 6 H 240.00 Euro M 48 x 2 6 H 240,00 Euro are also sold individually

Condition: used, length 1000 mm width 800 mm height 630 mm Kedpfx Ahsgrngds Nell weight 460 kg T-slot - width 50 mm Clamping table, clamping plate, T-slot table Dimensions Table length: 1000 mm Table width: 800 mm Table height: 630 mm T-slot length: 50 mm Weight: 460 kg

Condition: used, depth 850 mm height 2200 mm length 1100 mm weight 2125 kg flute distance 400 mm 1x clamping angle Dimension Klodpjpy R Rzsfx Ah Nsl Length: 1100 mm Height: 2200mm Depth: 850mm Weight: 2125kg T-slots: 28x50mm

Year of construction: 1987, condition: used, centre height 390 mm Kodpfxehgw Uxs Ah Noll passage of steadyrest 220 mm chucking diameter 400 mm total power requirement / kW

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle Klsdpfoyah R Nox Ah Nsl 45 Amp. - 70% duty cycle Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug - Water-cooled - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Weight: 160 kg Very good condition

Condition: used, Automatic lathe, turning machine with copy attachment UMA Type F1 NK 60 Copy lathe for chuck parts Machine no. 28-0031 Year of manufacture: 1971 Kedpfeib D H Rox Ah Njll Maximum turning diameter: 150 mm Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in machine spindle: approx. 42 mm Spindle speeds: 580 / 930 / 1480 / 2380 rpm, 4 steps Main motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gearbox steps - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying unit SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system mounted below the machine bed - Hydraulic unit positioned behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Space requirement automatic lathe (L x W x H): 2400 x 1900 x 1500 mm Space requirement hydraulic unit (L x W x H): 1400 x 850 x 1700 mm Weight automatic lathe: 2400 kg Weight hydraulic unit: 400 kg Total weight with pallet: 3000 kg In good condition

Year of construction: 2018, condition: good (used), Mould turner 10Ton Year : 2018 Ksdpfx Ahow Dtp Hj Nell

Condition: used, Dust suction hood x mm Motor output x kW Air consumption 2000 m³/h +++++ Please note: Klsdpsx U A N Dsfx Ah Nel The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++