FLAT GRINDING MACHINE

Mikromat SFW 200 PA 2

Condition: used, Rotary vane vacuum pump Oil circulation lubricated Manufacturer: Busch Type: RC 1000 B Status: Refurbished Iaedpfxocu Tirs Ah Nel Warranty: 12 months Suction capacity: ca.1000m³/h Ultimate pressure: approx. 20 mbar Operating medium: Mineral oil (Inclusive) Delivery time: 2 Wo.

Condition: good (used), Year of construction: 1985, machine/vehicle number: 1076-85, Offer 24303 Iajdpfot Dxwgjx Ah Nel Technical data: - Table size approx. 630 x 340 mm - Working range of the axes - X (longitudinal) approx. 400 mm - Y (transverse) approx. 220 mm - Z (vertical) approx. 400 mm - max. distance milling spindle - table surface 400 mm - Tool holder SK 40 - Work spindle speeds adjustable in 16 steps 45 - 2240 rpm - Mot table feeds X ; Y ; Z 6.3 - 1250 mm/min - Drive 400 V / 8.5 kW - Space requirement approx. W 1450 x H 1900 x D 1450 mm - Weight approx. 1600 kg - with: - 3 axes digital readout HEIDENHAIN - Vertical milling head tiltable - Horizontal spindle counter holder - Machine vice

Condition: used, Year of construction: 1969, grinding length 500 mm Iaedot Hwzispfx Ah Nsl grinding width 200 mm workpiece height 250 mm total power requirement 5,5 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _____ Grinding length max. 500 mm Grinding width max. 200 mm Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 - 4.500 rpm Vertical feed 0.001 - 0.01 mm/stroke Grinding spindle drive infinitely variable load 0,4 – 1,5 kW Total electrical load 5,5 kW - 380 V – 50 cycles Weight approx. 2.500 kg Accessories/Special Features: • Due to the infinitely variable speed range of the grinding wheel this design is especially suited for grinding of high alloyed steels and carbide, hardmetal, etc. • Set up switches for plunge-in or normal pendular-grinding with automatic infeed • Automatic infeed of grinding slide during surface- and/or profile grinding, (plunge-in cut)with automatic stop of infeed by contact-Gauge. • motorized rapid feed of grinding head up/down • Manual straight grinding wheel-dressing device mounted above the grinding wheel • Manual Table mounted, swivable magnetic chuck make BRAILLON size 400 x 200 mm • separate converter cabinet for infinitely variable speed regulation and with respective display of cutting speed in m/sec. • Wet grinding facility including coolant tank and bandfilter cleaning device, separate standing, • Including 3 separate flanges, some grinding wheels, service tools, etc. Condition : good – can be inspected here under power, partially reconditioned by a JUNG Specialist (table pistons, lubrication, infeed system, Dresser, covers, etc.) Delivery : ex stock – as inspected Payment : net– after completion of contract

Condition: ready for operation (used), X-travel: 500mm, y-travel: 400mm, z-travel: 350mm, quill stroke: 50mm, rotational speed: 20-5000/min, connected load: 10kVA, controls: Maho CNC 432, length: 2022mm, width: 3030mm, height: 1915mm, weight: 2.1t, operational hours counter: 29,578h, with documentation, without spare parts, mechanically and electrically the machine runs flawlessly, the control elements were recently overhauled. Iodpokn R Dhsfx Ah Noal

Condition: good (used), x-way 410 mm y-way 310 mm z-way 400 mm taper of the main spindle SK 40 table clamping surface 700 x 280 mm speed 45 - 2000 rpm quill stroke 63 mm total power requirement 2,2 kW Machine weight approx. 1300 kg Iaedpei Elydsfx Ah Nol space requirement approx. 2,1 x 2,1 x 1,7 m Voltage 400 V 3-axis digital display Heidenhain Fixed angle table Coolant device Vertical milling head swiveling

Condition: used, bore capacity in steel (diameter) 40 mm throat 325 mm Iedpfx Aewn T A Ush Noal bore stroke 170 mm table surface area 730 x 590 mm

Condition: used, Year of construction: 1985, grinding length 600 mm grinding width 200 mm Iaodowd Tx Uopfx Ah Njl total power requirement 7,5 kW weight of the machine ca. 2,3 t

Condition: used, grinding diameter 350 mm grinding length 600 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-9,99 mm/Ø 0-9,99 mm/Ø ±10 ° longitudinal feed of the table 1100 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannung kg cross travel max. 270 mm 80 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo of already delivered machine in centre distance 1000mm. -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for familiarisation. -Diagnostic function with display of PLC messages and digital I/O -Dressing function can be extended or changed at the customer's request. -Orientated spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -New stable internal grinding device diameter 80mm or 100mm with height adjustment. Ijdpfxeuxft Ej Ah Njal -Increase of the centre height to max. 225mm -Speed control for the grinding spindle Included: -Operating tool -Clamping tube for chuck Further accessories on request. The x-axis of the machine has an electronically controlled infeed system with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping clamping of individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. -Measuring control

Condition: used, TECHNICAL DETAILS - max. power : 40 [t] - max. workpiece diameter : 40 [mm] - spindle diameter : 80 [mm] - spindle length : 120 [mm] - max. tool diameter : 250 [mm] - dimensions : 2400 x 2100 x 2200 [mm] - weight : 7100 [kg] EQUIPMENT - control CNC (base Siemens) - tail stock device - coolant tank with pump Iodpfx Aouhb Uhsh Noal - 2 boring wheel 80, diameter : 260 [mm]

Condition: excellent (used), Year of construction: 1988, travel distance X-axis: 400 mm, travel distance Y-axis: 200 mm, AVAILABLE SOON! VERY WELL-PRESERVED COORDINATE GRINDING MACHINE HAUSER S 3 - YOM 1988 Ijdpov Amy Dsfx Ah Noal Table travel 400 x 200 mm Machine in excellent condition with an unusually extensive range of accessories. Rotary table can be rotated via handwheel or freely. High-precision universal table - rotatable, swiveling, and tilting Swivel range 90° - Angle of rotation readout in 5 seconds - Several grinding motors and various turbines up to 200,000 rpm with corresponding collets. Automatic feed along the U-axis with separate MY digital display Machine wiring (heating) for constant machine temperature Coolant system with splash guard Acoustic & optical proximity monitoring with headphones Centering microscope Halogen lamp Centering devices with MY clocks Hydraulic clamping of the X and Y axes Automatic central lubrication Complete documentation with circuit diagrams, etc. Machine costs less than the accessories new! Technical data is non-binding - errors excepted. Pricing: ex stock, unpacked, uninsured. Delivery time: immediately - subject to prior sale. Payment: as usual - before removal - immediately upon receipt of invoice.