Used Sliding table saws 2801-3300mm cutting length for sale (245)

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Cjb E R Dsvyuqfsy Togt

Condition: used, Martin T 60 panel saw heavy precision panel saw axis positioning control 5.7 touch screen automatic scoring unit Ceb E R Dovpupgsy Tjgt motor 5.5 kW saw blade can be tilted 0 - 46° saw blade diameter up to 400 mm edging length 3000 mm cutting width with parallel stop 1250 mm width stop adjustment automatically via NC control width stop reading via touch screen pivoting control panel above table CE version machine is WORKSHOP REFURBISHED in TOP CONDITION from Lieboch warehouse

Condition: good (used), Year of construction: 2001, Circular saw Manufacturer: SCM - Tecno Max Type: Formula S35 Year of construction: 2001 Carriage length: 3.200 mm Cjb Eorwly Uo R Dy Togt Cutting width: 1,270 mm Cutting height: approx. 103 mm Saw blade diameter: Max. 350 mm Power: 5.5 kW Scorer: Yes Motor brake: Yes Speed: 4,000 rpm Weight: approx. 800 kg

Condition: good (used), Year of construction: 2020, Functionality: fully functional, Selling panel saw Winter A45 - 3200, year of manufacture 2020 CNC Deluxe, very good condition Cgjb E R Dyjvw Tr Ns Tot

Condition: like new (used), Functionality: fully functional, Selling a complete workshop with all machines and tools as well as workbenches. There is also an extraction system in the basement. The perfect option for anyone who wants to open a carpentry/joinery workshop. The machines are also sold individually, but a complete purchase is possible. Help is provided with loading and loading can be done directly at the workshop using the transport ramp. You can see everything in the video, except for the extraction system in the basement. Ceb Eovvti Eo R Dy Tegt

Condition: good (used), Year of construction: 2017, *Danish one owner machine* Cuttinglenght: 3.200 mm. Ceb E R Dsvvk S Roy Tegt Motor: 7,5 hk, 400V, 50 hz. Max. Ø blade: 300/350 mm. Tiltable sawblade. 0-45 °.

Condition: new, - NEW -- Cutting plane directly on the saw blade- Large dimensioned cast iron saw unit double on the cast iron tablefastened - guarantee for stability, precision, smooth running and long service life- Precision-guided format sliding carriage made of aluminium, standardanodized- 10-year HOLZKRAFT guarantee on wear and tear on the guideways of thesliding carriage- Rip fence with round rod guide and fine adjustment as standard- Large work table made of milled gray cast iron- Quiet running and precise cuts- Enable standard table widening and table extensioneasy work with larger workpieces- Extendable aluminum telescopic fence with angle adjustment andtwo professional folding stops-Made in ItalyTECHNICAL SPECIFICATIONSDimensions and weightsWeight (net) approx. 295 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mminstallation informationTransport width 700 mmMachine body length 802 mmMachine body width/depth 615 mmSpace required length 3860 mmSpace requirement width/depth 2750 mmExplanation of space requirementsThe dimensions take into account maximum travel distances or usable lengthsWorking area length 1000 mmWorking area width/depth 2000 mmExplanation of work areaPlease add the specified dimensions to the space required to calculate theto obtain the recommended free installation space for the ctrical dataConnection voltage 400 VMains frequency 50 HzDrive motor power 4.0 kWRated operating mode drive motor S 6Duty cycle drive motor 40%Sliding carriage and tableFormat slide length 1600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 1020 mmTable width 325 mmTable height 860 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 1660 mmtrimming length 1600 mmSaw blade inclination 90 - 45°Max. cutting height 90° 100 mmMax. cutting height 45° 79 mmSaw blade diameter 315 mmSaw blade speed 4000 rpmFURNISHINGAnodized aluminum format sliding carriageHandle for sliding carriagetrimming frameSaw rip fence with round rod guideStops Two professional folding stopstrimming shoeeccentric clamptable extensiontable extensionsaw blade guard&nbsp, Cgjb E R Dysvyup Ue Tot

Condition: good (used), Year of construction: 2001, Functionality: fully functional, Used SCM SI 450 E from 2001 in good condition. The machine is CE marked. See further specifications below: Technical data: Working length 3200 mm Cgob E Rormmz Io Dy Tst Cutting width on parallel fence: 1500 mm Tilt of saw unit: 45 degrees Max. cutting height at 90 degrees with 450 mm blade: 150 mm Max. cutting height at 45 degrees with 450 mm blade: 106 mm Blade speeds: 2500/3500/5000 rpm Motor size: 7.5 HP, 5.5 kW

Condition: like new (used), Year of construction: 2013, Power of the main motor 5.5 kW Engine speed 2 870/min. Diameter of suction ports 100 + 100 mm Dimensions of the table 1 185 x 500 mm Height of the table 892 mm Spindle diameter 30 mm Saw blade tilt 0° ÷ 45° Undercutter motor power 0.5 kW Cjb E Rorft Tao Dy Tsgt Spindle diameter (undercutter) Ø 20 mm (3/4")

Condition: new, Year of construction: 2025, Functionality: fully functional, Professional machine for processing high density boards, MDF boards, ABS panels, PVC, solid wood and other materials based on wood or similar structure and hardness. In the set with a ELECTRIC clamp. Machine available on the spot. Machine features Guided on rails. Large body of the machine based on a closed-profile frame provides rigidity and perfect cutting conditions. Big 3200×420 mm sliding table makes it perfect both for professionals and novices. Technical data Saw diameter / hole diameter 350 / 30 mm Saw blade tilt range 0–45° Speed 2800 / 4000 / 4800 rpm Scoring saw diameter / hole diameter 120 / 20 mm Cjb E R Djvuf Iqjy Togt Scoring speed 7500 rpm Table dimensions 945×720 mm Sliding table 3200×420 mm Cutting width by fence 1200 mm Transverse cut by the fence for transverse cutting 3200 mm Intake connector under table diameter Ø100 mm Intake connector diameter in saw guard Ø80 mm Minimum air speed 20 m/s Minimum airflow 565 mm³/h Main motor power 5.5 kW Scoring motor power 1.1 kW Weight 850 kg

Condition: ready for operation (used), Year of construction: 2008, Panel saw K 700 S Cutting length: 2500 - 3700 mm Cutting width: 800 - 1250 mm Cutting height: 104 mm Saw blade diameter: 315 mm Saw blade swivel: 90° - 45° Motor power: 5.5 kW Speed: 4800 rpm With suction Cgsb E Revt Dyie Dy Tjt

Year of construction: 2004, Condition: like new (used), I sell the panel beam saw HOLZ-HER CUT85. Year 2004. Cutting size 3200x3200mm. Cutting height 85mm. Max saw blade diameters 350 + 180mm Main motor 11kW Scoring motor 2,2kW Cgjb E R Djppwtvoy Tst Total power 15kW Total area covered W.5636mm x D.6520mm 6 pcs. gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. Optimising software included. Label printing included. Very good condition. Available immediately.

Condition: new, - New-- Cutting plane directly on the sliding carriage- Heavy steel and cast iron construction- Precision-guided format sliding carriagemade of aluminium, anodised as standard- Large table extension on telescopic armguided and longitudinally displaceable- Extendable aluminum telescopic stop,angle-adjustable with professional stop flaps- Rip fence with quick release and fine adjustment- Large work table made of milled gray cast ironremains permanently plan- The standard table extension and table extensionextension make it easy to work with larger onesworkpieces- Quiet running and precise cuts- Equipped with a powerful three-phase motor- The large dimensioned saw aggregateGray iron is doubly fixed to the cast iron table and isa guarantee for stability, precision, smooth running andlong lifetime- Maximum cutting height is also when installedscoring device reachedMade in ItalyEquipment details:Double cradle saw unit- Oversized, made of steel/cast iron- Close to the saw blade, supported on both sidesfor precision, smooth running and a long service life- Adjustable in height and up to 45° using a crank- Maximum cutting height is also when installedscoring device reached- Also available with scoring unittelescopic stop- Extendable telescopic stop up to max. 2550 mm- Angle adjustable- With professional stop flapsAluminum sliding carriage- With a thousand times proven ball contact system- Resistant to dust and dirtminimum point of contact between ball andtrapeze rail- 10-year Holzkraft guarantee against wear and tearguidewaysRip fence with round rod guide- With fine adjustment and quick release- Stable round rod guide made of ground45mm diameter steel- Foldable as standard for cutting large onesworkpiecesTechnical specifications:Dimensions and weightsWeight approx. 385 kgDust extraction connectionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmelectrical dataDrive motor power 5.0 kWConnection voltage 400 VFormat sliding carriage and tableFormat slide length 2600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 840 mmTable width 560 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 2310 mmtrimming length 2600 mmSaw blade inclination 90 - 45 °Max. cutting height 90° 90 mmMax. cutting height 45° 63 mmDiameter (main) saw blade 315 mmSpeed ??of (main) saw blade 4000 rpmPU 1Scope of delivery:Table extension and table wideningAnodized aluminum format sliding carriageAluminum folding stopsRip fence with round rod guide andfine tuningItem No. 5504326 Csb Eovyupzo R Dy Tsgt

Year of construction: 2010, Condition: like new (used), I sell the panel beam saw SCM Sigma Prima 67. Year 2010. Cutting size 3300x3200mm. Cutting height 67mm. Max saw blade diameters 320 + 160mm Main motor 7,5kW Scoring motor 1,3kW Total power 10kW Total area covered W.5400mm x D.7000mm 8 pcs. gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. WinCut optimising software included. Label printing included. Cjbji Evbzo E R Dy Tsgt Software Ottimo Perfect Cut included. Very good condition. Available immediately.

Condition: new, Concept 350 Plus Partnership Edition- Cutting length 3200 mm -General equipment features:Saw unit can be tilted up to 46°Pressure beam, incl.:LED lighting with 3 differentaction colors:- WHITE: machine at rest- RED: pressure beam lowers oremergency stop function- BLUE: saw unit movesvariable support table 800 x 200 mmscoring system using main saw blade in synchronizationautomatic workpiece length detection forminimum travel distancesmovable and height-adjustable control panel,incl.:- Saw blade stand- Template holder- Emergency stop button, start button, selector switchGrooving/scoring, sawing/sawing, rotary switch- Feed speed- Switch for laser (optional)- USB socketPartnership Edition, incl.:- Motorized width stop with 4 aluminium stops that move synchronouslyAll 4 stops move up to 1,300 mm. The table is approx. 2,000 mm long.- Screen control (8" touchscreen). The graphical user interface offersthe following functions:- Tool database- Angle cut calculation at the cross-cut fence- Cutting plans can be created and saved- Programs can be saved, exported and imported on USB- Telescopic fence extendable to 3,400 mm incl. 2 digital displaysTechnical data:- Cutting length: 3,200 mm- Max. Saw blade projection: 100 mmat 90°, 72 mm at 45°- Saw blade: diameter 300 - 350 mm,bore 30 mm- Saw blade rotation: 4,000 rpm- Motor: 5 kW (= 7.5 HP)- Feed speed: 0 - 40 m/min.- Total length: approx. 4,270 mm- Weight: from approx. 1,150 to 1,550 kg(depending on equipment)- Required air pressure: 7 bar- Suction nozzle: 1 x 100 mm, 1 x 120 mm- Order AL202 - 38.060,00 € LVP / Partnership Edition 33.490,00 €Options:- Cutting line laser- Order no.: 36410451 - 985,00 € LVP / Partnership Edition 895,00 €- Saw motor with 7,5 kW (10 HP)- Order no.: ,00 € LVP / Partnership Edition 525,00 €available from stock immediately24 h ready for ?v=Heg6aO4rGdc Cjbsvyupno E R Dy Tsgt

Condition: excellent (used), Year of construction: 2013, I sell the format sliding table saw with scoring Manufacutrer: FELDER Model: K975 Year 2013 Cutting length 3200mm. Cutting width 1350mm Cutting height 130mm (at saw blade 400mm) Saw blade and scoring tilting 0-45° digital Saw blade and scoring height adjustment digital Parallel fence manual adjustable. Turn on the main saw blade and scoring unit from control panel Turn on the main saw blade and scoring unit from aluminium sliding table Ceb E R Dyott Nq Ds Tsgt Main motor format sliding table saw 5,5KW (7,5 HP) (3500/4500/5500 rpm adjustable) Scoring motor format sliding table saw Tools, Optionals, and equipment on photos included in price. Very good condition. Available immediately.

Condition: used, used, good condition Make Steton Type SC 400 / 3200 CE type tested Motor boosted 6.5 kW Trolley length approx. 3200 mm Cutting width approx. 1300 mm max. blade diameter 400 mm Cgob E Rovyt D Dj Dy Tjt swiveling up to 45° scoring unit parallelogram protection control panel above Rip fence with electrical adjustment Table top extension approx. 400 x 800 mm Electric height adjustment Swivel adjustment electric Digital display: - cutting angle - Rip fence - Rotational speed Extraction connection D 120 / 60 mm Space requirement approx. LxWxH mm 3400x2300x1700 Weight approx. 1000 kg Storage location 97447 Gerolzhofen Handover in the current condition as seen - free loaded -

Year of construction: 2016, Condition: excellent (used), I sell the panel beam saw HOLZMA HPP200/38/38. Year 2016. Cutting size 3800x3800mm. Cutting height 60mm. Max saw blade diameters 350 + 200mm Main motor 7,5kW Scoring motor 1,1kW Total power 12kW Total area covered W.5867mm x D.6637mm 6 pcs. gripper with pneumatic regulation Side alignment bottom pad with pneumatic stroke. Cadmatic 4 optimising software included. Label printing included. Very good condition. Available immediately. Cjb E R Dsmihrqjy Tjgt

Condition: new, A machine for beginners and professionals ic equipment:- Manual height and swivel adjustment 0 – 46°of the saw blade, with digital display- drive power 4 kW (5.5 hp) with a speed,4200 rpm.- Double trolley, trolley length 3200 mm- Miter stop, cutting to length up to 3450 mm- Braking device, illuminated button- saw blade diameter max. 315 mm,- Saw blade overhang max. 104 mm- Cutting height 100 mm, 70 mm at 45°- Machine height 88 cmPackage 5 including:- 5.5 kW (7.5 hp), 2 speeds- Rip fence DIGIT X, 1000 mm*- Large extraction hood (PSV)- Without scorer (prepared for the subsequent installation of ascoring unit) Cob E R Djvyd Duoy Togt

Condition: excellent (used), Year of construction: 2000, I sell the format sliding table saw with scoring SCM SI 300N, year 2000. Sliding table length 3200mm. Max. cutting width on cross fence 1950 / 2850mm. Max. cutting width on parallel fence 1270mm. Motor 5,5 kW. Max. saw blade diameter fi.300x30mm Max. scoring saw blade diameter fi.120x20mm Main blade (scoring blade) 4000 (8000) rpm. Cebeiu Awbo E R Dy Togt Condition very good. Avialable immediately. Please contact for more photos and details.

Condition: new, -New-CE version- The WA 6 is the smallest Altendorf sliding table saw,that exist.- Despite its smaller dimensions, it impressesgreat achievements.- With her strong equipment she trumps herselfthe smallest space.- The cut quality and flexibility are excellentin daily hnical specifications:Sliding table length 2600 mmMotor 4 kW, speed 4200 ring unit 0.37 kWCutting height max. 100 mm, at 45 ° max. 72 mmmanual height and swivel adjustment 0-45 °Cutting width 1000 mm, manually adjustableCutting to length at the crosscut-miter fenceup to 2600 mmExtraction connection top / bottom 50/100 mmWeight 550 kgWorking height 910 mm Cgjb Eovyd Dno R Dy Tjt

Condition: used, Year of construction: 2003, with electronic rip fence and large cutting width 1500 mmused, top condition, top equipmentMake SACType CS 450Year of construction 2003Machine no. LD 2206CE-type testedMotor 5.5 kWSteel guidesCar length approx. 3200 mmCutting width approx. 1550 de diameter 450 mmswiveling up to 45 °Scoring unitControl panel can be swiveled at the topRip fence with automatic controlTable top extension approx. 940 mm x 650 mmElectric height adjustmentPositioning control 3 axesDigital display:- Height- cutting angle- Rip fence- Rotation speedExtraction connection D 100 mm / 120 mmRequired space approx. 3400 mm x 3700 mm x 1800 mmWeight approx. 1500 kgTotal connected load approx. 6.25 kWStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without overhaul,without guarantee and warranty Cjb E R Dysvyd Dbj Tegt

Condition: new, The Altendorf F 25 offers everything a panel saw needs to be able to do in a small space. And all in uncompromising Altendorf quality. A machine for beginners and professionals alike. Basic equipment: - Manual height and swivel adjustment 0 - 46° of the saw blade, with digital display - Drive power 4 kW (5.5 HP) with one speed, 4200 rpm. - Double trolley, trolley length 3200 mm - Angle miter stop, cutting to length up to 3450 mm - Braking device, illuminated button - Saw blade diameter max. 315 mm, Csb E R Djvyd A Djy Tjgt - Saw blade projection max. 104 mm - Cutting height 100 mm, 70 mm at 45° - Machine height 88 cm Package 1 includes: - 5.5 kW (7.5 HP), 2 speeds - Parallel stop, 1000 mm* - Large suction hood (PSV) - Basic scoring saw with LED lighting

Condition: used, Year of construction: 2000, used, top condition, hardly used Make Altendorf Type F45 Year of manufacture 2000 Machine no. 00-02-10 CE type-tested GS wood dust tested Motor 4 kW Carriage length approx. 3000 mm Cutting width approx. 1050 mm Swivels up to 45° Parallelogram protection Table top extension Csb Eevxlq Ho R Dy Togt Anodized aluminum parts Height adjustment Swivel adjustment Extraction connection D 120/80 mm Space required approx. 3010 mm x 1800 mm x 1500 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty

Condition: used, Year of construction: 1987, used, good condition Ceb E Rovwgibe Dy Tjgt Make Ulmia Type 1728 Year of manufacture 1987 Machine no. 262 GS-tested Reinforced motor 5.0 kW Steel guides Carriage length approx. 1600 mm Cutting width approx. 950 mm Cutting length of roller table path 1900 mm Cutting height approx. 105 mm Max. blade diameter 350 mm Swivels up to 45° Parallelogram protection Weight approx. 600 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty