Used Altendorf for sale (98)

Condition: new, Year of construction: 2022, New machine Year of construction 2022 Basic equipment Electromotive height and swivel adjustment 0-46° with automatic correction of the cutting height with swivel Control at eye level, swiveling Double roller carriage, carriage length 3,000 mm Parallel fence, manually adjustable via scale, incl. manual fine adjustment, Cutting width 1,000 mm Angle fence with fixed 90° position, manually adjustable via scale up to 3,200 mm Saw blade projection max. 150 mm max. saw blade Ø 450 mm Drive power 4 kW (5.5 HP) with 4000 rpm AKE tool clamping system for the main saw blade Working height 91 cm Motor 5.5 kW (7.5 hp) with VARIO F45 - Infinitely variable speed control from 2000 - 6000 rpm - Precise speed adjustment to the material material increases the cutting quality and service life of the saw blades Extended cutting height for one-sided tilting This option is available for one-sided tilting with a large extraction hood for a max. saw blade Ø of 550 mm and a saw blade projection of max. saw blade projection of max. 204 mm. In combination with a scoring unit saw blade Ø is 500 mm or 179 mm cutting height. cutting height. Only in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis scoring unit one. Tilt With electromotive height and side lateral adjustment, scoring blade height programmable with quick lowering and quick raising , Drive motor 0.75 kW (1 hp), 8200 rpm. Retrofitting only possible on machines with preparation for scoring unit possible. LED lighting With particularly energy-efficient LED technology the danger zone of the scoring unit is clearly marked. The Altendorf double roller carriage is famous for its smooth and precise running. It can be locked in any position. The large double castors, precision-machined from hardened hardened steel, hold the upper carriage in in conjunction with the undercarriage with absolute respective hard chrome-plated guide rods. This running quality is maintained even decades of load and soiling. and dirt. The trolley design is extremely torsion-resistant and Gslsmrxznjhcdw Ijbl multi-hollow chamber system. The table surface is precisely planed and anodized. A mounting for the cross slide and an interface and as an interface for various accessories is a hard chrome-plated round rod, which is positively into the upper carriage. The entire unit is low-maintenance and does not require lubrication. On/off switch on the double roller unit The on/off switch on the double roller carriage is always at hand. The four buttons are used to both the main saw blade and the scoring blade are switched on and off. This saves walking and ensures greater safety Angle mitre fence, cutting to length up to 3500 mm This stop patented by ALTENDORF with integrated length integrated length compensation facilitates the precise cutting of angles and miters in one function. one function. In both positions, the angle can be continuously adjusted by 49° and is is indicated by a measuring scale. backlash-free and robust stop flaps can be easily moved and adjusted as a single flap over the entire the entire range up to max. 3500 mm.

Condition: used, Year of construction: 1987, total length: 1,850 mm, total width: 3,260 mm, total height: 1,550 mm, Weight: 950 kg - Table width [mm]: 1220 - Dust extraction port diameter [mm]: 110 - Roll table length [mm]: 3220 - Motor power of saw blade [kW]: 4.0 - Max. saw blade diameter [mm]: 350 - Scoring blade: 1 - Year: 1987 - Documentation available: No Gelhcdwjwiwyts Isbl - Serial number: 87-1-131 - Transport dimensions: 1850mm x 3260mm x 1550mm (l x w x h) - Transport weight [kg]: 950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: ready for operation (used), Altendorf F45 Sliding Table Saw Carriage length 3200mm Cutting width on the right side: 1350mm Maximum saw size 350mm Hydraulic angle adjustment 0-45 Hydraulic lifting and lowering of the saw Electrical adjustment of the scoring unit Variable speed on belts: 3000/4000/5000/6000r.p.m Main motor with a power of 5.5kw Scoring unit motor with a power of 0.75kw CE certificate Gbolhcdwswh T Dfo Isl

Condition: new, ALTENDORF WA 6 sliding table saw - Exhibition machine - manual height adjustment, double roller carriage, scoring unit, pivoting, outrigger table, angle mitre fence, automatic brake, can be lowered below table height ----- Technical data ----- Swivel range: 0 - 45 °, Cutting length: 2,500 mm, Cutting width at rip fence: 1,000 mm, max. cutting height: 100 mm, max. saw blade Ø: 315 mm, Swivel range mitre fence: up to 49 °, speeds: 4,200 rpm Motor power main motor: 5.5 hp / 4.0 kW, Scoring motor power: 0.5 hp / 0.37 kW, Work table height: 910 mm, Extraction nozzle Ø: 1 x 100 / 50 mm each, Golhcdou R Sx Ejw Iebl Weight: 450 kg - new exhibition machine -

Condition: excellent (used), Year of construction: 1986, Used, good condition Make: Altendorf Type F45 Year of manufacture: 1986 Machine No. 86-4-143 GS-tested Motor: 5.5 kW Carriage length: approx. 2500 mm Cutting width: approx. 800 mm Pivotable up to 45° Saw blade diameter: 450 mm Golhjwhgd Sjcdw Isbl Parallelogram guard Miter stop Extraction connection: D 80 and 120 mm Space required: approx. 2500 mm x 1600 mm x 1500 mm Weight: approx. 1000 kg Storage location: 54634 Bitburg, Germany, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: excellent (used), Year of construction: 1994, sliding table length 3200mm scoring unit Gbslhcdelwvffew Iol hydraulic regulation of blade angle hydraulic regulation of blade up/down digital display of blade angle electric regulation of scorer carriage moved on textolithe rails

Condition: used, Saw blade diameter 400 mm Cutting height 130 mm cutting width 700 mm Speed 5000 U/min. sawing motor 5,5 kW weight of the machine ca. 0,85 t dimensions 3,0 x 1,5 x 1,2 m Gbsljwinyqohcdw Iel Sliding table saw - 10,000 mm parallel stop - Table length 30,000 x 1,500 - See pictures for additional accessories

Condition: new, - 5.5 kW (7.5 HP), 3 speeds - Motorized height and tilt adjustment - Large protective hood - Double sliding table 3,200 mm - Scoring unit with LED lighting - CNC parallel stop, cutting width 1,000 mm Gbslswh Unfohcdw Iol - Angle miter stop 3,450 mm, without length compensation - Table top extension/widening: Proven CDF surface Further options available upon request!

Condition: good (used), Year of construction: 2019, cutting width at rip fence: 1,600 mm, power: 5 kW (6.80 HP), Equipment: motor brake, Year of manufacture 2019 -F45 ProDrive -Machine height 910 mm -Operating at eye level Gjlhcowhx Ucodw Iebl -Two-sided tilting (+/- 46*) -Max. blade diameter 450 mm -Motor 5.0 kW (6.8 HP) VARIO -Double-sliding table with a carriage length of 3200 mm -Table top extension 840 mm -Angle stop 3200 mm PAK -CNC parallel stop 1600 mm -Front support roller -Delivery and packaging Current list price approximately €42,000.

Condition: new, The ALTENDORF F 25 offers everything in a small space, what a sliding table saw must be able to do. Whether in the first own workshop, for daily use, in industrial production industrial production or as a powerful second machine. - The F 25 is the space-saving all-rounder that simply makes you simply makes you more productive. Materials such as wood panel materials, solid wood, wood-like materials or extruded or extruded profiles can be cut with the best precision, easy handling and outstanding cutting quality can be easily processed. The one-sided swivel saw blade also enables angled cuts. The smooth-running double roller carriage based on the Altendorf as well as the digital display of the height and tilt are standard features. A machine for beginners and professionals alike. Double roller carriage, Gbelju R S Hcjhcdw Iol tiltable, man. Height and swivel adjustment, Rip fence with man. Fine adjustment, angle mitre fence, Preparation for retrofitting, of a scoring unit ----- Technical data ----- Swivel range: 0 - 46 °, carriage length: 3,200 mm, Cutting width: 1,000 mm, Cutting height: 100 mm, max. saw blade Ø: 315 mm, max. saw blade projection: 104 mm, Non CE version: max. saw blade Ø: 350 mm, max. saw blade projection: 121.5 mm, Crosscut fence extendable up to: 3,450 mm, speeds: 4,200 rpm, Motor power: 4.4 kW, 5.5 HP, work table height: 880 mm - large extraction hood is optional - - new exhibition machine -

Condition: good (used), Year of construction: 1979, Sawblade tiltable nein ° Length of the rolling table 2800 mm cutting width 1250 mm Gjlhcdwjwgi Ans Isbl Motor output 5,5 kW Cutting height 125 mm Saw blade diameter 400 mm

Condition: excellent (used), CATALOG NUMBER 7644 Technical data: - max. diameter of the main blade with a scorer 350mm - max. diameter of the main blade without a scorer 450mm - cutting height with a 100mm blade installed Gbslhcowgdh Sedw Ijl - hydraulically adjustable main blade up/down + angle - electric angle display - electric adjustment of the scorer up/down, right/left - spindle diameter 30mm - spindle locking - with a format carriage - cutting length on the carriage 2800mm - cutting width at the guide 1440mm - with a side carriage - with a scorer - max. diameter of the scorer 120mm - spindle diameter 22mm - scoring motor 0.75kW - main motor 5.5kW - 4 types of rotation speeds - electronic rotation display - diameter extraction nozzle 120mm, 80mm - table top dimensions 1220x730mm - table top dimensions with extension 1230mm - table top dimensions with extension 2070mm - blade guard - dimensions length/width/height 2940x3400x1420mm - weight 1100kg ADVANTAGES – German production – with scoring saw – unpainted – used saw, very good condition Net price: PLN 29900 Net price: EUR 7030 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of greater exchange rate fluctuations the price may change)

Condition: excellent (used), Year of construction: 2003, 3200mm Sliding Table 1350mm Rip Capacity Gbelhcdwjwga I Ue Isl Scoring Blade Electronic Rise, fall and tilt 5.5hp main saw motor

Condition: new, - 7.5 kW (10 HP), 3 speeds - Motorized height and tilt adjustment - Large protective hood - Double sliding table 3,200 mm - Scoring tool preparation - Parallel stop, cutting width 1,000 mm - Miter stop 3,450 mm, without length compensation Gjlowh Um Uehcdw Iebl - Table top extension/widening: Powder-coated surface Further options available upon request!

Condition: good (used), Year of construction: 1992, Altendorf F 45 sliding table saw, built in 1992 Motor: 5.5 kW / 400 volts Cutting length: 2800 mm Cutting width: 1000 mm Pivoting up to 45° Speeds: 3, 4, 5, and 6000 rpm Max. saw blade diameter: 450 mm Max. cutting height: 155 mm Parallel guard Gslhcjwhpngjdw Isbl Fine adjustment on the parallel stop Miter stop 800 mm aluminum table extension

Condition: new, ALTENDORF F 25 sliding table saw, type 1 -Exhibition machine- Double roller carriage swiveling man. Height and swivel adjustment Rip fence with man. fine adjustment Angular mitre fence Large extraction hood Basic scoring unit with LED lighting ----- Technical data ----- Swivel range: 0 - 46 ° Carriage length: 3,200 mm Rip fence: 1,000 mm Cutting height: 100 mm Gelhcdsu R S Dbsw Iebl Max. saw blade Ø: 315 mm Crosscut fence extendable up to: 3,450 mm Speeds: 3,600 / 4,200 rpm Motor power: 5.5 kW (7.5 hp) Work table height: 880 mm Suction nozzle Ø: 120 + 80 mm - new exhibition machine -

Condition: excellent (used), Year of construction: 2003, Pressure beam for clamping workpieces up to approx. 80 mm thick. Particularly interesting for miter cuts and veneer trimming. For a secure hold of the workpiece on the sliding carriage. Gjlhceu Ivynedw Isbl For 300cm long sliding table or longer. Maximum clamping length approx. 290cm The pressure beam can be mounted on the newer machines with steel guides, but also on machines with Pertinax guides. The pressure beam is divided into two parts and can be controlled separately. The saw in the photos is of course not for sale. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this vendor".

Condition: excellent (used), Catalogue No. 7638 TECHNICAL DATA Gbelhcdwjwff Rfj Iol max. diameter of the main blade with the scoring unit 350mm max. diameter of the main blade without the scoring unit 450mm max. cutting height for the 350mm blade 100mm main blade electrically adjustable from the control panel up/down + angle electric adjustment of the scoring unit up/down spindle diameter 30mm spindle locking with format carriage cutting length on the carriage 3200mm electronic cutting width reader on the auxiliary table guide electrically adjustable from the control panel cutting width at the guide 1300mm with side carriage with scoring unit max. diameter of the scoring unit 120mm spindle diameter 22mm scoring unit motor 0.75kW main motor 5.5kW 4 types of rotation speeds 3000, 4000, 5000, 6000 rpm extraction nozzle diameter 120mm, 80mm tabletop dimensions 1230x700mm tabletop dimensions with extension 1650mm tabletop dimensions with extension 2180mm disc guard electric brake dimensions L/W/H 3210x3600x1800mm weight 1100kg ADVANTAGES – German production – electronic cutting width reader on the auxiliary table – main blade, scoring blade, guide electrically adjustable – original documentation – unpainted – used saw, perfect condition Net price: PLN 45900 Net price: EUR 10800 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Year of construction: 1999, 3200mm Sliding Table 1350mm Rip Capacity Scoring Blade Electronic Rise, fall and tilt Gbjlowga E Hshcdw Isl 5.5hp main saw motor

Condition: new, - 5.5 kW (7.5 HP), 3 speeds - Motorized height and tilt adjustment - Large protective hood - Double sliding table, 3,200 mm - Scoring unit with LED lighting - DIGIT X parallel stop, cutting width 1,000 mm Gjljwh Um Ishcdw Ijbl - 3,450 mm angle miter stop, without length compensation - Table top extension/widening: Powder-coated surface Further options available upon request!

Condition: new, Altendorf F25 demonstration/exhibition machine at a special price of €11,900 net. BASIC EQUIPMENT: • Manual height and tilt adjustment 0–46° of the saw blade, with digital display • Double sliding table, carriage length 3,200 mm • Crosscut miter stop, cutting to lengths up to 3,450 mm Gbslhcjwf Iutodw Iol • Saw blade diameter max. 315 mm, saw blade projection max. 104 mm • Cutting height 100 mm, 70 mm at 45° • Machine height 880 mm OPTIONAL EQUIPMENT: ▶ 5.5 kW (7.5 HP), 2 speeds ▶ DIGIT X parallel stop, 1,000 mm* ▶ Large extraction hood (PSV) ▶ Scoring unit with LED lighting ▶ Front support roller F25 ▶ Template holder F25 You will receive an invoice with VAT. Shipping via freight forwarder is possible. Price is ex warehouse Haldensleben.

Condition: new, ALTENDORF F 45 EvoDrive sliding table saw with 7" touchscreen - Exhibition machine - Including: - ALTENDORF F 45 EvoDrive sliding table saw with 7" touch screen Includes: - DIGIT L angle mitre fence, ALTENDORF Cutting to length up to 3,200 mm Includes: - CNC parallel fence, 1,300 mm, ALTENDORF Traversing speed 250 mm/sec. with dimensional correction for tilted fence profile and with tilted saw blade Including: - ALTENDORF template holder Included: - Extended cutting height, 1-sided tilting ALTENDORF Gslheu R S Aqocdw Isbl Saw blade projection max. 204 mm In combination with a scoring unit the max. saw blade Ø is 500 mm, or 179 mm cutting height. Includes: - 5.5 kW (7.5 HP) motor with VARIO ALTENDORF 2,000 - 6,000 rpm Includes: - Scoring unit 2-axle, 1-sided, ALTENDORF with motorized height and side adjustment Programmable scoring blade height with quick lowering and quick raising, Drive motor 0.75 kW (1 hp), 8,200 rpm. Including: - LED lighting on ALTENDORF scoring unit Including: - Double roller carriage 3,200 mm, ALTENDORF Including: - Front support roller ALTENDORF Width 300 mm - new exhibition machine -

Condition: used, Year of construction: 2000, With electric height and tilt adjustment Used, excellent condition, little used Make Altendorf Type F45 Year of manufacture 2000 Machine number GS-tested Motor 4 kW Steel guides Carriage length approx. 3000 mm Cutting width approx. 1050 mm Pivoting up to 45° Prepared for scoring unit Parallelogram guard Tabletop extension Anodized aluminum parts Electric height adjustment Gbolhcdwsvxlq Hj Ijl Electric tilt adjustment Digital display: - Cutting angle - Speed Extraction connection D 120/80 mm Space required approx. 3010 mm x 1800 mm x 1500 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: new, ALTENDORF HAND GUARD sliding table saw Edition TwinFlex with 12" touchscreen -exhibition machine- Including: - ALTENDORF HAND GUARD sliding table saw Edition TwinFlex with 12" touchscreen Optical protection system: Two cameras collect data for hand detection from a wide area around the saw blade. As soon as hands are detected entering the area a quarter of a second, the saw unit is quickly lowered and quick stop of the saw unit within a quarter of a second. EDITION TWINFLEX - Double roller carriage 3,000 mm - Saw blade projection 150 mm - Motor power VARIO 5 kW (6.8 HP) - Tilting on both sides - DIGIT LD angle mitre fence, cutting to length up to 3,200 mm - CNC rip fence, cutting width 1,000 mm - On/off switch on the double roller carriage - Template holder Golhcou R S Elodw Iobl Included: - Surcharge for motor power 6.5 kW (8.8 hp) ALTENDORF with VARIO, for tilting on both sides Included: - Scoring unit 2-axle, 2-sided, ALTENDORF with motorized height and side adjustment Scoring blade height programmable with quick lowering and quick raising, Drive motor 0.75 kW (1 hp), 8,200 rpm. Including: - RAPIDO 180 mm ALTENDORF scoring system for tilting on both sides Includes: - LED lighting on ALTENDORF scoring unit Included: - Double roller carriage 3,400 mm, ALTENDORF Including: - CNC parallel fence, 1,300 mm, ALTENDORF Included: - Camera arm, swiveling ALTENDORF Includes: - Front support roller ALTENDORF Width 300 mm Includes: - ALTENDORF air cushion table Includes: - Table top extension 840 mm ALTENDORF with air cushion - new exhibition machine -

Condition: used, Year of construction: 1980, Partially overhauled, fully adjusted With completely new control/circuit board Main switch Brake device with automatic star-delta start Emergency stop button Used, good condition Brand Altendorf Gbslsv Tqrfshcdw Isl Type F45 Year of manufacture 1980 Machine no. 80-8-35 GS-tested Motor 5.5 kW Carriage length approx. 2800 mm Cutting width approx. 1200 mm Pivotable up to 45° Parallelogram guard Single miter stop Extraction connection D 80 and 120 mm Space required approx. 2800 mm x 1600 mm x 1500 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on load, unpacked Handed over in as-is condition, as seen, without guarantee or warranty