Panel sizing circular saws

WINTER M45-3200 DELUXE

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 18,5 kW ✔ Shaft length: 550 mm ✔ Shaft diameter: 260 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 14 ✔ Granulation: 10-30 mm ✔ Capacity: up to 4 m3/h* ✔ Material discharge opening: 160 mm ✔ Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) ✔ Filling opening: 939 x 567 mm ✔ Dimensions L/W/H: 1,88/1,12/1,67 m Duedpfx Aisiq U A Sjwot ✔ Weight: 1250 kg 2 years warranty or 2000 working hours

Condition: good (used), Year of construction: 2021, machine/vehicle number: 2021 102 14, Offer 25300 Technical specifications: - Manual band saw - Saw band dimensions: 2750 x 27.0 x 0.9 mm - Infinitely variable cutting speeds: N 15 / 90 m/min - Max. clamping capacity: 355 mm - Mitre adjustable left and right up to 30° - Cutting range: Dedpfxoxup Ttj Aiweut - 90°: - round: 255 mm - square: 190 mm - flat: 310 x 190 mm - 45° left & right: round 215 mm - Drive: 400 V / 1.5 kW - Coolant system - Weight: approx. 350 kg - Space requirement: approx. W 700 x H 1600 x D 1700 mm

Year of construction: 1995, condition: good (used), Kuper veneer zig-zag splicer machine, type FW/ 1200-E year of manufacture 1995 S/N 3508 3179 Specific features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely variable width of zig-zag pattern glue thread cutting device max. veneer thickness : 3,0 mm Djdpfx Ajhbp Ifjiwsut min. veneer thickness : 0,3 mm glue thread with hot air heating Compressed air discus for transporting the veneer over the veneer table control via foot pedal feed speed : 35-60m / min Volt: 400 V, 50 Hz Total power 1,35 kW working height 915mm weight approx. : 440 kg Dimension : 2,12m x 0,73m x 1,55m

Condition: new, Year of construction: 2026, VERSION with the most powerful engine with a total power of S6: 2.6kW. A more powerful engine means stable operation and easy processing of hard materials: Hardwood requires more force for processing. A powerful engine will handle this without a problem. The latest version of the machine with an innovative tabletop opening system: Competitive old-type machines have "butterfly" tabletops. Before each start of work, the feed table and the receiving table should be calibrated with each other. Even small differences between them lead to damage in the material, giving undesirable effects. The new solution of connected tabletops allows for precise adjustment of both tables at the same time! Thanks to this, once set, the tables are permanently calibrated. When changing the planing height, both tables move simultaneously. Such a solution not only saves time, makes work with the machine more convenient, but also increases the precision of planing by 30% compared to the old solution. This is very important, especially when working with thinner materials. Trouble-free change from a planer to a thicknesser. The transition from planer to thicknesser is very quick and easy. It consists of unlocking the eccentrics and lifting the tables and moving the chip extraction cover. Dodpfxsvxh A Se Aiwsut Work precision. Smooth height adjustment of the tops with a scale. The thicknesser table mounted centrally on the column has a knob for adjusting the setting up and down Aluminum swinging ruler (700x150 mm) with a scale strip allowing for precise setting at an angle in the range of 90-45 degrees. Technical parameters Knife shaft diameter 75 mm Knife shaft speed 4000 rpm Suction nozzle diameter 100 mm Swing ruler tilt angle 90–45° Number of knives 3 Shaft length 250 mm Knife dimensions 250x30x3 mm Maximum planer width 250 mm Maximum thicknesser width 250 mm Maximum planing height 180 mm Maximum thicknesser cutting depth 3 mm Maximum planer cutting depth 2.5 mm Thicknesser feed speed 6 m/min Fence size 700 x 150 mm Machine dimensions (length x width) 1080 x 269 mm Weight 175 kg Total engine power S1: 2.2 kW S6: 2.6 kW Power supply 400V

Condition: used, Year of construction: 1970, Year of manufacture: 1970 Duodpfx Aiswx Rrnswst Total pressing force at 320 atü: 80 tons Pressing cylinder: 6 pistons Motor power: 1.1 kW Heating-up time approx. 20 min. Price ex works.

Condition: new, pressure: 60stroke: 250total power requirements: 4weight approx.: 800messurements (LxWxH): 1.710 x 700 x 2.100Technical DataPress force: 60 tons Motor power: 4 kW Duedsd Ab Iqjpfx Aiwjt Stroke: 250 mm Clear distance between columns: 1,040 mm Piston Ø: 180 x 120 mm Feed speed: 8 mm/s Working speed: 4 mm/s Return speed: 10 mm/s Length: 1,710 mm Width: 700 mm Height: 2,100 mm Weight: 800 kg EquipmentSteel welded construction Any stop position Pressure gauge Safety valve against overload 2 V-prisms Height-adjustable table Table up/down device Control with operating lever Manual right/left cylinder movement Equipment according to CE regulations, operating manual in German and English

Condition: new, Year of construction: 2026, functionality: fully functional, Professional machine for processing high density boards, MDF boards, ABS panels, PVC, solid wood and other materials based on wood or similar structure and hardness. In the set with a ELECTRIC clamp. Machine available on the spot. Machine features Guided on rails. Large body of the machine based on a closed-profile frame provides rigidity and perfect cutting conditions. Big 3200×420 mm sliding table makes it perfect both for professionals and novices. Technical data Saw diameter / hole diameter 350 / 30 mm Saw blade tilt range 0–45° Speed 2800 / 4000 / 4800 rpm Scoring saw diameter / hole diameter 120 / 20 mm Scoring speed 7500 rpm Table dimensions 945×720 mm Sliding table 3200×420 mm Cutting width by fence 1200 mm Transverse cut by the fence for transverse cutting 3200 mm Intake connector under table diameter Ø100 mm Intake connector diameter in saw guard Ø80 mm Minimum air speed 20 m/s Minimum airflow 565 mm³/h Duodpfxevuf Iqs Aiwot Main motor power 5.5 kW Scoring motor power 1.1 kW Weight 850 kg

Condition: used, Veneer Press OTT JU 90 -used- ----- Technical Specifications ----- Pressing area: 2,550 x 1,350 mm, Power per heating plate: 9100 W, Dodewmmraopfx Aiweut Number of cylinders: 4

Condition: good (used), Code: 0599 Brand: KUPER Model: FW 1200 Thread splicer for veneer Reach mm 1200 Veneer thickness from 0,3 mm to 3 mm Feed speed from 10 to 50 mt/min Worktop height mm 925 Electrical connection 1,5 Kw Overall dimensions: mm 2150 x 750 x 1650 h Dujdpfx Aijyg N Dwewot Weight kg 425

Condition: good (used), Year of construction: 1993, functionality: fully functional, Table router TF900 - Year of manufacture: 1993 - 380 Volt - 3-speed control Duedpfx Aieygm D Uewot Transport available at extra cost!