Used sliding table saws 2801-3300mm cutting length for sale (231)

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees Fjdsw D T Dkopfx Ac Nofu T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: GM010.0396, cutting length (max.): 3,200 mm, cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, table length: 840 mm, power: 5.5 kW (7.48 HP), Factory-refurbished Altendorf F45 with ProDrive control system! TECHNICAL DETAILS Cutting Data Cutting length: max. 3,200 mm Cutting width at rip fence: 1,300 mm Saw blade diameter: 550 mm Saw blade projection at 90°: 204 mm Saw blade projection at +45°: 141 mm Carriage length, double roller carriage: 3,200 mm Table Data Table length: 840 mm Performance Data Power output: 5.5 kW MACHINE DETAILS Machine height: 910 mm Fjdpfxjxc Uq Hs Ac Njfu Motor power: 5.5 kW (7.5 HP) Dust Extraction Connection Extraction, top: Ø = 80 mm Extraction, bottom: Ø = 120 mm Negative pressure: 1,200 Pa at total suction port, Ø = 140 mm Air consumption: v_min = 1,110 m³/h at 20 m/s Air Cushion Table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Lighting Continuously variable speed control Scorer unit LED lighting 3-axis scorer including park position On/off switch on the double roller carriage Angle/miter fence Parallel stop DIGIT X 1,300 mm Front support roller Second support on the double roller carriage

Condition: excellent (used), Felder kappa 550 panel saw, format 4 Sliding table 320 cm, Ffjdpfx Acox Swzvo Neu Blade tilt and height adjustment motorized, Right-hand fence motorized adjustable up to 1600 mm, Main motor 7.35 kW, Max blade diameter 500 mm Used machine, in very good condition.

Condition: good (used), Year of construction: 1993, operating hours: 7,120 h, functionality: fully functional, cutting length (max.): 4,500 mm, cutting width (max.): 4,500 mm, cutting width at rip fence: 3,200 mm, cutting height (max.): 100 mm, cutting height with scoring (max.): 100 mm, saw blade diameter: 400 mm, main saw diameter: 400 mm, overall weight: 3,000 kg, Equipment: scorer, A well-preserved machine with few working hours. It has been operated by a private customer since new. Ffodevvhfhspfx Ac Nsu

Condition: used, functionality: fully functional, cutting length (max.): 2,800 mm, SECOND-HAND CIRCULAR SAW ROBLAND MOD. E3100 Fsdpjx Rvkmjfx Ac Njfu

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: AB/203002, cutting length (max.): 3,200 mm, SECOND-HAND CIRCULAR SAW SCM MOD. SI450 EP CLASS - Carriage mm. 3200 Fedpfxjx Runqj Ac Nofu - Motor Hp 10 - Inverter for speeds change - Motirzed scoring unit adjustement - Serial number AB/203002 - Year 2010 (CE)

Condition: used, Good day! 1 used Altendorf F 45 sliding table saw - Hydraulic height and tilt adjustment - Digital display (speed and tilt) - 4.5 m trimming length - Automatic star-delta start - 105 mm cutting height with 350 mm saw blade with scorer - 155 mm cutting height with 450 mm saw blade without scorer - 3000/4000/5000/6000 rpm - Automatic motor brake - Rip fence with fine adjustment - Parallelogram guard - Table extension and table width extension - Chassis - Extraction ports top and bottom - Trimming shoe - Adjustable handle on the sliding carriage - Operating tools - Operating manual/spare parts list New parts: - Narrow extraction hood 90° 181.00 + 19% - Wide extraction hood 45° 268.80 + 19% - Poly Flex V-belt 11W875 35.50 + 19% - Flat belt for scorer 32.50 + 19% - Gas pressure spring 50N for scorer 45.30 + 19% - GUHDO saw blade 350 mm 78.50 + 19% - Saw spindle new bearings fitted 250.00 + 19% - Scorer new bearings fitted 150.00 + 19% Special equipment: - 7.5 kW 380 Volt motor New price: €1,350 + 19% - Scorer New price: €3,150 + 19% - 4.3 m sliding carriage New price: €4,250 + 19% - Pneumatic pressure beam 3.2 m New price: €3,800 + 19% - Rip fence with fine adjustment 1.3 m New price: €580 + 19% Ffodjx Rt E Uopfx Ac Nsu - Duplex double-sided mitre fence New price: €1,350 + 19% - LASER cut line indicator New price: €2,300 + 19% - Circular saw feed Panhans Type 76 New price: €4,665 + 19% Price: €13,800 + 19% VAT The machine has been technically inspected, cleaned, adjusted, and newly painted. Cables and plug included – ready for immediate use. Payment by cash or bank transfer prior to collection/shipping only. The machine is sold without any warranty or guarantee. Please send me a brief message. Thank you!

Condition: new, Year of construction: 2005, Carriage length: 1500 mm Cutting width at rip fence: 700 mm Cutting width at crosscut fence: 2200 mm Cutting depth: 100 mm Scoring unit: no Ffedexrbh Rjpfx Ac Nou Saw blade height adjustment: manual / hand crank Saw blade tilt adjustment: manual / hand crank Rip fence adjustment: manual Saw blade angle display: digital Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 315 mm Speeds: 1 Motor power: 4 kW Motor brake: yes - automatic Extraction connection: 80 mm and 120 mm Machine length: 3000 mm Machine width: 1700 mm Weight: 900 kg

Condition: used, Year of construction: 2007, Carriage length: 3000 mm Cutting width at rip fence: 1250 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scoring unit: no Saw blade height adjustment: electric Saw blade tilting adjustment: electric Rip fence adjustment: handwheel Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut fence display: scale Saw blade diameter: 400 mm Speeds: 2800 / 4000 / 5500 rpm Motor power: 7.5 kW Extraction connection: 80 and 120 mm Machine length: 3500 mm Machine width: 1900 mm Weight: 1200 kg Ffjdpfx Aox I Ah Tec Nju

Condition: new, The ALTENDORF F 25 offers everything in a small space, what a sliding table saw must be able to do. Whether in the first own workshop, for daily use, in industrial production industrial production or as a powerful second machine. - The F 25 is the space-saving all-rounder that simply makes you simply makes you more productive. Materials such as wood panel materials, solid wood, wood-like materials or extruded or extruded profiles can be cut with the best precision, easy handling and outstanding cutting quality can be easily processed. The one-sided swivel saw blade also enables angled cuts. The smooth-running double roller carriage based on the Altendorf as well as the digital display of the height and tilt are standard features. A machine for beginners and professionals alike. Double roller carriage, tiltable, man. Height and swivel adjustment, Rip fence with man. Fine adjustment, angle mitre fence, Preparation for retrofitting, of a scoring unit ----- Technical data ----- Swivel range: 0 - 46 °, carriage length: 3,200 mm, Cutting width: 1,000 mm, Cutting height: 100 mm, max. saw blade Ø: 315 mm, max. saw blade projection: 104 mm, Ffsdpfx Aeu R S Hcsc Nju Non CE version: max. saw blade Ø: 350 mm, max. saw blade projection: 121.5 mm, Crosscut fence extendable up to: 3,450 mm, speeds: 4,200 rpm, Motor power: 4.4 kW, 5.5 HP, work table height: 880 mm - large extraction hood is optional - - new exhibition machine -

Condition: new, ALTENDORF HAND GUARD sliding table saw Edition TwinFlex with 12" touchscreen -exhibition machine- Including: - ALTENDORF HAND GUARD sliding table saw Edition TwinFlex with 12" touchscreen Optical protection system: Two cameras collect data for hand detection from a wide area around the saw blade. As soon as hands are detected entering the area a quarter of a second, the saw unit is quickly lowered and quick stop of the saw unit within a quarter of a second. EDITION TWINFLEX - Double roller carriage 3,000 mm - Saw blade projection 150 mm - Motor power VARIO 5 kW (6.8 HP) - Tilting on both sides - DIGIT LD angle mitre fence, cutting to length up to 3,200 mm - CNC rip fence, cutting width 1,000 mm - On/off switch on the double roller carriage - Template holder Included: - Surcharge for motor power 6.5 kW (8.8 hp) ALTENDORF with VARIO, for tilting on both sides Included: - Scoring unit 2-axle, 2-sided, ALTENDORF with motorized height and side adjustment Scoring blade height programmable with quick lowering and quick raising, Drive motor 0.75 kW (1 hp), 8,200 rpm. Including: - RAPIDO 180 mm ALTENDORF scoring system for tilting on both sides Includes: - LED lighting on ALTENDORF scoring unit Included: - Double roller carriage 3,400 mm, ALTENDORF Including: - CNC parallel fence, 1,300 mm, ALTENDORF Included: - Camera arm, swiveling ALTENDORF Includes: - Front support roller ALTENDORF Width 300 mm Includes: - ALTENDORF air cushion table Fjdpfou R S Elox Ac Njfu Includes: - Table top extension 840 mm ALTENDORF with air cushion - new exhibition machine -

Condition: new, Panel Saw ALTENDORF F 35 Type 3 - 1000 -Exhibition Machine- 5.5 kW (7.5 HP), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC rip fence, cutting width 1,000 mm, Angle-mitre fence 3,450 mm, without length compensation, Table extension/table widening, Ffsdsw Imptepfx Ac Nsu High-quality CDF surface ----- Technical Specifications ----- Tilting range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 5.5 kW, Screen size: 15 inch, Table height: 910 mm, Extraction port Ø: 80 + 120 mm - New exhibition machine -

Condition: new, ALTENDORF WA 6 sliding table saw - Exhibition machine - manual height adjustment, double roller carriage, scoring unit, pivoting, outrigger table, angle mitre fence, automatic brake, can be lowered below table height ----- Technical data ----- Swivel range: 0 - 45 °, Cutting length: 2,500 mm, Cutting width at rip fence: 1,000 mm, max. cutting height: 100 mm, Ffedpfxju R Sx Ej Ac Nou max. saw blade Ø: 315 mm, Swivel range mitre fence: up to 49 °, speeds: 4,200 rpm Motor power main motor: 5.5 hp / 4.0 kW, Scoring motor power: 0.5 hp / 0.37 kW, Work table height: 910 mm, Extraction nozzle Ø: 1 x 100 / 50 mm each, Weight: 450 kg - new exhibition machine -

Condition: new, HOLZKRAFT sc 2c sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Fsdpsu R Sy Nefx Ac Nsfu Speeds: 4,000 rpm, max. saw blade Ø: 315 mm, Cutting width with rip fence: 900 mm, Cutting height 90/45°: 100 / 79 mm, cutting length: 1,600 mm, Swivel range: 90 - 45 °, Dimensions (LxW): 1,020 x 325 mm, Weight: 295 kg - new exhibition machine -

Condition: new, Panel saw ALTENDORF F 35 Type 3 - 1000 5.5 kW (7.5 hp), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC parallel fence, cutting width 1,000 mm, Fsdpfx Acjwnr Ehe Nofu Angle-mitre stop 3,450 mm, without length compensation, Table extension/table widening:, With high-quality CDF surface ----- Technical data ----- Swivel range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, max. saw blade Ø: 450 mm, Motor power: 7.5 kW, Screen size: 15 inches, Working table height: 910 mm, Suction connection Ø: 80 + 120 mm

Condition: new, Holzkraft L invincibile si 3 BLADE OFF sliding table saw BLADE OFF safety system - exhibition machine- ----- Technical specifications ----- Fsdpfx Acov Nhg Ss Njfu Supply voltage: 400 V, Mains frequency: 50 Hz, Scoring motor power: 1.3 kW, Drive motor power: 9.0 kW, Format sliding table length: 3200 mm, Format sliding table width: 360 mm, Table length: 1040 mm, Table width: 630 mm, Cutting width with parallel stop: 1500 mm, Max. cutting width to the left of the sawblade: 3200 mm, Trimming length: 3200 mm, Sawblade inclination: 90 - 45°, Max. cutting height 90° with 400 mm sawblade: 120 mm, Max. cutting height 45° With 400 mm saw blade: 89 mm, Saw blade speed: 3000 - 5000 rpm, Scoring saw blade diameter: 120 mm, Scoring saw blade speed: 8500 rpm, Length approx.: 7250 mm, Width/Depth approx.: 4460 mm, Height approx.: 1770 mm, Net weight approx.: 1307 kg, Extraction nozzle diameter: 100 and 120 mm The BLADE OFF system detects potential hazardous situations early and prevents them by retracting the saw blade into the machine table in a fraction of a second. With the help of sensors, the system is able to distinguish between the workpiece and the operator. An LED light in the saw blade guard indicates with a green light whether the safety system is active. Controlled via the 15" eye-S control console. Connection to the SCM Thundercut (optimizer/sequence control app) is possible. Three longitudinal stops with integrated digital displays. Electrically adjustable parallel stop. Start/stop buttons for the main and scoring saw blades integrated in the sliding carriage. Special guides and an innovative curved grinding system enable the edger carriage to have a fourfold higher load capacity. Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminum sliding table On/off switch on the sliding table for the main and scoring sawblade motors Trimming frame with angle-adjustable aluminum telescopic stop Material roll on the trimming frame Motorized saw parallel stop via control panel Three longitudinal stops with integrated digital displays Eccentric clamp Control of sawblade height, tilt, and parallel stop Pivoting control panel on top Table extension Table extension Sawblade pendulum protection - new exhibition machine -

Condition: new, HOLZKRAFT sc 3c 26 sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment Fjdpfx Asu R S Dhoc Njfu ----- Technical data ----- Trimming length: 2,600 mm, max. cutting height 90°: 100 mm, max. cutting width to the left of the saw blade: 2,310 mm, Cutting width with rip fence: 900 mm, max. saw blade Ø: 315 mm, Main saw blade speed: 4,000 rpm, Motor power 400 V: 5.0 kW, Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Table dimensions: 840 x 560 mm, Format sliding carriage dimensions: 270 x 124 x 2,600 mm, Transport width: 900 mm, Weight: 385 kg - new exhibition machine -

Condition: new, ALTENDORF F 25 sliding table saw, type 1 -Exhibition machine- Double roller carriage swiveling man. Height and swivel adjustment Rip fence with man. fine adjustment Angular mitre fence Large extraction hood Basic scoring unit with LED lighting ----- Technical data ----- Swivel range: 0 - 46 ° Carriage length: 3,200 mm Rip fence: 1,000 mm Cutting height: 100 mm Max. saw blade Ø: 315 mm Crosscut fence extendable up to: 3,450 mm Speeds: 3,600 / 4,200 rpm Motor power: 5.5 kW (7.5 hp) Work table height: 880 mm Ffedpju R S Dbjfx Ac Nsu Suction nozzle Ø: 120 + 80 mm - new exhibition machine -

Condition: used, Panel saw ALTENDORF F45 - used - double roller carriage, tilting, parallel fence with fine adjustment, outrigger table, Ffedsw Nv I Uopfx Ac Nou table extension, anodized aluminium, table width extension, anodized aluminium, mitre fence, overhead guard, narrow and wide ----- Technical specifications ----- Tilting range: 45°, Carriage length: 2,500 mm, Cutting width: 800 mm, Max. saw blade Ø: 450 mm, Motor power: 5.5 kW, Extraction nozzle Ø: 80 / 120 mm

Condition: used, Panel Saw ALTENDORF F45 -used- Double roller carriage, Scoring unit, Rip fence with fine adjustment, Support table, Fodjw Nx A Ispfx Ac Nefu Hydraulic height adjustment, Hydraulic tilting adjustment, Digital tilt angle display, Speed display, Table extension, aluminium anodized, Table width extension, aluminium anodized, Angle/miter fence, Overhead guard, narrow and wide, Automatic brake, Dust tested ----- Technical Data ----- Tilting range: 45°, Carriage length: 3,200 mm, Cutting width: 1,300 mm, Cutting height: 125 mm, Max. saw blade Ø: 400 mm, Speeds: 3,000/4,000/5,000/6,000 rpm, Motor power: 5.5 kW, Weight: 1,040 kg

Condition: used, heavy-duty precision panel saw SCM SI 550 E Class Version: Carpentry - Joinery Cutting length 3200 mm Cutting width approx. 1500 mm Ffodpfx Acex Id Afo Nju Main motor 11 kW 3 speeds: 2500/3000/4200 rpm Mitre fence with length compensation Saw blade up to Ø 550 mm Electric height adjustment and tilting of saw blade with digital displays Machine from retirement / first delivered in 2011 Machine is WORKSHOP TESTED and in EXCELLENT CONDITION Available from stock Lieboch

Condition: good (used), Cleaning line – automatic pass-through shot blasting chamber Fjdpox Rcqmofx Ac Njfu

Condition: excellent (used), Table length 300 cm Ground clearance 105 cm Undercutter 5,5 kW engine Fjdpfx Ajmmci Usc Nefu

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6700x3350x1500 mm Weight 1000 kg Fjdpfsvz Hktox Ac Njfu Total power requirement 6,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2000x2800x1100 mm Weight 310 kg Fsdpfx Acovz Hcpj Njfu Total power requirement 3,8 kw