Used Sliding table saws 2801-3300mm cutting length for sale (245)

Condition: new, Year of construction: 2024, New machine Year of manufacture 2024 Equipment and technical data: L'invincibile SI X - SLIDING CIRCULAR SAW WITH DOUBLE SAW BLADE INCLINATION L'invincibile SI X version CE Volt 400 EU Frequency 50 Hz Pre-scoring unit with independent motorization Cgeb Etrgjv E Sy Uehot Signaling LED of the pre-scoring unit in operation Main saw blade diametermm550 Max. saw blade cutting height at 90°/+46°/-46°mm200/130/105 Cutting width at the parallel stopmm1500 Cutting length with carriagemm3200 x 3200 Three-phase motorkW/Hz9 / 50 Availability: short term Location: Hochheim

Condition: used, Year of construction: 1998, No. 04395 Sliding table saw Panhans 690 B Used, year of construction 1998 Sliding table length 3200 mm Double carriage with hardened steel guides Cutting length 3200 mm Cutting width 1300 mm Cutting height 145 mm Cgsb Etrjr U Ay Asghjt Saw blade diameter max. 450 mm Saw blade quick clamping system APA Cross table with telescopic length stop up to 3200 mm Panhans Super-Gehrfix with auxiliary mitre fence Saw motor 5.5 kW Speeds 3000 - 4000 - 5000 - 6000 rpm Hydraulic height adjustment Hydraulic cutting angle adjustment Digital display cutting angle Digital display speed (defective) Transport dimensions approx. 3500 x 2000 x 1800 mm LWH Weight 1100 kg To avoid possible misunderstandings, an inspection on site is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: used, Year of construction: 1993, Carriage length: 3200 mm Cutting width at the width stop: 1250 mm Cutting width at the crosscut stop: 2800 mm Cutting depth: 145 mm Scoring unit: yes Sawblade height adjustment: electric Sawblade pivot adjustment: electric Width stop adjustment: manual Sawblade angle display: digital Cutting height display: - Width stop display: scale Cob Eewbqi Eotrghsgt Crosscut ruler display: scale Sawblade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Motor brake: yes - automatic Extraction connection: 80 mm and 120 mm Machine length: 3000 mm Machine width: 2200 mm Weight: 1000 kg

Condition: new, Year of construction: 2025, Dimensions and weights Weight approx. 489 kg Connection suction Suction port diameter 120 mm Suction port diameter saw blade protection 60 mm Electrical data Power drive motor 5,0 kW Supply voltage 400 V Mains frequency 50 Hz Circular saw unit Cutting width with rip fence 900 mm Max. Cutting width left of saw blade 3200 mm Trimming length 3260 mm Saw blade inclination 90 45 ° Max. cutting height Cutting height 90° 90 mm Max. cutting height Cutting height 45° 63 mm Explanation Max. cutting height Independent of scoring device Diameter saw blade 315 mm Explanation Diameter of saw blade Independent of scoring device Ceb Ejhkz Ezstrghsgt Saw blade speed 4000 min¯¹ Sliding carriage and table Length of sliding table 3200 mm Width of sliding table 360 mm Height of sliding table 142 mm Table length 840 mm table width 560 mm table height 900 mm Scoring unit Diameter saw blade 100 mm Saw blade speed 8000 min¯¹ The solid work table made of heavily ribbed grey cast iron and the base frame made of welded steel guarantee high torsional stiffness and vibration-free work Smooth-running and precise sliding carriage made of anodized aluminium with proven and permanently smooth-running ball contact system on hardened, 10-year warranty on wear of the guideways Cast iron saw unit with permanently precise double swivel segment guide and zero-point swivel, 6 years Holzkraft warranty on wear of the swivel segments Equipped with powerful three-phase motor Saw blade tilting is controlled at a Ska

Condition: excellent (used), Year of construction: 1996, Functionality: fully functional, cart length 3200mm guidance of cart on steel rods electric adjustment of the disc angle electrical blade height adjustment Cgjb Etrgjvbb Iajhet Blade angle adjustment from the control panel blade height adjustment from desktop right fence adjustable to size from the control panel cutting width 1120 mm maximum blade diameter 400 mm minimum blade diameter 250mm undercutter diameter 125mm power of main engine 5,5 KW power of undercutting motor 1kW rotation speed of main saw 3200/4200/5000 RPM of undercutter 9000 year of production 1996 weight 1100kg overall dimensions 330x350x170 cm 380V power supply

Condition: excellent (used), Altendorf F45 Sliding Table Saw Carriage length 3200mm Hydraulic angle adjustment 0-45 Hydraulic lifting and lowering of the saw 5.5kw main motor 0.75kw scoring motor Ceb Etrowbgfisghegt CE certificate

Condition: used, Year of construction: 2018, Used machine Year of manufacture 2018 Basic equipment Electric height and tilt adjustment 0-46° with automatic cutting height correction when tilting Cjb Etrowb Eitoghogt Control at eye level, pivoting Double sliding table, table length 3,000 mm Parallel stop, manually adjustable via scale, including manual fine adjustment Cutting width 1,000 mm Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm Max. sawblade projection 150 mm Max. sawblade diameter 450 mm Drive power 4 kW (5.5 HP) at 4,000 rpm AKE tool clamping system for the main sawblade Working height 91 cm Productivity package Motor 5.5 kW (7.5 HP) with VARIO F45 - Continuously variable speed control from 2000 - 6000 rpm - Precise speed adjustment to the material increases cutting quality and sawblade service life. Extended cutting height for one-sided tilting This option is equipped with a large extraction hood for a max. sawblade diameter of 550 mm and a max. sawblade projection of 204 mm for one-sided tilting. In combination with a scoring unit, the max. sawblade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP). Two-sided tilting! RAPIDO Plus 3-Axis Scoring Unit With electric height and lateral adjustment, programmable scoring blade height with quick lowering and quick raising, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofitting only possible on machines prepared for a scoring unit. LED Lighting With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked. Sliding Table with a Carriage Length of 3000 mm Basic Equipment Sliding Table with a Carriage Length of 3000 mm The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in the respective hard-chrome-plated guide rods. This running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-cavity system. The table surface is precisely planed and anodized. A hard-chrome-plated round bar, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. DIGIT-L Angle Miter Stop, Cutting to Lengths up to 3500 mm This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the swivel angle is continuously adjustable by 49° and is digitally displayed. The play-free and robust stop flaps can be easily moved and adjusted as individual flaps over the entire range up to a maximum of 3500 mm. For cutting to lengths up to approx. 1700 mm, the roller-supported, stable telescopic

Condition: used, Year of construction: 2022, F25 CE Panel Saw Features: 5.5 kW (7.5 HP) two speeds (3600/4200 rpm) scoring unit LED display manual parallel stop 1000 mm with Digit X manual miter stop 3450 mm large guard 315 mm CE saw blade 100 mm cutting height, 70 mm at 45° manual height and tilting Machine height 880 mm Weight 735 kg F25 double sliding table 3200 mm Storage location: Garbsen Cob Eowc T Rbstrghogt

Condition: as good as new (ex-display), Year of construction: 2022, Carriage length: 3200 mm Cutting width at the width stop: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 200 mm Scorer: yes Saw blade height adjustment: hand wheel Pivot adjustment saw blade: hand wheel Width stop adjustment: manual Display saw blade angle: scale Cutting height display: scale Width stop display: Scale Display cutting ruler: Scala Saw blade diameter: 550mm Speeds: 2800 / 3660 / 4800 rpm Engine power: 7,5 kW Motor brake: yes / automatic Suction connection: 100mm and 120mm machine length: 3600mm Machine width: 2000mm Cgsb Etrgeid Igxshst Weight: 1000kg

Condition: new, Year of construction: 2023, The ALTENDORF F 25 offers everything that a sliding table saw a sliding table saw must be able to do. Whether in your first own workshop, for daily use, in industrial production or as a or as a powerful second machine. The F 25 is the space-saving all-rounder that simply makes you makes you more productive. Materials such as wood panel materials, solid wood, wood-like materials or extruded profiles can be easily processed thanks to optimum precision outstanding cutting quality. The one-sided swivel saw blade also enables angle cuts. The smooth-running double roller carriage, based on the Altendorf system, as well as the digital display of height and height and tilt are standard features. A machine for beginners and professionals alike. Double roller carriage, 3200 mm swiveling, man. Height and swivel adjustment, parallel stop with man. Fine adjustment, angle mitre fence, large extraction hood, PSV ----- Technical data ----- Swivel range: 0 - 46 °, carriage length: 3,200 mm, Rip fence: 1,000 mm with Digit X Cutting height: 100 mm, max. saw blade Ø: 315 mm, max. saw blade projection: 104 mm, Crosscut fence extendable up to: 3,450 mm, speeds: 3,600 / 4,200 rpm, Motor power: 5.5 kW, 7.5 HP, work table height: 880 mm Type: F 25 Version 5 5.5 KW (7.5 HP) 2 speeds Rip fence Digit X, 1000 mm Large extraction hood PSV Without scoring unit, prepared for retrofitting a scoring unit Csbeqvn Rus Etrghsgt installation of a scoring unit Special price ex stock 54634 Bitburg - available immediately -

Condition: excellent (used), Year of construction: 2016, ROBLAND Z 3200 format saw - DTR TECHNICAL SPECIFICATIONS: trolley length 3200 mm cutting width on the right side 1400 mm disc diameter max. 400 mm scoring unit diameter 125 mm 5.5 kW main engine 0.75 kW scoring engine height adjustment angle adjustment 0-45 ° three kinds of blade rotation speed 3000/4000/5000 RPM digital width display on the right 1800 mm / 2800 mm long rule two pawls broken guard Cgsb Eohtq Aqetrghet additional guard for the disc for cutting at an angle table on an auxiliary trolley 700 x 150 mm stub diameter 80 mm and 160 mm dimensions (length / width / height) 340/150/140 cm weight ~ 1000 kg

Condition: used, Year of construction: 1994, Used machine Year of construction 1994 the parallelogram cross table can be unhooked and hooked in by one person angle and cut-to-length beam can be used on both sides the parallelogram cross table can be adjusted on both sides up to 45°, including angle stop cross-cut fence with handwheel adjustment and electronic dimension display; can be used on both sides of the can be used on both sides of the parallelogram cross table Pneumatic quick lowering of the saw blade the roller table with guide rail can be moved back so that it is flush with the machine table. you do not have to bend over the roller table to saw at the parallel fence. With the roller table set back table is set back, cross cuts of up to 1.7 m are still possible Cutting length with roller table 3200 mm Cut-off length at the angle fence 2900mm Cutting width at rip fence 1050mm Saw blade tiltable 0-45.5° Largest saw blade diameter 450 mm largest cutting height 145 mm largest tool width 15 mm saw blade bore 30 mm motor 5,5 kW Saw blade speed 2800/3500/4200/5200 rpm Suction nozzle diameter 120 + 80 mm Machine weight 1050 kg Packaging dimensions approx. 3400 x 1750 mm Cgeb Etrgsv Hinfjhst Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 2014, Carriage length: 3000 mm Cutting width at the width stop: 1000 mm Cutting width at the crosscut stop: 3200 mm Cutting depth: 154 mm Scoring unit: yes Sawblade height adjustment: electric / position control Sawblade pivot adjustment: electric / position control Width stop adjustment: electric / position control Crosscut stop adjustment: manual Sawblade angle display: digital display Cutting height display: digital display Width stop display: digital display Crosscut ruler display: scale Crosscut ruler with miter function: yes Sawblade diameter: 450 mm Speeds: Vario Cgsb Etrgjwawnlshot Motor power: 5.5 kW Spray device: yes Extraction connection: 80 and 120 mm Machine length: 3600 mm Machine width: 2200mm Weight: 1200 kg

Condition: new, Year of construction: 2025, Rojek sliding table saw PF 350 industry - execution The machine design has many technical innovations that increase useful utility properties of this machine. The high quality workmanship makes this sliding table saw the best in its class. The machine is standardly equipped with aluminum sliding table CV 360T with very precise and firm fixing on hardened bars. The machine can be equipped with an aluminum sliding table of multi-chamber, very rigid construction CV 400T, precise and rigid version with steel bar fixing. Aluminum sliding table size 400 x 3200mm. The precision and reliability are guaranteed by massive swivel segment guide of the saw mechanism in the robust cast iron body and scoring unit with separate motor. TECHNICAL SPECIFICATIONS Saw Motor power S6 40% 7,5 kW/3×400 V Motor speed 2 870/min Max. Saw blade diameter with scoring Ø 350 mm Spindle diameter 30 mm (1″) Saw blade spindle speed 4 450/min. Max. Cutting height 120 (83 [45°]), Saw blade tilting 0° ÷ 45°. Max. Cutting width 1 300 mm Cgeb Etron D Arhjghjt Scoring unit Motor power of scoring unit 0,75 kW (1 Kw) Saw blade diameter Ø 120 mm (100 mm) Spindle diameter Ø 20 mm Speed of rotation 8 530/min Machine dimensions length 3 355 mm width 3 450 mm Table height 892 mm Max. Machine height 1 460 mm Table size 1 185 x 500 mm Suction pipe diameter 100 + 100 mm Gross weight 680 kg Net weight 675 kg Aluminum sliding table CV360T table size 3 200 x 360 mm Support frame size 1 240 x 650 mm cutting length 3 200 mm Power line fuse 16 A (25 A) Noise level (without technology) 81,8 dB(A) Noise level (with technology) 85,3 dB(A) Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2022, New machine Year of construction 2022 Manual version Main saw blade speed 3700 min¯¹ Sturdy cast steel construction guarantees precision, smooth running and durability Cast iron saw table Large support surfaces thanks to standard table extension and widening Folding rip fence with fine adjustment Angle-adjustable cross-cut fence, extendable up to 3200 mm, with two folding fences Extension arm with material roller Round steel guide with Ø 40 mm diameter Saw blade pendulum guard that can be swiveled to the side with integrated extraction nozzle Scoring unit with separate scoring motor 7.0 kW industrial motor for continuous operation Equipment details Double cradle saw unit Saw unit made from a single cast iron block with a closed ring structure for maximum torsional rigidity Forced vertical movement of the unit via two ground shafts Adjustment permanently smooth and vibration-free with maximum precision Aluminum sliding table Smooth running and precision are the special features of the CASADEI roller table, which uses an exclusive sliding system that uses rigid aluminum profiles on steel guides with curved contact surfaces and guarantees maximum precision with running accuracy along the entire trimming path of the carriage. The result is impressive: Precision even after many years of intensive use without any maintenance Equipped with a ball contact system that has proven itself a thousand times over Permanently smooth-running Insensitive to dust and dirt thanks to minimal point of contact between ball and trapezoidal rail 10-year Holzkraft guarantee on wear of the guideways Saw unit with swivel segment guide Permanent precision thanks to double swivel segment guide 6-year Holzkraft warranty on wear of the swivel segments incl. the following equipment: Cob Etrgjvaarbohogt Cross-section stop with 2 LCD displays Xenia 40 5256189 Electronic position indicator on the rip fence Xenia 40 5256190 Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2025, Carriage length: 3200 mm Cutting width at the width stop: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 125 mm Scorer: yes Saw blade height adjustment: electric Pivot adjustment saw blade: electric Width stop adjustment: manual Display saw blade angle: digital Display cutting height: Digital Display width stop: Digital Display cutting ruler: Digital Saw blade diameter: 400mm Speeds: 3000 / 4000 / 5000 rpm Engine power: 7 kW Cgob Etjh Uch Djrghet Motor brake: yes / automatic Suction connection: 80mm and 120mm Machine length: 3400mm Machine width: 2000mm Weight: 900kg

Condition: new, Year of construction: 2025, Control unit with electronic display for saw blade tilting and lifting Cast iron saw unit guarantees torsional rigidity and vibration-free operation Easier board feeding due to large edging frame with roller Telescopic ruler with two professional folding stops Excellent cutting precision - sliding carriage is guided with high precision and smooth running by a ball contact system that has been proven thousands of times scoring unit equipped with its own drive and easily adjustable from outside Two-position saw blade pendulum protection manually adjustable Two saw blade speeds selectable (option) Crosscut fence with digital display (option) Made in Italy Aluminium sliding table Equipped with ball contact system proven a thousand times Permanently smooth-running Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail 10 years wood power guarantee on wear of the slideways Saw unit with swivel segment guide Permanent precision due to double swivel segment guide 6 years wood power guarantee on wear of the swivel segments Cjb Etrsff Hdkoghegt Dust extraction connection Suction socket diameter 120 mm Suction socket diameter saw blade protection 80 mm Electrical data Drive motor power 7 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Circular saw unit Cutting width with rip fence 1270 mm Max. Cutting width left of saw blade 3260 mm Trimming length 3200 mm Saw blade inclination -46 - 46 ° Max. Cutting height 90° 1

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Solid German machine construction for trimming, cutting to length, sizing, mitre cutting etc. - Top operation with control panel positioned at eye level, swiveling, incl. template holder - 7" touchscreen control for electromotive positioning of cutting height, saw blade tilt adjustment, cutting width stop and optionally for height and side adjustment of the scoring saw tool database for 50 saw blades and display of the current speed. - electromotive height and tilt adjustment - saw blade tilt range from 0 47° - APA saw blade quick clamping system - main saw blade speed 3000/4000/5000/6000 rpm - Safety guard can be swiveled to both sides, safety hood with interchangeable wide/narrow insert for saw blades up to Ø 450 mm - Electromotive width stop with cutting width 1250 mm - Roller carriage with cutting length 3200 mm and blocking every 50 mm - Cross slide with support roller and sliding support widening in both directionsLength stop with mm scale and extension up to 3500 mm with 2 sliding hinged stops and 1 hinged end stop End stop can be used simultaneously as an angle mitre fence on both sides, infinitely adjustable from 0-46° with automatic length compensation and locking for 15°, 22.5°, 30°, 45° fixable- Push-button control with electronic soft start (start/stop)- Electronic wear-free motor brake - Cutting length 3200 mm - Cutting height max. 155 mm at 90°, 105 mm at 47° - Cutting width at width stop 1250 mm electromotive- Length stop on cross slide extendable up to 3500 mm - Max. Saw blade Ø 450 mm, saw blade Ø 400 mm can be lowered under the table - Table size of the cast table top 1200 x 665 mm - plus table extension 750 x 655 mm- table extension 1430 x 940 mm - Table height / working height 900 mm- Extraction nozzle 120 mm on machine body, 80 mm on protective hood - Motor power 5.5 kW / 7.5 HP- Electrical voltage 400 V / 50 Hz- Roller carriage, length and width stop profile anodized - Machine body and swivel arm powder-coated Color anthracite RAL 7021Sheet metal protective cover top RAL 5000 violet blue, on machine body RAL 7035 light grey - Space requirement: 7110 x 4150 mm - Weight: approx. 1050 kg depending on version up to 1250 kg - CE compliant, GS tested, BG wood dust tested Special equipment: Incl. scoring unit 0.55 kW electromotive positioning for lateral and height adjustment via LED display and memory function; when the scoring saw is switched on, the unit automatically moves to the set position values; when switched off, the unit automatically moves under the table to a lateral parking position, allowing larger saw blades than Ø 350 mm to be used without removing the scoring saw blades Incl. THREE-PHASE MOTOR FOR THE MAIN SAW WITH 7.5 KW (10 HP) instead of 5.5 kW Incl. Quickstep scoring system: tool-free manual adjustment of the scoring width From 2.8 to 3.8 mm by adjusting the scoring width by 0.05 mm per individual step, incl. 1 set of saw blades 125 x 2.8-3.8 x 50 mm Z =12+12 Incl. SWIVEL DEVICE FOR THE CROSS-SLIT Fast ergonomic sliding into the park position Cgob Etrgokwhdtshot Incl. longitudinal stop with digital display mounted on each stop flap, adjustable to 0.1 mm, max. length 3300 mm Incl. transport pallet

Condition: new, Year of construction: 2025, minimax si 400es 32 M A 3 UP In heavy professional version with scoring unit and format sliding carriage made of anodized aluminum Art:No. 5504765 Dimensions and weights Length approx. 3710 mm Height approx. 1717 mm weight approx. 745 kg Connection suction Suction port diameter 120 mm Suction port diameter saw blade guard 80 mm Electrical data Power scoring motor 0,55 kW Power drive motor 7,0 kW Supply voltage 400 V Mains frequency 50 Hz Circular saw unit Cutting width with rip fence 1270 mm Max. Trimming width left of saw blade 3260 mm Trimming length 3200 mm Saw blade inclination 90 45 °. Max. Cutting height 90° 136,5 mm Max. Cutting height 45° 97 mm Explanation Max. cutting height Independent of scoring device Diameter saw blade 400 mm Explanation Diameter of saw blade Independent of scoring unit Saw blade speed 3500/5000 min¯¹ Sliding carriage and table Length of sliding table 3200 mm Width of sliding table 360 mm Height of sliding table 142 mm table length 940 mm table width 560 mm table height 900 mm Scoring unit diameter saw blade 120 mm Saw blade speed 9200 min¯¹ Scoring unit equipped with its own drive and easily adjustable from the outside Smooth-running and precise format sliding carriage made of anodized aluminum with proven and permanently smooth-running ball contact system on hardened, 10-year warranty on wear of the guideways Large table extension (longitudinally adjustable) with material roller on telescopic arm Extendable telescopic cross-cut fence with two folding stops Precise rip fence, foldable for large panels, with quick clamping and integrated fine adjustment Table widening, table extension and eccentric clamp as standard equipment Sawing unit made of a robust cast iron ring with permanently precise dual pivoting segment guide and zero-point pivoting for a smooth and perfect cut, 6-year Holzkraft warranty on wear of the pivoting segments Large-surface work table made of stress-free gray cast iron High dead weight ensures precision and smooth running Equipped with powerful three-phase motor Version M: Height adjustment and tilting of the saw unit electrically, digital display for tilting Version A: On/off switch on the sliding carriage Version M A 3: Programmed control of the saw blade height and tilt and the position of the rip fence, stepless positioning of the rip fence via switch or automatic positioning system, position display via encoder, adjustment via ball screw, incremental adjustment possibility UP version: swivelling control panel at eye level Made in Italy Scope of delivery: Anodized aluminum format sliding carriage Material roller at the extension arm Saw parallel fence with round bar guide Table extension Table extension Folding stops Trimming shoe Eccentric clamp Handle for sliding carriage Saw blade pendulum protection Motorized height adjustment and tilting of the saw unit digital display for swiveling Cgsb Etrehk S S Nsghet integrated on/off switch of the motors in the edger carriage READY3" version (3 axes) Swiveling control panel at eye level Location: Ex stock 54634 Bitburg Immediately available - Storage machine -

Condition: used, Year of construction: 2019, Used machine Year of construction 2019 Technical description: With saw blade that can be tilted on both sides +45.5° to -45.5° Operation: 5.7" touchscreen on the machine body Solid German engineering For trimming, cutting to length, sizing, mitre cutting etc. Dimensionally stable and self-supporting machine body manufactured as a stable welded frame construction made of thick-walled steel profiles and laser-machined sheet steel parts and mechanically processed Cobjuvab Dj Etrghegt The torsion-resistant and finely planed cast table top is mounted on the machine body The robust and powerful saw unit built into the machine body guarantees precise saw cuts The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of gray cast iron with double column guide for height adjustment and the double ball-bearing circular saw shaft ensure absolutely smooth running The double roller carriage is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided in hardened and ground steel guides Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side and Quick-Lock mounts for the ALU length stop profile, can be used on both sides Length stop profile on the cross slide with mm scale and magnifying glass, telescopic extension, extendable up to 3200 mm, incl. 2 robust and play-free stop flaps Table extension 775 x 330 mm on the cast table worktop incl. pull-out tool drawer Width stop with cutting width 1250 mm to the right of the saw blade with fine adjustment, easily adjustable and fixed manually, dimension display via Digit-PAB, digital wireless absolute measuring system in swivel-mounted display box, 0.1 mm adjustable with stored changeover dimension for fence rail high/flat Touchscreen control with 5.7" display Positioning control for height and tilt adjustment, optional axes: width stop, scoring saw with lateral and height adjustment incl. scoring position on the right, calibration device, program memory for 25 programs, tool management for 9 different saw blades. The specified data can be used to store and retrieve the saw blade Ø, log blade, cutting width and max. speed. Speed regulation in steps of 100 Swivel range of the saw blade from +45.5° to -45.5° APA saw blade quick clamping system Automatic length adjustment from the saw blade to the width stop. If the fence is manually adjustable, a graphical representation appears on the display. Enter the values for cutting width and angle, the length is calculated automatically, the value is displayed on the control unit and the rip fence can then be easily adjusted. With the motorized width stop, the length is calculated automatically. Operating hours counter for the order-related working time and for the total running time, in German and English Infinitely variable speed regulation from 1000 - 6000 rpm, for safety with an automatic speed limiter from a saw blade Ø of 400 mm Swing-away guard with rotating protective cover for saw blades up to Ø 500 mm Automatic star-delta start and automatic motor brake Cutting height max. 172.5 mm at 90°, 120 mm at +45.5°, 90 mm at -45.5° Length stop on cross slide extendable up to 3200 mm Roller carriage, length and width stop

Condition: as good as new (ex-display), Year of construction: 2025, HOLZKRAFT S 400 elite S - professional sliding table saws in heavy-duty design with scoring aggregate and format sliding carriage made of anodized aluminum. Art. No. 5504754 Standard with scoring unit with sepa- drive motor, adjustable from outside. - Lightweight anodized aluminum sliding carriage - Cast iron sawing unit with double segment guidance (double cradle) and zero-point swivel zero-point swiveling - High dead weight ensures precision and smooth running - 400 mm saw blade, cutting height 138 mm (even with pre-scorer installed) - Scorer as standard - Saw blade anti-sway guard standard - aluminum format slide 3200 mm with very wide sliding carriage (330 mm) - therefore more supporting surface Technical data Table dimensions 940 x 560 mm Table height 900 mm Capacity 3200 mm Dimensions format sliding carriage 330 x 146 x 3200 mm max. cutting height 90°/45° with scoring 138 /98 mm max. clearance width left of saw blade 3260 mm cutting width with rip fence 1270 mm Saw blade inclination 90° - 45° max. saw blade diameter Ø 400 mm Saw blade diameter scoring Ø 120 mm Main saw blade speed 4000/5000 min-1 Speed scoring saw blade 9200 min-1 Motor power 400 V / 50 Hz / S6 - 40% 7 kW (9,5 HP) Motor power scoring 0,55 kW (0,75 PS) Suction port diameter 120 mm Suction nozzle Ø saw blade guard 60 mm Cgjbjbxpffs Etrghst Machine ex stock Bitburg - free loading -. Special price for the stock machine subject to prior sale

Condition: new, Year of construction: 2022, New machine Year of construction 2022 Suspended control panel with Siemens control and 10" large touch display Control of the saw blade height/inclination and positioning of the rip fence via the control panel Max. Cutting height 200mm Scoring unit with separate drive motor Main saw blade with belt drive and speeds 2800/3665/4800 min¯¹ High dead weight ensures vibration-free operation Large outrigger table with material roller Extendable aluminum longitudinal fence with two folding fences and digital position indicator 7.5 kW main motor mounted on a robust cast iron frame Format sliding carriage with four bearings made of anodized aluminium with high torsional rigidity Cob Etrgekwhq Rohjgt Multiple locking mechanism on the sliding table Table extension and table extension made of thick sheet metal as standard Large pendulum guard can be conveniently raised using a gas pressure spring Saw blade clamping via tool-free Rapid system Location: Hochheim Availability: at short notice

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Cutting width: 1350 mm Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel Cgsb Eev Erkastrghet T6660/1-a Standard cross table for angle cuts T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Condition: new, Year of construction: 2022, New machine Year of construction 2022 Basic equipment Electromotive height and swivel adjustment 0-46° with automatic correction of the cutting height with swivel Control at eye level, swiveling Double roller carriage, carriage length 3,000 mm Parallel fence, manually adjustable via scale, incl. manual fine adjustment, Cutting width 1,000 mm Angle fence with fixed 90° position, manually adjustable via scale up to 3,200 mm Saw blade projection max. 150 mm max. saw blade Ø 450 mm Drive power 4 kW (5.5 HP) with 4000 rpm AKE tool clamping system for the main saw blade Working height 91 cm Motor 5.5 kW (7.5 hp) with VARIO F45 - Infinitely variable speed control from 2000 - 6000 rpm - Precise speed adjustment to the material material increases the cutting quality and service life of the saw blades Cob Etrsmrxznsghegt Extended cutting height for one-sided tilting This option is available for one-sided tilting with a large extraction hood for a max. saw blade Ø of 550 mm and a saw blade projection of max. saw blade projection of max. 204 mm. In combination with a scoring unit saw blade Ø is 500 mm or 179 mm cutting height. cutting height. Only in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis scoring unit one. Tilt With electromotive height and side lateral adjustment, scoring blade height programmable with quick lowering and quick raising , Drive motor 0.75 kW (1 hp), 8200 rpm. Retrofitting only possible on machines with preparation for scoring unit possible. LED lighting With particularly energy-efficient LED technology the danger zone of the scoring unit is clearly marked. The Altendorf double roller carriage is famous for its smooth and precise running. It can be locked in any position. The large double castors, precision-machined from hardened hardened steel, hold the upper carriage in in conjunction with the undercarriage with absolute respective hard chrome-plated guide rods. This running quality is maintained even decades of load and soiling. and dirt. The trolley design is extremely torsion-resistant and multi-hollow chamber system. The table surface is precisely planed and anodized. A mounting for the cross slide and an interface and as an interface for various accessories is a hard chrome-plated round rod, which is positively into the upper carriage. The entire unit is low-maintenance and does not require lubrication. On/off switch on the double roller unit The on/off switch on the double roller carriage is always at hand. The four buttons are used to both the main saw blade and the scoring blade are switched on and off. This saves walking and ensures greater safety Angle mitre fence, cutting to length up to 3500 mm This stop patented by ALTENDORF with integrated length integrated length compensation facilitates the precise cutting of angles and miters in one function. one function. In both positions, the angle can be continuously adjusted by 49° and is is indicated by a measuring scale. backlash-free and robust stop flaps can be easily moved and adjusted as a single flap over the entire the entire range up to max. 3500 mm.

Condition: new, Year of construction: 2025, HOLZKRAFT S 400 elite S 32 MA Professional sliding table saws in heavy-duty design with scoring aggregate and format sliding carriage made of anodized aluminum. Art. No. 5504757 Machine equipped with : - motorized height adjustment and tilting of the saw unit - Digital display for tilting - Integrated on/off switch of the motors in the edger carriage Standard equipped with scoring unit with sepa- drive motor, adjustable from the outside - Lightweight anodized aluminum sliding carriage - Cast iron sawing unit with double segment guidance (double cradle) and zero-point swivel zero-point swiveling - High dead weight ensures precision and smooth running - 400 mm saw blade, cutting height 138 mm (even with pre-scorer installed) - Scorer as standard - Saw blade anti-sway guard standard - aluminum format slide 3200 mm with very wide sliding carriage (330 mm) - therefore more supporting surface Technical data Table dimensions 940 x 560 mm Table height 900 mm Capacity 3200 mm Dimensions format sliding carriage 330 x 146 x 3200 mm max. cutting height 90°/45° with scoring 138 /98 mm max. clearance width left of saw blade 3260 mm cutting width with rip fence 1270 mm Saw blade inclination 90° - 45° max. saw blade diameter Ø 400 mm Saw blade diameter scoring Ø 120 mm Main saw blade speed 4000/5000 min-1 Speed scoring saw blade 9200 min-1 Motor power 400 V / 50 Hz / S6 - 40% 7 kW (9,5 HP) Motor power scoring 0,55 kW (0,75 PS) Suction port diameter 120 mm Suction nozzle Ø saw blade guard 60 mm Machine ex stock Bitburg - free loading -. Special price for the stock machine Cob Etrgsi Dpgyohsgt subject to prior sale