Format saw

Sicar Sega 350 3200

Condition: as good as new (ex-display), Year of construction: 2024, Carriage length: 3200 mm Cutting width at the width stop: 1350 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 170 mm Scorer: yes Saw blade height adjustment: electric Swivel adjustment saw blade: electric Width stop adjustment: manual Saw blade angle display: Scala Cutting height display: - Fpedpfstnggyox Afneb Width stop display: Scala Cutting ruler display: Scale Saw blade diameter: 500mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7 kW Motor brake: yes / automatic Suction connection: 80mm and 120mm Machine length: 3400mm Machine width: 2000mm weight: 900kg

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3-18 m/min.) electronically controlled height and angle adjustment milling spindle D=30 mm Centrex access protection for milling milling fence max. cutter diameter 250 mm infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display complete fence position-controlled adjustable milling fence can be folded up and down milling fence rails 550 mm ALU anodized with safety rulers quick clamping of the milling fence extension frame 1270 mm with emergency stop EURO run-in protection 5.5 kW motor with variable speed control speed range: 1500 - 10000 rpm speed range: 8000 - 15000 rpm HG spindle control panel at eye level with x-motion control table size: 1160 x 770 mm table opening: 320 mm swing-away device for feed unit on F 900 incl. extension for feed unit Fpsdpfxexta Dyo Afnob Location: Supplier

Condition: excellent (used), SCM F520 CE leveling machine Working width 520mm 4kw motor Fjdpfx Aondhdtofnjpb 4 knife shaft Traditional knives Hydraulic lifting and lowering of the work surface Main fence adjustable up to 45 Tops length 3000mm CE certificate

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, input voltage: 380 V, extraction connection diameter: 120 mm, saw blade bore: 30 mm, cutting depth: 110 mm, main saw diameter: 400 mm, extraction nozzle diameter: 120 mm, length stop: 3,200 mm, working width: 1,100 mm, Equipment: motor brake, Format 4 x motion in excellent condition, always worked on by 1 person Fpsdjv Aywpjpfx Afnob

Year of construction: 2002, condition: ready for operation (used), Max. workpiece height: 280mm, tool cone: HSK 63F, weight: 6.5t, an inspection is possible. Fpodon Tpm Hjpfx Afnjb

Condition: as good as new (ex-display), Year of construction: 2025, Spindle swivels: No Height adjustment: Handwheel Pivot adjustment: - Milling jaw adjustment: manual height indication: mech. counter Swivel angle display: - Milling stop indicator: mech. counter Milling spindle diameter: 30 mm Fsdpsgzlpkjfx Afnopb speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Weight: 655kg

Condition: new, Year of construction: 2024, Saw Saw blade rotation speed 3000 / 4000 / 5000 RPM Diameter saw blade and bore 300 – 400 mm, 30 mm Sawblade tilting 90° – 45° Cutting depth at 90° / 45° 125 mm / 90 mm Cutting width parallel fence, version Z400 M, Z400 EL 1350 mm (option 1000 / 1525 mm) Cutting width parallel fence, version Z400 X1, Z400 X3 1250 (option 1500 mm) Cutting length 3500 mm (option 2500 mm / 4100 mm) Dimensions cast iron table 985 mm x 710 mm Fedpfx Afeglfv Sjnepb Dimensions sliding table 3200 (option 2200 mm / 3800) mm x 420 mm Dimensions cross-cut table 1420 mm x 650 mm Length of swiveling cross-cut fence 2295 mm (telescopic 3000 mm) Scoring unit Diameter scoring blade and bore 120 mm, 20 mm Cutting depth with 120 mm diameter blade 3,5 mm Scoring blade rotation speed 8200 RPM Scoring saw motor power 1,3 kW / 2 hp (S6) Weight 850 kg (Z400 – 3200) – 1080 kg (Z400 X3 – 3800) Voltage 400 V 3 phase (option 230 V 3 phase) Motor power (3 phase) 7 kW /9,5 hp (S6), option 9,2 kW / 14 hp (S6)

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Technical specifications: Edge thickness, coil material: 0.4 – 3 mm (material dependent) Edge thickness, strip material: 0.4 – 8 mm (material dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 – 60 mm (restrictions possible for certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Configuration: - Motorised pressure bridge adjustment - Pull-out workpiece support XL, spacing 600 mm - LED light at infeed, 3-colour - Motorised infeed fence adjustment - Extended infeed fence, 1,252 mm - I-Tronic package - Edge Control PPC 322 W controller - IntelliSet: intelligent tool offset - f.a.s.t = fast setting technology - ECO-Mode energy saving function - Prepared for RETURN connection (third-party product) - BS 501 guiding system; precise right-angle workpiece feed for edgebanding of narrow parts on end grain - Workpiece thickness: min. 10 mm - Workpiece width: min. 60 mm - Workpiece length: approx. 140 – 450 mm - FG201 jointing unit with 2 milling heads, 64 mm high - MG 301 edge feeder - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° swivelling for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reaction partner (water molecules) from the PUR, allowing uncured PUR adhesive to remain in the system. The pump operates independently of the machine’s power supply and automatically compensates for vacuum loss. - Full control of PUR! - DW 301 pressure unit with motorised NC axis; first roller driven with pneumatic plunge control, 2 conical follow-up pressure rollers - GM301 spray unit after pressure section for high-gloss edges (slip agent) - KA 501 end trimming unit, pneumatic (60 mm) - Extraction hoods for end trimming unit - FR301 MOT6 multifunction milling unit - Shelf program - FF 301 MOT1 profile milling unit - ZK301 MOT4 scraper unit incl. high-gloss kit Fpodpfxoxymd Te Afnsb - FK702 surface scraper - Spray unit for separation and cleaning agent, complete - GM 301 spray unit after pressure section (high-gloss edges) - SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: short notice Location: Hochheim

Condition: good (used), Year of construction: 2013, Panel saw Felder K 975 Cutting length: 3200 mm Fedoxl Dw Ujpfx Afnjpb Cutting width: 1350 mm Max. cutting height: 130 mm (saw blade diameter: 400 mm) Saw blade and scorer tilting: 0-45° digital Saw blade and scorer height adjustment: digital Manual adjustable rip fence Activation of main saw blade and scorer from control panel and/or machine table Main motor for panel saw: 5.5 kW (7.5 HP) (adjustable 3500/4500/5500 rpm) Scorer motor for panel saw

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. Fpedpfxsu Su Huj Afneb total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ----- Machine will be renovated and functionally checked! Technical data summary (please inquire about any additional accessories included) ----- Generally ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically clocked up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: Glass bead saw pneumatically up and down Spindle description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: Glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glazing bead removal > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with program memory 99 programs > Machine operation: window package Joint control of the right spindle and the glazing bead removal via manual selector switch in the control panel > Spindles with mechanical digital display Option: used planer heads (technical data according to the manufacturer - no guarantee!)