Used section steel shears 0 - 49t punching power for sale (39)

Condition: used, Technical details: Redpfxewp Edao Adaon throat: 250 mm number of strokes: 42 Hub/min sheet thickness - max.: 13 mm round bar steel: 36 mm square edge steel: 30 mm angle steel: 100 x 10 bei 90° mm flat steel: 100 x 18 mm U-H profile: NP 10 knife length: 230 mm total power requirement: 2,5 kW weight of the machine ca.: 1,7 t dimension machine xH: 2,1 x 1,0 x 1,6 m Application: Shearing - notching - punching Notching: material thickness = angle 50 x 8mm and rectangle 50 x 50 x 8mm Punching: max. 20 : 15mm, throat 250mm Foot control no longer available on both sides! Accessories various dies and various punches and small punches (see photo) *

Condition: used, Profile shear for steel with notching unit Ideal for construction sites as it is mobile; of course also suitable for indoor use Peddinghaus 13 RP / 10 Angle profile: 60x7mm Redpfsw Ip D Hsx Adaen T-profile: 60x7mm Solid square: 20x20mm Round: 22mm Flat: 90x14mm Lever shear: Tmax: 10mm Pickup location: 28755 Bremen _____ Our general terms and conditions apply; the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. Technology and wear of the offered items are age-appropriate. Used machines are sold exclusively to tradespeople and without warranty.

Condition: excellent (used), Year of construction: 2017, 1 used hydraulic 5-station combined high-performance profile steel shear Technical Specifications: Punching Station Punching force: 45 t Cutting capacity (steel 400 N/mm²): Ø 22 x 15 mm Ø 38 x 8 mm Throat depth: 175 mm Max. stroke: 50 mm Number of strokes: 20 / min Working height: 955 mm Notching Station Max. material thickness: 8 mm Max. notch width: 35 mm Max. notch depth: 75 mm V-notch tool size: 100 x 100 x 8 mm Flat Steel Shear Max. material width x thickness: 200 x 15 mm 300 x 12 mm Blade length: 316 mm Mitre cut 45° (leg length x thickness): 80 x 10 mm Working height: 955 mm Bar Steel Shear Capacity round material: 30 mm Square material: 25 mm Angle Steel Shear Cutting capacity 90° L-profile: 100 x 100 x 10 mm Cutting capacity 45° L-profile: 70 x 6 mm Cutting capacity U/I-profile (accessory): 80 x 45 mm Cutting capacity T-profile (accessory): 40 x 5 mm Working height: 1140 mm Motor power: 4 kW Machine dimensions: approx. 1500 x 950 x 1680 mm Machine weight: approx. 1400 kg Accessories / Special Features: • Punching station, flat steel shear, angle steel shear, profile steel shear, notching station • Stepless stroke adjustment • Heavy-duty and robust welded construction • Powerful 400 Volt motor • Jog mode • Triangle notching station / V-notch tool Redpfoxz Dn Eox Adajn • With MUBEA holder for punch No. 1, No. 2 and No. 3 as well as die No. 30, No. 45 and No. 60; use of punch and die No. 4 and No. 80 possible as option • Punch holder with bayonet coupling • Advantages of punching over drilling: - Significant time savings – short cycle times - No chips - No coolant required • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1992, machine/vehicle number: 576892, Offer 25455 Hydraulic Flat Profile and Bar Steel Shear with Notching Device and Punching Station Technical Specifications: - Flat Bar Shear: cuts up to 300 x 15 mm - Profile Steel Shear: cuts L-profile steel at 90° up to 120 x 12 mm - Bar Steel Shear: Rjdpfxox S Ib Ho Adaen - cuts round steel up to 40 mm - cuts square steel up to 35 mm - Notching Device: with square notching unit 100 x 42 x 10 mm - Punching Station: - punching force: 600 kN - with stop table - throat depth: 220 mm - punches in steel up to 28 mm Ø in 15 mm or 38 mm Ø in 11 mm - various punch and die sets included - Drive: 400 V / 4 kW - Space requirements: approx. W 600 x H 1550 x D 1500 mm - Weight: approx. 1300 kg

Condition: good (used), Profile steel shear, profile shear, punch, punching machine, hole punch -Pressure force: 40 tons -Punching -scissors -cut -disengage -mechanical release Rodpfxocc Ubuj Adajn -Foot switch: 1 -various stamps and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg

Condition: new, messurements (LxWxH): 1500x950x1680weight approx.: 1,165total power requirements: 4square steel bar: 25round steel: 30cutting pressure: 45throat depth: 220flat steel shear: 200 x 15 0der 300 x 12notching (strenght x width x depth): 8 x 35 x 75punching - round: 22 x 15 oder 38 x 8 oder 100 x 3angle iron cutting 90° or 45°: 100 x 100n x 10 oder 70 x 6 - 5 Arbeitsstationen - mit 1 Fußauslöser Rsdpfxjd Ab Hzo Adaen - hydr. Antrieb - Tisch an der Stanzstation und Ausklinkstation mit Anschlag - Betriebsanleitung in DEUTSCH und ENGLISCH Wir haben viel Referenzen!

Condition: as good as new (ex-display), Year of construction: 2023, Technical data Strokes per minute with 15 mm stroke: 24 /min Punching force: 450 kN Motor power: 2.2 kW Hole diameter and thickness up to max.: 27×13 mm Flat steel up to max.: 300 x10/ 200×13 mm Angle steel 90 degrees up to max.: 80x80x8 mm Angled steel 45 degrees up to max.: 60x60x6 mm Rsdpfx Adjxyyz Soaen Notching up to max.: 7 mm Machine weight: 760 kg

Condition: used, Punching force: 350 kN (punches e.g. 23 m in 12 mm material) Cuts 150 x 10 mm on the flat steel shears Rsdpjxqqphefx Adajn Two separate foot switches for the punching and shearing sides, allowing independent punching and shearing Support table on the punching side with stop cams A range of tools is included in the price

Condition: good (used), punching force: 45 t, - Capacity 45 tons - Hydraulic Rsdpfeu Havwox Adaon - 4 stations - Foot control - Emergency stop - 400V

Condition: like new (used), functionality: fully functional, Year of construction: 2024, actuation type: hydraulic, throat depth: 175 mm, punching force: 45 t, punching diameter: 28 mm, overall weight: 800 kg, Equipment: CE marking, Condition: demo Pressure, tn: 45 Punching capacity: Ø28 mm. in 13 mm. Throat/reach: 175 mm. Flat bar: 300 x 10 /200 x 13 mm. Round bar: Ø30 mm. Square bar: 25 x 25 mm. Angle iron: 80 x 80 x 8 mm. Notching unit: Triangular. Year: 2024 Country of origin: Spain. Size (L x W x H): 1360 x 1100 x 1500 mm. Weight: 800 kg. Rodpfjxn Squsx Adasn Delivered with punching table, notching table and 10 sets of round punches and dies tool no. 6 (Ø4-Ø28 mm.). Has only been used for display. Machine uses Geka tools size no. 6.

Condition: good (used), machine/vehicle number: 98260075, one used profile steel shear WMW Punching capacity 420kN(42Tons) throat of the punch 320mm flat steel shear shears 100x18mm bar shear shears solid material round/square 36/30mm Rjdpfx Adjb Ilbfsaen Further technical data on request.

Condition: used, for sheet thickness up to: 7 mm blade length: 175 mm Round material up to: 20 mm square material up to: 18 mm space requirement: 1000 x 770 x 690 mm hand-guided Redpfx Aodp U Apsdasn

Condition: used, machine/vehicle number: PA 1107, flat steel capacity: 80 x 10 mm electrical connection: 380 V, 1,3 kW space needed: 1000 x 650 x 1480 mm Rjdpfeby Dq Rox Adasn weight: 400 kg

Year of construction: 1998, condition: ready for operation (used), machine/vehicle number: 2131, Max. pressure: 55 kN Throat: 175 mm Adjustable punching stroke: 0 - 28 mm Number of strokes at 15 mm stroke: 30 Notching stroke adjustable: 0 - 60 mm Hydraulic drive: 380 V, 3 kW Redpfxenacy Tj Adajn Floor space required: 1170 x 620 x 1470 mm weight: 930 kg

Condition: good (used), Cutting performance: Flat steel shears Blade length: 250 mm Sheets up to: 13 mm Flat steel up to: 150 x 16 / 200 x 13 mm Profile steel shears Angle iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm T-iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm U and I steel up to: NP 18 Stroke rate: approx. 30 1/min. Bar steel shears Round steel up to: 42 mm Square steel up to: 38 mm Notcher Sheets up to: 12 mm Notching width up to: 50 mm Notching depth up to: 85 mm Hole punch Thrust: 370 mm Punching capacity: approx. 50 t = 25 Ø x 16 mm / 20 Ø x 19 mm Rjdoh Uhb Sepfx Adaon Drive power: 3.0 kW Weight: approx. 2,200 kg Equipment - Hand and foot release - Support table on the hole punch - Various additional tool holders - Various replacement blades - Extensive accessories

Condition: excellent (used), Year of construction: 1979, Overhauled: 1999 Shear force: 2000 kN Cycle speed: 59 rpm Performance: Round bar up to 63 mm in diameter, square bar up to 55 mm Machine weight: 7350 kg Rsdpfxsv Ta Uce Adasn Dimensions: 2260 x 2920 x 1770 mm Bar feeder with separation: Max. bar length: 6 m Dimensions: 6.3 x 1.75 x 2.25 m Weight: 4000 kg Machine is still powered.

Condition: used, Punching force: 400 kN (punches e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shears With pipe notcher on the bar shear Foot switch for stroke activation Rodpow Im Shofx Adaon Support table on the punching side Quick change device Range of tools is included in the price

Condition: used, Year of construction: 1979, round bar steel 28 mm square edge steel 25 mm L-beam 80 x 8 mm cutting capacity 35 t Rsdpfjvw Dvlsx Adaon shear : steel sheet max. 10 mm shear: flat material 100 x 11 mm blade length 175 mm triangle notching device for sheet until 8 mm no. of strokes max. 35 Hub/min work stroke ca. 35 mm total power requirement 1,5 kW weight of the machine ca. 535 kg dimensions of the machine ca. 0,97 x 0,45 x 1,55 m Motorized 4-way profile steel shear on a rotating base and mobile. The machine can also be used for hole punching by purchasing a hole punching device (instead of a notcher). Photo 5 shows which tools the punching device can optionally be equipped with. All performance specifications refer to a material strength of 450N/mm². Machine dealer with own stock of 1600 m².

Condition: used, Max. punching and shearing power: 400 kN Punches e.g. 20 mm holes in 15 mm steel Shears on the flat steel shear on 120 mm to 12 mm steel Rsdpfxewfrc Ij Adajn Further technical data on request With a range of punches and dies as desired

Condition: used, Punching force: 400 kN (e.g. punches 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shears Foot switch for triggering the stroke quick-change device Assortment of tools is included in the price Redpfx Aolf Trksdaon

Condition: new, Metallkraft HPS 45 S Hydraulic sectional steel shear/hole punching machine (3819045). Combined machine with up to 5 processing stations and foot operation. DESCRIPTION - Punching station, flat steel shear, angle steel shear, section steel shear, from HPS 45S with notching station - DS-series with two working cylinders and two foot pedals for simultaneous working with punching station and section steel shear - Stepless adjustment of the stroke - Larger throat for punching station with 620 mm optional, from HPS 55DS available - Heavy and stable welded construction - From HPS 45S with notching knife as standard equipment - With powerful 400 volt motor - V-notching knife, oversized punching device and larger throat for punching station available on request - Two-stage foot pedal for inching operation - Standard with MUBEA holder for punch no. 1, no. 2 and no. 3 as well as die no. 30, no. 45 and no. 60, use of punch and die no. 4 and no. 80 optional (except HPS 40S) Advantages of punching compared to drilling: - High time saving - cycle times - No chips - No cooling Notice: All hydraulic section shears are supplied with oil TECHNICAL DATA Dimensions and weights length (product) approx.: 1500mm width/depth (product) approx.: 950mm Height (product) approx.: 1680mm Weight (net) approx.: 1400kg Notching station Notching station material thickness max.: 8mm Notching width max.: 35mm Notching depth max.: 75mm V-notching tools (accessories): 100 x 100 x 8mm Electrical data Power drive motor: 4kW Supply voltage: 400V Mains frequency: 50Hz Flat steel shear Flat steel shear material width x thickness max: 200 x 15mm Flat steel shear material width max x thickness: 300 x 12mm flat steel shear blade length: 316mm Flat steel shear angle cut 45° side length max. x thickness max: 80 x 10mm Flat steel shear working height: 955mm Redskzk Hvspfx Adaen Punching station Punching pressure: 45t Punching station diameter x sheet thickness max: (steel 400 N/mm²)22 x 15mm Punching station diameter max. x sheet thickness: (steel 400 N/mm²)38 x 8mm Punching station throat: 175mm Punching station stroke max: 50mm Punching station stroke rate: 20/min Punching station working height: 955mm Steel bar shear Steel bar shear capacity round material: 30mm Steel bar shear capacity square material: 25mm Angle steel shear Angle steel cutter cutting capacity 90° L profile: 100 x 100 x 10mm Angle steel cutter cutting capacity 45° L profile: 70 x 6mm Angle steel shears cutting capacity U-I profile (accessory): 80 x 45mm Angle steel shears cutting capacity T profile (accessory): 40 x 5mm Angle steel shear working height: 1140mm SUPPLY - Punching station - Flat steel shears - Angle steel shear - Sectional steel shears with round and square blades - notching station - punch holder with bayonet lock - punch and die reducers no. 1, no. 2, no. 3, no. 30, no. 45 and no. 60 - Punch, flat steel cutter and notcher with adjustable stops - hook wrench - foot pedal - hydraulic oil Made in Turkey OTHER MODELS PLEASE REQUEST

Condition: used, Year of construction: 1976, round bar steel 28 mm square edge steel 25 mm L-beam 80 x 8 mm notching cap. mild steel max. 7 mm cutting capacity of the vertical shear 350 kN Rjdpfx Ajwm Rmnodasn Punch power 190 kN shear: flat material 100 x 11 mm shear: length of knifes ca. 175 mm total power requirement 1,5 kW weight of the machine ca. 0,5 t dimensions of machine L x W x H 1,0 x 0,5 x 1,5 m

Condition: excellent (used), machine/vehicle number: 4077953297009, Max. Punching and shearing capacity: 380 kN Punches e.g. 30 mm holes in 10 mm steel Rsdpfx Adeqlaifeaon Shears 300 mm to 12 mm steel on the flat steel shear

Condition: used, functionality: unexamined, Year of construction: 1979, cutting range square steel at 90°: 55 mm, cutting range round steel at 90°: 63 mm, overall weight: 7,350 kg, Equipment: documentation/manual, emergency stop, type plate available, Peddinghaus Caddy 63 Bar Shear Year of manufacture: 1979 Rsdpfxjwbfn Nj Adasn Overhaul: 1999 Shear force: 20,000 kN Cycle rate: 59/min Machine dimensions: 2260 x 2920 x 1770 mm Weight: 7350 kg Shears: Round bar up to Ø63 mm, square bar up to Ø55 mm (depending on the material to be sheared) Included: Bar feeder with separator Dimensions: 6800 x 1750 x 2250 mm Weight: 4900 kg The machine can currently be inspected while running. Delivery: ex works

Condition: used, dimensions of the machine ca.:1000 x 550 x 1100 m Rodpfxjcxxqns Adasn