Used Steel for sale (17,877)

Condition: used, 113m³ above-ground steel tank on steel supports Diameter: 3.10m Length: 15m Cylinder wall thickness: 8mm Front wall thickness: 12mm The tank has a hole in the top (visible in the photo), which we will weld. The following optional additions to the tank are priced separately: Applying an state hygiene institution approved coating A DN50 float valve, or a DN100 float valve, including installation. The price depends on the float valve diameter. Gbolhcjw El Dlecqqot We have our own specialized trailer. Delivery costs depend on the destination.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 31-44336, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, workpiece weight (max.): 500 kg, spindle speed (max.): 24,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine spindle has been completely overhauled! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 630 mm Travel range Z-axis: 630 mm Pallet size: 400 × 500 mm Number of pallets: 6 Pallet change time: 9 s Max. workpiece size: 720 × 800 mm Max. workpiece weight: 500 kg NC rotary table: B-axis B-axis rotation range: 360,000 × 0.001° B-axis rotation speed: 40 rpm Tool holder: SK 63 Max. tool diameter: 150 mm Max. tool length: 227 mm Max. tool weight: 12 kg Spindle speed: 45–24,000 rpm Spindle torque: 48/72 Nm Spindle drive: 30 kW Feed rate X/Y/Z: 1–60,000 mm/min Gbjlhcezwd Htscqqst Rapid traverse X/Y/Z: 60,000 mm/min Feed force: 10,000 Nm MACHINE DETAILS Total connected load: approx. 60 kW Connection voltage: 400 V Mains frequency: 50 Hz Total weight: approx. 12,500 kg EQUIPMENT Chip conveyor Documentation/Manual

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, Submitting a bid obligates you to collect the item by September 21, 2026! TECHNICAL DETAILS Sheet size: max. 3,048 x 1,524 mm Z-axis stroke: 70 mm Sheet thickness steel: 20 mm Sheet thickness stainless steel: 20 mm Sheet thickness aluminum: 12 mm Positional deviation Pa: ± 0.1 mm/m Positional scatter Ps: ± 0.05 mm Table load capacity: 750 kg Table changeover time: approx. 35 s Positioning speed X/Y axis parallel: max. 100 m/min Positioning speed X/Y axis simultaneous: max. 140 m/min Axis acceleration X/Y: max. 12 m/s² Cutting speed: max. 50 m/min MACHINE DETAILS Beam source: ByLaser 4400 Laser type: CO₂ laser Laser power: max. 4,400 W Wavelength: 10,600 nm Machine weight: 12,000 kg Golhcjzwmn Tocqqobt Laser weight: 1,700 kg EQUIPMENT 2 cutting heads with 5-inch and 7.5-inch lenses

Condition: used, Year of construction: 2007, - Brand : Oil & Steel / Nissan - Type : Snake 2112 Smart - Year of manufacture: 2007 (first operation 2012) - Hours: 4.546 hours - Odometer: 79,776 km. - Weight: 3250 kg. - Drive: Diesel - Trailer: 2000 kg - Working height: 21 meters Gjlhjy Umfcjccqqobt - Lateral reach: 12.8 meters - Lifting capacity: 200 kg. - Narrow + Wide stamping - Dutch license plate : 9-VXV-31 - APK: 22-10-2026 - Export license plate possible - Safety inspection possible - Aerial work platform book available - Maintenance history available - CE document available - Video on our website - Trade-in and transport possible *Type: Snake 2112 Smart * Construction year: 2007 (first commissioned 2012) * Hours: 4546 uur * Km. position: 79776 km. * Weight: 3250 kg. * Drive: Diesel * Lateral reach: 12.8 meters * Lifting capacity: 200 kg. * Dutch license plate: 9-VXV-31 * APK: 22-10-2026 * Working height: 21 meters

Condition: excellent (used), total width: 3,245 mm, total height: 13,053 mm, 90m³ stainless steel tank with heating and a robust funnel DIMENSIONS: - Diameter: 3.245 mm - Height: 13.053 mm Cylinder and bottom plate thickness: 3.1 mm Top plate thickness: 2.6 mm Steel grade: AISI304 (stainless steel) Year of manufacture: 2006 Weight: 4680 kg A DN 600 manhole with a hinged cover is located on the top. Stainless steel pressure-vacuum valve Downstream: DN400 manhole with hinged cover Stainless steel pressure-vacuum valve 1) Upper tank heating: 6 coils, exchange surface area 6.95 m², pressure drop 2 bar Above: 2 coils, exchange surface area 2.33 m², pressure drop 2 bar Device for transferring grounds, test valve 2) Lower tank heating: 4 coils, exchange surface area 4.64 m², pressure drop 2 bar Above: 2 coils, exchange surface area 2.33 m², pressure drop 2 bar. Level gauge Rectangular manhole 555x432 DN70 ball valve The tanks were used in the wine industry. The tanks have a technical drawing. Gelozwm N Djhccqqebt

Condition: used, Steel floor plates Length: 2210 mm Width: 1500 mm Thickness: 260 mm With T-slots in both directions Weight: approx 2 T Gslhccezwxcvoqqebt 3 same plates available.

Condition: used, tank capacity: 50,000 l, total width: 3,600 mm, total height: 8,700 mm, Insulated 50m³ stainless steel tank with heating jacket and agitator Diameter: 3.60m Height: 7.20m + 1.50m agitator = total height 8.70m The tank is insulated and lined with steel sheet. The heating strip is located in the lower half of the tank. Golhezwm Nkjccqqjbt The tank has a flat bottom. Gear motor power: 10 kW/15 kW. Mixing speed: approx. 20 rpm.

Condition: excellent (used), Year of construction: 2014, 4 Qty Stainless Steel Hoppers 3 Qty Hoppers Dimensions 700mm x 1200mm x 1220mm H. 1 Qty Hopper dimensions 1200mm x 1200mm x 1220mm H With manual gate valve Gas strut opening lid Gbelsurf Twehccqqst Internal stainless mesh screen Mobile on lockable castors Some with pneumatic vibration device. Some with level sensor device In excellent condition

Year of construction: 2025, condition: like new (used), functionality: fully functional, Stainless Steel Mixing Tank 500l speed 23 rpm date of production 2024.12 used 3-4 times only Gbjlhcceyhnn Reqqet

Condition: used, tank capacity: 100,000 l, total height: 13,000 mm, outer diameter: 3,500 mm, 100,000-liter stainless steel tank with insulation Diameter: 3.5 m Gbelhcjzvxc Tjcqqjt Height: 13 m

Condition: good (used), tank capacity: 14,500 l, total width: 2,150 mm, total height: 6,200 mm, Equipment: cooling unit, 14500l stainless steel tank with cooling Height: 6200 mm Diameter: 2150 mm Gelhccjzzxhasqqsbt Operating pressure: 0.0 bar internal, 1.0 bar cooling jacket Material: Stainless steel 1.4301 (AISI 304) Design: Cylindrical, upright, on a central plinth; DN 40 outlet; top manway; CIP with RLV line; 3 cooling zones Previous application: Beer 3 units available Each tank has been leak-tested A 12-month warranty is provided for each tank.

Condition: used, total width: 1,900 mm, total height: 6,500 mm, diameter 1.90m height 6.5m Gbelhccszwm U Tsqqet on legs and agitator

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, operating hours: 990 h, machine/vehicle number: 198871007, mast type: telescopic, lifting height: 18,000 mm, overall weight: 2,700 kg, empty load weight: 2,700 kg, transport length: 5,200 mm, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 01/2025, fuel type: hybrid, fuel tank capacity: 9 l, tire condition: 85 %, color: white, maximum load weight: 200 kg, Self-propelled crawler telescopic work platform with 18m working height and 8.5m lateral reach with 200kg basket load!!! in very good condition, overhauled in workshop, white non-marking crawlers radio remote control, petrol and electric operation, hydraulic track widening and narrowing possible via remote control, clearance height is less than 2 meters despite 18m working height very simple design, therefore very easy to service, Honda petrol engine with speed control via remote control (quieter operation possible) All functions that are possible with the petrol engine work just as well as electrically Power and air in the basket Electronics/control units on the platform replaced, hydraulic hoses replaced, new ball bearings for electric motor, new rubber buffers, return filter, engine oil, fuel filter, air filter, paint on the platform is in good condition, no rust. Golovmbzwehccqqobt the basket and the jib arm (the one in front of the basket) are rotatable (both functions are rotatable - special equipment!) the platform has a total of 3 rotation options (tower, jib arm and the basket) and each can be rotated separately! The crawler platform can be rented and purchased. new TÜV can be organized, TIMA transport trailer (with new inspection, new brakes) is also available to buy optionally for 8,000 net we can also organize transport of the platform worldwide!

Condition: excellent (used), Two-chamber stainless steel tank 66m3 (40 + 26 m3) DIMENSIONS: - Diameter: 3,245 mm - Height: 13,053 mm Year of manufacture 2006 Weight: 4,680 kg Upper part: 40° slope - Lower part: 2% slope. DN 600 hatch with hinged cover at the top. stainless steel pressure-vacuum valve At the bottom, a DN400 hatch with a hinged cover a stainless steel pressure-vacuum valve Upper tank heating: 6 coils, exchange surface 6.95 m2, PS 2 bar Above 2 coils, exchange surface 2.33 m2, PS 2 bar A device for moving grounds, test valve Lower tank heating: 4 coils, exchange surface 4.64 m2, PS 2 bar. Above: 2 coils, exchange surface 2.33 m2, PS 2 bar. Gbslhsvlpctjccqqst Liquid level gauge 555x432 rectangular hatch DN70 ball valve The tanks were used in the wine industry. The tanks have a technical drawing. The tanks are dismantled and ready for delivery.

Condition: good (used), total height: 7,500 mm, outer diameter: 2,750 mm, 32000l Insulated stainless steel tank with a side-mount propeller agitator 8 kW power Gbslezvwlgohccqqet Diameter: 2.75 m Height: 7.5 m Slightly conical bottom It is placed on legs

Condition: used, 150m³ (1500hl) Stainless Steel Tank Gjlhccqsxcxitoqjbt Grade AISI304 Wall Thickness: 2.2mm Bottom Thickness: 3.3mm

Condition: reconditioned (used), Sorting machine overhauled and ready for operation the price is depending on condition and equipment, software and hardware status 2008 - 2014 they like to come with material for trial sorting. the machines are for slag, shredder residue, residual fractions, cable, aluminum, Va, Ne about 12-120mm depending on the fraction 1-2 screen cuts should be made. Functionality induction and magnetizability, discharge with air approx. 3- 9 to throughput depending on material up to 40 to Gbolhot Rv Naeccqqst

Condition: good (used), total width: 3,245 mm, 35m³ heated tank Diameter 3.245 mm Gbjljzwm R Ushccqqet Vertical, standing tank. Cylinder and bottom plate thickness: 3.1mm Top plate thickness: 2.6mm

Condition: used, Log Infeed System Manufacturer: Jack Steel Year of manufacture: 2019 Hydraulic log infeed system Twin-chain feed conveyor Gslszmf I Rehccqqsbt Electric control system Suitable for feeding logs to sawmill or sorting lines

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 3,000 h, machine/vehicle number: 200011402, load capacity: 200 kg, lifting height: 14,000 mm, lifting power: 200 kg/m, overall weight: 1,650 kg, empty load weight: 1,650 kg, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 08/2026, fuel type: hybrid, fuel tank capacity: 5 l, tire condition: 50 %, color: white, maximum load weight: 200 kg, operation weight: 1,650 kg, Self-propelled, 14-meter tracked articulated boom lift for 200 kg and 120 kg loads, complete with electronic scale, available for sale! Year of manufacture 2012 for €21,800 net, year of manufacture 2014 with white tracks for €22,900 net. Only 78 cm passage width and 1.95 m passage height! Two-person platform with 1.4 m width, which can be detached from the boom with 2 bolts. Gslhezrf Saeccqqobt Power and optical compressed air connection available in the platform and can be used. Operation is possible with gasoline or 230 V electricity (almost silent), allowing work to be carried out on weekends. All functions (driving, outriggers, lifting, etc.) can be operated with electricity or gasoline. Good condition, white, non-marking tracks, all services performed, switching unit for 120/200 kg is new! Fully functional and ready for use! (Current TÜV inspection has expired). If desired, a current TÜV inspection can be arranged. For further questions, please call or send an email.

Condition: used, 30m³ stainless steel tank features a full-height stainless steel coil Gslhccqeyw Ub Rsqjbt Diameter 2.97m Total height 5.40m Cylinder height 4.30cm Leg height 30cm Cone height 30cm Gear motor height 50cm

Year of construction: 2022, condition: used, Serial number: 47841 HANDTMANN Filling Machine, * Performance: - Filling capacity: up to 2,000 kg/h - Portioning/tying capacity: up to 400 portions/min - Portioning range: 5 to 200,000 g - Filling pressure: up to 25 or 40 bar Length: ~1,000–1,200 mm Width: ~1,100–1,220 mm Height: ~1,750–2,040 mm Weight: ~475 kg With accessory cart Online auction following the closure of the Umiami Research & Development Centre in Villebon-sur-Yvette (Greater Paris, France), dedicated to the development of plant-based food products under the Swap Filet brand. The auction features more than 200 lots, including recent food preparation and processing equipment such as a STEPHAN UM 200 vacuum cooker/mixer (2022), a GOAVEC ENGINEERING mixer/cooler (2022) and a HANDTMANN VF 608 PLUS stainless steel vacuum filler (2022). The sale also includes a wide range of laboratory and process development equipment: Anton Paar particle size analyzer and rheometers, Stable Micro Systems texture analyzer, Dohmeyer cryo cabinets, Hounö and Unox ovens, Mettler Toledo metal detector, Anritsu checkweigher, Sartorius moisture analyzers, as well as numerous food preparation systems, laboratory instruments, stainless steel furniture, shelving, IT equipment and technical equipment. Sale organized by Dome Auctions France, Judicial Auction Office (OVV) No. 331-2026, conducted by auctioneer Blandine Camper. Gbjlhszz Iuioccqqst The online auction opens Tuesday 18 August and closes Wednesday 23 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Monday 21 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Stainless steel tank 100m3 Diameter 4m Total height 8.25m Gbslhccjxtmy Usqqst

Condition: used, Year of construction: 2011, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 400 mm, cutting width (max.): 850 mm, control type: CNC control, pivoting range: 75 °, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, total height: 3,200 mm, total length: 5,100 mm, total width: 3,300 mm, overall weight: 9,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, 1 Mono-spindle drilling machine HDM + HBP band sawing machine Type: HDM 910 HBP 430/854 G (drilling and sawing line for steel construction) Manufacturer: Vernet - Behringer Drilling machine: - Dimensions of working unit: H=3200 L=5100 W=1800 - Weight: approx. 6 tons - Drilling power: 11.7 kW - Rotating speed: 200 to 4000 RPM - Cooling: external lubrication or by centre-cooled drills Sawing machine: - Machine size: Length=1850mm swivel range 3500mm Width=3300mm swivel range 3500mm Height=2600mm - Saw band size: 6.700 x 41 x 1.3mm - Weight: approx. 3 tons - Electric equipment: 400V / 50Hz - Power of motor: 7.5 kW, frequency regulated - Cutting speed: 17-110 m/min Technical capacities: more information can be found in the documentation - Max length of bars: 18m - Max weight of bars: 5 tons Sawing capacities: more information can be found in the documentation Tool clamp: ISO 40 Tool holders: 2x 5 pockets Gbjlhszytmzeccqqjt The industrial PC and the business software were updated in April 2025 (retrofit). The installation has been serviced annually.

Condition: ready for operation (used), Year of construction: 1977, Immediately available from site: Universal profile steel shear with punching unit Peddinghaus Model 210 / 16 Year of manufacture: 1977 Pressing force: 60 t Punching: 27 x 19 mm Gbslhcezwuirjcqqot Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90 degrees: 130 x 13 mm L profile 45 degrees: 100 x 11 mm T profile 90 degrees: 130 x 15 mm T profile 45 degrees: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Price: €1,500 plus VAT, ex site