Used Peddinghaus 210 for sale (128)

Condition: ready for operation (used), Year of construction: 1977, Immediately available ex location: Universal profile steel shear with punch station Peddinghaus Type 210 / 16 Year of manufacture: 1977 Press force: 60 t Punch: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90°: 130 x 13 mm L profile 45°: 100 x 11 mm T profile 90°: 130 x 15 mm T profile 45°: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Priced at €1,750 plus VAT ex location Lhsdpfx Ahsyvzcxovod

Condition: used, 5-fold combined profile steel shears PEDDINGHAUS type 210 AD/13 Machine. No. 529A059 Year of manufacture approx. 1970 Punching machine: Punching force 60 ton. Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal throat depth 365 mm Bar steel shears: Cutting capacity Round 42 mm Square 38 x 38 mm Flat steel shears: Cutting capacity with shearing angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shears: Shearing capacity angle steel at 90° 110 x 10 mm Shearing capacity angle steel at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notcher up to 12 mm sheet metal Ljdpfx Ahsi Duh Ijvehd Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz. - Center punch detection device via hand lever and centering device - Mechanical stroke release via hand lever - Flat steel shears equipped with 2° blade - Mechanical hold-down device on the profile steel shears, bar steel shears and flat steel shears Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg good condition

Condition: good (used), Peddinghaus Combined Section Steel Shear Type 210/ 13 Lodpfx Asv D Nzyehvshd See condition

Condition: ready for operation (used), functionality: fully functional, Hydraulic profile and bar shear, profile shear, Peddinghaus 210/25s, used machine Lhodewcqmaspfx Ahvsd Manufacturer: Peddinghaus Model: 210/25s Punching capacity: Ø40 mm hole in 25 mm thick plate

Condition: good (used), Cutting performance: Flat steel shears Blade length: 250 mm Sheets up to: 13 mm Flat steel up to: 150 x 16 / 200 x 13 mm Profile steel shears Angle iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm T-iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm U and I steel up to: NP 18 Stroke rate: approx. 30 1/min. Bar steel shears Round steel up to: 42 mm Square steel up to: 38 mm Notcher Sheets up to: 12 mm Notching width up to: 50 mm Notching depth up to: 85 mm Hole punch Thrust: 370 mm Punching capacity: approx. 50 t = 25 Ø x 16 mm / 20 Ø x 19 mm Lhedpfeh Uhb Ssx Ahvjd Drive power: 3.0 kW Weight: approx. 2,200 kg Equipment - Hand and foot release - Support table on the hole punch - Various additional tool holders - Various replacement blades - Extensive accessories

Condition: used, round bar steel 34 mm square edge steel 30 x 30 mm L-beam 100 x 10 mm flat steel 100 x 14...160 x 11 mm blade length 175 mm T-beam 100 x 10 mm notching: l + T material 10 mm hole punhing press: pressure 45 t throat 305 mm total power requirement 3 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 0,8 x 1,5 m Lsdpfx Asyh Rnkohvehd * 5-fold combinated profile steel shear incl. flat steel shear profile steel shear bar steel shear notcher hole punch * 2 foot switches * contact limit stop * various punching saddles

Condition: good (used), functionality: fully functional, Peddinghaus profile and punching machine with automatic stop Very well maintained Lodpfjyg D Nnsx Ahvehd Punching force 45 t Incl. various punching dies

Condition: good (used), Profile steel shear, profile shear, punch, punching machine, hole punch -Pressure force: 40 tons -Punching -scissors -cut -disengage -mechanical release -Foot switch: 1 -various stamps and dies Lodpfx Ahjcc Ubujvjhd -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg

Condition: used, Year of construction: 1983, round bar steel 50 mm square edge steel 40 x 40 mm L-beam 140 x 13 mm Punch power 900 kN hole punching press: throat 510 mm hole punching press: max. length of stroke 29 mm hole punching press: capacity (dia. x thick.) 31 x 20 mm notching: l + T material 80 x 14 mm no. of strokes 40 / 45 Hub/min total power requirement 4 kW weight of the machine ca. 3,7 t dimensions 2,1 x 0,7 x 2,12 m Accessories: various punches and dies Lhodpfx Ahovh I T Njved

Condition: used, functionality: fully functional, General Information Manufacturer: Peddinghaus Corporation Model: 210 Type: Hydraulic Ironworker Workstations: Punching, section shearing, flat bar shearing, notching, and round/square bar shearing. Lhedpfx Ahjw Sy Eceved Capacity and Performance Punching Capacity: Approximately 55 - 60 tons (US tons). Punching: Typically, a 25 mm diameter hole in 16 mm thick steel. Angle Shear: 90-degree cut: Approx. 100 x 100 x 10 mm. 45-degree miter cut: Approx. 75 x 75 x 8 mm. Flat Bar Shear: Maximum thickness: Approx. 300 x 15 mm or 200 x 20 mm. Notcher: Plate: Approx. 10 mm. Angle: Approx. 75 x 75 x 8 mm. Round and Square Bar Shear: Round bar: Approx. 38 mm. Square bar: Approx. 32 mm. Other Information: Weight: Approx. 1700 - 2000 kg. Dimensions (L x W x H): Approx. 1500 x 800 x 1900 mm. Verify the accuracy of the information with the seller.

Condition: used, PEDDINGAUS Type: 210/20 EXCELLENT CONDITION Lhodpfxs Dv Nno Ahvjd

Condition: used, machine/vehicle number: 2520, round bar steel:42 mm square edge steel:38 mm L-beam:90° 110x10 mm flat steel:150 x 16 mm blade length:250 mm notching deepth up to:12 mm Lhodpfscxxrpex Ahvjd notching: l + T material:80 x 10 mm hole punhing press: pressure:50 t stroke:27 mm hole punching press: capacity (dia. x thick.):25 x 16 / 20 x 19 mm weight of the machine ca.:1,6 t dimensions of the machine ca.:1,6 x 0,85 x 1,8 m

Condition: used, round bar steel 42 mm square edge steel 38 mm L-beam 110 x 10 mm cutting capacity 150 x 16 mm Lhsdpowth N Hjfx Ahvsd pressure 60 t hole punching press: throat 370 mm hole punching press: capacity (dia. x thick.) 25 x 16 / 20 x 19 mm 720 x 420 mm weight of the machine ca. 2,1 t dimensions of the machine ca. 1,8 x 1,6 x 1,85 m Profilstahlschere - inkl. Fußschalter

Condition: ready for operation (used), functionality: fully functional, Peddinghaus profile steel shears type 210 / 11 Ledpfx Ahov H Ub Rovehd Technical details, see photos Accessories: all punching tools, see photo

Condition: good (used), functionality: fully functional, Year of construction: 1960, machine/vehicle number: G1 077, control type: manual, degree of automation: manual, actuation type: manual, controller manufacturer: peddinghaus, working width: 340 mm, cutting range flat at 90° (Y-axis): 120 mm, cutting range square steel at 90°: 50 mm, cutting range round steel at 45°: 55 mm, cutting range angle steel at 45° (Y-axis): 100 mm, sheet thickness (max.): 28 mm, working height: 800 mm, overall weight: 3,800 kg, total length: 1,000 mm, total width: 2,400 mm, total height: 2,400 mm, power: 7.5 kW (10.20 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: documentation/manual, electrical contact length stop, foot remote control, well-functioning machine with many tools Lhodpfxex H R Ras Ahvsd

Condition: used, for sheet thickness up to: 7 mm blade length: 175 mm Round material up to: 20 mm Lhsdpfx Ahedp U Apevjd square material up to: 18 mm space requirement: 1000 x 770 x 690 mm hand-guided

Condition: used, machine/vehicle number: PA 1107, flat steel capacity: 80 x 10 mm electrical connection: 380 V, 1,3 kW Lhsdpfxeby Dq Rj Ahvsd space needed: 1000 x 650 x 1480 mm weight: 400 kg

Condition: like new (used), Year of construction: 1995, Roller conveyor length: 6000 mm Lhedsgyk A Dopfx Ahved Rolls divided, total width: 280 mm Min.height: 630/760 mm Max.height: 1150/1300 mm Difference between the height information given by rollers and the transverse movement Weight: 625 kg

Condition: used, Year of construction: 1985, round bar steel 40 mm square edge steel 40 mm L-beam 120 x 12 mm Punch power 600 kN hole punching press: throat 400 mm hole punching press: max. length of stroke 32 mm hole punching press: capacity (dia. x thick.) 30 x15 mm hole punching press: capacity (dia. x thick.) 20 x 20 mm notching: l + T material 80 x 10 mm no. of strokes 40 / 46 Hub/min shear: flat material 150 x 15 mm shear: length of knifes 275 mm total power requirement 3 kW Lsdpfxsydqn So Ahvohd weight of the machine ca. 2,9 t dimensions of machine L x W x H 2,18 x 0,83 x 2,15 m Accessories: tool cabinet with various punches and dies, length stop

Condition: excellent (used), Year of construction: 1987, Profile steel shear, profile shear, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shear -Manufacturer: Peddinghaus, hydraulic profile steel shear type Peddiworker 400 Ledpfxsyupxwo Ahvjhd -Drive: hydraulic -Pressure force: 40 tons -Equipment: large support table with stops for die-cutting, various stamps and dies -Production: Punching, shearing, cutting, pipe notching -Dimensions: 870/660/H1630 mm -Weight: 860 kg

Condition: ready for operation (used), Year of construction: 1992, Hydraulic Section Steel Shear Peddinghaus Lhedpfxeyvzcro Ahvsd Hydraulic machine with 5 stations for punching, notching, shearing flat steel, angle steel, and solid material; punch actuation by hand lever; section steel shear operated by foot switch. Punch depth: 510 mm Pressing force: 60 t Throat depth: 510 mm Shearing capacity: 500 x 12 or 400 x 16 mm Punch diameter: 27 mm in 17 mm Punch diameter: 39 mm in 12 mm Round steel: 45 mm Square steel: 40 mm Angle steel: 120 x 13 mm Flat steel: 500 x 12 mm Drive: 7.5 kW Oil capacity: 80 liters Weight: 3 t Price: EUR 3,750 plus VAT, ex works

Condition: used, Year of construction: 1986, L-beam 120 x 13 mm hole punhing press: pressure 60 t hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm Lodpfx Ahot D Nz Aovohd shear: flat material 500 x 14 mm shear: flat material 400 x 16 mm shear: flat material 180 x 20 mm shear: flat material 120 x 21 mm shear: flat material 100 x 22 mm total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic Section Shear - Combined

Condition: good (used), End Roller Stands, Manufacturer: Peddinghaus Height adjustable from 0.68 m to 1.1 m 2 rollers, total width: 260 mm Roller diameter: 108 mm Tube diameter (top – bottom): 70 mm – 90 mm Lhsdpjyuukxefx Ahved Base plate diameter: 500 mm Approximate weight: 40 kg

Condition: used, Year of construction: 1992, functionality: fully functional, drilling capacity: 40 mm, spindle stroke: 300 mm, number of spindles: 3, overall weight: 9,000 kg, Drilling machine for steel structures - drilling holes in steel profiles. manufacturer - PEDDINGHAUS Germany; type - TDK 1000/3; year of manufacture - 1992; number of drilling spindles - 3 pcs. (two horizontal and one vertical); drilling diameter in S355 steel - from 8 to 40 mm; type of drills - HSS high-speed steel; drill mounting in the spindle - Morse taper 4; drill cooling - through the spindle and channels inside the drill; spindle feed - hydraulic with pressure force adjustment; spindle extension - max. 300 mm; material feed and length measurement - roller; CNC control - SIEMENS Sinumerik 840; software - CIM Steel; Production capabilities: •drilling INP I-beams: 80-600 mm, IPE: 80-600 mm, IPB: 100-1,000 mm, IPBL: 100-1,000 mm, IPBV: 100-1,000 mm; •drilling UWP channels: 50 x 25 - 400 mm; Ledepl Dycspfx Ahvjhd •drilling equal-sided angles: 80 x 8 mm - 200 x 24 mm; •drilling unequal-sided angles: 80 x 65 x 8 mm - 250 x 90 x 16 mm; •drilling flat bars: min. 15 mm; power consumption - 35 kW; original paint - the machine has not been painted; weight - 9,000 kg; CE - does not have; The machine is connected to the power supply, ready for testing.

Condition: used, Year of construction: 1994, punching force max. 50 t throat 510 mm stroke 32 mm stroke - stepless adjustable 10 - 32 mm no. of strokes 35 bei 10 mm Hub/min Working height 1070 mm daylight 350 mm table width 255 mm dimensions ca. 1080 x 650 x 1680 mm material layer 630 X 535 weight ca. 1400 kg Scraper, height-adjustable and removable, with interchangeable plate Hydraulic low-pressure finder for foot switch operation Two-stage foot switch and electrical controls Ljdpfx Ajyrhyuehvjhd Integrated hydraulic unit With punching saddle for dies no. 3 and 4, up to Ø 39.5 mm Quick-change device for punches 3 and 6 up to Ø 39.5 mm Peddinghaus blue series with material support table no. 513, dimensions 630 x 535 mm