Used Shear Hydraulic for sale (15,671)

Condition: used, Year of construction: 2009, Technical details: sheet width: 3000 mm plate thickness: 6 mm stroke: 102 mm back gauge: 1000 mm total power requirement: 11 kW Kljdpfx Aeybbz Dsh Nol dimensions of the machine ca.: 3900x1950x1700 mm weight of the machine ca.: 5650 kg

Condition: good (used), Year of construction: 2020, CNC ESA blade clearance adjustment via CNC, manual cutting angle adjustment, thin sheet support. Year 2020. Kodpfoyanqijx Ah Noll

Condition: used, Year of construction: 1994, sheet width / mm plate thickness / mm distance between columns / mm Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Kledpfxeuddh Ao Ah Njl Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment

Year of construction: 1980, condition: used, sheet width / mm plate thickness / mm distance between columns / mm Hydraulic guillotine shears Year of construction: 1980 Brand: Mengele Width up to: 3000mm Sheet thickness CS: 24mm Ksdpfjg Twmhsx Ah Njll Sheet thickness SS: 13mm Stop max.: 1m Weight: 34 tons

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 3100 mm Range back gauge 1000 mm Min. cutting angle 0.5 ° Max. cutting angle 3.5 ° Number of sheetholders 17 Min. number of strokes/min. 6 Max. number of strokes/min 30 Min. blade clearance 0.1 mm Kljdoyag Uaopfx Ah Nol electric powerd back guage with elgo "go-to" controller plate following system at back guage

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, Hydraulic guillotine shear HACO HS 4013 Ksdpeyag Tiefx Ah Noll capacity : 4000mm x 13mm electric powered back guage

Condition: used, Year of construction: 1980, sheet width 3,5 mm Kjdpfx Asyacpmsh Noll cutting width 3050 mm weight of the machine ca. 4,5 t

Condition: used, Year of construction: 1998, gebraucht 1998 090148 prompt, Zwischenverkauf v Belgien 24900 € 1 3100 mm 6 mm Kjdpfx Ajyackwoh Nsll 0.5 - 3.5 ° 9,5 kW 950 mm 4070 mm 2330 mm 3400 mm 1850 mm 5500 kg Motorized backgauge 1000 mm, ball screws, digital display Cutting gap adjustment from the front with handwheel Cutting length adjusment Cutting angle adjustment Downholer safety guard Rear safety via light barrier Foot pedal Table supports with ball bearings 1 side arm 1500 mm 2 support arms Operating manual in German with CE declaration of conformity

Condition: new, Year of construction: 2025, neu 2025 090132 prompt, Zwischenverkauf v Türkei 47500 € 798.38 € 1 41800 € 3100 mm 6 mm 4 mm 50 mm 15 1/min 1.5 ° 16 14 to 1000 mm 200 mm/s 15 kW 200 l 2 Stk. 865 mm 500 mm 3515 mm 4110 mm 2200 mm 3700 mm 2100 mm 7300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Kjdowiqyyspfx Ah Njll Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules WE HAVE MORE THAN 850 REFERENCES!

Condition: good (used), functionality: fully functional, Year of construction: 1998, Used 3 meter guillotine shear from Ermaksan Model: MGM 3100 8 Capacity: 3100 x 8 mm Klsdpfx Ajyabqpsh Nol Refurbished electric backgauge Year of manufacture: 1998

Condition: new, Year of construction: 2025, overall weight: 990 kg, opening width: 788 mm, total width: 920 mm, total length: 2,072 mm, cutting force: 40 t, pressure: 220 bar, operating pressure: 220 bar, warranty duration: 12 months, Hydraulic car body removal shears Weight: 990 kg - Total length: 2072 mm - Width: 920 mm - Rotation: 360 degrees - Cutting power: 40 tons - Oil flow: 50-70 l/min Kljdpfsx Hwblsx Ah Njl - Oil pressure: 220 bar - Excavator weight: 18-24 tons

Condition: used, Year of construction: 1980, Technical data: Max. sheet width: 2500 mm Max. Sheet thickness: 8 mm Weight, approx.: 6400 kg Klodpetvfzcofx Ah Nol

Condition: good (used), functionality: fully functional, Year of construction: 1996, working width: 1,020 mm, sheet thickness steel (max.): 20 mm, overall weight: 11,000 kg, Hydraulic guillotine shear, guillotine for cutting thick steel plates. Manufacturer - COLLY F France; Model - CGH 2010; Year of manufacture - 1996; Kodpfx Ahjx Hrrle Njll Blade length - 1020 mm; Cutting thickness - 20 mm; Number of knife cycles per minute - 7; Electric back gauge with Elgo programmer; Photoelectric safety barrier; Motor power - 30 kW; Base dimensions - 156 x 190 cm; Height - 210 cm; Weight - 11,000 kg; CE - yes. Machine connected, ready for inspection.

Condition: excellent (used), Hello, For sale: Guillotine Shears Type NTA-3150 Cuts sheet metal up to 12mm thick. The machine is operational and in continuous use; inspection and testing are possible. The price listed in the advertisement is net and VAT must be added. Kljdpfjxyi T Rsx Ah Nsl The machine can be inspected in Starachowice at ul. Kwiatkowskiego 13. Telephone contact from 7:00 to 16:00.

Condition: used, Hydraulic Plate Shear LVD Type HST-C 31 / 6 Machine No. 21348 Year of manufacture: 1994 Cutting length: 3,100 mm Cutting thickness: 6.35 mm Backgauge: 770 mm Working height: 950 mm Hydraulic sheet hold-downs: 17 units Hydraulic tank capacity: 150 liters Motor power: 7.5 kW Power connection: 400 Volt, 50 Hz, 9.5 kW, 19 Amp. - Motorized backgauge with digital actual position display ELGO - Backgauge adjustment via push button – rapid in both directions and fine adjustment by jogging in the minus direction only - Sheet lifting device below the backgauge with pneumatic lifting cylinder - Continuously adjustable blade gap from 0.1 mm via handwheel with analog display - Cutting angle adjustment in 5 steps from 1.5° to 3.5°, electrically pre-selectable - Left side angle stop 1,500 mm - 2 table extensions as sheet supports - Electric foot switch Kjdotvb Iujpfx Ah Nell - Comprehensive operating manual Space requirements without front table extension (L x W x H): 4,150 x 1,850 x 1,900 mm Space requirements with front table extension (L x W x H): 4,150 x 2,850 x 1,900 mm Weight: 5.5 tons Good condition Very good cutting results, including with thin sheet metal

Condition: used, Year of construction: 1990, Control Siemens Simatic OP17 weight 4,8 t Kledpex U A R Iefx Ah Nel cutting width 2550 mm sheet width - max. 4,5 mm

Condition: used, Year of construction: 1999, weight of the machine ca. 16 t Kedpfxox U A Hvs Ah Nell sheet width 3150 mm sheet thickness - max. 16 mm sheet width - min. 1,6 mm voltage 400 V range - high tensile 3950x2475x2520 mm

Condition: good (used), Year of construction: 1982, sheet width . mm working width 4500 mm plate thickness . mm 8mm distance between columns . mm Kjdpfxeq Dta Io Ah Noll

Condition: ready for operation (used), Year of construction: 1990, Immediately available ex stock: EHT Hydraulic Guillotine Shear Type EHS 10 – 31 Year of manufacture: 1990 Kljdpfx Aoyb Ry Aeh Nel Cutting length: 3,100 mm Material thickness: 10 mm Electric backgauge: 10 – 1,000 mm Adjustable cutting angle: 1 – 4 degrees Hydraulic hold-downs: 16 units Strokes/min: 22 Drive: 15 kW Weight: 8 t Spare blades included Price: EUR 5,750.— plus VAT, ex location

Condition: used, Year of construction: 2002, gebraucht 2002 090129 prompt, Zwischenverkauf v Türkei 27800 € 1 3100 mm 10 mm 350 mm 10 1/min 1.5 ° 1000 mm 22 kW 3800 mm 3600 mm 2000 mm 9800 kg Swing cut construction NC-preselection system ENC100 for back gauge, cutting length and piece counter Motorized back gauge 1000 mm on ball screws, folding upwards Hydraulic hold down pistons Foot switch Central, manual blade gap adjustment Kedpfx Ahex Urrhs Nell Cutting line illumination Broad table with balls Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Oilfilling Light barrier on the back of the machine User manual in GERMAN with EC declaration of conformity

Year of construction: 2005, condition: ready for operation (used), A hydraulic CNC plate shear Baykal is available. Cutting length: 3060mm, max. sheet thickness (St42): 10mm, operating pressure: 260bar, stroke rate: 12/min. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2000mm, weight: approx. 9600kg, control system: Delem DAC 310. Documentation available. On-site inspection is possible. Kljdpfeya Hwzsx Ah Nsl

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Additional information - Specification - Back stop Klsdpfx Aheya Ea Ij Njl - Roll shelf

Year of construction: 1998, condition: ready for operation (used), Immediately available from location: Hydraulic guillotine shear Hera Model TK 3000 / 10 Year of manufacture: 1998, only very few operating hours (as new) Motorised backgauge Backgauge controlled – 1000 mm Machine control: Siemens Simatic CP 7 Cutting length: 3050 mm Material thickness up to 10 mm Drive: 15 kW Weight: 8 t Kljdpfx Ahsyaybao Nsl Price: €9,500 plus VAT, ex-location

Year of construction: 1991, condition: ready for operation (used), Available immediately from location: Technoimpex hydraulic guillotine shear Klodeyaya Aspfx Ah Nol Type HS 5 / 2550 Year of manufacture 1991 Cutting length 2550 mm Material thickness 5 mm Digital backgauge 1000 mm Drive 5.5 kW Weight 4 tons Price: EUR 4,500 plus VAT, ex location

Condition: used, LVD Shear Kodpfxjx Tqtbs Ah Nell Type HST C-10/31 Capacity 3000 x 10