Year of construction: 1997, Condition: good (used), material dimensions max. round: ​Ø 380 mm max. square: 380 x 380 mm segment length with single stroke: 10 - 510 mm with multi stroke: max. 4590 mm dimensions LxWxH: 3100 x 2200 x 1850 mm Cgjlin Seha Hdhowgot weight: 3.100 kg

Condition: like new (used), Year of construction: 2018, SINGLE HEAD CUTTING MACHINE WITH Ø 600 MM RISING BLADE. Manual rotation of the work surface, up to 20°, both to the right and to the left. Quick positioning of the work surface on pre-selected angles (90°, 45°). Manual positioning with pneumatic locking on any intermediate cutting angle. DIGIT = with digital display for the angular positioning of the cutting surface. MQL = Tool lubrication with Minimum Quantity Lubrication system Cutting unit rotation capacity to the right.°20 Cutting unit rotation capacity to the left°20 Blade diameter mm600 Cgoliov I N Eyen Swgjt Blade hole mm50 Tool rotation speed rpm2800 Motor power kW4 Machine length mm ± 920/1520 Machine width mm ± 1320 Machine height mm ± 1525/1800 max Machine weight kg ± 470

Condition: good (used), Table size: 610 x 610 mm Finish: 780mm Colioixtu Nsn Swgjgt Adjustable table!

Condition: new, Year of construction: 2025, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Cutting band size [mm] 2500 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Csliemrnk Esn Swgegt Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2025, Condition: new, The PD 50 e length stop with servo motor drive has a modern control positioning device that ensures that the carriage holds the material in the desired position even under load. The control provides information in three display fields about the actual value, the target value and the number of pieces to be processed (option). Motorized retraction of the carriage is possible. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • Positioning control for automatic positioning • Possibility of positioning according to absolute or incremental dimensions • easy-to-read LED display for nominal size, actual size and quantity (option) • Carriage with DC servo motor and encoder • Carriage with multiple ball bearings • Control positioning device • Positioning accuracy 0.1 mm/m • Motorized clearance function • Steel guide rail with precision rack • Multi-adjustable stop arm • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.5 m • Left or right hand versions available • Accesories: -Stop arm with spring damping -Arm retraction with impact damping via pneumatic cylinder -Piece counter for number of pieces/cuts made -programmable NC control with 3000 memory locations -Different material roller conveyors (e.g. roller conveyor width 290 mm or 407 mm etc.) It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us. Colin Swefv T Dwjgjgt

Condition: good (used), Cutting range 90° round: 240 mm Square approx.: 260 x 180 mm Saw band: Cutting speeds: Fixed jaw: 310 x 110 mm Moving jaw: 190 x 110 mm Opening: 270 mm Equipment: mobile Condition: good Connection: 1,1 kW Weight: 230 kg Cgelin Soimqt Aowgot Dimensions: 1.400 x 800 x 1.300 mm

Condition: good (used), Fully automatic with miter cut, Max. Diameter or cutting width 180 mm, smallest dimension to be sawn D 10 mm, Automatic feed single 600 mm, max. feed length multiple 1800 mm, Minimum offcut length for single cut 20 mm, minimum offcut length for automatic operation 110 mm, Table rotation range for mitre cut 135 degrees, Total drive power 3.2 kW, Weight without roller conveyors 1100 kg, coolant system, Colin Swetqdvgjgjgt the saw is still under power, Functional video available, Operating instructions with circuit diagrams and spare parts lists.

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 300242, cutting range round at 90°: 460 mm, total length: 2,320 mm, total height: 2,570 mm, total width: 3,660 mm, overall weight: 7,500 kg, cutting range square at 90°: 600,460 mm, cutting diameter: 460 mm, space requirement height: 2,570 mm, space requirement length: 2,320 mm, space requirement width: 3,660 mm, cutting length (max.): 9,999 mm, working height: 720 mm, outer dimension length: 2,320 mm, outer dimension width: 3,660 mm, section length (max.): 9,999 mm, section length (min.): 8 mm, coolant pump power: 180 W, saw drive: 9,200 W, opening width: 600 mm, saw band width: 54 mm, saw band length: 7,470 mm, Equipment: rotational speed infinitely variable, BAND SAW KBR 460 NA A metal cutting band saw that combines high precision, power and automation. The KBR 460 NA from KALTENBACH is a solution designed for demanding production and industrial plants • High efficiency - a powerful main engine (7.5 or 9.2 kW) guarantees efficient and fast cutting. • Precision - infinitely variable cutting speed ensures perfect adjustment to any material. • Wide cutting range - supports round materials up to Ø 460 mm and square materials up to 600 x 460 mm! • Automation - possibility of setting sections up to 9999.9 mm long, which eliminates the need for manual operation. • Minimum waste - the automatic system allows you to leave a residual element only 30 mm long! • Stable and durable construction - weight 7500 kg guarantees reliability and long service life. TECHNICAL DATA Weight: approx. 7500 kg Dimensions (L/W/H): 2320 x 3660 x 2570 mm Width with chip feeder (optional): 4650 mm Cutting band Dimensions: 7470 x 54 x 1.3 mm Cutting speed: infinitely variable (approx. 1-7) Working range Material dimensions • Round material: max. Ø 460 mm • Square material (W x H): max. 600 x 460 mm Cgslisv Irtgsn Swgot Cutting lengths • With single stroke: min. 8 - 760 mm • With multiple stroke: max. 9999.9 mm Min. residual length in automatic mode: 30 mm Working height: 720 mm Electrical data • Main motor: 7.5 or 9.2 kW • Hydraulic motor: 2.2 kW • Coolant pump: 0.18 kW • Chip feeder (option): 0.18 kW • Roller conveyor drive (option): 0.18 kW • NC positioning unit (option): 0.37 kW

Condition: used, AMADA H250W saw very good condition Celin Sjv A H T Rjwgsgt fully functional

Condition: used, Year of construction: 2013, operating hours: 38,000 h, Functionality: fully functional, machine/vehicle number: 10006247, space requirement width: 2,300 mm, space requirement length: 1,850 mm, space requirement height: 1,820 mm, net weight: 1,850 kg, The Behringer HBE261A Dynamic automatic band saw cuts a wide range of materials, from profiles and pipes to solid materials. Cutting range 90° round 260 mm Cutting range 90° flat 300x260 mm Minimum circular sawing size 10 mm Minimum flat sawing size 10x8 mm Cgslisv Ilggjn Swgst

Year of construction: 2025, Condition: new, The manual length stop with hand wheel and electronic dimension display MD 100 h is ideal for frequently changing section lengths and for stopping long materials. It enables the carriage to be moved quickly and precisely using a hand crank. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • Suitable for hitting steel profiles and solid materials • Hand wheel drive for the carriage • Pneumatic stop clamping with high holding power • digital actual length display in the working area • Direct distance measurement via sensor / magnetic tape • Control with dimensional error compensation • Trolley with 3 ball bearings • raise and lower manual arm • Cable chain with steel storage tray • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.5 m • Left or right hand versions available • Mounting screws Cslieidmp Ten Swgjgt • Accesories: – Stop arm with spring damping – Arm retraction with impact damping via pneumatic cylinder – pneumatic arm raise / lower – Piece counter for the number of pieces/cuts made – various material roller conveyors

Condition: used, Total power requirement 12 kW weight of the machine ca. 4,1 t dimensions of the machine ca. 3,1 x 5,9 m saw band length 6300 mm capacity 90 degrees: round 410 mm capacity 90 degrees: flat Cgslin Swov Aya Roget 620 x 400 mm capacity 45 degrees: flat 450 x 400 mm cutting range 30° flat 300 x 300 mm cutting speed 20 - 140 m/min feeding length 3000 mm Control unit NC Coolant Oil mist and not white water

Year of construction: 1986, Condition: good (used), Automatic operation Cjlinopxnkgs Swgogt Feed with position control, min. Cut-off length 8 mm, Feed stroke max. 400 mm, for cut-off lengths over 400 mm, the stroke is repeated until the set dimension is reached. until the set dimension is reached. The cut-off length is displayed digitally. The desired number of cuts can be preselected. Sheet tear control, Chip scraper brush, chip conveyor, roller conveyor, support length 3 m, 5 new saw bands Cutting range round: 320 mm Rectangular cutting area: 320 x 320 mm Saw blade dimensions: 5250/5350 x 32 x 1.1 mm Band speed: 15 - 110 m/min Saw drive: 380 V, 4 kW Weight: 2200 kg Operating instructions, electrical and hydraulic circuit diagrams, Spare parts list

Condition: excellent (used), Metal band saw blade, band saw blade, metal saw band -Manufacturer: Bayerwald, metal band saw M51 K-PLUS unused -Type: M42 3830x27xNumber: 3x metal saw band available Cslin Sov Av H Hjwgsgt -Price: per piece -Transport dimensions: Ø mm -Weight: 0.8 kg/piece

Condition: new, Year of construction: 2025, Upgrade your aluminium production to a high-technology, high-efficiency, high-safety saw. X45 is an advanced high-accuracy up-cut saw for small-profile cutting of straight or mitered aluminium parts up to ±85°. Two-hand button-press cutting with full saw guarding (including tunnels on each side) preventing access to the cutting area. Category 3 safety design with a dual-channel safety relay and a reset button. Electronically settable up-stroke point to any position (without a sensor) for shortest cutting distance. Advanced chip collection design with up to 94% chip collection efficiency and up to 8× less chips to clean from your saw / floor compared to traditional saws. • Ø450 mm TCT saw blade with powerful 3.0 kW drive motor • Ergonomic usage design with blade changed from the front of the machine • AS / NZS 4024:2014 Category 3 safety standard, with safety relay and two-hand cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • Electronic lockout of the blade / machinery panels preventing access to rotating assemblies also during spin-down. • Safety switch detection of opening of the access panels triggering an e-stop. • 2× vertical and 2× horizontal clamps with adjustable clamp pressures. • Adjustable saw mitre angle to ±85° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light Cgelin Swev Iccfsgot • 2× Ø100 mm points for chip collection • Optional 3.8 kW vacuum chip extractor

Condition: refurbished (used), Year of construction: 1988, For sale is a Kaltenbach cold circular saw. The machine has been completely dismantled and rebuilt. In the course of the overhaul, the gearbox, motor and hydraulics were overhauled. The table has been turned flat and re-stored. Gearbox free of play! Type: KKS 400 E Saw blade Ø: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Fast forward/reverse: 1,550 mm/min Max. working range: 130 mm Working range square material: 120 mm Working range flat material: 305 x 20 mm Working range round material: 130 mm Working range min.: 10 x 10 mm Mitre range: 0° - 90° - 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection / collection in 89558 Boehmenkirch Cslev Iaxqsin Swgjgt Shipping possible on request Forklift available for loading.

Year of construction: 2025, Condition: new, The robust manual length stop MD 100 d enables you to efficiently increase the productivity and quality of your production. The operator can move the carriage to the desired position quickly and accurately. The specially developed clamping system gives the carriage a very high holding power. The length measurements are taken via an easy-to-read digital display on the carriage. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • suitable for striking steel profiles and solid materials • Trolley with 3 ball bearings • smooth-running for quick and precise length positioning • Manual stop clamping via large adjustable hand knob • specially developed clamping system with very high holding power. • raise and lower manual arm • digital position display with a resolution of 0.1 mm • Standard measurement lengths: 1m to 6m, maximum up to 20m Colineidmppj Swgogt • Total length of the system = measuring length + 0.3 m • Left or right hand versions available • Mounting screws • Accesories: -Stop arm with spring damping -manual arm retraction via hand lever -Arm retraction with impact damping via pneumatic cylinder -various material roller conveyors

Condition: new, cutting diameter 120 mm capacity 90 degrees: flat 120 x 102 mm capacity 90 degrees: square 112 x 112 mm capacity 45 degrees: flat 78 x 78 mm capacity 45 degrees: round 80.0 mm capacity 60 degrees: flat 50 x 43 mm capacity 60 degrees: round 50.0 mm cutting speed 35 - 80 m/min saw band length 1440 x 13.0 x 0.65 mm voltage 230 V engine output 1300 Watt weight 18.0 kg range L-W-H 520 x 400 x 900 mm Portable metal band saw for cuts between 0° and 60° Dry cutting (no coolant) Cgjlinov Anime Swget Up to 60% faster cutting compared to a conventional band saw thanks to the NG system with opposite direction of rotation of the saw blade. - Dry cutting (no coolant) - Innovative, coupled band tensioner . for checking and setting the correct band tension - Steel vice with prism-shaped guide - Powerful 1300 W motor - "Constant Speed" setting with current limitation - Stable, robust frame made of sectional steel - Bracket locking device for easy transport Accessories included: - Adjustable length stop 500 mm - Detailed operating instructions + maintenance manual - Circuit diagrams and exploded drawings - Saw blade for pipes and profiles

Condition: used, Year of construction: 1986, cutting diameter 400 mm saw band length 5680 mm Cgslisu Rt H Dsn Swget cutting width 450 mm cutting speed Stufenlos m/min total power requirement 3,5 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,5 x 1,4 x 2,0 m Vice can be adjusted for angle cutting.

Condition: good (used), 1 x hydraulic hacksaw Kasto EBS 450 with roller stand Technical data: Cgolin Swjruqv Hjgot Sawing area: Ø 450 mm round / 425 x 350 mm flat Saw blade dimensions: 700 x 50 x 2.5 mm 4 stroke speeds 40 / 57 / 80 / 115 H/min Cutting pressure: infinitely variable Mitre: 45° - Coolant device The machine can be inspected under power.

Condition: used, saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade Cgjlinjv Ai Sve Swgot -Manufacturer: Arntz, saw blade Ø 520 x 4.5 mm -Inside: Ø: 80 mm -Bolt circle: Ø 123 x 23 mm -Number of teeth: see photo -Weight: 6 kg

Condition: excellent (used), Functionality: fully functional, Frietsch SAWING MACHINES Buying and selling KASTO sawing machines Dear Sir or Madam, we buy and sell, rework and overhaul KASTO sawing machines. Cgslinjgwaf Do Swgot We have had experience with KASTO sawing machines for more than 40 years and have specialized in overhauling the machines. The machines are overhauled by specialist staff according to KASTO factory standards. We also look for KASTO sawing machines for machine overhaul according to your requirements. Good price-performance ratio through professional machine overhaul. Technical data KASTOtwin A 4 Dimensions of standard machine Length 2,294mm Width 2,460mm Height max. 1,915mm Total weight approx. 2,500kg Total drive power 7.0kW Drive power of frequency-controlled saw motor 4.0kW Cutting area in mm approx.: Cutting area Ø 400 mm Cutting area, flat (W x H) 400 x 400 mm Smallest dimension round Ø 10mm square, H x W 10mm Material feed length single max. 750mm Multiple feed 9,999mm Shortest cutting length 6mm Smallest diameter to be sawn 10mm Minimum remaining piece in single cut 15mm Shortest remaining piece length in automatic mode 100mm Cutting speed, infinitely variable 20 - 100m/min Saw blade dimensions Material support height 700mm Cutting feed: infinitely variable Material feed ball screw Belt tension Control CompactControl Chip pressure regulation 20 to 60 bar Belt slip monitoring Coolant device

Year of construction: 2025, Condition: new, The manual length stop with hand wheel and electronic dimension display MD 50 h is ideal for frequently changing section lengths and for stopping long materials. A hand crank enables the carriage to be moved quickly and precisely. Celioidln Tsn Swgogt

Condition: used, Year of construction: 1992, cutting diameter 260 mm saw band length 3890 mm cutting width 340 mm cutting speed Stufenlos m/min total power requirement 2,4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,5 x 1,4 x 2,0 m Vice can be adjusted for angle cutting. Csliju Rt Hdjn Swgegt

Condition: used, Year of construction: 1990, cutting diameter 340 mm saw band length 5334 mm cutting width 340 x 340 mm dimensions of saw-band 5334 x 38 x 1,3 mm min. cut-off length 6 mm multiple feeding length 5400 mm cutting speed 2 m/min power capacity 5,5 kW voltage 380 V total power requirement 8,0 kW Cgslin Swst Tqlbjgot weight of the machine ca. 2,5 t dimensions of the machine ca. 2,85 x 2,30 x 2,10 m Horizontal automatic band saw.