Vertical band saw Band saw

DOALL 30-12 U (2015)

Condition: good (used), Year of construction: 2002, Manufacturer: BRÜCK Tip: 12/1600 Load capacity: 12000 kg Hfsdpfx Ahshrnbkjvsd Max sheet width: 1600mm Coil diameter: 1800mm Weight : cca 14 t Without control cabinet!

Condition: excellent (used), Year of construction: 2015, operating hours: 50 h, functionality: fully functional, machine/vehicle number: P1.2014.86242, The subject of the report is a Dreistern laser-welded profile production line. The machine has been tested but was not put into production. It has operated for 50 hours. It is designed for the forming of cold-rolled sections, either open or closed, which are laser-welded. The input material for profile production consists of coils made of black or galvanized steel. Component parts (serial numbers in accordance with technical documentation): 1 - Soprem H1250/D/1700ZR decoiler, serial no.: 20140388/1, year of manufacture: 2014 2 - Soprem CH-2540 strip end welder, serial no.: 20140388/2, year of manufacture: 2014 3 - Dreistern RS616 multi-roll forming machine, serial no.: 15773, year of manufacture: 2015 - base frame, serial no.: N/A, year of manufacture: N/A Hsdjxz Tuuepfx Ahvefd - P60/80/90 gearbox unit, serial no.: N/A, year of manufacture: N/A - servo drive, serial no.: N/A, year of manufacture: N/A - Dreistern P60 forming, embossing, and perforating stands, serial no.: N/A, year of manufacture: N/A 3 x Dreistern RC1500, RC1501, RC1502 roll forming tools, serial no.: N/A, year of manufacture: N/A 4 - Trumpf TruLaser Cell 1100 laser, serial no.: S1200C0090, year of manufacture: 2014 5 - Dreistern TS214.10 cut-off machine, serial no.: 15122, year of manufacture: 2015 - Dreistern S 200.10 circular saw, serial no.: 15094, year of manufacture: 2014 6 - Electrical cabinets 7 - Laser safety system

Condition: ready for operation (used), Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction unknown, was overhauled in 2022. Hfjdpfx Aon Tpmushved

Condition: used, Year of construction: 1968, roll diameter 500 mm throat 1050 / 485 mm workpiece height 300 mm saw band length 3920 - 4050 mm cutting speed 15 - 940 m/min table height 1040 mm table surface area 750 x 800 mm Table tiltable 15 Grad total power requirement 4,0 kW weight of the machine ca. 1750 kg Hsdpoiqp Erjfx Ahvjfd dimensions of the machine ca. 2100 x 1000 x 2100 mm - Unique mitering range left/right up to 30° acute angle - Mitering adjustment via lockable detent every 15° - Adjustable saw blade for optimum cutting angle - Hydraulic clamping device on both sides - Electric blade breakage monitoring - Smooth-running saw carriage via preloaded recirculating ball bearings - Additional table 450 x 450 - Machine light

Condition: new, The Servoturn 500/2000, a remarkable addition to the category of Conventional Horizontal Lathes, excels within the Servo-conventional Lathes group. This KNUTH machine combines cutting-edge feed technology with robust mechanical engineering, featuring ball screw drives and electronic hand wheels on all axes, ensuring precision and efficiency typically found in modern CNC machines. Users will appreciate the ease of selecting feed and thread pitches electronically without the need for gear changes. The Servoturn boasts a heavy ribbed machine bed and high-quality servo drives, allowing for a stable and dynamic operation. With a turning diameter over the bed of 500 mm and a center width of 1,950 mm, it accommodates various machining tasks. Standard equipment includes a quick-change tool holder set, an electronic hand-wheel system, and a coolant system, further enhancing its versatility. If you’re ready to upgrade to a robust and precise machine, you can request a quote for the Servoturn 500/2000 in the Servo-conventional Lathes category today. Hfodpsl Iy Sxjfx Ahvsd

Condition: used, Technical details: plate width: 800 mm coil weight: 12 t sheet width - max.: 800 mm sheet width - min.: 300 mm thickness of strip/band: max. 5,0 mm band speed: 4,5 / 25 m/min work height max.: 1700 mm Payload: 12,0 to (Coil) Weight approx.: 7,3 + 6,62 t dimensions of coil: 3,2 x 1,9 x 2,7 m Hjdpfx Aheu Ic Avovefd dimension machine xH: 2,5 x 2,6 x 2,45 m Decoiler with loading device Can optionally be sold together with stock no. 0100571. straightening unit: Infeed rollers: 2 x Ø 144 x 850mm Straightening rolls: 3 x bottom rolls, rigid, Ø 100 x 850mm, 30mm adjustable 3 x top rollers, Ø 110 x 850mm; 30 mm adjustable Coil unwinding machine: Outer Ø 1.500mm Strip width max. 800mm Load capacity max. 12 to Clamping Ø 470 - 630 / 570 - 730mm Transport unit LxWxH: 1700 x 1500 x 1000mm; crosswise running, with prism support 1000 x1000mm Machine will be offered and sold with Stock no. 0100521 as a decoiling and streightening line. *

Condition: excellent (used), Year of construction: 2019, We now have 13 SSI Schaefer SLL LogiMat Vertical Lift Modules from 2019 available for sale. These machines are in very good condition and have been serviced every year by the manufacturer since they were installed. Thanks to this regular maintenance and careful use, the machines are still very reliable. These Vertical Lift Modules are designed to provide maximum storage in a small space. Tray size: 4.025 mm wide × 815 mm deep Tray area: About 3.3 m² Number of trays per machine: Around 49 Total storage area per machine: About 160 m² Floor space used per machine: Only 14.12 m² Each machine includes an optional light pointer, which shows exactly where to pick items. This helps make order picking faster and safer. To use the light pointer, the machine must be connected to an ERP or WMS system. The machines have only run about 30,000 to 60,000 cycles each – about 1 to 2 years of normal use. The height of the machines is 8,200 mm, but they can be adjusted to fit your warehouse ceiling during installation. Specifications – SSI Schaefer LogiMat SLL Vertical Lift Module Manufacturer: SSI Schaefer Model: LogiMat SLL 4025-815-8200/400 Year of Manufacture: 2019 Condition: Very good - serviced annually by the manufacturer Number of Units Available: 13 Height: 8,200 mm Width (Machine / Tray): 4.570 mm / 4.025 mm Depth (Machine / Tray): 3.092 mm / 815 mm Hfodewi Iywepfx Ahvod Floor Space Used per Unit: 14.12 m² Number of Trays per Unit: Approx. 49

Condition: good (used), Year of construction: 2009, functionality: fully functional, number of straightening rollers: 7, coil weight: 4,000 kg, coil outer diameter: 1,500 mm, number of feed rollers: 2, straightening roller diameter: 80 mm, coil width: 600 mm, 1. Decoiler Type: MS 4000 Coil weight: max. 4.000 kg Strip width: max. 600 mm Outer diameter: max. 1.500 mm Inner diameter: 475 – 535 mm Execution: • Hydraulic expansion • Hydraulic pressure arm from top with hydraulic driven roll Rolle • Lateral swivel in roll on front side, disc at back side and additional 3 pc. single arms for coil keeping • Mandrel driven by electric motor, control by light sensor • Decoiler moveable for loading by hydraulic • Coil loading table 2. Straightening maschine Hodpfx Asq A Tw Rshvsfd Type: MR 58 Strip width: max. 600mm Stock thickness: 0,8 – 3,6 mm at rigidity 400 N/mm2 Straightening rolls: 7 pc., supported Pulling rolls: 2 pc. Diameter of rolls: 80 mm Speed: 5 – 30 m/min Execution: • Hardened and ground rollers • Pneumatically lifted feed roller • Straightening rollers adjustable as a block • Lateral strip guiding at infeed, manually adjustable via hand crank • Hydraulic strip insertion aid (support table, extendable tongue and pressure roller from above) • Straightening head can be opened (alligator mouth) • Ultrasonic sensor for loop control • Swivel control panel • Siemens S7-200 control system

Condition: good (used), Year of construction: 2015, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: TEK05/2015, type of input current: three-phase, sheet thickness steel (max.): 1 mm, sheet thickness (max.): 1 mm, total width: 840 mm, total length: 15,000 mm, total height: 153 mm, feed length X-axis: 46,000 mm, feed length Y-axis: 2,000 mm, input voltage: 380 V, working width: 2,000 mm, infeed width: 1,500 mm, control cabinet length: 1,500 mm, control cabinet height: 1,000 mm, control cabinet width: 800 mm, feed rate X-axis: 700 m/min, workpiece weight (max.): 163 kg, product height (max.): 1 mm, input current: 380 A, power: 150 kW (203.94 HP), coil weight: 10,000 kg, HIGH GROOVE SHEET PROFILING LINE (Corrugated Metal Sheet ribs 53/85/135/153 mm) Profile Type: H53 mm / H83 mm / H135 mm / H153 mm Sheet Metal Profile Thickness: 0.75 mm - 1.25 mm Minimum - Maximum Profile Length: 1500 mm - 15000 mm Manufacturer: TEK MAK Year of Construction: 2015 Condition: Very good condition for rolls for profiling 53, 85, 135, and good condition for rolls for profiling the 153 mm rib. Components of the Line: Hydraulic Uncoiler, 10-ton capacity Profile Forming Machine Mobile Guillotine Stacking Table Hfjdpsuannxsfx Ahvjd Control and Command Panels

Condition: used, Year of construction: 2022, operating hours: 1 h, Equipment: all wheel drive, had accident, Internal Vehicle No.: G300144 German vehicle More INFO from Luis Lucena (German, English, Spanish, French) Electric drive Machine damaged Errors excepted We are happy to accept your used vehicle in part exchange. Financing available directly through us. GOLEC NUTZFAHRZEUGE GMBH Hfodpfxewz Au To Ahvjd We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.