Condition: used, Year of construction: 2006, power: 25 kW (33.99 HP), cutting height (max.): 110 mm, cutting width (max.): 4,300 mm, cutting length (max.): 4,300 mm, TECHNICAL DETAILS Max. panel width: 4,300 mm Max. panel length: 4,300 mm Min. cutting height: 3 mm Max. cutting height: 110 mm Max. saw blade overhang: 125 mm Feed and Grippers Number of grippers: 9 Number of grippers on the sliding stop: 9 Max. feed rate: 80 m/min Max. feed rate of the saw carriage: 120 m/min Saw Carriage Max. tool diameter: 450 mm Motor power: 18 kW Speed: 2,870 rpm Scoring Unit Design: Postforming scoring unit Max. tool diameter: 340 mm Motor power: 2.2 kW Speed: 2,880 rpm MACHINE DETAILS Control system: Windows XP Machine programming software: CADMATIC 3 Total connected power: 25 kW EQUIPMENT CE marking 4 front support tables 9 grippers on the sliding stop Postforming scoring unit Hsdpezmtn Sjfx Aaisnr The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8206

Condition: used, Year of construction: 2008, power: 36 kW (48.95 HP), cutting height (max.): 105 mm, cutting width (max.): 4,400 mm, cutting length (max.): 2,200 mm, Equipment: scorer, TECHNICAL DETAILS Max. panel width: 4,400 mm Max. panel length: 2,200 mm Max. cutting height: 105 mm Thin panel feed: Yes Post-forming process: Yes Gripper system Number of grippers: 10 Flexible, NC-positionable grippers: Yes Grippers on the sliding stop: Yes Sawing unit Main saw blade overhang: 120 mm Max. saw blade overhang: 120 mm Max. tool diameter, main saw: 450 mm Scoring unit: Yes Post-forming scoring unit: Yes Max. tool diameter, scoring saw: 300 mm Max. feed rate: 130 m/min MACHINE DETAILS Control system: Windows Machine programming software: OSI Hnodezmtnxepfx Aaior Total connected load: 36 kW EQUIPMENT CE marking Tilting table with 4 tables Saw carriage 1 Barcode label printer Zebra S4M The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8409

Condition: used, Year of construction: 2010, power: 30 kW (40.79 HP), cutting width (max.): 3,800 mm, controller model: POWERCONTROL, cutting length (max.): 2,200 mm, Equipment: scorer, TECHNICAL DETAILS Max. panel width: 3,800 mm Max. panel length: 2,200 mm Min. cutting height: 6 mm Max. saw blade overhang: 130 mm Number of tables: 3 Number of grippers: 7 Gripper arrangement: On the sliding stop Max. feed rate: 90 m/min Sawing unit Number of saw carriages: 1 Positioning: NC-controlled Max. tool diameter: 480 mm Motor power: 18 kW Scoring unit Positioning: NC-controlled Max. tool diameter: 200 mm Motor power: 2.2 kW MACHINE DETAILS Control system: POWERCONTROL Machine programming software: CADMATIC 4 Total connected load: 30 kW Hjdpfxezmtnlo Aaijnr EQUIPMENT CE marking Barcode label printer The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7875

Condition: used, Year of construction: 2004, saw blade diameter: 180 mm, tool diameter: 450 mm, Equipment: scorer, TECHNICAL DETAILS Sawing carriage Max. saw blade overhang: 125 mm Number of grippers: 11 Hjdpfx Ajzmtm Uoaienr Max. feed rate: 80 m/min Max. tool diameter: 450 mm Motor power: 21 kW Scoring saw Max. saw blade diameter: 180 mm Motor power: 2.2 kW Max. feed rate: 150 m/min EQUIPMENT Lifting table Scoring unit Barcode label printer The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 6645

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, used horizontal panel dividing saw Manufacturer: HolzHer Hjdpfjzu Aklox Aaionr Type: CUT 6120 Year of manufacture: 2015 Cutting length 4200 mm Cutting width (program slider travel) 3100 mm Cutting height 80 mm Angle stop on the left Roller track, 7 pieces Clamps, 8 pieces, opening 82 mm, the first one with a double finger Air cushion tables, 4 pieces Central blower, 1 piece Technical data: Saw blade overhang 85 mm Automatic cutting height adjustment; pressure bar height control Angle fence, min. pressing width 0 mm; max. pressing width 1300 mm Motorized groove cutting device from 0-35 mm Main saw motor 11 kW, main saw 350 rpm Scoring saw motor 1.5 kW, saw 180 mm rpm Software: Opticut, 17″ TFT display Operating voltage 400 V (+10%/-5%) / 50 Hz Electrical connection: 20 kW Total weight: 6200 kg Control system Labeling package incl. label printer Opti-Cut software installed

Condition: used, used dividing system used dividing system consisting of: infeed system Manufacturer: Systraplan Year of manufacture: 1989 Technical data - Siemens S5 control system - Portal infeed system with suction crossbeam - 1 stacking station - 2 stacking stations for collecting protective sheets - Buffer roller conveyor before the infeed system - 1 additional buffer station Dividing saw Manufacturer: Anthon Type: LNB-LNB150 63/33 22 Year of manufacture: 1994 Technical data - Siemens S5 control system - Package height: max. 150 mm - Saw carriage with scoring saw and main saw Paternoster with 2 levels Type: MRB-HUBKORB-EHK-3 Technical data - For collecting identical packs of strips for optimal utilization of the cross-cut saw Destacking Liftomat Hodezuzigepfx Aaionr Manufacturer: Holzma Type: HAU A 25/8, HAU B 25/8, HAU A 25/12, HAU B 25/12 Year of manufacture: 2004 Technical data - 4 storage spaces with roller conveyor lifting station (Liftomat) - Pit required - Buffer roller conveyor after destacking Waste disposal system consisting of a cut-off machine and a shredder Cut-off machine Manufacturer: Holzma Type: Cut-off machine Year of manufacture: 1996 Shredder Manufacturer: Masur Type: LZ 800 Year of manufacture: 2003 Technical data - Cut-off machine for longitudinal sections - Conveyor belts and consolidation of longitudinal and cross-cut sections - Horizontal shredder Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2019, Format circular saw Manufacturer: SCM Type: Class Si 400EB Year of manufacture: 2019 Technical data Maximum cutting height at 90 degrees: 140 mm (with 400 mm main saw blade) Maximum cutting height at 45 degrees: 97 mm (with 400 mm main saw blade) Main saw blade: 400 mm Scoring saw blade: 120 mm Swivel range of main saw blade: 0 - 45 degrees Speed of main saw blade: 3,000 / 4,000 / 5,000 rpm Speed of scoring saw blade: 8,500 rpm Power of main motor: 7 kW (9.5 hp) Power of scoring motor: 1.3 kW (1.7 hp) Sliding table: 3,200 x 320 mm Alternative table length: 3,800 x 320 mm Cutting width with parallel fence: 1,270 mm Dust extraction connection, safety guard: 120 mm Dust extraction connection, machine body: 100 mm Design: EASY 3 UP PLUS CE Control panel: Swiveling control panel in suspended design Control system: EASY2 control system with 7" widescreen monitor Programming of cutting height: Electronic setting and display Programming of blade tilt: Electronic setting and display Parallel fence: Electronically programmable Hjdezuy Rpjpfx Aaisnr Operator assistance: Supporting functions for complex cutting tasks Tool data management: Storage of saw blade data Program memory: Up to 300 programs Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2019, Panel saw Manufacturer: Holzmann Model: K5-320VFP-2000 Hodjzuy Riepfx Aaionr Year of manufacture: 2019 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 2022, Panel saw Manufacturer: Felder Type: K 945S Year of manufacture: 2022 Technical data - Manual saw blade angle adjustment with angle indicator and handwheel - Parallel fence with round guide rail, D = 50 mm - Rip fence 2600 mm with mounting system for extension table 1300/1500 - Machine stand for K 945 S, saw blade table made of cast iron, including operating tools - Main saw motor 5.5 kW (7.5 HP), 3x400 V - PCS (Preventive Contact System) safety system - detects the approach of body parts Hedpezuy Rcjfx Aaienr - Tilting saw unit 90 - 45 degrees - Saw blade diameter range: 250-450 mm - Maximum cutting height: 155 mm - Electric height adjustment - Maximum cutting width: 1250 mm - Protective cover for 1250 mm cutting width with dust extraction connection (100 mm) - Sliding table, cutting length 2800 mm, anodized aluminum - Transport packaging for sliding table - Standard pallet 2100 x 1500 x 1500 mm - Extension table for cutting lengths 2500-3200 mm - Support surface: 1150 x 640 mm - Crosscut fence 3200 mm with 2 folding stops - 3 speed stages: 3500/4500/5500 rpm - Antistatic belt for PCS system Mobile dust extractor AF 22 - Power: 3.0 kW - 3 x 400 V, 50/60 Hz - Standard dust filter - Connection nozzle: 120 mm and 80 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2018, Panel dividing saw Hnodezuy N Sspfx Aaisr Manufacturer: Homag Type: Profi HPP300/43/43 Year of manufacture: 2018 Technical data Cutting length: 4,300 mm Cutting width (programmable sliding table): approx. 4,250 mm Max. feed rate of the saw carriage: 130 m/min Optional saw carriage feed rate up to 150 m/min Saw blade projection: 80 mm (optional 95 mm) Max. saw blade diameter: 350 mm Main saw motor: 11 kW Scoring saw, motor-adjustable Clamping jaws: 7 pieces (2-finger design) Control system: CADMATIC 4.1 / 4.5 or powerTouch Total connected load: approx. 18.4 kW Compressed air: 6 bar CE marking Package thickness up to approx. 80 mm (standard) Max. saw blade: 350 mm Main saw blade: 350-380 mm, depending on configuration Scoring saw motor: 1.5-2.2 kW Extraction capacity: approx. 3,350-5,230 m³/h Processing: Single sheets and package cuts Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, Panel dividing saw Manufacturer: Holzma Type: HPP 350/43/38 Year of manufacture: 2008 Technical data - Control system: CADmatic 4 - Optimization program: CAD-Plan 4 - Saw blade overhang: 80 mm - Saw carriage feed rate forward/backward: 1-150 m/min / 150 m/min - Feed rate of the program cut forward/backward: 90 m/min / 90 m/min - Main saw motor: 13.5 kW - Scoring saw motor: 2.2 kW - Working height: 920 mm - Main saw blade: 350 x 4.4 x 60 mm - Scoring saw blade: 180 x 4.4 - 5.4 x 45 mm - Cutting length: 4300 mm - Cutting width: 3700 mm - Label printer Pica 108 - Processing package for gypsum fiberboards - Annual maintenance and inspection by Homag - New PC in 2021 (Win10) and updated machine control software and CadLink Note: Hedpfxezuy N Eo Aaienr The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2007, Panel saw Manufacturer: Altendorf Type: F45 Year of manufacture: 2007 Technical data Cutting length: 3000 mm Saw blade diameter, max.: 500 mm Main saw: 5.5 kW Hodpfx Aezuy Nxjaisnr Scoring saw: 0.75 kW Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1991, Strip cutting system Strip cutting system consisting of: Alphamatic vacuum loading system with 4 roller conveyors Feed system to the crosscut saw Crosscut saw with vacuum workpiece clamping Further transport to the ripsaw Hnodpfx Ajzuy Nrjaisr Ripsaw Manufacturer: Holzma Type: HPP81-3200 Year of manufacture: 1991 Technical data - Modified in 2019 Extraction conveyor belt Longitudinal roller conveyor with longitudinal measuring system Automatic labeling system REA JET Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2007, Panel dividing saw Manufacturer: HolzHer Type: 6310 CUT 110 Hnjdpfxozuy Nlj Aaior Year of manufacture: 2007 Technical data - Cutting length: 4250 mm - Cutting width: 5250 mm / reduced by 2550 mm to 2700 mm - Display on the right - Cut Control control system with touch screen operation - Angle pressing device on the right - Saw carriage with main/scoring saw control - Power: 18.5 kW / 2.2 kW - Manual adjustment of scoring saws in width and height - Grooving device with 2 groove height settings (groove depth adjustable from 2-12 mm, up to max. 9-19 mm) - Label printer TLP2742 - Cut-out device - Additional blowing device on the saw carriage - 3 additional support tables, 2400 mm, with drive system - Control cabinet on the machine side including speed monitoring with safety shutdown - Postforming unit including scoring unit - Automatic central lubrication - Closed pressure beam - Film cutting device Optional, at an extra charge: Extraction system Manufacturer: AL-KO Type: POWER UNIT 300P Year of manufacture: 2011 Technical data - V = 5089 m³/h - Vacuum: 2050 pA - Motor power: 7.5 kW - Suction nozzle 300 mm - 3 collection containers, 250 l each - Integrated extinguishing system Note: The technical data and descriptions are copies of the original order confirmation. The information is for informational purposes only and is not binding.

Condition: used, Year of construction: 2001, - Cutting length: 5800 mm - Cutting width: 2 x 2200 mm - Max. cutting height: 100 mm Panel dividing and solid wood saw Manufacturer: PANHANS Type: EURO 32 Year of manufacture: 2001 Dimensions: - Cutting length: 5800 mm - Cutting width: 2 x 2200 mm - Max. cutting height: 100 mm Machine attachments: - Roller table at the rear: 3982 mm - Support beam at the rear: 9 pieces, 40 x 4056 mm - Air cushion table at the front: 2 pieces, 600 x 1800 mm, adjustable Air cushion table at the front for miter cutting device: 1 piece, 600 x 1400 mm - Air cushion miter table: 600 x 1800 mm, left - Miter ruler: up to 2060 mm - Clamps: 9 pieces, adjustable Hsdozuy Egepfx Aaienr - Stop jaws: 2 pieces, adjustable - Side pressure: 65-1365 mm, stepless Special accessories: automatic miter cutting device - Special version: hydraulic lifting table with roller conveyor, infeed roller conveyor, 4 length edgers, 4 panel extractors Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1994, - Cutting length: 5800 mm - Cutting width: 5150 mm - Main saw power: 11 kW Hedpfezuy D Asx Aaisnr - Scoring saw power: 1.5 kW Panel dividing saw Manufacturer: Panhans Type: 693 / EURO 30 Year of manufacture: 1994 Technical data: - Cutting length: 5800 mm - Cutting width: 5150 mm - Main saw power: 11 kW - Scoring saw power: 1.5 kW - Rear support table (divided): 1 piece, 370 x 4910 - Rear support beams (with rollers): 9 pieces, 40 x 4910 mm - Front sliding support table (with 3 infeed rollers on the end): 3 pieces, 600 x 1800 - Miter table: adjustable - Air cushion miter table: adjustable - Angle table: left - Air cushion table left: up to 2020 mm - Clamping jaws: 7 pieces, floating Scoring jaws: 4 pieces Special accessories: Color screen, graphics, online I Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, Vertical panel dividing saw Manufacturer: Felder Format4 Type: Kappa V80 Hjdpfx Aaszuy Dvoisnr Year of manufacture: 2021 Technical data Saw unit Motor with 5.5 kW power Saw blade diameter: 300 mm Cutting depth: 80 mm Cutting length: 5300 mm Cutting height: 2200 mm Maximum horizontal cut: 2080 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2019, - Cutting length: 4300 mm - Cutting width: 4300 mm - Main motor: 9 kW Panel dividing saw Manufacturer: Otto Meyer Type: PS80P Year of manufacture: 2019 Technical data - Cutting length: 4300 mm - Cutting width: 4300 mm - Main motor: 9 kW - Optimized feed speeds of the main saw thanks to an additional frequency converter Hnodozuy Dpjpfx Aaisr - Label printer - Automatic electronic clamp detection for recognizing the panel corners Note: The technical data and descriptions are a verbatim copy of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2005, - Saw motor: up to 19 kW at 2930 rpm, 50 Hz - Scoring motor: 1.5 kW at 2830 rpm, 50 Hz Panel dividing saw Manufacturer: Schelling Type: FM-H 430 Year of manufacture: 2005 Technical data Infeed speed: Forward: 0-25 m/min Reverse: 80 m/min Saw feed speed: Forward: up to 120 m/min Reverse: 120 m/min Saw motor: up to 19 kW at 2930 rpm, 50 Hz Scoring motor: 1.5 kW at 2830 rpm, 50 Hz Clamping opening: 113 mm Cutting straightness: +/- 0.1 mm over a cutting length of 3 m Dimensional accuracy: +/- 0.2 mm length, +/- 0.2 mm width, +/- 0.3 mm diagonal Main saw blade: Diameter: 450 mm Inner bore diameter: 30 mm Saw blade thickness: 4.4 mm Number of teeth: 72 Scoring blade: Diameter: 200 mm Inner bore diameter: 20 mm Saw blade thickness: 4.2 / 3.5 mm Number of teeth: 36 Edge scoring blade: Diameter: 220 mm Inner bore diameter: 20 mm Saw blade thickness: 4 / 4.8 mm Number of teeth: 2 x 24 Hsdpfx Aezuy Dijaienr Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2000, - Cutting length: 3300 mm - Saw blade overhang: 125 mm - Main saw: 18 kW - Scoring saw: 2.2 kW Panel dividing saw Manufacturer: Holzma Type: HPL 23/X/33/22/30/L Year of manufacture: 2000 Technical specifications - Cutting length: 3300 mm - 3 air cushion tables - Lifting table: 3300 x 2200 mm - Saw blade overhang: 125 mm - Main saw: 18 kW - Scoring saw: 2.2 kW - CADMATIC control system - CADMATIC control system Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding. Hodpjzuy A Sjfx Aaisnr

Condition: used, Year of construction: 2021, - Cutting width: 1250 mm - Cutting length: 2800 mm Panel saw Manufacturer: Felder Format4 Type: Kappa 550 Year of manufacture: 2021 Technical data - Saw blade: 250 - 550 mm - Cutting height: 202 mm (90°), 140 mm (45°) - 3 speeds: 3000/4000/5000 RPM - Cutting width: 1250 mm - Cutting length: 2800 mm - Control system: Kappa 550 e-motion - Surface area of the extension table: 1250 x 650 mm - Telescopic fence allows for crosscuts up to 3200 mm - The crosscut fence can be swivelled from 90° to 45° - Circular saw extension of 1200 mm behind the saw blade axis - The positioning of the parallel fence is done electronically via a ball screw integrated dust-free into the circular saw table Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding. Hedjzuy A Espfx Aaijnr

Condition: used, Year of construction: 2022, Circular saw complex Manufacturer: WoodVER Type: UPK-1 Year of manufacture: 2022 Technical data Maximum diameter of the log being processed: 1000 mm Length of the log being processed: 2.0 - 6.5 m Saw diameter: 550 mm Saw rotation speed: 1500 (3000) RPM Power of the main motors: 2 x 18.5 kW Productivity: 12 - 20 m3 / shift - Automatic feed of the carriage with adjustable travel speed - Digital ammeter integrated into the control panel - Three-part frame with two guides for perfect geometry Hnjdpozuy Axefx Aaier - Remote control with CNC system - Three-stage soft start system - Laser pointer for cutting lines - Digital cameras with an 18.5-inch display, installed in the remote control - Four hydraulic side clamps, four end clamps - Hydraulic log tilting device that performs the function of log tilting and simultaneously serves as the log centering device on the frame. - Scraper conveyor Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2012, - Cutting width 2200 mm Hjdpfxozuy Arj Aaisnr - Equipped with an IR pre-heating zone and cooling unit Film cutter Manufacturer: HSM Maschinentechnik Type: ABW - ROTA - 2200 Year of manufacture: 2012 Technical data - Cutting width 2200 mm - Equipped with an IR pre-heating zone and cooling unit - Front: semi-automatic roll change - Rear: individual sheets are automatically stacked on a pallet Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2011, Cross-cut and rip saw Manufacturer: HOLZMA Type: HQP 11/16/56/LX Year of manufacture: 2011 Technical data - Combined saw unit with cross-cut saw unit, cutting length 1,600 mm, and rip saw, cutting length 5,600 mm - additional pressure cylinder - postforming unit - waste flap 1600 mm - clamping device for cross-cut saw, 2-finger - automatic ejector guide - roller conveyor designed for 1,300 mm width - second drive in the roller conveyor - 1 m shaking chute 550 mm (driven) - mobile CADMATIC control panel Hnodpfx Aaezuyzzjier - cooling unit for individual saw - with vacuum loading system and outfeed table Note: The technical data and descriptions are a copy of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1999, - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) Panel dividing saw with infeed table and destacking device Manufacturer: Giben Type: Prismatic 2 h100 SPT Year of manufacture: 1999 Technical data - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Clamping chuck opening: 117 mm - Working height: 950 mm - Lifting table dimensions: 1600 x 2700 mm - Max. stack height: 620 mm - Dimensions: 2444 x 1220 mm, 2500 x 1250 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) High-speed saw carriage - 2 guide shafts: 40 mm - Saw carriage drive via frequency-controlled motor Hnodpfxjzuyywj Aaior - Feed speed: 1 - 100 m/min - Return speed: 100 m/min Adjustment of the saw carriage speed from the control panel. Automatic cutting length control according to the panel dimensions - Scoring saw speed: 5035 rpm - Carbide-tipped saw blade speed: 3760 rpm - Main saw motor power: 11 kW - Scoring saw motor power: 2.2 kW - Main saw blade: 400 mm - Main saw spindle: 75 mm - Scoring saw blade: 215 mm - Scoring saw adjustment from the outside in stepped increments to: 0.025 mm - Changing the main saw and the scoring saw via a quick-release system (pneumatic) Sliding table - Support table in the sliding table area with free-running roller rails - Top-mounted sliding table with 3 floating clamping chucks with patented, foldable lower clamping chuck fingers - Sliding table drive via servomotor - Drive torque: 6.5 Nm - Feed speed: 1 - 60 m/min - Return speed: 60 m/min - Cable routing via drag chain - 2 front aligners Automatic infeed via lifting table - Dimensions: 1600 x 2700 mm - 4-column spindle lifting table with 12 free-running roller groups - Automatic package height counting when lifting the panels via control - Min. panel dimensions: 2000 x 1200 mm - Max. stack height without pit: 620 mm - Max. load: 12 t - Infeed height: 330 mm Support table - 2 pcs support table with PVC surface 2000 x 510 mm Machine control G-Drive 1D Extraction - 1 extraction port on the pressure bar: 115 mm - 1 extraction port on the lower side of the machine bed: 200 mm - The chip extraction takes place directly at the saw unit via sheet metal ducts into a chip duct arranged along the saw line, which is sealed with flexible rubber lips. Performance parameters - Average cycle time/saw cut: approx. 25 s Quality - Cutting accuracy: +/- 0.15 mm is guaranteed (for straight panels) - Angularity: +/- 0.15 mm/m Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.