Condition: used, Year of construction: 1991, pressure 20 t distance between columns 400 mm stroke 250 mm total power requirement 5,5 kW weight of the machine ca. 4 t dimensions of the machine ca. 3 * 1,5 * 2,4 m Dolsvwgwxsqvx Taeut

Condition: like new (used), Year of construction: 1989, operating hours: 810 h, Functionality: fully functional, machine/vehicle number: 892161, total height: 2,860 mm, sheet thickness (max.): 6 mm, total width: 2,425 mm, overall weight: 9,000 kg, ram adjustment: 61 mm, pressing force: 160 t, Here you have the unique opportunity to buy a Feintool GKP F 160 that has hardly been used. Feintool GKP F 160. The machine has just 810 hours. As you can see from the pictures, the machine is in top condition. Dslqvx Tsumigqeaout We purchased the press in 2019 but, like its predecessor, never used it. It was tested by us without tools and the machine works. Technical data of the FEINTOOL GKP F 160 fine blanking press Maximum sheet thickness: 6 mm Maximum sheet width: 210 mm Total force including auxiliary functions: 160 t Shearing force: 100 t Hydraulic counterweight force (upper table): 1-40 t Hydraulic force of the ring jaw (lower table): 12-50 t Ejector force (pump pressure): 4-8 t Hydraulic shearing force: 7.5 t Pneumatic shear force: 6.6 t Stroke of the pusher: 61 mm Maximum number of pusher strokes: 72/min Minimum number of pusher strokes: 18/min Motor power: 11 kW Pump power: 4 kW Air connection: 6 bar Dimensions (L x W x H): 2380 x 1870 x 2860 mm Weight of the GKP F 160 machine: 9000 kg

Condition: good (used), Year of construction: 1988, machine/vehicle number: 222 056 A110, Müller Weingarten CE 40.25.4 Press -WAG 850 The machine is tested according to VDE until 23.09.2026. Manufacturer: Müller Weingarten Operating voltage: 380 V Control voltage: 220 V Direct voltage: 24 V Rated current of the machine: 25 A Per/s: 50 Delivered: 1988 Overtravel: 9 mm Dolqvjqrqz Aox Taout Overtravel time: 80 ms Safety distance: 128 mm

Condition: excellent (used), table height: 580 mm, table width: 900 mm, overall weight: 5,600 kg, pressing force: 80 t, Power 80 Tn Nominal speed 65 strokes / min Duolqvx Tsv A S Utjaot Variable speed 34 - 85 strokes / min Stroke 14-150 mm Distance sliding table 480 mm Work table 580 x 900 mm Sliding surface 380 x 560 mm Weight 5,600 Kg Measurements (width x length x height) 1610 x 1540 x 2930

Condition: used, Year of construction: 1999, connected load frequency 220 V rated current 263/152 Duslqvevvx E Sex Tast 01516 81 663 694 weight of the machine ca. 1 t

Condition: used, Year of construction: 1991, pressure 60 t throat 280 mm stroke 1 mm ram adjustment 60 mm no. of strokes 110 Hub/min table surface area 740 x 550 mm clamping plate 740 x 555 mm ram surface 380 x 200 mm daylight, max. stroke above - ram adjustment above 360 mm total power requirement 5,5 kW weight of the machine ca. 3,850 t dimensions of the machine ca. B 1,1 x T 1,6 x H 2,3 m - fixed table - clamping plate Dujlqvx Tev Az T Sjaot - hydraulic clutch Ortlinghaus with additional brake - manual central lubrication

Condition: used, Year of construction: 1994, Pressure total: 320 ton Ram stroke: 460 mm Slide adjustment: 360 mm Shut height (stroke down, adjustment up): 1310 mm Free frontal opening L-R: 2750 mm Table surface area : 2700 x 1525 mm Dujlqvxevvntfs Taot Slide area: 2700 x 1525 mm Die cushion capacity in table: 60 ton Die cushion stroke: 220 mm Number of strokes: 15 s.p.m. Required power: 75 kW Weight of machine approx.: 80 ton

Condition: good (used), Year of construction: 2005, used bending press, Graebener brand, type GRNM, year of manufacture 2005 Dujlqvx Tovvllljaot max. bending force 16 t. tool length 1,600 mm adjustment of the lower swing arm, hydraulic 2 cylinders dimensions 5080 x 3290 x 2540 mm weight 65 t.

Condition: excellent (used), Year of construction: 1975, -KOM 1002-

 Offered here is a press of the company HYDRAP of the type HKPS8000. Technical data: Duelqog Ufvbjvx Taet Type: HKPS8000
 Year of manufacture: 1975
 effective stroke: 200mm throat: 250mm (at center) table size: 320x320mm Installation height: approx. 345mm Voltage: 380V 
Perm. load: 80000N
 Drive type: HYDR Drive power: 1,5kW Oil quantity: 60l Oil viscosity: 3°E

Condition: good (used), Year of construction: 1988, Šmeral Trnava Metal Lepa 63 PA Category: Metal Brand: Šmeral Trnava Delqvx Tjvvh U Aeajut Model: Lepa 63 PA Year of manufacturing: 1988 Under power: Yes 630 kN --- ---

Condition: used, Year of construction: 1970, ja weight of the machine ca. 9,5 t serial number 10457/2 160000 KG stroke of worktool slide 41 Hub/min +++++ Please note: Duelqovvx Exevx Taet The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: like new (used), Year of construction: 2024, Capacity: 2.500 kN Specification: Threshold setting: Reading begins at 1% of capacity (75 kN) Resolution: 10 kN Inaccuracy: +/-0.5 % of Full Scale (F.S.) Non-linearity: +/-0.3% F.S. Non-repeatability: +/-0.l% F.S. Temperature Range: 0° C. to 70° C Temperature Effect on F.S. output: +/-0.001% F.S./DEG. F. on no-load output: No effect (has auto- zero balance circuit) Overload: 150% of capacity (3.750 kN) Sampling rate: Three measurements per second Operation mode: Peak or Track Strokes per minute: Single stroke device, automatic reset on each stroke Power: Standard 9V alkaline battery Dujlofpwmpsqvx Taot Approx. 30 hours of continuous use Has low battery indicator Tons Display: 3 1/2 digit LED (0.56" high) Dimensions: app. 185 L x 200 W mm, height app. 127mm Height sets to 5.0000" +/- 0.0005" Weight: app. 13 kg inckuding carrying box

Condition: used, -WT 109- Dujlqvslf Ez Tox Taot Offered here is a press. The press is operated manually via the hand wheel. Technical data: Stroke: 52cm

Year of construction: 1987, Condition: good (used), Max. tool load: 2.000kg Tool size: Width: max. 800mm Length: max. 1.160mm Duslqvecwr Iusx Tast Table over floor: 900 - 1.300mm, hydraulic adjustable Performance: - Table 360° rotatable - 4 pc. roller conveyor - rotatable stopper at conveyors - hydraulic lifting

Condition: reconditioned (used), Year of construction: 1983, Power: 2.000 kN Dslogpxc Seqvx Taout Frequency: 60 rpm Stroke, adjustable: 20 - 120 mm Daylight: 450mm (max. stroke up) Ram adjustement: 100mm Size of bolster: 850 x 810mm Opening in bolster: 00 x 50mm Ram area: 750 x 810mm Motor power: 22 kW equipped by: - 1pc. con rod - 6pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - manuel stroke adjustment - pneumatic ram balancing cylinder - anti vibration machine feet

Condition: good (used), Pressing force: approx. 10 tons Table size: 500 x 300 mm (W x D) Pedal size: 110 x 105 mm (W x D) Installation height: approx. 150 mm (large stroke at the top) Stroke: 5...29 mm Pedal adjustment: 25 mm Djlqevnrhwovx Tasut Other • Rotating wedge coupling • Foot release • Control and protective screen as new, only used very little • Without table

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Dslqspvlf Sovx Taout Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Condition: good (used), Year of construction: 1989, Power: 1.000 kN Size of bolster: 800 x 750 mm Distance betw. columns: 900mm Delqvx Tsd E U Nnoasut Size of ram: 800 x 600mm Daylight: max. 800 mm Stroke: 480 mm Speed: Fast down: 300 mm/s Working: 30 mm/s Fast up: 300 mm/s Electric power total: app. 31 kW Weight: app. 13.000 kg Size of footprint: app. 1,6 x 2,90 x 3,8m (T x B x H) • die cushion, activ, 400kN, stroke 200mm • allowed for 2-hand working • equipped by oil - air chiller • ram guiding by 4 pc. hard chromed Guiding columns

Condition: ready for operation (used), Year of construction: 1980, Power: 300 to Size of bolster: 1.200 x 850 mm Overhang: 400 mm Width of ram: 1.100 mm Opening in bolster: 400 x 250 mm Daylight: 500 mm Dolqvx Tjd A Hbcoajut Frequency: 32 1/min Stroke: 30 - 140 mm Ram adjustment: 105 mm Weight: app. 19.500kg Other - allowed for 2-Hand safe working - euqipped by safety valve Herion Xsz 20 - Motorized grease lubrication - Pneumatic ram balancing cylinders - Motorized ram adjustment - T-slots in ram - Stand alone control panel - bearing of con rod overhault

Condition: good (used), Year of construction: 1986, operating hours: 10,000 h, power: 30 to (US) , app. 270kN Djlonl Snjqvx Taeut bolster area: 30" x 21" = 762 x 533mm ram-area: 800 x 300mm strokes/min: 100...1400 1/min stroke (fixed): 1" = 25,4mm ram adjustement: 1,75" = 44,5mm Equiped by * Hydraulic clutch * Roll feeder Make: Sankyo Type: Variax V70 Width: max. 100mm Only app. 10.000 working hours

Condition: good (used), Press control make Brankamp, Duslqvx Tjbu N N Nsaot was dismounted out of a machine because it got a complete new control. We have not tested it, but it was in operation until disassembling. Could be used as spareparts for the same type.

Condition: as good as new (ex-display), Year of construction: 2024, Capacity: 5.000 kN Specification: Threshold setting: Reading begins at 1% of capacity (50 kN) Resolution: 10 kN Duslqvxsfpwk Rj Taot Inaccuracy: +/-0.5 % of Full Scale (F.S.) Non-linearity: +/-0.3% F.S. Non-repeatability: +/-0.l% F.S. Temperature Range: 0° C. to 70° C Temperature Effect on F.S. output: +/-0.001% F.S./DEG. F. on no-load output: No effect (has auto- zero balance circuit) Overload: 150% of capacity (7.500 kN) Sampling rate: Three measurements per second Operation mode: Peak or Track Strokes per minute: Single stroke device, automatic reset on each stroke Power: Standard 9V alkaline battery Approx. 30 hours of continuous use Has low battery indicator Tons Display: 3 1/2 digit LED (0.56" high) Dimensions: app. 230 L x 190 W mm, height app. 180mm Height sets to 7.0000" +/- 0.0005" Weight: app. 32 kg inckuding carrying box with analog output

Condition: ready for operation (used), Machine has been rebuilt in 1981 and got control for hand working Power: 32 to Size of bolster: 700 x 650 mm Overhang: 340 mm Stroke: 16 - 63 mm Ram adjustment: 10 mm Other Dujlqok S Efhovx Tast can be used for safe 2-Hand working euqipped by safety valve Herion Xsz 20 table can be moved in height Stand alone control panel machine and control assembled on solid steel plate

Condition: good (used), Year of construction: 1984, Power: 800 kN Frequency: 30 - 200 rpm, adjustable by PIV gearing Stroke, adjustable: 20 - 100 mm Daylight: 500mm (max. stroke up) Ram adjustement: 75mm Size of bolster: 1.010 x 800mm Opening in bolster: 700 x 150mm Ram area: 860 x 700mm Motor power: 22 kW equipped by: - 8pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - electro pneumatic stroke adjustment with complete decoiling line make ALBA, consisting of: Decoiler Outer diameter max. 1.400mm equipped by: • Decoiler moveable hydraulic • hydraulic coil loading device • hydraulic drive • hydraulic expansion 480 - 530mm • hydraulic pressure arm, lateral adjustable by handwheel • lateral arms Straightener Type: Ma Ria 9 Width: max. 400mm Thickness: 0,5 - 5,0mm Number of pulling rolls: 2 pc., Ø 120mm, upper can be lifted by hydraulic Dslqvedhzf Isx Taout Number of straightening rolls: 9 pc., Ø 60mm, upper rollls adjustable by hydraulic drive, all rolls supported equipped by: • hydraulic strip insertion device • lateral strip guidings at entrance • lateral strip guidings at exit • basket at exit • loop control by sensor • lateral loop guiding Roll feeder Type: Vhy 400 Width: max. 400mm Thickness: max. 5,0mm passline adjustement by hydraulic jack We can offer even only press or decoiling line

Condition: good (used), Year of construction: 1986, Power: 400kN Size of bolster: 900 x 1.280 mm Size of ram: 900 x 1.2200 mm Duelqvx Tothdbneaet Weight of mold: max. 7.000kg Power main motor: 7,5 kW Stroke: 1.000 mm - With movable bolster - Bolster can be swiveled Weight: app. 7.000kg