Condition: excellent (used), Year of construction: 1965, Functionality: fully functional, pressing force: 315 t, table width: 1,600 mm, table length: 1,100 mm, overall weight: 40,000 kg, ram stroke: 700 mm, working height: 1,300 mm, Equipment: safety light barrier, Press Müller ZE_315_16 315T A press in very good technical condition for sale from a liquidated stamping shop in Poland Dcobev Hp Acs Hhw Rdeg Modernized in 2018. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller ZE_315_16 315T Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2018. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 1990, total height: 34,500 mm, installation height: 800 mm, total width: 12,500 mm, total length: 22,000 mm, throat depth: 800 mm, pressing force: 160 t, table width: 900 mm, table length: 630 mm, operating speed: 200 mm/s, overall weight: 7,000 kg, reverse speed: 125 mm/s, ram plate width: 700 mm, ram plate length: 450 mm, ram stroke: 500 mm, type of input current: three-phase, operating pressure: 160 bar, pressure: 250 bar, oil tank capacity: 500 l, power: 17 kW (23.11 HP), PYE 160 S/1M hydraulic press. Year of production 1990, manufacturer VEB Wema Zeulenroda (Germany). Machine after a general overhaul. Parameters: Maximum pressing force 160 tons. Working pressure 16 MPa. Upper table 700 x 450 mm. Dcjb Hhw Reqy E I Redeg Lower table 900 x 630 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 200 mm/sec. Upward speed 125 mm/sec. Power requirement 17 kW. Oil quantity in the tank 500 l. Weight 7000kg. Height 3450mm, length 2200mm, width 1250mm. Machine in very good condition. It is possible to make a visual inspection and check the machine in motion.

Condition: ready for operation (used), Year of construction: 1973, Available immediately from location: Sagittal Hydraulic Press Brake Type N 110 Year of manufacture 1973 Pressure capacity 110 tons Working length 3050 mm Dob Hswaw Aishw Rdscg Stroke 250 mm Column clearance 2550 mm Drive 7.5 kW Ground floor Weight 7 tons Complete tooling Price: €4,750 plus VAT, ex location

Condition: new, The DCD series offers a versatile deep drawing press solution with a production capacity of up to 400 tons, which can be customized to specific customer requirements. Featuring an ejector roller on the upper table, it optimizes post-deep drawing operations for seamless product processing. The open configuration on three sides facilitates tooling assembly and disassembly, increasing operational efficiency. The C-type press within the series is designed for users working with smaller tools and offers both automatic and manual functions for flexibility and ease of use. Designed with innovation and customer satisfaction in mind, the DCD series meets unique project requirements and offers advanced solutions that improve efficiency, speed, and precision in deep drawing processes. DCD Press Features 9" Screen Linear Front and Rear Covers Auxiliary Cylinder Interior Lighting Non-Through Holes (Optional) Rexroth Hydraulic System Siemens Electrical System Standard Features Chrome-Plated Cylinder Welded Steel Frame HMI Touch Screen Panel Safety Cover and Light Barrier Two-Hand Pushbutton Control Adjustable Variable Pressure and Speeds via the HMI Touch Screen Panel Adjustable Stroke via the HMI Touch Screen Panel Pressure Gauge Contamination Switch Air Cooling T-Slot Table User Manual Optional Features Hydraulic Ejector Cylinder Quick-Change Die Tool Anti-Vibration Pads Rod Pins Dcebjwav N Uj Hhw Rdeg

Condition: good (used), Pressing tool, sheet metal former, forming tool, edging tool, folding tool, bending tool, die, die tool Dcob Hhjv Szbhsw Rdjg -Bending tool: Lower tool for bending machine / press 5 pieces -Length: 2x 300 mm / 1x 275/200/175 mm each -Groove width: 58/52 mm -Angle: 90° -Dimensions: see photos / technical drawing -Price/Delivery: complete -Transport dimensions: 450/300/H115 mm -Weight: 48.3 kg

Condition: excellent (used), Year of construction: 2014, Straightening press, without automation/handling Various spare parts for the machine Control system: Siemens Simatic S7 Straightening force 150 kN Stroke max. 170 mm Workpiece dimensions min. - max. 15 - 45 mm Dcjb Hhwsumhvwe Rdog Workpiece lengths min. - max. 600 - 2100 mm Weight 4500 kg Drives Siemens

Condition: excellent (used), Functionality: fully functional, pressing force: 160 t, table width: 1,000 mm, table length: 1,000 mm, overall weight: 20,000 kg, Equipment: safety light barrier, Press Müller 160 T A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2016. New Simatic S7 control system and new electrical cabinet. Dob Hsv Hpuljhw Rdecg Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Press Müller 160 T A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2016. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: new, The HPK A series is a series of hydraulic presses with a C-shaped design for deep drawing, forming, and notching processes. These machines are manufactured in Europe, and all components and parts meet extremely strict quality requirements. The possible force ranges from 40 to 300 tons. The entire series has large ram plates on the cylinder and work table with clamping flutes for mounting tools and accessories. Mobile 2-hand operation guarantees safety, and the travel distance is defined with adjustable limit switches. We also offer customized solutions that are based on individual customer requirements. Dcob Hhwsvq Nlfo Rdjg

Condition: excellent (used), Year of construction: 1959, Functionality: fully functional, pressing force: 650 t, table width: 1,400 mm, table length: 1,600 mm, overall weight: 90,000 kg, ram stroke: 400 mm, working height: 1,600 mm, Equipment: safety light barrier, Becker & van Hüllen_ 35.11284 3-phase press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Becker & van Hüllen_ 35.11284 3-phase press A press in very good technical condition for sale from a liquidated stamping shop in Poland Deb Hhwov Hpnlj Rdjcg Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: new, The HPK A series is a series of hydraulic presses with a C-shaped design for deep drawing, forming, and notching processes. These machines are manufactured in Europe, and all components and parts meet extremely strict quality requirements. The possible force ranges from 40 to 300 tons. The entire series has large ram plates on the cylinder and work table with clamping flutes for mounting tools and accessories. Mobile 2-hand operation guarantees safety, and the travel distance is defined with adjustable limit switches. We also offer customized solutions that are based on individual customer requirements. Djb Hovq Ni Dshw Rdocg

Condition: excellent (used), Year of construction: 1956, Müller ZE 625 4 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller ZE 625 4 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. Dsb Hhov Hp T Ujw Rdocg New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: new, The HPK A series is a series of hydraulic presses with a C-shaped design for deep drawing, forming, and notching processes. These machines are manufactured in Europe, and all components and parts meet extremely strict quality requirements. The possible force ranges from 40 to 300 tons. The entire series has large ram plates on the cylinder and work table with clamping flutes for mounting tools and accessories. Mobile 2-hand operation guarantees safety, and the travel distance is defined with adjustable limit switches. We also offer customized solutions that are based on individual customer requirements. Dcsbsvn Nm Dj Hhw Rdeg

Condition: excellent (used), Year of construction: 1989, Functionality: fully functional, pressing force: 630 t, table width: 1,800 mm, table length: 1,600 mm, overall weight: 80,000 kg, Equipment: safety light barrier, Siempelkamp FH 4_1_630T press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2024. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Siempelkamp FH 4_1_630T press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2024. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Dcebjv E N Rqs Hhw Rdog Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: new, The HPK A series is a series of hydraulic presses with a C-shaped design for deep drawing, forming, and notching processes. These machines are manufactured in Europe, and all components and parts meet extremely strict quality requirements. The possible force ranges from 40 to 300 tons. The entire series has large ram plates on the cylinder and work table with clamping flutes for mounting tools and accessories. Mobile 2-hand operation guarantees safety, and the travel distance is defined with adjustable limit switches. We also offer customized solutions that are based on individual customer requirements. Dob Hjvq Ni Rehw Rdjcg

Condition: excellent (used), Year of construction: 1962, Functionality: fully functional, pressing force: 200 t, table width: 970 mm, table length: 1,600 mm, ram stroke: 800 mm, die cushion force: 40 t, year of last overhaul: 2022, Equipment: safety light barrier, Lasco FP 222 S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Dcjb Hov E Efdehw Rdjg Lasco FP 222 S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: new, This series of hydraulic workshop presses with motor drive are designed with a stable portal with adjustable, open support table and are suitable for applications such as pressing in and out bearings, for assembly and straightening work or for testing workpieces. The laterally positionable working cylinder facilitates set-up without the workpiece having to be moved. These presses are almost indispensable in technical workshops and maintenance departments. Djb Hhweuzla Do Rdocg

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, pressing force: 200 t, table width: 1,000 mm, table length: 850 mm, overall weight: 17,000 kg, ram stroke: 700 mm, working height: 950 mm, Equipment: safety light barrier, Aprotech PH.200R.01 press A press in very good technical condition for sale from a liquidated stamping shop in Poland Simatic S7 control system Dcobev E Eyhs Hhw Rdeg Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply. Aprotech PH.200R.01 press A press in very good technical condition for sale from a liquidated stamping shop in Poland Simatic S7 control system Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: new, This series of hydraulic workshop presses with motor drive are designed with a stable portal with adjustable, open support table and are suitable for applications such as pressing in and out bearings, for assembly and straightening work or for testing workpieces. The laterally positionable working cylinder facilitates set-up without the workpiece having to be moved. These presses are almost indispensable in technical workshops and maintenance departments. Dceb Hhwouzlaqo Rdeg

Condition: excellent (used), Functionality: fully functional, pressing force: 150 t, table width: 1,000 mm, table length: 850 mm, Equipment: safety light barrier, SMG P 79 press A press in very good technical condition for sale from a liquidated stamping shop in Poland Dceb Hhw Rev E Eppsdsg Modernized in 2016. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. SMG P 79 press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2016. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: new, This series of hydraulic workshop presses with motor drive are designed with a stable portal with adjustable, open support table and are suitable for applications such as pressing in and out bearings, for assembly and straightening work or for testing workpieces. The laterally positionable working cylinder facilitates set-up without the workpiece having to be moved. These presses are almost indispensable in technical workshops and maintenance departments. Deb Hhw Rjuyiigsdscg

Condition: excellent (used), Year of construction: 1959, Functionality: fully functional, table length: 1,500 mm, ram stroke: 450 mm, table width: 2,050 mm, pressing force: 400 t, Weingarten OK 400.21.45 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Dcjb Hhw Rjv E Rm Hjdjg Weingarten OK 400.21.45press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: new, This series of hydraulic workshop presses with motor drive are designed with a stable portal with adjustable, open support table and are suitable for applications such as pressing in and out bearings, for assembly and straightening work or for testing workpieces. The laterally positionable working cylinder facilitates set-up without the workpiece having to be moved. These presses are almost indispensable in technical workshops and maintenance departments. Dcsb Hhwouyh A Ee Rdsg

Condition: excellent (used), Year of construction: 1972, Functionality: fully functional, pressing force: 315 t, table width: 1,250 mm, table length: 900 mm, overall weight: 35,000 kg, ram stroke: 129 mm, Equipment: safety light barrier, Press Müller 21ZE 250315-12,5.13.2 Dceb Hhw Rjv Hqavjdeg A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2018. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller 21ZE 250315-12,5.13.2 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2018. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: as good as new (ex-display), This series of hydraulic workshop presses with motor drive are designed with a stable portal with adjustable, open support table and are suitable for applications such as pressing in and out bearings, for assembly and straightening work or for testing workpieces. The laterally positionable working cylinder facilitates set-up without the workpiece having to be moved. These presses are almost indispensable in technical workshops and maintenance departments. Dsb Hhw Rsuyg Adjdecg

Condition: new, The HPK A series is a series of hydraulic presses with a C-shaped design for deep drawing, forming, and notching processes. These machines are manufactured in Europe, and all components and parts meet extremely strict quality requirements. The possible force ranges from 40 to 300 tons. The entire series has large ram plates on the cylinder and work table with clamping flutes for mounting tools and accessories. Mobile 2-hand operation guarantees safety, and the travel distance is defined with adjustable limit switches. We also offer customized solutions that are based on individual customer requirements. Debjvq Nkhj Hhw Rdecg