Condition: used, Year of construction: 1977, pressure 080 t throat 280 mm stroke 8 - 112 mm no. of strokes 30 - 120 /min Debjvut E Rsvmk H Uecg distance table/ram, max. stroke up, adjustment up 500 mm table surface area 840 x 580 mm hole in the table 150 mm table height over floor 910 mm passage to the back 640 mm ram surface 560 x 300 mm ram adjustment 80 mm power requirement 7,5 kW weight 8,0 t dimensions (WxDxH) 1,6 x 2,3 x 3,3 m permitted for manual put-in according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, hydraulic overload protection in ram, motoric ram adjustment, inclineable, two-hand operation press can be inspected in running condition in our warehouse

Condition: good (used), Functionality: fully functional, tested machine : Power 75 tons Stroke rate 90 strokes throat depth 300 mm ram stroke 16 - 140 mm ram adjustment 80 mm Dobvmk Hewc Ntxe Ujcg with shield , . new UVV-tested .

Condition: good (used), Used workshop press from top brand Enerpac Type: RP 100 Dcobvmkewc Nlus H Usg Capacity: 100 tons

Year of construction: 1990, Condition: used, Erfurt press force 160 tonnes table 120x80 Debvmkswfucdo H Ujcg

Year of construction: 1975, Condition: ready for operation (used), A Weingarten single-column eccentric press is available. Press force: 200kN, stroke rate: 40rpm, throat: 550mm, rear-front passage: 800mm, table ram distance: 400mm, ram stroke: 40mm-180mm, ram adjustment: 110mm, ram dimensions X/Y: 1200mm/800mm, table dimensions X/Y: 1200mm/1000mm, mortise diameter: 50mm, mortise depth: 85mm, motor power: 15kW, machine weight: approx. 13200kg. On-site inspection is possible. Dcebewftc Novmk H Usg

Condition: used, Year of construction: 2002, Functionality: unexamined, machine/vehicle number: 71439-1, overall weight: 850 kg, electrical fuse: 16 A, nominal voltage: 400 V, usable length: 360 mm, For sale is a rotary table press from a series From the Magna inventory Fully functional and fully serviced including control system. Dsbvmk Hjwfqdqj Uecg

Condition: used, Year of construction: 1978, pressure 050 t throat 250 mm stroke 8 - 120 mm no. of strokes 100 /min distance table/ram, max. stroke up, adjustment up 400 mm table surface area 650 x 515 mm hole in the table 115 mm table height over floor 790 - 1020 mm table adjustable 230 mm ram surface 390 x 180 mm ram adjustment 70 mm power requirement 2,0 kW weight 2,6 t dimensions (WxDxH) 1,1 x 1,4 x 2,2 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) Dcsbsvut E Djvmk H Ueg with motor, rolling-key clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, foot operation can be inspected in running condition in our warehouse

Condition: good (used), Type DO 3 Machine No. 3492 Force 20 kN Dobvmowc Ntfsk H Uscg Stroke 39 mm

Year of construction: 2001, Condition: good (used), Offer 20202 Technical data: Dobvjp Dt Taomk H Uscg - max. pressing force 35 t - projection to the center of the ram 240 mm - working height adjustable with hand crank 540 to 940 mm - 2 hand controls - protective screen enclosure with light barrier - material - insertion device - pneumatic connection - Press control via SIEMENS SIMATEC OP 7 - drive 400 V / 15,5 kW - Space requirement approx. W 1200 x H 2000 x D 2400 mm - Weight approx. 2500 kg

Condition: new, pressing force: 100 t, - Capacity 100 tons - Cylinder stroke 400 mm - Working width 1000 mm - Pressure gauge - Emergency stop - 400 V Djbvewfnqzemk H Ujcg

Year of construction: 1990, Condition: ready for operation (used), Pressing force: 2000kN, max. stroke: 400mm, throat depth: 300mm, ram table distance: 965mm, ram speed forward/reverse: 100mm/s, working speed: 10mm/s, table width: 1700mm, working length: 2600mm, working height: 1080mm, column distance: 2300mm. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 17500kg. On-site inspection is possible. Dsbvmkowftdae H Uscg

Year of construction: 2007, Condition: used, machine/vehicle number: 177000/2, Maximum workpiece outer diameter: 500 mm Maximum workpiece height: 200 mm Minimum workpiece inner diameter: 60 mm Dcobvepbb Uzomk H Ujg Holding down force inner thrust ring: 120 kN Holding down force of outer pressure ring: 240 kN Expanding force of the expanding mandrel: 60 kN Expulsion force: 800 kN Pump capacity for hardening oil flow basic device: 750 l/min Hardening oil tank capacity of the hardening machine: approx. 2000 litres Hydraulic oil tank capacity: 400 litres Operating pressure pneumatics: 6 bar

Condition: used, Year of construction: 1973, pressure 500 t distance between columns 1620 mm Dcsbvmevuk Euok H Ueg stroke 40 - 160 mm no. of strokes 32 / 48 Hub/min dayligth (stroke and adjustment up) 660 mm column travel -side 400 x 430 mm table surface area 1600 x 1300 mm table height over floor 750 mm ram surface 1400 x 1200 mm power requirement 44,0 / 66,0 kW weight of the machine ca. 56,00 t required space 3,55 x 2,55 x 5,1 m with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation Video of 'sister maschine' available

Condition: used, Pneumatic toggle press BURGER type D04 No. 4497 Year of construction approx. 1972 Compressive force max. 6 ton. Projection 150 mm Dcebvmk Hevcdvps Ueg ram stroke 39 mm Table size 340 x 270 mm Drop-through opening Ø 46 mm Installation height max. 160 mm Tool holder Ø 25 mm ram plate Ø 90 mm Pneumatic operating pressure 5 bar Mains connection 220 V 50 Hz - Pressure regulator for press force adjustment - stroke height adjustment 7, 21, 40 mm - electric foot switch - Table height adjustment Space requirement L x W x H 700 x 500 x 1300 mm Weight 240 kg good condition

Condition: good (used), Year of construction: 1977, Offer 25021 Technical data approx.: - Pressure force 250 t - Projection 360 mm - Table size approx. 1100 x 800 mm - Hole in the table approx. 320 mm - Ram surface approx. 800 x 475 mm - Tenon hole in the ram mm - Ram adjustability 110 mm - Stroke adjustment 30 - 140 mm - Max. stroke rate 45 1/min - Pneumatic connection 6 bar - Drive 400 V / 22 kW - Space requirement approx. W 1400 x H 2990 x D 2700 mm - Weight approx. 13 T Dsbsvmx N Ejvmk H Ujcg

Condition: used, Year of construction: 1985, pressure 500 t distance between columns 3100 mm stroke fix 300 mm no. of strokes 20 - 70 Hub/min dayligth (stroke and adjustment up) 1000 mm column travel -side 1400 mm table surface area 2800 x 1600 mm ram surface 2800 x 1450 mm power requirement 90,0 kW weight of the machine ca. 100,00 t required space 5,75 x 3,2 x 7,8 m ram adjustment 100 mm height over floor 6,4 mm Dcebvsvut N Ajmk H Ueg permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation, stored in dismantled condition (no PLC + main motor available)

Condition: good (used), Year of construction: 1962, machine/vehicle number: 5601062, Offer 24287 Technical data: - Compressive force 60 t - Projection 350 mm - Table size approx. 900 x 600 mm Dcsbvmk Hou Ilkio Ueg - Table height adjustable - Drop-through hole in table approx. 300 x 200 mm - Maximum installation height approx. 360 mm - Plunger surface approx. 340 x 160 mm - Pivot hole in plunger 40 mm - Plunger adjustment 60 mm - Stroke adjustment 10 - 90 mm - Stroke rate 110 1/min - Rotary wedge clutch - Drive 400 V / 5.5 kW - Space requirement approx. W 2000 x H 2200 x D 2400 mm - Weight approx. 3500 kg

Condition: used, Year of construction: 1995, pressure 063 t throat 260 mm stroke 12 - 120 mm Stroke rate 30 - 130 / min Distance table/ram, max. stroke up, adjustment up 495 mm Table surface area 800 x 560 mm Hole in the table 220 mm table height over floor 800 mm Passage to the back 270 mm Ram surface 450 x 360 mm Ram adjustment 120 mm Dcsbvsvut Ewomk H Ueg Power capacity 5,5 kW Weight 5,0 t Dimensions (WxDxH) 1,8 x 1,5 x 2,7 m only permitted for automatic mode according to the CE Regulations with infinitely variable drive, pneumatic clutch/brake combination, mechanical overload protection in ram, fix table, two-hand operation can be inspected in running condition in our warehouse

Condition: good (used), Year of construction: 2000, Offer 24467 Technical data: Dcsbvmk Hjuzhmge Ujg - max. pressing force 10 t - max. ram stroke approx. 550 mm - Tool mounting thread M 16 - Width of column approx. 1000 mm - Column depth approx. 500 mm - Min. / max. installation height 450 / 1350 mm - Table height adjustable - Space requirement approx. W 1600 x H 2650 x D 850 mm - Weight approx. 350 kg

Condition: used, Year of construction: 1990, pressure 60 t throat 400 mm stroke 600 mm dayligth 700 mm Dcjbvevut Edemk H Ujg table surface area 1120 x 700 mm table height over floor 850 mm ram surface 700 x 700 mm feed down 300 mm/sec feed up 130 / 260 mm/sec feed under pressure 5 / 10 mm/sec oil volume 275 l total power requirement 7,5 kW weight of the machine ca. 7,3 t required space 1,6 x 2,0 x 3,7 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation can be inspected in running condition in our warehouse - new control can be offeren on request

Year of construction: 1980, Condition: good (used), machine/vehicle number: 3253-80, Offer 22045 Technical data approx: - Compressive force 10 t - throat 150 mm - Table size . 520 x 320 mm - Table height adjustable 160 mm - drop-through hole in table 165 x 125 mm - gr. installation height 220 mm - ram surface 240 x 150 mm - mortise in ram 30 mm - ram adjustability 40 mm - stroke adjustment 4 - 60 mm - stroke rate 130 1/min - hydr. actuated clutch - Two-hand operation - E. foot switch - separate switch cabinet - drive 380 V / 1,1 kW - space requirement approx. W 1000 x H 1800 x D 1100 mm - weight approx. 1300 kg Dcebvmkjktg Dhe H Uog

Condition: used, Year of construction: 1991, pressure 125 t distance between columns 2100 mm stroke 1000 mm dayligth 1300 mm table surface area 2230 x 1300 mm die cushion capacity 63 t die cushion stroke 60 mm die cushion area 1000 x 900 mm table height over floor 1050 mm ram surface 2100 x 1000 mm Debvovut D Tjmk H Uscg feed down 50 mm/sec feed up 50 mm/sec working feed 10 mm/sec oil volume 410 l power requirement 22,0 kW weight 31,0 t required space 3,1 x 1,7 x 5,95 m hydraulic try-out press permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table and ram, hydraulic ejector in table, ram interlocking, two-hand operation No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: good (used), Year of construction: 1970, Offer 25020 Technical data: - Pressure force 200 t - Projection 400 mm Debvmovnmblok H Uocg - Table size approx. 1000 x 750 mm - Hole in the table approx. 320 x 220 mm - Ram surface 940 x 400 mm - Ram adjustability 100 mm - Stroke adjustment 20 - 130 mm - Drive 380 V / 10 kW - Space requirement approx. W 1400 x H 2980 x D 2900 mm - Weight approx. 13000 kg

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm hole in the table 180 x 140 mm table height over floor 700 mm ram surface 360 x 275 mm Dcebvmsvuk Ensk H Uog ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation can be inspected in running condition in our warehouse

Year of construction: 1983, Condition: used, machine/vehicle number: 535350, Lg-Nr. 05466, - Compressive force 100 t - Throat 320 mm - Width in the column below the guide 400 mm Dcebvmk Hj E A Tmo Ujg - table size approx. 850 x 610 mm - drop-through hole in the table 335 / 300 mm - thickness of the table clamping plate 90 mm - overall installation height approx. 300 mm - surface of the chair 600 x 335 mm - height adjustment of the chair 80 mm - stroke adjustment 10 - 130 mm - ejector stroke in the chair 32 mm - Stroke rate continuous operation approx. 56 /min - Drive 380 V / 11 kW - space requirement approx. W 1900 x H 2800 x D 2200 mm - weight approx. 9000 kg - with : - UVV press safety control unit PREVENTA - Hydr. + pneumatically operated clutch - LUTEX additional brake system - central lubrication