Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, vacuum table by Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, form gluing, form veneering, edge gluing, etc. With this press, you can, with some limitations, do without a hydraulic veneer press. New heat-resistant silicone membrane, extremely stretchable and easy to clean. Also suitable for shaping preheated thermoplastic materials such as acrylic glass or mineral materials. Frame internal dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Working height approx. 900mm Dodpfx Acjy Hl Hps Hsck Vacuum pump Becker VT4.40, 400V, 1.5 kW with 40 m³/h capacity and two vacuum tanks, each 200 liters, for comfortable operation and rapid evacuation. Electronic vacuum pressure switch, which means the pump switches off when the target negative pressure is reached and does not run continuously. Movable on four swivel casters, lockable Frame easily folds open, secured with two latches Double frame for quick replacement of the membrane. A new silicone membrane is currently installed. Rapid distribution of the vacuum through a grooved base plate. CE marking Original paint, some areas have been touched up The silicone membrane and the base plate have been replaced, the machine is ready for immediate use. Dimensions approx. 3100 x 1550 x 1020mm (L x W x H). Weight approx. 550kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, total width: 1,350 mm, total height: 1,500 mm, total length: 2,000 mm, overall weight: 1,350 kg, input voltage: 9 V, oil tank capacity: 250 l, Equipment: cooling unit, Briquette press POR Oscar, 9.2 kW, newly overhauled, with a new control panel, available immediately. Capacity up to 175 kg/h, briquette diameter 70 mm. A new cooling unit (chiller) can be added if desired. Can be inspected while powered on. Dcodpszq Hwbsfx Ac Hjk

Condition: good (used), Year of construction: 1992, functionality: fully functional, WEIMA TH 400 briquetting machine - after technical overhaul - Made in Germany - very good condition - year of manufacture 1992 TECHNICAL PARAMETERS: power of main engine 7.5 kW machine output approx. 80 kg/h briquette diameter 50 mm feeding dimension 2000 x 1800 mm adder feeding the material to the piston stirrer machine overall dimensions (length / width / height) 240 / 190 / 200 cm weight ~ 850 kg TH hydraulic briquetting machines are compact equipment for briquette production. Briquetting machines can be filled manually or automatically directly into the hopper. The units of this series, by their small size and quiet operation, are ideal for setting up on the production floor. Characteristics: - reduction of production waste volume - low purchase costs - low energy consumption - compact design takes up little space - excellent processing quality - durable construction and long service life - trouble-free maintenance and low consumption - simple operation Dcedpfxjt U Et No Ac Hsk The main application scopes of briquetting presses are, for example: - in combination with a dust extraction or filtration and dedusting plant - for manual feeding of material - as a whole combined with a chipper (e.g. WEIMA WL4) - with a screw feeder or conveyor belt - with a mobile dust extraction system or combustion furnace

Condition: excellent (used), Press for gluing wood with a feeder STETON PLA 2500x1300 - Italian production - CE and DTR - year of production 1998 TECHNICAL PARAMETERS: shelf dimensions 2500 x 1300 mm six hydraulic cylinders with a diameter of 85 mm automatic glue applicator with pneumatic feed a four-section feeding table with the possibility of setting each section individually the ability to set the number of elements fed for each section element dimension min. 300x30x25 (LxWxT) mm element dimension max. 2500x160x40 (LxWxT) mm shelf pressure 260 bar max pressure of side pressure 120 bar bumper max pressure 200 bar total power 11 kW temperature max 120 " roller feed speed from 5-60 m / min feeder speed 0 -40 m / min adjustable speeds on the inverter roller receiving table 1400 x 2500 mm seven side hydraulic cylinders 1800 mm feeding conveyor electric heating of shelves cross feeding table 2500 x 1400 mm total length 588 cm total width 497 cm Transport dimensions Dcodpfeh Tm A Eox Ac Hok 1000x 230x 220 cm weight 11 t

Condition: used, Year of construction: 2006, functionality: fully functional, total width: 1,900 mm, total height: 1,800 mm, total length: 2,500 mm, briquette diameter: 80 mm, overall weight: 2,400 kg, type of input current: three-phase, oil tank capacity: 600 l, – after technical inspection – Italian production – year of production 2006 – DTR TECHNICAL PARAMETERS: – briquette Ø: 80 mm – max. briquette length: 80 mm – efficiency: 350 kg/h – engine power: 27.5 kW – hydraulic crush: 1400 kg/cm2 – max. operating force: 150 bar – oil capacity: 600 l Dcjdpfjv T Uphjx Ac Hjk – container diameter: Ø 1200 mm – container height: 90 cm – dimensions (length/width/height): 2500 x 1900 x 1800mm – net weight: 2400 kg

Condition: used, Year of construction: 1999, functionality: fully functional, total length: 8,120 mm, total height: 2,300 mm, Vertical Hydraulic Press FAMAD HSKG 6m – Number of loading zones: 3 Dimensions of a single loading zone: – Loading height: 1140 mm – Length of battens in one zone: 1530 mm – Maximum batten width: 150 mm – Maximum length of glued elements: 3120 mm – Installed power: 3 kW – Number of cylinders per zone: - 3 pcs 50x100 mm - 3 pcs 80x100 mm – External dimensions (L x W x H): 8120x1000x2300 mm – Machine weight: 4800 kg Dodjyuylnspfx Ac Heck

Condition: new, Year of construction: 2026, CORMAK V3000 Hydraulic Gluing Press The CORMAK V3000 is an industrial hydraulic gluing press designed for bonding solid wood components, furniture panels, worktops, and laminated boards. Built around a heavy-duty steel frame and equipped with four hydraulic clamping units providing a combined pressing force of 10 tonnes, the machine ensures consistent production results and high-quality bonded joints. Key Features 4 × 2,500 kg clamping force – evenly distributed pressure ensures strong and durable bonding across the entire workpiece surface. Heavy-duty steel frame – high structural rigidity provides excellent stability and resistance to deformation, even during prolonged operation. Adjustable clamping units – quick and easy positioning allows the press to accommodate a wide range of workpiece sizes. Dodpowcy T Aofx Ac Hsck Pressure locking system – maintains constant clamping pressure without the need for continuous adjustments. Spring-assisted side guide for hydraulic cylinders – ensures smooth piston movement and precise operation of the clamping units. Heavy-duty locking nuts – securely hold the selected settings, improving safety when working under high clamping forces. Construction and Technology The V3000 is manufactured from high-grade structural steel, offering excellent resistance to deformation and long-term mechanical fatigue. Each of the four hydraulic clamping units is mounted within a rigid guide system, ensuring accurate distribution of clamping pressure in both the horizontal and vertical directions. The simple adjustment mechanism allows the operator to position the clamping units with a minimum spacing of 240 mm, making the press suitable for both short and irregularly shaped workpieces. The large working capacity accommodates panels up to 1,550 mm in height and 3,000 mm in width. Precision and Performance The CORMAK V3000 provides a uniform distribution of clamping pressure, eliminating gaps and ensuring consistently strong adhesive joints. Stable clamping settings and an integrated pressure locking system improve process repeatability, making the machine particularly suitable for high-volume production. The press is ideal for bonding solid timber, laminated panels, and frame components. Its intuitive operation requires minimal setup, allowing operators to focus on production quality and efficiency. Applications The CORMAK V3000 is ideal for: Manufacturing laminated furniture components and cabinet fronts Producing worktops, edge-glued panels, and laminated timber panels Woodworking shops and industrial facilities processing glued timber Manufacturing stairs, doors, windows, and structural timber frames Standard Equipment Four hydraulic clamping units Heavy-duty steel frame with a 3,000 mm working length Individual pressure locking mechanism for each clamping unit Spring-assisted side guides for the hydraulic cylinders Optional Equipment Additional hydraulic clamping units Quick-connect hydraulic coupling system for an external hydraulic pump Height-adjustable support stands Technical Specifications Specification Value Overall Height 2040 mm Overall Width 3000 mm Maximum Clamping Height 1550 mm Minimum Distance Between Clamping Units 240 mm Distance from Mounting Hole to Clamping Unit 50 mm Clamping Force 4 × 2,500 kg Total Weight 260 kg

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, Equipment: CE marking, TECHNICAL SPECIFICATIONS Maximum mounting hole dimensions: 3500 x 2500 mm Minimum mounting hole dimensions: 250 x 350 mm Dcodpfxjznv A Ue Ac Hsk Vertical cylinders: 2 pcs, ø 65/40 mm, stroke 1300 mm Total lifting capacity of vertical cylinders: 7.4 tons Horizontal cylinders: 2 pcs, ø 50/30 mm, stroke 1500 mm Total lifting capacity of horizontal cylinders: 2 tons Hydraulic unit 1.5 kW *The maximum size of the workpiece will be smaller than the maximum operating range of the press, depending on the type of joint (dovetail or pin) and the method of positioning the workpiece in the machine (pre-assembled or unassembled). PRESS DESCRIPTION • 3 positions for the lower beam • Pressure is adjusted directly from the hydraulic unit using a knob; the current pressure is displayed on an indicator during operation. • All electrical components are manufactured in accordance with European standards; each component has a code corresponding to the marking on the electrical diagram. • Hydraulic unit with a pump in an oil bath for better noise reduction and lubrication. A 1.5 kW motor is installed on the oil tank. • The rack and pinion system allows for precise movement of the upper beam. • The supporting structure is made of welded iron elements, Fe 430 grade. • Control panel: - Button for vertical movement of the beam - Button for vertical clamping - Button for opening the horizontal clamping corners - Button for horizontal clamping of the corners - Additional button for two-handed activation of the press functions Warranty: 12 months on spare parts

Year of construction: 2026, condition: new, New machine Year of manufacture: 2026 The space-saving, swiveling vacuum press with a pressing area of 3500 mm x 1420 mm. Technical standard equipment of the vacuum press: Unless otherwise agreed, the vacuum press is powder-coated in RAL 7012 and RAL 7035 color shades. Custom colors are available upon request and must be clarified in advance, which may result in additional charges. Djdpfx Aeznph Rec Heck Welded table construction designed for professional use, mounted on a swiveling chassis cart, standing on 4 swivel castors, surface load capacity of 150 kg. When not in use, the machine can be swiveled for space-saving storage and locked in place, reducing the required depth to only 800 mm. The table surface consists of a 22 mm thick HPL-MDF board, with a slotted vacuum distribution plate made from MDF covering the pressing area. The membrane frame is supported by 2 gas pressure springs mounted on the sides of the machine. A natural rubber membrane with 2 mm thickness, 780% elongation capability, and temperature resistance up to 70°C is installed, attached by a clamping system for efficient membrane changes. The all-around sealing of the press area is provided by a sealing profile installed in the membrane frame. Oil-circulated vacuum pump with a suction capacity of 40 m³/h and two vacuum tanks with a total capacity of 200 liters. Evacuation and ventilation of the press area is managed via a 3-way ball valve located at the front of the machine. The machine is delivered pre-assembled on a pallet. Please note that unloading requires a forklift with sufficient lifting capacity and fork length. Additionally, it is possible to book initial setup and a quick instruction by one of our staff members. If desired, we are happy to provide you with a separate offer for this service. Summary of key data: - Welded frame construction - Highly flexible natural rubber membrane, thickness: 2 mm, elongation: 780%, very high recovery capability, suitable for temperatures up to 70°C - MDF vacuum distribution plate - Digital vacuum control VAK-CONTROL 1 with auto shut-off - Vacuum pump: 40 m³/h, oil lubricated - Max. vacuum: -0.99 bar - Max. pressing pressure up to 9.9 t/m² - Connected load: 1.40 kW (400 Volt) - Vacuum tank: 200 liters - 4 swivel castors with locks - Additional 13 mm vacuum connection - Pressing area: 3500 x 1420 mm - Table height to vacuum distributor plate: approx. 895 mm - Machine height closed: approx. 960 mm - Machine height closed with cover plate: approx. 1030 mm - Installation dimensions, operational: 3790 x 1700 x 2150 mm (LxWxH) - Installation dimensions, swiveled: 3790 x 800 x 1750 mm (LxWxH) Commodity code: 84659400 Net weight: 570 kg Gross weight: 660 kg Includes cover plate 3514 With a cover plate, you not only protect your membrane from UV radiation, but also convert your mobile-base vacuum press into a mobile worktable that can be used flexibly in your company. - Coated cover plate - Solid welded steel frame - Opening support by gas pressure springs Commodity code: 84669280 Net weight: 105 kg Gross weight: 105 kg The cover plate is only available in combination with a vacuum press.

Condition: good (used), Code: 0454 Brand: CASOLIN - ITALY Model: EASY - CE Standard Hydraulic automatic single-bar clamp press for window and door frames – CE Standard Technical data: Min/max working length mm 250/3000 Min/max working height mm 340/1900 Min/max nominal vertical thrust pressure 880/8800 kg Min/max nominal horizontal thrust pressure for cylinder 280/2800 kg Horizontal pistons stroke 200 mm Pump power 3 Kw Width of the bars 120 mm Dcedpfx Acjznnfzo Hjk The upper mobile bar is guided through its its movement by a unit composed by 2 gears and 2 racks positioned on the rear of the machine The regulations of the oil pressure of the vertical and horizontal cylinders are separate and adjustable by through the use of two handwheels The lower press bar can work in 2 positions Control button panel in ergonomic position with pensile arm Overall dimensions mm 3870 x 1040 x 2900 h Overall dimensions for transport mm 3870 x 1040 x 2690 h Weight kg 1800

Condition: good (used), Code: 0455 Brand: VALENTINI - ITALY Model: C 2 P Pneumatic clamp desk for drawers, furniture, frames, cabinet doors and various Dcodoznk Ncepfx Ac Hek Technical data: Worktop dimensions 2500 x 1300 mm Worktop height from floor 720 mm N° 8 thrust cylinders with adjustable stroke N° 9 support fences Cylinder thrust 586–790 kg N° 2 control panels Operating pressure 6/8 atm Overall dimensions mm 2600 x 1300 x 900 h Weight kg 1100

Condition: ready for operation (used), Press technology for laminated veneer lumber (LVL) and similar products. BSH press Cross-laminated timber (CLT) press Glued laminated timber (glulam) press Dcsdezqdytopfx Ac Hjk

Condition: ready for operation (used), Year of construction: 1988, machine/vehicle number: 100.613, functionality: fully functional, Machine available for immediate delivery. Forklift available for loading. 2 cylinders per pressing unit. Cylinder stroke approximately 110 mm. Dcodpfey Tly Ajx Ac Hok Maximum pressing force approximately 1000 kp. Working width 250 - 2500 mm. Working height 250 - 1250 mm. Working depth max. 600 mm. Electric height adjustment of the central vertical unit with scale. Manual adjustment of the central horizontal unit in 50 mm increments with pneumatic clamping. Separate control of the vertical and horizontal pressing units via hand control valve. Pressure force regulation 4 - 10 bar.

Condition: used, Year of construction: 2007, Filtration with briquette press 4kW press group Dodpfx Acjzm Uw Io Hock Briquets 120/45mm 400V

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, For sale is an R. Beck multi-level gluing press in a robust industrial design. This machine is ideally suited for efficient carcass, frame, and panel construction, as well as for a wide range of gluing applications in carpentry and furniture making. The 5 independently operated press levels allow for the simultaneous processing of multiple workpieces, resulting in high productivity. Dcodpfxezm Slvj Ac Hsk Technical data: Manufacturer: R. Beck Maschinenbau Year of manufacture: 1997 Usable length: 2,000 mm 5 press levels Operating pressure: 6 bar CE version Machine no.: 270 Equipment: Pneumatic multi-level gluing press 5 press levels, individually selectable Pneumatic pressing Multiple clamping cylinders per level Even pressure distribution Control panel with individual control of the press levels Mobile base frame Robust industrial design Ideal for carcass, frame, and panel gluing Application areas: Furniture manufacturing Carpentry Joinery Carcass gluing Frame gluing Panel gluing Series production Condition: The machine is in used, well-maintained condition with the usual signs of wear and tear consistent with its age. Thanks to its robust construction, it is ideally suited for professional use in crafts and industry. Inspection and test run are possible at any time by appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information is without guarantee.

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, Complete pellet production line, consisting of: Wood chip feed hopper 8m³ Hammer mill 22 kW Chip bunker with 3 discharge openings Djdpsy Ayiwjfx Ac Heck Screw conveyor with dosing unit (binder) Walw pellet press Conveyor belt Pellet cooling bunker with packaging unit and fine particle screening

Condition: new, Year of construction: 2023, functionality: fully functional, total width: 1,800 mm, total height: 2,000 mm, total length: 1,600 mm, overall weight: 3,000 kg, This is a new brand new machine available immediately. Dcedpfx Asukfvpsc Hsk

Condition: good (used), Year of construction: 1997, functionality: unexamined, Equipment: CE marking, Used LIGMATECH carcass press Dcjdpfozp Sbiox Ac Hek - Model MPH 10 (GAZELLE) - immediately available - Year of manufacture 1997

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total length: 3,050 mm, total width: 1,400 mm, Equipment: CE marking, 3050 mm x 1400 mm automatic membrane press with turnover and pin system. Has two tables. Djdezp H Ikepfx Ac Hjck 320 Bar Working Pressure 60 N/cm^2 Spec. Press. 3000 kN Max Pressure 400V 50hz Ready to use in Turkey; can ship abroad.

Condition: as good as new (ex-display), Year of construction: 2010, Capacity 180 - 300 kg/h Dedjxy S E Njpfx Ac Hjck Diameter of the briquets 50 mm 0,3 m³ lubrication pump 1,0 kW engine output 15 kW

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, A used briquette press C.F. Nielsen BP 5000 in very good condition Dodpfjwiw Rxsx Ac Hsck

Condition: used, Dimensions: approximately 2500 x 1200 x 600 mm, semi-hydraulic, with electro-motorized adjustment of the press wall. Dsdpfxjzd Hm Ne Ac Hsck Storage location: Nattheim.

Condition: used, functionality: fully functional, Manni shelving press for veneering, 2500×1300 Shelf length: 2500 mm Dedpfszmh Ndox Ac Hjck Shelf width: 1300 mm Feed height: 410 mm Working pressure: 300 bar Press with 4 cylinders

Condition: good (used), Code: 0448 Brand: KOLMAG - ITALY Model: PGP 80 Hydraulic cold press for panels, furniture, doors, joinery, composite materials and various: Technical data: Platens dimensions 2500 x 1100 mm N° 4 pistons Opening 310 mm Thrust 60 ton Motor 4 Hp Dcjdpfx Aszmifgsc Hek Overall dimensions mm 3100 x 1150 x 1780 h Weight kg 2200

Condition: excellent (used), CATALOG NUMBER 7992 TECHNICAL DATA - Loading fields: 2 - Manually adjustable side clamps: 2x6 pcs Dcodpfxozmgk Tj Ac Hjk - Pneumatic vertical clamps: 2x6 pcs - Max length of glued elements: 3600mm - Max height of glued elements: 1500mm - Max thickness of glued elements: 130mm - Guides for gluing thin elements - Dimensions (L/W/H): 4300x1570x2110mm - Weight: 1400kg ADVANTAGES – Two working zones – Gluing length 3600mm – Pneumatic actuators – Guides for gluing thin elements – Unpainted – Mobile – on wheels – Used press, in very good condition Net price: 14,900 PLN Net price: 3,550 EUR Net price calculated at 4.2 PLN/EUR exchange rate (In case of significant exchange rate fluctuations, the price may change)