Used press brakes with 200-299t bending force for sale (204)

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 331.00465, functionality: fully functional, power: 2.2 kW (2.99 HP), input voltage: 380 V, input frequency: 50 Hz, pressing force: 16 t, stroke length: 100 mm, operating speed: 90 mm/s, overall weight: 950 kg, Model:PE6-16 Pressure/Tonnage: 16 Tons Distance Over Bed: 600mm Full Length Top and Bottom Tooling Guarding Control: CNC 402 Hnodpfx Aajzux Rustor

Condition: repair required (used), Year of construction: 2019, pressing force: 220 t, overall weight: 12,620 kg, controller model: Delem DA-66T, working width: 3,050 mm, number of axes: 6, The press brake cannot be aligned because the X and R axes are blocked. This is a machine that is to be repaired or is intended for a project. TECHNICAL DETAILS Number of axes: 6 Axes: Y1 + Y2 + X + R + Z1 + Z2 Press force: 220 t Max. working width: 3,050 mm Frame spacing: 2,500 mm Crowning system: CNC-controlled Ram holder: hydraulic Hnsdpfjzuw Ewex Aater Tool holder type: WILA standard MACHINE DETAILS Drive: CNC Control: Delem DA-66T Power: 22 kW Dimensions & Weight Dimensions (L x W x H): 3,750 x 1,900 x 2,900 mm Weight: 12,620 kg Transport packages: 1 EQUIPMENT Tools

Condition: new, Year of construction: 2025, sheet thickness - max. 8 mm pressure 200 t chamfer lenght 3200 mm engine output 15 kW return speed 105 mm/min working feed 9 mm/sec x-travel 600 mm Hjdpoxf Na Usfx Aatsnr Max. opening height 570 mm control DELEM DA53T GERD WOLFF KANTO 200T CNC Electro-Hydraulic Press Brake CNC axis accuracy 1) Machine sliders (Y1, Y2) – synchronisation precision: The slider movement axes control the bending depth and bending angle. The system consists of the control unit, two glass scales (Y1, Y2) installed on the work table, electro-hydraulic proportional valves and an amplifier. A closed control loop detects and controls the relative position of the slide and table as well as the speed and position of the slide. This ensures the synchronisation of the slide and maintains the bending depth and angle with high precision. Positioning accuracy: ±0.02 mm Repeatability: ±0.02 mm 2) Machine backgauge (X axis): The forward/backward movement of the X-axis controls the dimensions of the sheet metal cut. The stop bar is driven by a servo motor and moves the crossbeam via a ball screw and linear guide. Operation is stable and precise. Positioning accuracy: ±0.10 mm Repeatability: ±0.03 mm 3) Mechanical compensation system (V axis): The pull plate of the mechanical compensation is moved by a motor so that the compensation points are formed in an arc shape. The points perfectly compensate for the elastic deformation of the work table and slide to ensure angular constancy and straightness of the workpiece. Position sensors and CNC control ensure precise regulation.

Condition: new, pressure 220 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 150 mm/sec work speed 10.0 mm/sec return speed 140 mm/sec work stroke 265 mm dayligth 480 mm table height 900 mm table width 110 mm oil volume 300 ltr. voltage 400 Volt total power requirement 18.5 kW weight 15000 kg range L-W-H 5000 x 2400 x 2850 mm ALPMAC Manufacturer Video: ?v=_FxXyPAcxlE ?v=YfkX9RwWv_0 ALPMAC Product Video Model B: ?v=lmT1tfy43WE ----- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: * increased installation height * increased cylinder stroke * increased throat depth ----- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMANY) ! HIGH RUNNING QUIET DUE TO LOWER OPERATING PRESSURE (50-60 dB) ! INDUCTION-HARDENED & CHROME-PLATED CYLINDER PISTONS FOR CONTINUOUS USE ! ALUMINUM CAST REAR STOP COMPONENTS ! REAR STOP WITH POWERFUL DRIVE MOTOR (1.0 kW) ! MACHINE TABLE MADE OF ROBUST & DURABLE STEEL (C45) GREEN ECO Technology: Lower consumption. More quiet. Full control. ! Peak performance with minimal energy consumption ! Maximum power at minimal cost ! Maximum performance when it's really needed ! Main motor is only activated by the foot pedal ! No energy wasted in standby mode ! Controlled start-up process Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA-66T- graphics/touchscreen * 2D graphic touchscreen programming operation * 3D display in simulation and production * 17" high-resolution color TFT screen * Bending sequence calculation * Product programming and display in actual size * USB interface - CNC controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - CNC electro-motorized backgauge (X-axis) * on ball screws * Travel: max. 750 mm * X-axis travel speed: 350 mm/s Hedpfeynnk Esx Aatenr * with 2x CNC-controlled backgauge fingers - CNC electro-motorized height adjustment (R-axis) * Travel: max. 250 mm * R-axis travel speed: 300 mm/s - CNC electro-motorized table crowning - ROLLERI Rehfuß upper tool "PS 135.85-R08", System "A" * including quick-change clamping * including crowning device in the tool holder - ROLLERI split universal die block "M 460 R" * including 1x die shoe "C 1050-R" - Rear safety device: light barrier - HAWE hydraulic components - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - 2x front support arms with sliding system * easily and keylessly height-adjustable - FIESSLER freely movable double foot control - CE marking / Declaration of Conformity

Condition: not inspected (used), Press brake Darley Type EHP 260.43/37 year of construction 1992 converted to Delem control DA-56s Without light barriers, does not comply with current UVV regulations CNC back gauge Hnodpfsuhf Tzox Aater Pressing force 2600KN Motor power 18.5 KW Working width max. 4300mm throat 300mm Weight approx. 23,000kg The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals!

Condition: good (used), Year of construction: 1996, machine/vehicle number: 090171, Offer 26222 Technical data: - Pressing force: 200 t - Working width: 4100 mm - Distance between uprights: 3050 mm - Table width: 220 mm - Overhang: 500 mm - Installation height: 550 mm - Approach speed: 80 mm/s - Working speed: 0 to 7 mm/s - Retraction speed: 70 mm/s - Stroke: 300 mm - Pneumatic connection - Drive: 400 V / 18 kW - Space requirement: approx. W 4800 x H 3150 x D 2200 mm - Weight: approx. 17000 kg - Includes: - Swivel arm – Control panel with DELEM DA 65 control, year of manufacture 2009 Hnodpezuziajfx Aator - Safety light curtain - Motorized back gauge - Punch and universal die - Two-hand control panel with foot pedal

Condition: used, Year of construction: 2018, machine/vehicle number: 1743, functionality: fully functional, operating hours: 36,725 h, power: 6 kW (8.16 HP), table width: 2,000 mm, table length: 4,000 mm, total length: 12,000 mm, total width: 3,000 mm, overall weight: 14,250 kg, Condition The machine is in used, fully functional condition and is currently still in operation. No known defects are present. Scope of supply The scope of supply includes: ByTrans loading system for automatic loading and unloading Existing documentation and operating manual Small quantity of wear parts Location and inspection Location: ASCO Anlagenbau Inspection: Possible by appointment Loading: Possible Hnodpfozhmh Iex Aator Availability: By agreement

Condition: excellent (used), Year of construction: 2008, pressing force: 200 t, stroke length: 415 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, table length: 4,100 mm, overall weight: 17,400 kg, Equipment: CE marking, safety light barrier, High quality, fully serviced, very clean Bystronic 4metre x 200ton cnc pressbrake for sale Complete with extended daylight and stroke Pr200 200 x 4100 Make: Bystronic Model: PR 200 Pressure Reference Year / new: 2008 Total axis:6 – 4axis back gauge X R Z1 Z2 Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 200ton Hnjdpfx Aszcw Uvjater Cnc control: Cybelec Max stroke 415mm Rapid approach 190mm/s Bending cycle 10mm/s Rapid return 150mm/s

Condition: used, Year of construction: 1992, pressure 0200 t chamfer lenght 3100 mm distance between columns 3000 mm Hnedoyy A D Sepfx Aater stroke length max. 400 mm feed down 160 mm/sec feed up 140 mm/sec feed under pressure 10 mm/sec oil volume 500 l dayligth 600 mm Control ModEva 12 S Cybelec throat 250 mm total power requirement 28 kW weight of the machine ca. 17 t dimensions of the machine ca. 4,5 x 2,7 x 3,4 m Electric hydraulic machine with Cybelec ModEva 12S control, some accessories, foot and two hand switch pane and safety arrangements. Machine has been verhauled and modernized in 2020 !! Machine is floor standing.

Condition: ready for operation (used), Year of construction: 2008, Pressing force: 3200kN, enlarged stroke: 810mm, working width: 4050mm, ram speed: downwards: 130mm/s, pressing: 6.5mm/s, upwards: 75mm, stop time: 109ms, safety distance: 174mm, weight: approx. 29000kg, operating hours: 16010h, control: Cybelec ModEva 15S. Including 4 bending aids and angle measuring sensor. Dies, embossing tools, pointed punches, roe foot punches, closing bar, extension for upper tool, radius tool and adapter available on request. Documentation available. Hnedpfx Aaewxb Igotor

Condition: good (used), Year of construction: 2011, total length: 5,100 mm, total width: 2,200 mm, total height: 3,400 mm, overall weight: 19,700 kg, Press force: 230 t Bending length: 4050 mm Distance between uprights: 3550 mm Upright overhang: 420 mm Oil capacity: 400 l Control system: ModEva 10S Machine weight (approx.): 19700 kg Dimensions: 5100 x 2160 x 3420 mm Equipment/Accessories: - Automatic tool clamping, pneumatic - Motorized crowning - Akas-Fiessler safety laser - Bending aid 1 + 2 (right and left) - Die shifting m1 and m2 Hjdpeztafqjfx Aatenr - Axis-controlled: Y1, Y2, Xs, Xm, X delta, R, Z1, Z2

Condition: used, Year of construction: 1987, pressure 100 t Working width max. 300 mm Hjdpfezr Rq Uex Aatonr serial number 55505 voltage 380 V weight 5000 kg

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total length: 3,280 mm, total width: 2,000 mm, total height: 2,700 mm, overall weight: 11,000 kg, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, PRESS BRAKE 200T × 3200 mm The press brake is used for forming sheet metal. During the slider cycle, the sheet metal can be bent to match the required geometric cross-section. The machine can be used in many industries – electromechanical industry, light industry, agricultural machinery manufacturing, shipbuilding, automotive industry, aerospace industry, etc. Machine Functions Back gauge position control Intelligent position control Recall functions Automatic reference point search Backup and restore parameters with a single identifier Fast position indexing Memory for 40 machining programs, each with 25 steps Power failure protection Technical Data Pressing force: 200 T Maximum workpiece length: 3200 mm Distance between columns: 2530 mm Throat depth: 320 mm Ram stroke: 200 mm Maximum opening height: 455 mm Motor power: 11 kW Weight: 11000 kg Machine dimensions (L × W × H): 3280 × 2000 × 2700 mm Equipment Controller MTP-3212 Ball guides for back gauge Two back gauge fingers Two front supports Cylinder covers Optical light curtains (front) Safety gates (rear) Foot pedal AMADA-type punch holder Four-side lower die prism Back gauge driven by electric motor Segmented punch with possibility to remove a damaged segment Hsdpsyttbmofx Aatsnr Delivery Conditions The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation manual in English Delivery to the customer is possible. Delivery cost according to an individual quotation from the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: used, Year of construction: 1996, Technical details: pressure: 300 t chamfer lenght: 6000 mm control: Delem DA 24e distance between columns: 2x5100 mm throat: 645 mm dayligth: 520 mm plate thickness: 5 mm total power requirement: ca. 10,0 je machine kW weight of the machine ca.: ges. ca. 66 t Hsdpfxsu Ib Dre Aatsnr dimensions of machine: L:12,0xB:2,3xH:3,65 m Hydr. Pressbrake 6000-300 - jib arm length= 720mm - incl. back gauge (without crowning system) adjustment travel horizontal/vertical: 680/200mm motoric Optionally, two of these press brakes can be offered - also applicable as a Tandem Pressbrake with 2x 6 meter with 300t, with table size: W:165xL.12000mm, - program sequence via both presse(synchronized) and single available Optional are tools available! Copy of documentation available i.D. *

Condition: used, Year of construction: 2015, Technical details: Hedpfxozq S E Rj Aatsnr pressure: 220 t chamfer lenght: 4280 mm distance between columns: 3760 mm weight of the machine ca.: 18 t

Condition: like new (used), Year of construction: 2022, pressing force: 80 t, Bystronic Xpress 80/2100 Hydraulic Press Brake Manufacturer: Bystronic Model: Xpress 80/2100 Serial Number: Xpress 22334EU Hodpey U I Tujfx Aatsnr Year of Manufacture: 10/2022 Technical Data: Maximum Press Force: 800 kN Maximum Working Length: 2100 mm Maximum Stroke: 200 mm Machine Weight: 6000 kg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, operating hours: 50,000 h, Equipment: CE marking, documentation/manual, Trumpf TruBend V200 bending cell + BendMaster 60 Hodpfx Aajzrxfaetonr Year of manufacture: 2004 Maximum pressing force: 2000 kN Maximum stroke: 365 mm Maximum operating pressure: 340 bar 1 unit B0401A0009 = BendMaster 60 1 unit B0106A0073 = TRB V200-6A 1 unit protective enclosure including lighting 1 unit BendMaster track, 14 meters in 2-meter segments 1 unit Trumpf system control

Condition: good (used), Year of construction: 1994, machine/vehicle number: 94 2055, Offer 26226 Technical data: - Pressing force 220 t - Working width 3050 mm - Clearance between the uprights 2550 mm - Table height 950 mm - Overhang 450 mm - Installation height 550 mm - Drive 400 V / 18.5 kW - Ground clearance - Space required approx. B 3500 x H 2950 x D 2000 mm - Machine weight approx. 17500 kg - Two-hand control panel with foot switch - Rear stop adjustable from the front via handwheel Hsdszrtyfjpfx Aatonr - Various bending tools

Condition: good (used), Press brake Manufacturer: EHT Hsdoy S U Efepfx Aatsnr Year of manufacture: 1995 Machine number: 210763 Type: EHPS 20-35 Press force: 200 t Control system: DNC 806 PS Bending length: 3,550 mm Distance between uprights: 3,050 mm Throat depth: 350 mm Stroke: 330 mm Back gauge: 5 to 1,000 mm Adjustability of the H-axis: 160 mm Condition: good Accessories: Lower tool (reversing die – installed) Main motor power: 18.5 kW Total power consumption: 25 kW Dimensions: 4,000 x 2,000 x 3,200 mm Weight: 17.7 t

Condition: ready for operation (used), Year of construction: 2003, pressing force: 204 t, stroke length: 185 mm, total width: 2,400 mm, total height: 2,850 mm, overall weight: 14,050 kg, product length (max.): 5,050 mm, Press brake manufactured in 2003. This Durma HAP 40200 features a press force of 200 tons and a bending length of 4050 mm. It operates at a stroke rate of 6 strokes per minute, with a stroke length of 185 mm. If you are looking to get high-quality bending capabilities, consider the Durma HAP 40200 machine we have for sale. Contact us for further details. Hnjdpszpbausfx Aater • Control system: Durma ENC 310 • Strokes per minute: 6/min • Maximum pressure: 295 kg/cm² (4278 psi) • Oil tank capacity: 150 L • Upper tool weight: 173 kg • Lower tool weight: 312 kg Technical Specification Bending Length 4050 mm

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Hnedoya Iaqjpfx Aater Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: excellent (used), Year of construction: 2008, pressing force: 100 t, Press force: 1000 kN (100 tons) Bending length: 2050 mm Stroke: 215 mm Opening height: 500 mm Overhang: 400 mm Column spacing: 1700 mm Back gauge: X, R, and Z axes Accuracy of Y-axis: ±0.004 mm Motor power: 7.5 kW Weight: 7400 kg Hnodpezclc Iofx Aator Year of manufacture: 2008

Condition: good (used), Year of construction: 2008, pressure 200 t chamfer lenght 4100 mm distance between columns 3150 mm stroke of upper beam 200 mm dayligth 425 mm throat 300 mm working feed 9.0 mm/sec return speed 90.0 mm/sec work height max. 980 mm back stop - adjustable ca. 700 mm Control PPS-TS Touch oil volume 350 l total power requirement 18.0 kW weight 12.000 kg range L-W-H 5100 x 1950 x 2850 mm Well-maintained condition (!!) Current new price approx. € 110.000 Special price on request - in checked conditions - machinevideo - ?v=ZX9Ap23e__s Equipment: - CNC electro-hydraulic press brakes - with LVD CNC "PPS-TS TOUCH" control unit Hsdpfx Aaezndq Hotenr * intuitive, touchscreen-based user interface * simple navigation * tool and program library * X-axis control and position display * Y-axis control and position display * swivel-mounted control panel (front left) - CNC-controlled axes: Y1/Y2 + X - CNC motorized backgauge (X-axis) * with 4 manually adjustable gauge fingers * includes lateral and height adjustment (Z and R axes) - LVD upper tool holder * sectionalized goose-neck upper tool - LVD lower tool holder * sectionalized 1V die - 2x front support arms - side safety guards (swiveling doors) - rear safety guard (swiveling door) - 1x movable foot pedal - machine documentation (NL)

Condition: used, Year of construction: 1987, Technical details: pressure: 200 t chamfer lenght: 4000 mm distance between columns: 3530 mm control for program: DNC 7000 max. stroke: 220 / min: 200 mm throat: 320 mm ajustment speed: 70 - 80 mm/sec working feed: 10 mm/sec return speed: 49 mm/sec back gauge: 700mm motorisch table-size: L x B: 4110 x 180 mm Hnodpou Icc Asfx Aater work height max.: inkl. Tischverlängerung mm interface: RS 232 connection voltage: 380 V total power requirement: 15 kW weight of the machine ca.: gesamt: 17,0 t machine dimensions LxWxH: 4,6 x 1,6 x 3,3 m incl. 2 pieces table extensions rear support 700mm travel motorized and 2 pieces support blocks with travel 1500mm motorized right/left operation via control panel swiveling and 2x foot operation Hydraulics: max. pressure 318bar; oil filling approx. 170 liters; pump capacity 19.3 l/min. Control DNC 7000, graphic display, PC software equipment: Cutting zone lighting stroke counter div. Tools optional *

Condition: used, Year of construction: 2008, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 380 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 160 t, total length: 3,400 mm, total width: 2,180 mm, total height: 2,780 mm, year of last overhaul: 2023, Equipment: CE marking, documentation/manual, safety light barrier, We are offering this used Ermak AP3100-160 press brake, manufactured in 2008, for sale. Power type: 3 AC Hodezqav Dopfx Aatenr Frequency: 50 Hz Operating voltage: 380 V Control voltage: 24 V Rated current: 35 A Rated current of the main fuse: 50 A Electrical wiring diagram no.: SN20080089 The machine is fully functional, and the last safety inspection was carried out in 2023. The machine is equipped with a press brake safety device (light curtain), which was also last inspected in 2023. Total weight of the machine: 9 tons Various tools (see photos) as well as the operating manual and safety inspection history are included in the scope of delivery. If you have any questions or require further information, please feel free to send us a message or call us.