Used Pressbrake for sale (235)

Condition: good (used), Year of construction: 2009, pressure 120 t chamfer lenght 3110 mm distance between columns 2600 mm column arm 410 mm ajustment speed 160 mm/sec working feed 10.0 mm/sec return speed 130 mm/sec back stop - adjustable max. 750 mm stroke 260 mm dayligth 460 mm table height 880 mm oil volume ca. 140 ltr. operating pressure max. 240 bar control STEP PX 13+ total power requirement 11.0 kW weight of the machine ca. 8400 kg. range L-W-H 4250 x 2000 x 2800 mm Equipped with a brand-new CNC control system Retrofitted in November 2026 Retrofit costs approx. 10.000 Euros (!) Features: - CNC electro-hydraulic press brake - Includes a brand-new "STEP PX 13+" control unit * Touchscreen operator panel * Direct on-screen drawing via 2D editor * Precise control of all axes * Bending sequence simulation * Automatic angle calculation * Material/tool ??library * Swiveling control panel (positioned at the front left) - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC-motorized backgauge (X-axis) * Includes 2x manually adjustable backgauge fingers - CNC-motorized height adjustment for the backgauge (R-axis) - CNC-motorized table crowning system - AMADA-style upper tool adapter (quick-change clamping) * Includes a crowning mechanism integrated into the tool holder * 1x set of segmented upper tools - AMADA-style lower tool holder * Includes a segmented 4-V die set - 2x front-mounted, adjustable support arms ("sliding" system) - Lateral safety guards (hinged doors) - Rear safety guard (sliding door) - 1x mobile 2-hand/foot control unit - Operating manual (PDF) Bwodpfx Aks Ahzitsnjw

Condition: used, functionality: fully functional, Year of construction: 2003, control type: CNC control, distance between stands: 3,700 mm, back gauge: 550 mm, overall weight: 21,500 kg, total length: 5,100 mm, total width: 2,000 mm, total height: 3,300 mm, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Bwodps Ahi Dbefx Aknsw Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: good (used), Year of construction: 2010, pressure 125 t chamfer lenght 3200 mm distance between columns 2700 mm throat 350 mm mould space 395 mm stroke of upper beam 160 mm work height max. 900 mm working feed 9 mm/sec return speed 90 mm/sec total power requirement 11 kW weight of the machine ca. 8,6 t dimensions of the machine ca. LBH 3,3 x 1,7 x 2,54 m -Electronic position display -Motorized backgauge Bwjdpfx Akj Aa A Rtsnjw -Crowning system -Upper tools as shown -x-bending die -Lazersafe safety system -Foot pedal -Operating manual

Condition: excellent (used), Year of construction: 1997, pressure 220 t chamfer lenght 4175 mm distance between columns 3760 mm column arm 410 mm dayligth 450 mm stroke 180 mm ajustment speed 100 mm/sec working feed 8.0 mm/sec return speed 75.0 mm/sec table width 180 mm table height 960 mm oil volume 190 l 0 295 bar controlled axis 5 Anzahl Number of working hours ca. 9.400 h total power requirement 15.0 KW weight of the machine ca. 16000 kg. range L-W-H 4810 x 2200 x 2990 mm Very good / well-maintained condition (!!) Only approx. 9.400 operating hours - Verified condition - Machine video - ?v=nDcOAjUtNi0 Equipment: - CNC electro-hydraulic press brake - Equipped with AMADA "OPERATEUR" CNC control - 5 controlled axes (Y1+Y2/X1+X2/R) - Swiveling control panel (on the left) - CNC-controlled depth adjustment (Y-axis) - CNC-controlled backgauge adjustment (X-axis) - CNC-controlled vertical adjustment of the backgauge fingers (R-axis) * Pneumatic height adjustment for the backgauge fingers Bjde Afzu Uopfx Aknoww - 4x manually adjustable backgauge fingers - AMADA CNC bed crowning (compensation system) - AMADA upper tool clamping system with wedge-style crowning * Includes 1x set of segmented punch tools (30°) - AMADA 60-series lower tool holder * Includes 1x set of segmented die holders * Includes 1x set of segmented 2-V dies - Lateral safety guards (swiveling doors) - Rear safety guards (swiveling door + protective fencing) - CE-marked - 1x mobile two-hand control unit - 1x mobile foot pedal * Includes a handwheel for fine-tuning the ram penetration depth (Y1+Y2) - Machine documentation

Condition: used, Year of construction: 2021, Max. pressure 100 ton Max. bending length 3060 mm Distance between uprights 3384 mm X-axis movement 600 mm Length of stroke (extended) 350 mm Bsdpfxexr U Nhs Aknsww Daylight (Extended) 580 mm Automatic crowning on lower tool base Controlled axis: Y1, Y2, X1, X2, Z1, Z2, R1 & R2 Control: Trumpf T3500T (3D colour/grafic visualization ) Equipped with: Tool package for 15.000 euro. 2 manual “lay up” arms Trumpf manually quick clamp top tool holders in full width - made by Wila Machine appears as brand new. Price when bought in 2021: Euro. 115.000

Year of construction: 2013, condition: good (used), Used modern, fully serviced Trumpf TruBend 3180 4metre x 180ton 6 axis down stroke hydraulic cnc pressbrake for sale Make: Trumpf Model: TruBend 3180 series 3000 Capacity: 4metre x 180 ton Year: 2013 Axis: 6axis – y1, y2, x, r, z1 and z2 axis Tonnage: 1800kn / 180ton Bwjdpfx Aksnyihuonsw Stroke: max 200mm Brake time: max 60mm

Condition: excellent (used), Year of construction: 2016, pressure 135 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 200 mm/sec work speed 10.0 mm/sec return speed 120 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90.0 mm control DELEM oil volume 200 ltr. voltage 400 Volt total power requirement 11.0 kW weight 8650 kg range L-W-H 4250 x 2050 x 2800 mm Very good condition (!!) Current new price: 75.0000 Euros Special price on request Bwedpfx Akoz Npz Eenew ----- POWER BEND PRO electro-hydraulic press brake featuring: * Increased daylight opening (installation height) * Increased cylinder stroke * Increased throat depth ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control DA 56 - 2D graphics * Bending sequence calculation * Product/tool ??library * USB interface - CNC-controlled axes: Y1 - Y2 - X - R + CNC crowning - CNC motorized backgauge * Backgauge with R-axis, on recirculating ball screws * Travel ranges: X = 800 mm // R = 250 mm * X-axis travel speed: 230 mm/s * With 4 manually adjustable backgauge fingers - ROLLERI "gooseneck" (swan-neck) upper tool "PS 135.85-R08", System "A" * Includes quick-change clamping * Includes crowning system integrated into the tool holder - ROLLERI sectional universal die block "M 460 R" * Includes 1x die holder "C 1050-R" * Additional 1V dies (see image 9) - Rear safety device: Light curtain - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety system at the front of the machine (incl. FPSC) * Pivoting doors (front left & right) are missing (!) - 2x front... Support arms with SLIDING system (HIWIN sliding bearings) - 1x freely movable dual foot pedal - CE mark / Declaration of Conformity - Operating manual incl. circuit diagram

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 244500 € 600 to 6050 mm 4 (Y1, Y2, X, R) 365 mm 5100 mm 510 mm 700 mm servohydraulisch 80 mm/s 6,5 mm/s 80 mm/s 1000 mm 350 mm/s 300 mm/s 250 mm 990 mm 154 mm 280 l 2 x 11 kW kW 7600 mm 2650 mm 3950 mm 52500 kg Standard equipment: 4 axes (Y1, Y2, X, and R) SVP (Servo Variable Pump) Technology SKY 22 CNC control - 21.5” Full HD graphic display with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easy drawing of the bending contour using your finger) - User-friendly, interactive programming in either 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of the developed length for sheet metal blanking - Automatic bending sequence calculation - Graphical product and tool library - Correction/adjustment capability - USB ports and Ethernet connection for importing, backing up, and exporting programs - Windows operating system - Support for importing IGES, STEP, and DXF files Servo-driven backgauge mounted on linear guides with ball screws spindles Backgauge finger blocks mounted on dual linear guides CNC-controlled crowning (anti-deflection system) Tool system Durma Without tools Fiessler AKAS laser safety system mounted on the upper beam Sheet support arms on linear guides Oil fill Operating manual in German or English, including CE Declaration of Conformity Options: Bwsdpfe Agw Sisx Aknjw Z1/Z2 axes, Delta X axis, or 6-axis backgauge Delem CNC control DA-66S or DA-69S CAD/CAM software Bending support system Angle measuring system And much more PRICE FCA TÜRKIYE

Condition: used, Year of construction: 2023, pressure 320 t chamfer lenght 6050 mm distance between columns 5100 mm Bwjdpfx Aezvq Eaeknew stroke 350 mm dayligth 650 mm total power requirement 30 kW weight of the machine ca. 22.500 kg dimensions of the machine ca. 7000x2300x3200 mm The machine is in like-new condition Accessories/Features: - ESA S 875 PC control system - 4 height-adjustable support arms in front of the machine - 2 manually adjustable stop fingers - Light barrier in front of the machine - Foot switch - Crowning - Side safety doors - Controlled axes: y1, y2, x, R, z1, z2 - 1 set of upper and lower tools - Machine in like-new condition

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, operating hours: 5 h, machine/vehicle number: C9100375, control type: NC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: CoastOne, controller model: Touchscreen 15", bending force (max.): 22 t, working width: 900 mm, stroke length: 270 mm, distance between stands: 850 mm, installation height: 470 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, number of axes: 3, type of crowning: manual, overall weight: 1,800 kg, total length: 1,320 mm, total width: 1,220 mm, total height: 2,100 mm, warranty duration: 36 months, pressing force: 22 t, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Compact electric press brake C9 CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS Back stop: 2 axis controlled X-R axes Bending tool holder: Type AMADA Promecam / A / R1 Light work area front 1x set of bending tools included 36 month guarantee after installation Delivery plus; available immediately Viewing under power is possible at any time by appointment! Bodpoz H Tyljfx Aknoww

Condition: used, Year of construction: 2013, pressure 320 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 140 mm/sec work speed 10,5 mm/sec return speed 150 mm/sec work stroke 375 mm dayligth 650 mm table height 900 mm table width 220 mm oil volume 400 ltr. voltage 380 Volt total power requirement 30.0 kW weight 21300 kg range L-W-H 5350 x 2450 x 3150 mm Features: - DELEM DA66T CNC control system - CNC-controlled axes: Y1, Y2, X, R, Z1, and Z2, as well as CNC crowning - FIESSLER AKAS laser safety device in front of the machine (including FPSC) - Rear safety device: light barrier - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components Bwjdpfx Aksz I Dz Aonsw - 2 front support arms - 1 freely movable dual foot control - Upper and lower tools

Year of construction: 2014, condition: good (used), Used quality modern 2014 BYSTRONIC Xcite 80e electric belt driven cnc Press Brake for sale High specification and highly accurate Cnc downstroke pressbrake for sale Bed length 2metre / 2050mm Bsdponr Rrzefx Akneww Year / new: 2014 Model: Xcte 80 e Capacity / tonnage: 80ton Complete Bystronic Byvision touch screen control 5axis back gauge Max stroke 150mm Fully serviced with Bystronic uk

Condition: used, Year of construction: 1992, pressure 0200 t chamfer lenght 3100 mm distance between columns 3000 mm stroke length max. 400 mm feed down 160 mm/sec feed up 140 mm/sec feed under pressure 10 mm/sec oil volume 500 l dayligth 600 mm Control ModEva 12 S Cybelec throat 250 mm Bwodpfxeyy A D So Aknjw total power requirement 28 kW weight of the machine ca. 18,5 t dimensions of the machine ca. 4,5 x 2,7 x 3,4 m Electric hydraulic machine with Cybelec ModEva 12S control, some accessories, foot and two hand switch pane and safety arrangements. Machine has been verhauled and modernized in 2009 !! Machine is floor standing. Machine has 9 controled axes and a Laser controled crowning arrangement.

Condition: used, Year of construction: 2014, pressure 170 t chamfer lenght 3050 mm distance between columns 2550 mm Bwedpfx Ao Advb Hoknsw column arm 405 mm stroke of ram 400 mm distance between table / ram 320-720 mm feed down max. 220 mm/sec feed bending max. 10 mm/sec feed up max. 220 mm/sec connected load 27 kVA total power requirement 18,5 kW weight of the machine ca. 13.600 kg

Condition: used, Year of construction: 1987, pressure 100 t Working width max. 300 mm serial number 55505 Bsdpfx Aozr Rq Ueknoww voltage 380 V weight 5000 kg

Condition: ready for operation (used), Year of construction: 2010, pressure 160 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 400 mm ram stroke speed 200 mm/sec work speed 10.0 mm/min return speed 165 mm/sec work stroke ca. 350 mm dayligth ca. 660 mm oil volume 450 ltr. table height 830 / 950 mm table width 75.0 / 60.0 mm voltage 400 Volt total power requirement 18.5 kW weight 13440 kg range L-W-H 5150 x 2050 x 3150 mm current new price approx. 90.000 euros special price on request ----- ULTIMA PLUS electro-hydraulic press brake with: * increased installation height .. approx. 660 mm * increased cylinder stroke .. approx. 350 mm ----- - in checked condition - machine video - ?v=chgCaXLnpa8 Equipment: - CNC electro-hydraulic die/press brake - CYBELEC CNC control "DNC 880 S" Bwsdpsxaambofx Aknow * swiveling control panel, front right * 2D graphic programming & product display * tool & program library - CNC controlled axes: Y1 + Y2 + X + R axis - CNC electro-motorized back stop, with ball screws (X axis) - CNC electro-motorized Height adjustment of the stop beam (R axis) - 2x manually adjustable back stop fingers (Z axis) - 2x front, movable support arms with T-slot ("Sliding System") - 1x set of bending/insert tools * AMADA / SYSTEM A tool system - Laser protection device in front of the machine - Safety device behind the machine (door) - 1x freely movable foot switch - original operating instructions

Condition: used, Year of construction: 2005, pressure 300 t chamfer lenght 4550 mm distance between columns 4050 mm Bwsdpfx Akez Icy Dsnjw control CYBELEC DNC 1200 PS total power requirement 33 kW weight of the machine ca. 25.500 kg

Year of construction: 2010, condition: like new (used), Used Trumpf Trubend Series 3000 CNC pressbrake for sale VIDEO BELOW: Used Trumpf Trubend 3120 for sale 3metre x 120ton 6 axis plus pressbrake for sale. Brand/make: TRUMPF Model: TRUBEND 3120 Type: CNC hydraulic Press Brakes New 2010 Location: United kingdom Low hours – 14,000 Specification Convert Specs to Imperial Tonnage 119.749 t / 120ton Type: hydraulic downstroke Overall Length 3.1 m /3metre BH 2.7 m Stroke 199.9 mm Number of axis: 7 axis 5 axis back gauge Weight 18298 (LBS) Control CNC (T3000) 132 Ton X 10′ Trumpf TruBend 3120 CNC Press Brake Year: 2010 Specification from new: Machine – Stable machine frame as welded all-steel construction – Ram, highly resistant to torsional forces – Spherical ram suspension, with ram tilt – Electro-hydraulic downstroking drive with 4-cylinder technology – Proportional valve technology – Modern block hydraulics – Electronic pressure balance – Measuring system with glass scale and frame deflection compensation – Hydraulic oil filled in the machine (lifetime lubrication) – Oil cooler Backgauge System – Backgauge system 2-axes with rack and pinion-drive for X- and R-axis, – 2 pieces back gauge fingers with safe adjustment in front of the machine Tool Holder – TRUMPF Upper tool clamping, manual and hardened – Lower tool clamping, manual and hardened Crowning – Self-regulating crowning system – Additional hydraulic CNC-crowning Control – Machine control: T3000 colour, DELEM based on Real Time for Windows – USB interfaces for keyboard, mouse, etc. Safety – Footswitch for Emergency up, down and emergency stop – Safety equipment: Side doors and manual shutter roller at the rear Services – Installation, start-up and instruction Options for Backgauge System – Back gauge system 5 axis Options for Tool Holder – Amada US Style fast clamping of upper tool holders (segmented, on entire working length) Options for Safety Device – BendGuard Options for Material Handling – Support bracket (2 pc) Delivery – June 2011 Video below: Used Trumpf V and C series cnc pressbrakes also available in stock for sale. We are always interested in buying used Trumpf pressbrakes and machines such as: TruBend 3066 TruBend 3100 TruBend 3170 TruBend Series 5000 TruBend 5085 Trubend 5130 TruBend Series 7000 Bwedpfxehtm Iks Aknsw TruBend 7050 TruBend 7036 TruBend 7050 TruBend Series 8000 TruBend 8230 Trubend 8400

Year of construction: 2000, condition: like new (used), Used Edward Pearson pr6 100ton x 4metre multi axis cnc pressbrake for sale Pr6 100/4100 Make: Edwards Pearson Model: PR 6 Pressure Reference Year / new: 2000 Total axis:6 – 4axis back gauge X R Z1 Z2 X1 – recently replaced / new amplifiers Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 100ton Cnc control: Cybelec DNC 1200 PS/B Fully serviced with Bystronic uk – as attached per photo Complete with used tooling yet we can also quote for brand new tooling to fit this machine to produce your steel products. Bwodeg D Uapspfx Aknew Delivery to your factory and installation complete with tuition with your operators can be arranged.

Condition: excellent (used), Year of construction: 2007, Used fully serviced Bystronic AFM EP 100 3metre x 100ton cnc pressbrake for sale: Model: Afm Ewards Pearson 100 Make: Bystronic Year 2007 Cybelec 880S control – popular control Working length mm: 3100mm / 3metre Max. press force kN: 1000 / 100ton Max stroke 200mm Bending cycle 1-10 mm/s Rapid approach 100mm/s Rapid return 95mm/s Bsdpfor T Eruox Aknsww 2 axis back gauge – R and X axis 4 axis in total With crowning Delivery, installation and training can be arranged

Year of construction: 2012, condition: excellent (used), Used modern, very clean & fully serviced Bystronic Xact 160 3metre x 160ton cnc pressbrake for sale: Model: Xact 160 Make: Bystronic Xact Smart 160 Year 2012 Cybelec 880S cnc control Working length mm: 3100mm / 3metre Max. press force kN: 1600 / 160ton 2 axis back gauge – R and X axis 4 axis in total Max.stroke mm: 200 Rapid approach mm/s: 100 Working speed mm/s: 1-10 Bwodpfxon E Tryo Aknsw Return speed mm/s:95 With crowning Weight kg 9800 Machine will come with tooling

Condition: ready for operation (used), Year of construction: 2009, pressure 170 t chamfer lenght 3170 mm distance between columns 2700 mm column arm 420 mm dayligth 620 mm stroke 350 mm ajustment speed 160 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec oil volume 280 L 0 300 bar Bwodozz S D Ispfx Aknjw controlled axis 7 Anzahl Number of working hours ca. 51.500 h total power requirement 16.5 KW weight of the machine ca. 12700 kg range L-W-H 4550 x 2650 x 3150 mm "LONG STROKE" special version Excellent condition (!!) Original price approx. 200.000 Euro Special price on request ----- "LONG STROKE" electro-hydraulic press brake featuring: * Increased daylight opening (installation height) = 620 mm * Increased cylinder stroke = 350 mm ----- Equipment: - Electro-hydraulic CNC press brake - AMADA CNC control "AMNC" - 7 axes (X1+X2, Y1+Y2, R, Z1+Z2) * Swiveling control unit - front left * Touchscreen control panel * Tool & program library * Incl. handheld control unit for manual axis movement - CNC-controlled backgauge adjustment (X1+X2) * Adjustment range .. 700 mm * Adjustment speed .. 500 mm/sec. - CNC-controlled vertical adjustment of gauge fingers (R-axis) * Adjustment range .. 250 mm * Adjustment speed .. 160 mm/sec. - CNC-controlled left-right adjustment of gauge fingers (Z1+Z2) * Adjustment speed .. 1000 mm/sec. - AMADA manual upper tool clamping system * Type: WILSON TOOLS Express * Vertical tool loading/unloading possible * Incl. 1x set of sectional ROLLERI upper tools * "TOP 175.60.R2" ... H 143.8 + 30 mm / 60 degrees - AMADA lower tool holder * Incl. sectional / reversible 4V die * V-openings: 16/32/35/50 mm - FIESSLER laser safety system (front of machine) * Motorized adjustment * Model series: "AKAS III 150" - Side safety guards (swinging doors) - Rear safety guard (swinging door) - 1x movable dual foot pedal - Front emergency stop button - Original operating manual

Condition: good (used), Year of construction: 2019, pressure 220 t chamfer lenght 4100 mm distance between columns 4100 mm stroke of upper beam 400 mm dayligth 570 mm working feed 21.0 mm/sec return speed 200.0 mm/sec work height max. 970 mm Control LVD Touch-B CNC 18" total power requirement 37.0 kW weight 27500 kg range L-W-H 5100 x 1950 x 2850 mm well-maintained condition (!!) Special price on request Equipment: - CNC electro-hydraulic press brakes * Intuitive, touchscreen-based user interface Bwedpfx Akjzu A Rxenow * Simple navigation * Tool and program library * X-axis control and position display * Y-axis control and position display * Swiveling control panel (front left) - CNC-controlled - CNC electric backgauge (X-axis) * CNC electric gauge fingers (R-axis) * Includes height adjustment (R-axis) * Intelligent tool storage (automatic tool changing) * Bending aid - LVD upper tool holder * Hydraulic upper tool clamping - LVD lower tool holder * Hydraulic die clamping - Side safety guards (swiveling doors) - Rear safety guard (swiveling door) - 1x movable foot pedal - Machine documentation ToolCell is a fully equipped hydraulic press brake with an integrated automatic tool changer. It is the ultimate bending solution for small to medium-sized batches, high product variety, and increased workpiece complexity.

Condition: used, Year of construction: 2019, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable 500 mm control DA 66T oil volume 150 ltr. voltage 380 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm current new price approx. 65.000 euros very rarely used! Special price on request - in checked condition - machine video - ?v=KRifrqTgkVU ----- SPEED BEND PRO CNC press brake: * increased installation height * increased cylinder stroke * and increased bending beam speeds ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-66T" graphics/touchscreen Bedpfx Ajzlulpokneww * 2D graphic touchscreen programming mode * 3D representation in simulation and production * 17" color TFT screen with high resolution * Bending sequence calculation * Product programming and representation in actual size * USB interface - CNC controlled axes: Y1 - Y2 - X - R - CNC electro-motorized back stop (X axis) * on ball screws * Travel path .. 500 mm * Travel speed .. 500 mm/s * with 2x manually adjustable stop fingers - CNC electro-motor height adjustment (R axis) * Travel path .. 250 mm * Travel speed .. 350 mm/s - AMADA/PROMECAM upper tool holder * including clamping jaws with upper wedge camber * 1x ROLLERI split set 60° upper tool - AMADA/PROMECAM lower tool holder * including 1x die shoe "C 1050-R" * 1x AMADA 1-V die 85° - Safety device at the rear (door including safety switch) - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser protection device in front of the machine - 2x front support arms with SLIDING system (HIWIN plain bearings) - 1x freely movable double foot control - CE mark / Declaration of conformity - Operating instructions including circuit and hydraulic diagram

Condition: good (used), Year of construction: 1999, pressure 135 t chamfer lenght 3600 mm distance between columns 3150 mm stroke of upper beam 200 mm ajustment speed 70.0 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec 315 bar dayligth 400 mm table height 915 mm column arm 250 mm engine output 15.0 kW weight 8800 kg range L-W-H 4200 x 1700 x 2600 mm Equipment: Bjdoz Dkznjpfx Akneww - Electro-hydraulic press brake * with torsion bar - HACO NC control (Model ATL 550) for X and Y axes * Computer-controlled multi-axis NC press * Backgauge position pre-selection (electric backgauge) * Backgauge retraction for Z-bends * Bending depth pre-selection * Electric depth adjustment * Memory for 200 programs - Swiveling control panel (front left) - NC motorized backgauge (X-axis) * with 2 manually adjustable stop fingers - NC motorized depth adjustment (Y-axis) - 1x set of sectionalized "gooseneck" (swan-neck) upper tools - 1x rotatable MULTI-V die block - Rear safety guard (sliding door) - 1x mobile two-hand/foot control unit - 2x front support arms (custom-made) - Operating manual