Used Pres Brake for sale (28,422)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, pressing force: 80 t, stroke length: 290 mm, operating speed: 90 mm/s, table height: 950 mm, throat depth: 1,000 mm, total length: 3,450 mm, total width: 1,820 mm, total height: 2,510 mm, overall weight: 6,800 kg, controller manufacturer: Safan, controller model: TS1, working width: 2,550 mm, bending force (max.): 80 t, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 2,700 mm, installation height: 1,050 mm, warranty duration: 3 months, control type: CNC control, actuation type: electric, Equipment: documentation/manual, emergency stop, foot remote control, safety light barrier, SAFAN E-Brake Press Brakes are a series of machines equipped with electric drives. Lenze servo motors, controlled by inverters from the same manufacturer, enable fast and reliable system performance over many operating hours. Additionally, the machine only consumes electrical energy during the downward stroke of the ram. The upward movement of the ram is achieved by the force of springs. During standby, the energy consumption is minimal, as there is no hydraulic pump motor maintaining pressure, unlike hydraulic press brakes. Power consumption is estimated to be up to 70% lower than with conventional hydraulic press brakes. SAFAN E-Brake Servo-Electric Press Brake Force: 800 kN (80 tons) CNC Controlled Axes: Y1-Y2-X-R-Z1-Z2 Ram Stroke: 290 mm Open Height (Daylight): 590 mm Upper Beam Approach Speed: 90 mm/s Upper Beam Accuracy: +/- 0.01 mm Maximum Backgauge Finger Speed: 350 mm/s Maximum Backgauge Range (third reference point, X-axis): 1000 mm Hydraulic Upper Tool Clamping: WILA Connected Load: 11 kW Machine Weight: 6,350 kg Machine Width: 3,450 mm Machine Depth: 1,820 mm Machine Height: 2,510 mm Power Supply: 3/N/PE 50Hz – 400/230V Servo-electric drive (no hydraulic system) Drive transmission via belts Fodjut S E Nepfx Akysgh

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, pressing force: 86 t, stroke length: 215 mm, overall weight: 7,300 kg, TECHNICAL DETAILS Pressing force: max. 850 kN Stroke: max. 215 mm Operating pressure: max. 300 bar Follow-up time: max. 95 ms Follow-up travel at 220 mm/s: max. 10 mm Follow-up travel at 160 mm/s: max. 8.5 mm Safety distance: min. 190 mm Fsdpfjz Hvgzjx Akysgh MACHINE DETAILS Voltage: 3 × 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Control voltage: 24 V DC Compressed air connection: 6 bar Weight of the press: 7,300 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, operating hours: 23,390 h, pressing force: 85 t, overall weight: 8,600 kg, controller model: TASC 6000, operating pressure: 300 bar, TECHNICAL DETAILS Pressing force: 85 t Pressing force: 850 kN Operating pressure: 300 bar MACHINE DETAILS Control system: TASC 6000 Control voltage: 24 V Follow-up time: 95 ms Follow-up distance at 220 mm/s: 10 mm Follow-up distance at 160 mm/s: 8.5 mm Safety distance: 190 mm Voltage: 3 × 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Compressed air connection: 6 bar Dimensions & Weight Dimensions (L × W × H): 2,500 × 1,500 × 2,000 mm Fgjdpez Hxtdsfx Akyoh Machine weight: 8,600 kg Operating hours, hydraulics: 23,390 h

Condition: used, CNC press brake WEINBRENNER, type EGP 80 Die-bending machine (DEFECTIVE) Fjdez A Ia Sopfx Akyogh Serial No. 1257G, Year of manufacture 1991 Press force 80 tons Working length 1300 mm Stroke 260 mm with Cybelec DNC 94 PS with back gauge Weight 8800 kg without tools, tooling system probably TRUMPF Machine is not functioning, control system does not boot up. The parameters are probably lost.

Condition: ready for operation (used), Year of construction: 1962, machine/vehicle number: E 557, functionality: fully functional, pressing force: 40 t, stroke length: 125 mm, table width: 400 mm, table length: 1,000 mm, overall weight: 3,900 kg, No minimum price – guaranteed sale to the highest bidder! Fgodpfsz Izdnjx Akyoh TECHNICAL DETAILS Press force Max. press force: 40 t Stroke: 125 mm Max. operating pressure: 15.7 MPa Installation height: 650 mm Stand extension: 400 mm Ram adjustment: 125 mm Work table Table length: 1,000 mm Table width: 400 mm MACHINE DETAILS Machine type: Hydraulic press brake Type: E 40-1000 Year of manufacture: 1962 Factory number: E 557 Total weight: 3,900 kg Condition: Used, fully functional

Condition: used, Year of construction: 2007, functionality: fully functional, FINN-POWER E-BRAKE 200-4100 TS 1 Fully operational servo-mechatronic press brake, supplied with WILA tooling. ⚙️ Bending force: 200 t / 2000 kN Fgodez Nx Nfspfx Akysh 📏 Working length: 4100 mm 📅 Year: 2007 ⚡ Servo-mechatronic drive – no hydraulics 🛠️ WILA tooling included The machine is in working condition and available for inspection and test bending. 📍 Location: Tukums area, Latvia For further information, photos or videos, please contact us.

Condition: good (used), Year of construction: 2008, TruBend 5085 press brake Fjdpfey Shc Djx Akyegh

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electricity performance: 37,5weight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE!CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) (Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled Fgsdpfx Akjvfy Sxjyeh 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards new pump installed The machine is being sold in its current condition. The machine was purchased from an insolvency sale and transported to our warehouse. The basic up and down functions have been tested and are working. Apart from that, we have no further information regarding the technical condition or overall functionality of the machine. An on-site inspection can be arranged upon request. The machine is sold as is, without any warranty or guarantee. One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electric current: 37,5 KWweight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE! CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons)(Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Fedpfx Aksv Rtg Tsyegh Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards new pumpt installed The machine is being sold in its current condition. The machine was purchased from an insolvency sale and transported to our warehouse. The basic up and down functions have been tested and are working. Apart from that, we have no further information regarding the technical condition or overall functionality of the machine. An on-site inspection can be arranged upon request. The machine is sold as is, without any warranty or guarantee. One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: used, Year of construction: 1989, functionality: fully functional, overall weight: 50,000 kg, working width: 8,000 mm, bending force (max.): 400 t, control type: CNC control, Eccentric press from HACO, model PPES 70400, year of manufacture 1989. The machine has a nominal pressing force of approx. 400 tons and is suitable for various pressing and forming operations on sheet material. Equipped with a mechanical eccentric drive and robust construction, designed for industrial use. Suitable for production and assembly work in an industrial environment. Machine is offered in used condition. Fodeyhxtzjpfx Akyogh

Condition: used, Year of construction: 2014, total length: 1,500 mm, total width: 1,150 mm, total height: 2,400 mm, Weight: 3.600 kg - Year: 2014 - Documentation available: Yes Fgjdpfx Aoxapftokyoh - CE marking present: Yes - CE certificate present: No - Serial number: 441 - Power [kW]: 3.0 - Press force [ton]: 28 - Max. working width [mm]: 1000 - Column gap [mm]: 950 - Throat depth [mm]: 220 - Backgauge depth [mm]: 415 - Transport dimensions: 1500mm x 1150mm x 2400mm (l x w x h) - Transport weight [kg]: 3600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2015, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 55 Hz, type of input current: three-phase, pressing force: 160 t, stroke length: 200 mm, table width: 200 mm, table length: 3,200 mm, throat depth: 320 mm, clearance between the columns: 2,530 mm, retraction force: 160 t, oil tank capacity: 200 l, total length: 3,280 mm, total width: 2,700 mm, total height: 2,000 mm, overall weight: 11,500 kg, Equipment: CE marking, documentation/manual, We offer a used Metal Technics 3200/160 E200 press brake, manufactured in 2015. The press is currently in operation in a production environment. It operates in an intermittent cycle, in a single-shift mode – 8 hours. Oil is changed regularly. Equipment: PRESS BRAKE Model: 3200/160 E200 Serial number: 48342 Year of manufacture: 2015 Motor power: 11 kW Weight: 11500 kg Includes tooling (punches and rotating die). Punch mounting type: Amada. Equipped with light curtains and two backstops. If you have any questions or require additional information, please send a message or contact us by phone. Fsdpfx Ajy Um S Nskyegh

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, stroke length: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, table length: 3,200 mm, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, overall weight: 8,000 kg, bending force (max.): 1,000 t, bending angle (max.): 90 °, warranty duration: 24 months, working height: 450 mm, All-Electric Servo Bending Machine Nominal force(KN): 1000 Slider stroke(mm): 200 Throat depth (mm): 360 X-axistravel(mm): 600 R-axistravel(mm): 200 Z-axistravel(mm): 2500 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. Fodpfsv Hchljx Akyegh 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending!

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, input voltage: 380 V, input current: 13 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 50 t, overall weight: 50,000 kg, working width: 2,500 mm, For sale is a GÉFI LE50/2500, Hungarian-made edge bender in excellent condition, in working condition, can be tested. Technical data of the pres brake : Manufacturer: GÉFI Fjdpfx Aksyznhlsyjgh Type: LE 50/2500 Year of manufacture: 1983 Pressing force: 50 tons Maximum bending length: 2500 mm Dimensions: 2720x1550x2245 mm Weight: 5500 kg We are adding 1 1500 mm and 1 2500 mm knife, these need to be renovated.

Condition: like new (used), Year of construction: 2022, pressing force: 100 t, A well-maintained and regularly serviced TRUMPF press brake is available. Number of strokes: approximately 860,000. The machine is in continuous operation, so it can be inspected and tested at our facility. The stated price is the net amount. Fjdpfev E Nvaox Akyogh

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 100 t, stroke length: 200 mm, operating speed: 140 mm/s, reverse speed: 130 mm/s, table width: 60 mm, table length: 3,200 mm, table height: 850 mm, throat depth: 500 mm, ram plate width: 50 mm, ram plate length: 3,200 mm, distance table to ram: 460 mm, clearance between the columns: 2,700 mm, retraction force: 10 t, oil tank capacity: 230 l, total length: 3,800 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 7,300 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine tool is designed and manufactured with the latest technology, ensuring its strength, rigidity and safety performance. It adopts an integral high-quality steel plate welded structure with a heavy-duty and high-rigidity frame. The machine surface is coated with imported anti-rust primer and topcoat, keeping the equipment in good condition permanently. The machine tool is mainly composed of the frame, upper slide, backgauge system, slide block and synchronous control device, dies, hydraulic system, control system and other components. Product detail display Frame Section It adopts a frame-type structure, consisting of worktable vertical plates, left and right side plates, and connecting beams. It is integrally welded with steel plates, featuring high rigidity, high strength and excellent resistance to torsional deformation. Internal stress is eliminated through processes such as surface shot blasting, ensuring long-term stability of the overall machine precision. During bending, the deformation of the upper slide and worktable is minimal, which guarantees excellent straightness and angular consistency of workpieces. Die and Clamping Device It is composed of upper and lower dies, featuring high precision, premium quality and long service life. The upper die is mounted on the slide block, securely fixed by a precision quick-release clamping device. The lower die adopts a dual-V concentric design, allowing for fast and convenient die changeover, effectively reducing operator labor intensity, and significantly improving overall production efficiency.device. The lower die adopts dual V concentric design, enabling fast and convenient die change, reducing intensity and improving efficiency. Throat Opening Deflection Compensation Device A linear encoder is installed on each side of the machine to measure and feed back the precise distance between the slide block and the lower worktable. The encoders are connected to the worktable via C-frames, effectively eliminating the influence of frame throat deformation on the slide block position. Position data is fed back to the CNC system, which outputs signals to control the hydraulic proportional servo valves, ensuring accurate synchronization of the two cylinders. Fedpfxoy Uc Nko Akyjgh Backgauge System Adopts the latest Belgian-designed backgauge for exceptional precision and stability. Driven by servo motors and ball screws, it delivers high speed and outstanding positioning accuracy. The unique dual linear guide rail structure ensures excellent long-term repeatability. Multi-stage positioning expands the working range, offering superior value for investment. Modular design allows axis configuration from single-axis X to multi-axis options. Mechanical Compensation Device Adopts an integrated mechanical compensation wedge block, motor-driven for precise adjustment. It automatically fine-tunes the worktable alignment, offsetting deflection caused by bending forces. The system ensures consistent precision along the entire length of the workpiece. It provides reliable, repeatable adjustment, eliminating the need for manual correction, and significantly improving bending accuracy.

Condition: good (used), Year of construction: 2016, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 170 mm, operating speed: 10 mm/s, reverse speed: 170 mm/s, table width: 90 mm, table length: 1,270 mm, table height: 850 mm, throat depth: 350 mm, clearance between the columns: 1,050 mm, oil tank capacity: 80 l, total length: 2,150 mm, total width: 1,650 mm, total height: 2,300 mm, overall weight: 3,250 kg, year of last overhaul: 2025, Equipment: CE marking, safety light barrier, 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake – 6 Axis – Delem DA-66T Control Used 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Delem DA-66T graphic control, Y1, Y2, X, R, Z1 and Z2 axes, tooling, laser guards. Manufacturer: Ermaksan Model: Speed-Bend(SB) Pro 1270 x 40 Axes: 6 Year: 2016 Capacity: 1270mm x 40T Control: Delem DA66T Description 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake, a compact, high-quality 6-axis CNC hydraulic press brake ideal for precision sheet metal bending, fabrication workshops, engineering companies and production environments. Fgedezdak Aspfx Akyoh This Ermaksan Speed-Bend Pro 1270 x 40 offers a bending length of 1270 mm and a bending power of 40 tonnes. It is fitted with a Delem DA-66T graphic CNC control, providing a clear touch-screen interface for accurate programming, bend sequence calculation, tooling setup and repeatable production bending. The machine is in good condition. It comes complete with Euro-style top and bottom press brake tooling, laser guards, foot pedal, quick-release top tool clamps and rear safety doors, making it a well-equipped used press brake ready for immediate inspection and production use. This is a superb opportunity to purchase a late-model, compact Ermaksan CNC press brake with a desirable 6-axis specification, ideal for companies looking for a reliable used hydraulic press brake in Ireland, the UK or Europe. Key Features Manufacturer: Ermaksan Model: Speed-Bend Pro 1270 x 40 / SB PRO 1270-40 Year: 2016 Type: CNC hydraulic press brake Bending length: 1270 mm Bending power: 40 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Delem DA-66T Graphic CNC Control Condition: Good condition Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications – SB PRO 1270-40Model: SB PRO 1270-40 Bending length: 1270 mm Bending power: 40 tonnes Distance between columns: 1050 mm Y-axis rapid speed: 140 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 170 mm/s X-axis travel: 500 mm X-axis speed: 500 mm/s R-axis travel: 250 mm R-axis speed: 350 mm/s Z1 / Z2-axis travel speed: 1000 mm/s Backgauge finger blocks: 2 Oil capacity: 80 litres Motor power: 5.5 kW Stroke: 170 mm Daylight: 387 mm Throat depth: 350 mm Table height: 850 mm Table width: 90 mm Machine Dimensions: 2150 x 1650 x 2300mm Machine weight: 3250 kg Standard / Included Equipment This used Ermaksan Speed-Bend Pro press brake is supplied with: 6 CNC axes: Y1, Y2, X, R, Z1 and Z2 Delem DA-66T graphic CNC control Euro-style top press brake tools Euro-style bottom press brake tools Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Backgauge finger blocks Sheet support arms Notes: *Specifications are given in good faith but not guaranteed*

Condition: refurbished (used), Year of construction: 1979, For 75T working length 2500mm Fedsxwxg Iopfx Akyogh

Condition: used, Year of construction: 2015, functionality: fully functional, operating hours: 170 h, pressing force: 320 t, working width: 5,100 mm, degree of automation: automatic, Equipment: emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, TOSKAR press brake Pressure 320 tons Bending length 5100mm Bending length between columns 4100mm Fjdjwq Aa Iopfx Akysgh Speed of approach movement 100 mm/s Speed of bending movement 9 mm/s Speed of return movement 100 mm/s Opening 300 mm Distance to columns 500mm Year 2015 Only 170 working hours 5 Axes Y1, Y2, X, R, deflection arrow CNC controller with NexT touch screen

Condition: good (used), Year of construction: 2012, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 55 t, Durma IW 55 Combination Machine (Punching and Shearing) For sale: a Durma IW 55 combination machine (punching machine + ironworker-type shear), with a capacity of 55 tons. Well-maintained, fully operational, and available for inspection at our facilities in Zaragoza, Spain. Manufacturer: Durmazlar (Turkey) Type: IW 55/110 Motor: 5.5 kW, three-phase, 50Hz Operating voltage: 400V — Control voltage: 24V Current: 11.5 A — Fuse: 16A Cutting capacities: L-profile at 90° 120x120x10mm, L-profile at 45° 70x70x7mm, flat bar 300x15mm, round bar Ø40mm, square bar 40mm, punching Ø40x10mm Material capacity: up to 45 kg/mm² (65,000 psi) Includes punching and die tooling For technical inquiries or to arrange a visit, please contact us by email. Price: €6,500 (negotiable), VAT not included. Fgodpez Hla Dofx Akyeh If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 175 t, stroke length: 275 mm, operating speed: 12 mm/s, reverse speed: 190 mm/s, table length: 3,100 mm, table height: 900 mm, throat depth: 410 mm, distance table to ram: 550 mm, clearance between the columns: 2,600 mm, oil tank capacity: 300 l, total length: 5,025 mm, total width: 2,150 mm, total height: 2,680 mm, overall weight: 9,086 kg, Equipment: CE marking, documentation/manual, safety light barrier, 2022 Ermaksan Speed-Bend PRO 3100x175 CNC Press Brake 2022 Ermaksan Speed-Bend PRO 3100x175 CNC press brake in very good condition. 175T x 3100mm, 6 axis, Delem DA66TX, CNC crowning, laser guards, generous tooling package included. Machine Manufacturer: Ermaksan Model: Speed Bend Pro 3100 x 175T Machine Type: 6 Axis CNC Pressbrake Capacity: 3100 x 175T Year: 2022 Control: Delem DA66TX Condition: Very Good Description Ermaksan Speed-Bend Pro 6 Axis CNC Hydraulic Press Brake with Delem DA66TX Control. Available now, this 2022 Ermaksan Speed-Bend PRO 3100x175 CNC Press Brake is a high-quality, modern hydraulic press brake in very good condition. This is a 6 axis machine with Y1, Y2, X, R, Z1 and Z2 axes, fitted with a Delem DA66TX CNC control, pneumatic top tool clamping, CNC crowning, laser guards, wanderer type foot pedal, and supplied with generous selection of top and bottom tooling. Ideal for sheet metal fabrication, precision bending, stainless steel work, mild steel fabrication, aluminium bending, agricultural fabrication, general engineering and production workshops. Key Features 2022 Ermaksan Speed-Bend PRO 3100x175 175 tonne bending capacity 3100mm bending length 6 axis CNC press brake Y1, Y2, X, R, Z1 & Z2 axes Delem DA66TX CNC control Pneumatic top tool clamping Package of Top and bottom tooling included CNC / motorised crowning Laser safety guards Wanderer type foot pedal Very good condition Excellent machine for fabrication and production bending work Capacity & Main Machine Data Manufacturer: Ermaksan Model: Speed-Bend PRO 3100x175 Year: 2022 Machine Type: CNC hydraulic press brake Bending Length: 3100mm Bending Force: 175 tonnes Distance Between Columns: 2600mm Axes: Y1, Y2, X, R, Z1, Z2 Crowning: Motorised / CNC crowning Backgauge Finger Blocks: 2 Speeds & Axis Travel Y Rapid Speed: 180mm/s Y Working Speed: 12mm/s Y Return Speed: 190mm/s X Axis Travel: 800mm X Axis Speed: 500mm/s R Axis Travel: 250mm R Axis Speed: 350mm/s Z1 / Z2 Axis Travel Speed: 1000mm/s Stroke, Daylight & Frame Stroke: 275mm Daylight: 550mm Throat Depth: 410mm Table Height: 900mm Table Width: 90mm Power, Size & Weight Oil Capacity: 300 litres Motor Power: 15kW Approx. Length: 5025mm Approx. Height: 2680mm Approx. Width: 2150mm Approx. Weight: 9086kg Delem DA66TX CNC Control Control Features Include 2D graphical touch-screen programming High-resolution colour TFT display Automatic bend sequence calculation Collision detection 3D machine setup with multiple tool stations USB / peripheral interfacing Product and tool memory Profile-TL offline software support User-friendly Delem touch navigation Fedpfoz Dn Huox Akyegh Delem’s DA-66T platform is listed by Delem as a 2D graphical press brake control with automatic bend sequence calculation, collision detection, full 3D machine setup, USB interfacing, 17" high-resolution colour TFT display and Profile-TL offline software support. Included Equipment Pneumatic top tool clamping Lots of Top tooling Lots of Bottom tooling CNC crowning Laser guards Wanderer type foot pedal 6 axis CNC backgauge system Delem DA66TX control Typical Applications Sheet metal fabrication CNC press brake bending Mild steel bending Stainless steel bending Aluminium bending Box and pan type components Architectural metalwork Agricultural fabrication General engineering workshops Production bending work

Condition: excellent (used), Year of construction: 2023, power: 11 kW (14.96 HP), pressing force: 220 t, stroke length: 3,100 mm, throat depth: 650 mm, total length: 4,500 mm, total width: 2,200 mm, total height: 3,100 mm, overall weight: 16,200 kg, Press brake DURMA - AD-SERVO 30220 MACH-ID 9836 Make: DURMA Type: AD-SERVO 30220 Control: Delem DA69-T YOP: 2023 New 2023 very little working hours ! Hydraulic top and lower clamping CNC Crowning DAM Laser Measuring and Angle correction system Delem DA69-T 3D graphical controller Component Backagauge with R and Z Axis   Under power ! New EUR 120.000 Max. bending length: 3050mm Distance between column: 3100mm Max. pressing force: 220T Adjustment X-Axis back gauge:650mm Number of controlled axis: 4 Power: 11kW Length: 4500mm Fgsdpfxjz Nwzto Akyeh Width: 2200mm Height: 3100mm Weight: 16200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2020, functionality: fully functional, operating hours: 183 h, controller manufacturer: CYBELEC MODEVA BAC 2D Control, controller model: CYBELEC MODEVA BAC 2D Control, working width: 4,000 mm, bending force (max.): 290 t, control type: CNC control, Equipment: documentation/manual, BOSCHERT G-Bend Plus 4290 Fgedpfx Ajywfp Sekysh

Condition: ready for operation (used), Year of construction: 2001, Immediately available, free of encumbrances: Trumpf Truma Bend V 50 press brake Fsdpfx Aez Ixp Iokyjgh Year of manufacture: 2001 Control system: Delem Pressing force: 50 tons Bending length: 1200 mm Working width: 1280 mm Stroke: 215 mm Complete cladding Foot pedal operation Weight: 6 tons Price: EUR 8,750.00 plus VAT, ex works.

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: B0501A0285, functionality: fully functional, operating hours: 6,560 h, input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 50 t, stroke length: 215 mm, operating speed: 220 mm/s, reverse speed: 220 mm/s, table width: 100 mm, table length: 1,275 mm, table height: 950 mm, throat depth: 420 mm, clearance between the columns: 1,040 mm, total length: 2,190 mm, total width: 1,740 mm, total height: 2,375 mm, overall weight: 4,900 kg, Equipment: CE marking, documentation/manual, safety light barrier, I am offering my well-maintained TruBend 5050 for sale. It has no defects, no quirks, and no hidden costs. You are welcome to inspect and test it at any time. I can also take care of the loading. The setup is also not complicated. The buyer is responsible for arranging the shipping. This machine is being offered for sale solely for tax-related reasons. We do not need to and, above all, do not want to sell it below its market value, as it is very reliable and we have grown attached to it. Anyone who is genuinely interested is welcome to contact me. And yes, these are the original operating hours. Nothing has been replaced, falsified, or anything of that nature. The machine has been used very little by both the previous owner and us. The last maintenance was some time ago, but everything else is in absolutely original condition. From the operating manual to the last screw. Fjdpfx Aozlutaskyjgh