Used Press brakes with 150-199t bending force for sale (179)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 47,052 h, Functionality: fully functional, machine/vehicle number: B0505A0010, pressing force: 170 t, working length: 3,000 mm, stroke distance: 445 mm, TECHNICAL DATA Bending length: 3,000 mm Press force: 170 t Stroke (long stroke): 445 mm Drive and control system WILA hydraulics: top and bottom Backgauge: 6 axes MACHINE DETAILS Operating pressure: max. 300 bar Stop time: 95 ms Voltage: 3×400 V Rated current: 38.0 A Frequency: 50 Hz Connected load: 26.0 kVA Control voltage: 24 V Compressed air connection: 6 bar Press weight: 12,200 kg Operating times Machine on: approx. 73,037 h Hydraulics: approx. 47,052 h Press beam: approx. 5,200 h Strokes: approx. 2,817,583 Cgjb E T R Sjwa T E Hjkot Crown: 575 h / 962,704 cycles EQUIPMENT - Laser light barrier - Die shift - 2x support arms Last service performed: 10/2023

Condition: good (used), Year of construction: 1995, Functionality: fully functional, pressing force: 200 t, throat depth: 250 mm, overall weight: 20,000 kg, bending length: 4,100 mm, Hämmerle BM200-4100. The machine was dismantled at the old factory in 2023, but was never reassembled and put into operation at the new one. Since then, the machine has been in storage. All accessories and documentation are included. The machine can be inspected at any time and is immediately available for loading. All data is included in the pictures... Cgob Eswa S Dne T R Skst

Condition: used, Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 122085, pressing force: 150 t, overall weight: 14,000 kg, distance between side stands: 3,100 mm, working length: 3,650 mm, Darley EHP 150 36/31 CNC Press brake. Machine purchased new in 2001 and always maintained by Darley. The machine has a 6-axis stop system and is equipped with crowning. The bottom tool holder is an LVD system. Cgjb Ejway Nfe T R Skot The top tool holder is a Wila system. Due to the purchase of a new press brake, this machine is no longer needed.

Condition: new, pressure: 160bending length: 3200column width: 2655daylight: 400motor: 11slide stroke - max.: 200repeat accuracy: 0,015precision of position: 0,10CNC Press Brake 3200 mm x 160 t Standard Equipment:Sturdy construction for high stability and precision. CNC Axes: Y1, Y2, X, and R axes for precise control and accurate bending operations. Cgsb Esv S Npye T R Skjt Motorized CNC crowning device with CNC control for precise adjustments. CNC control system from the manufacturer (similar to Delem) for user-friendly operation and high flexibility. Back gauge with linear guide and ball screw, equipped with 4 back gauge fingers for precise material positioning. 2 sheet metal support arms for ergonomic handling of the material. Laser protection device on the upper beam to ensure safety during operation. Quick clamping for upper tooling for fast and easy tool change. Upper tooling system: Promecam Amada, split and offset for maximum flexibility. Multi V die system: Both Promecam and Amada systems are compatible. CE safety equipment to comply with all relevant safety regulations.

Condition: used, pressure 150 t chamfer lenght 4300 mm Cgeb E Tsv S Irye R Skot distance between columns 3700 mm ram stroke speed 100 mm/sec working feed 8 mm/sec return speed 80 mm/sec stroke 175 mm table height 920 mm Control DELEM DA 52 total power requirement 11 kW weight of the machine ca. 15000 kg dimensions of the machine ca. 4800 x 1700 x 2850 mm

Condition: new, The AHK V CNC series models fulfill the most demanding requirements for modern press brakes according to European standards. These models were developed with advanced design technology and built on modern production lines resulting in superior quality, precision and reliability. All AHK V CNC series models feature a DELEM graphical touchscreen that provides efficient CNC programming tools and control over the entire bending process. Various back gauge options are available so these press brakes easily can be adapted for a wide spectrum of requirements. Cgob E Tsvn Nnuo R Sket

Condition: excellent (used), Year of construction: 1993, operating hours: 53,000 h, Functionality: fully functional, total height: 3,350 mm, pressing force: 160 t, bending length: 4,050 mm, throat depth of stand: 3,550 mm, stroke distance: 500 mm, For sale: 1 used hydraulic press brake Cgeb E T Rsrk Aads Skot Manufacturer: Weinbrenner type: GP160 YEAR OF MANUFACTURE: 1993 Pressing force: 1.600kN working length: 4.050mm Clear stand width: 3,550mm Stroke: 500mm Control system: Cybelec Operating hours: 52,300 Incl. extensive tools, see contents blue shelf (shelf itself is not sold). Several folders of documentation available for the machine, Elt plans, Cybelec control,... Very well maintained condition. Machine can be inspected in our warehouse in 09599 Freiberg.

Condition: used, Year of construction: 2019, pressure 100 t chamfer lenght 3050 mm distance between columns 3250 mm Control Delem DA 66T stroke y-axis 300 mm dayligth 590 mm ajustment speed 75 mm/sec Bending Speed 20 mm/sec. backward speed 75 mm/s total power requirement 11 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 4,3x2,0x2,9 m Demonstration machine Y1 / Y2 servo electronic Hydraulic stamp clamping (WILA Premium) Hydraulic die clamping (WILA Premium) including motorized crowning Back gauge system "DENER" X-; R-; Z1-; Z2- axis FIESSLER AKAS LC II M Typ 4 (manual adjustment)with box bending Csbsv R Hvne E T R Skegt Rolleri quick-change tools segmented: Punch TPR200.28.R1, die TMR100.12.30 total 3.050 mm length

Condition: used, Year of construction: 2019, Functionality: fully functional, pressing force: 100 t, working length: 3,000 mm, CNC Press brake 160 Ton X 4 meter 3 Axis Cybelec Controller Services in whole europe, Gulf & India available. Cgsb Ejv Nzcys T R Skst

Condition: new, Year of construction: 2024, Make: DURMA Type: AD-S 30175 Year of construction: 2020 Folding length: 3050 mm Pressing force: 1750 kN Control: CNC DT-15 Operating hours: 33 h Bcq29blmc8 Controlled axes back gauge: X,R Clearance between the uprights: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Cgeb Eod Srk Ss T R Skot Table height: 900 mm Stand projection: 410 mm X-axis travel range: 650 mm Traversing speed X-axis: 250 mm/s Infeed speed: 160 mm/s Folding speed: 10 mm/s Retraction speed: 100 mm/s Dimensions L/W/H: approx. 4250x1700x2750 mm Weight: approx. 11500 kg Standard equipment Y1,Y2, X=650 mm Control: CNC DT-15 European die clamping system 60 mm die holder (only for European die system) 2 support arms movable from the front with linear guide along the entire length Servo motor backgauge Safety covers on the side CE marking Extended equipment Safety system CE with manual FIESSLER AKAS II M-FPSC- Controlled axes X,R-axis, Z-axes manually adjustable CNC controlled motorized crowning European upper tool/lower tool from Rolleri The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: used, pressure 200 t chamfer lenght 3100 mm distance between columns 2750 mm stroke 400 mm throat 300 mm oil volume 330 l total power requirement 18,5 kW weight of the machine ca. 18500 kg dimensions of the machine ca. 4300 x 2400 x 3600 mm Cgob E T Rov S Irmj Skot

Condition: used, Price: On request Press brake Model: CNC Model: Electric Manufacturer: Safan Type: SMK 40-2050 / E-Brake Controller Retrofit: Delem DA-53T Capacity: 40t Max. working width: 2050mm Controlled axes: Y1/Y2 - X Machine-dimensions: 2650x1750x2600mm Cjbov Ul N Uj E T R Skjgt Machine-weight: 5000kg - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Press brake Darley EHP 150.43/37 4.3 meter press brake length 150 tons press force Csbetthlfe E T R Skjgt Delem DA53T - Year 2022 LxWxH: 4420x1420x2935 mm

Condition: good (used), Year of construction: 1989, Functionality: fully functional, Hydraulic press brake Ceb E Tjv Rcc Re R Sksgt AMADA STPC 160/30 Yom 1989 CNC Controller DNC 7000 Max Cap : 1600kN Working length : 3000mm tooling included

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, pressing force: 150 t, bending length: 4,100 mm, nominal pressure: 1,500 N, working range: 4,100 mm, Used high quality very accurate Edwards Pearson PR6 150/4100 CNC Pressbrake for sale New / Year 2002 Total axis: 6 axis complete with Crowning Capacity: 4.1m x 150ton / 4100mm x 150ton Fully serviced Very late Pr machine before Bystronic pressbrakes Cob E T R Sov Ub Eljkjgt Complete with with: Cybelec CNC Control with Colour Graphics  Y1, Y2, X, R, Z1, Z2 Max stroke 215mm Sick Infrared Lightguards Full Top and Bottom Tooling Has come from a company that manufacture’s for the architectural sector and has mainly been folding aluminium New tooling to fold your products on this press available Can be seen working

Year of construction: 2024, Condition: new, The DA-69T controller offers both 2D and 3D programming, which includes automatic calculation of the bending sequence and collision detection. The entire 3D machine setup includes multiple tool stations and provides immediate feedback on the feasibility and handling of the product. Delem-69T properties: - 3D and 2D graphic touch screen programming mode - 3D representation in simulation and production - 17-inch TFT colour display with high resolution - Complete Windows Application Suite - Compatible with Delem Modusys (module scalability and adaptivity) - USB, peripheral interface - Open system architecture - Bending and correction interface sensor - Profile-T3D offline software - great contribution to environmental protection, climate change and the greenhouse effect will thank us, the next generation will thank us too! AD-S 30175 with Y1, Y2, X and R axis Bending force: 175 tons bending length: 3050mm Passage between stands: 2600mm Rapid speed: 120 mm / sec working speed: 10mm / sec Speed of the return: 100 mm / sec Installation height of tool passage and the penetration depth of your press brake: 30mm table width: 104mm table height: 900mm stroke: 265 mm Projection: 410 mm Support arms: 2 pcs. Stop finger: 2 pcs. Press force and speed of the press brake. X - axis: 500 mm / sec x-axis travel direction 650mm Speed R axis max.: 350 mm / sec R axis travel direction 250 mm Engine power: 18.5 kW Oil tank capacity: 250 litres length 42 Csb Eod Tpadj T R Skogt

Condition: as good as new (ex-display), The AHK V CNC series models fulfill the most demanding requirements for modern press brakes according to European standards. These models were developed with advanced design technology and built on modern production lines resulting in superior quality, precision and reliability. All AHK V CNC series models feature a DELEM graphical touchscreen that provides efficient CNC programming tools and control over the entire bending process. Various back gauge options are available so these press brakes easily can be adapted for a wide spectrum of requirements. Cjb E T R Ssv Rbxdjkegt

Condition: used, Year of construction: 2002, total height: 3,500 mm, total width: 2,700 mm, total length: 4,500 mm, Weight: 16.800 kg Price: On request - Number of axes: 4 Cgjb E Tsv Ul H Te R Skot - Throat depth: 300mm - Back gauge: 1 - Power: 175.0ton - Max. working width: 4050mm - Year: 2002 - Documentation available: Yes - CE mark available: Yes - Serial number: 211732 - Control: CNC - Motor power: 15.0kW - Transport dimensions: 4500mm x 2700mm x 3500mm (l x w x h) - Transport weight [kg]: 16800kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Year of construction: 2024, operating hours: 32 h, Condition: new, Make: DURMA Type: AD-S 30175 Year of construction: 2020* bending length: 3050 mm Press force: 1750 kN Control: DELEM DA-66T Operating hours: 32 h Controlled axes Backgauge: X,R,Z1,Z2,+Delta X +/- 125 mm CNC controlled passage between the uprights: 2600 mm stroke length: 265 mm Installation height: 530 mm table width: 104 mm table height: 900 mm Stands projection: 410 mm travel range X-axis: 650 mm Cgjb E T Redx Nlue Sket traverse speed X-axis: 500 mm/s travel range R-axis: 250 mm infeed speed: 160 mm/s folding speed: 10 mm/s Retraction speed: 100 mm/s Dimensions L/W/H: approx. 4250x1700x2750 mm Weight: approx. 11500 kg Standard equipment Y1,Y2,X,R - X=650 mm Control: CNC Cybelec ModEva 19T - PC 1200 3D SW D-BEND 3D CAD/CAM import & simulation program CNC controlled motor-driven crowning European tool clamping system 60 mm die holder (only for European die system) Throat 410 mm 2 support arms movable from the front with T-slot and tilt stop Backgauge system: Siemens DC Servo motorized with linear guide and ball screw Protective covers CE Marking Extended equipment Safety system CE standard for EU: FIESSLER AKAS-3P motorised+FPSC (SAFETY PLC) Controlled axes Backgauge: X,R,Z1,Z2,+Delta X +/- 125 mm CNC controlled Control: DELEM DA-66T Hydraulic top tool clamping Wila NSCL-II-HC/UPB - PREMIUM - 250 t/m Hydraulic bottom tool clamping Wila NSCR-II-HC-CNC/UPB - PREMIUM - 300 t/m Powerpack for hydraulic clamping AP3-AP4 Bending aid -

Condition: used, Year of construction: 2016, total height: 2,750 mm, total width: 1,670 mm, total length: 4,200 mm, Weight: 8.000 kg Price: On request - Distance between columns: 2600mm - Number of axes: 4 - Throat depth: 410mm - Back gauge: 1 - Power: 100.0ton - Max. working width: 3050mm - Year: 2016 - Documentation available: Yes - CE mark available: Yes - Serial number: 73131611847 - Control: CNC - Motor power: 11.0kW - Transport dimensions: 4200mm x 1670mm x 2750mm (l x w x h) - Transport weight [kg]: 8000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Cgsb E Tov Ul Ecj R Sket Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Year of construction: 2024, operating hours: 33 h, Condition: new, Machine Dimensions: • (L x W x H): 4,250 mm x 1700 mm c 2750 mm Technical data: Bend length: 3,050 mm Free stand passage: 2,600 mm Control: CNC ModEva 19T Controlled axes rear stop: X, R (Z, Optional) Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Cgsbsdx Nm To E T R Skot Table height: 900 mm Stand extension: 410 mm Travel range X-axis: 650mm Travel speed: X-axis: 500mm/s Delivery speed (Y): 160 mm/s Bending speed: (Y): 10mm/s Working speed: (R): 350 mm/s Travel range R-axis: 250 mm Hydraulic oil volume: 200l Engine power: 18.5 kW Weight: approx. 10,500 kg Basic equipment: Controls: Cybelec ModEva 19T CNC-controlled bombing Clamping system above: Durma (europ.) Clamping system bottom: 60mm - holder Rear stop: AC Servo motors with ball-circuit spindle Options include: Fiesseler Security System AKAS ll - FPSC-B-C Top tool buttoned: P97.75.R08 (one in split) Subtool, multiple die (die widths 16/22/35/50mm) The machine can be inspected and demonstrated at any time by appointment at our demonstration centre in Staufenberg. Further machines are ready for demonstration in Staufenberg. On request, we will be happy to provide you with further information.

Condition: used, Year of construction: 1995, total height: 2,550 mm, total width: 1,800 mm, total length: 2,700 mm, Weight: 6.000 kg - Distance between columns: 2100mm - Throat depth: 150mm - Back gauge: 1 - Power: 6.0ton - Max. working width: 2550mm - Year: 1995 - Documentation available: No - CE mark available: Yes - Transport dimensions: 2700mm x 1800mm x 2550mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Cgebov Ewgyo E T R Skst Bram van Summeren

Condition: used, Year of construction: 1986, Press brake Model: Conventional Manufacturer: HACO Type: PPH 4020 Capacity: 40t Max. working width: 2100mm Distance between column: 1600mm Throat: 195mm Stroke: 100mm Max. opening: 295mm Backgauge electric: 500mm Motor-power: 4kW Incl. tooling Machine-dimensions: 2290x1200x2100mm Machine-weight: 3000kg - Year: 1986 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Cgebjvq Uh Ej E T R Sket Bram van Summeren

Condition: used, Year of construction: 1970, Press brake Cjb E T Revq Ukgj Sksgt Model: Conventional Manufacturer: LVD Type: PP Year of manufacturer: 1970 Capacity: 150t Maximum bending width: 2500mm Distance between column: 2040mm Backgauge: 900mm Throat: 250mm Stroke: 175mm Machine-dimensions: 3100x2100x3250mm Machine-weight: 7000kg - Year: 1970 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Press brake Model: Conventional Manufacturer: Promecam Type: RG-1200-25 Cgsb E T Revq Uktj Skot Power: 25t Maximum bending width: 1200mm Distance between column: 1020mm Including foot-control Machine-dimensions: 1450x1000x1850mm Machine-weight: 1500kg - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren