Used press brakes with 150-199t bending force for sale (162)

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 6430025, functionality: fully functional, stroke length: 215 mm, overall weight: 10,000 kg, controller model: Cybelec ModEva 12 CNC, bending force (max.): 150 t, working length: 3,100 mm, TECHNICAL DETAILS Working length: 3,100 mm Bending force: 150 t Maximum stroke: 215 mm Descent speed: 190 mm/s Working speed: 10 mm/s Return speed: 150 mm/s MACHINE DETAILS Control: Cybelec ModEva 12 CNC CNC-controlled axes: Y1, Y2, X, R, Z1, Z2 Giedpfsyyb D Rsx Af Sew Weight: 10,000 kg Main motor power: 11 kW Total connected load: 15 kW Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Nominal pre-fuse current: 35 A Hydraulic operating pressure: max. 300 bar Pneumatic operating pressure: max. 8 bar Overrun distance: 9 mm EQUIPMENT Hydraulic upper clamp: RFA Hydraulic lower clamp: WILA 13 mm Complete tool set (model: P5)

Condition: good (used), BYSTRONIC HYDRAULIC BENDING MACHINE 3100X150 TON, MAX STROKE 315 mm, RAPID STROKE DOWN 190 mm/s, WORKING CYCLE 10 mm/s, RAPID STROKE UP 150 mm/s, DIMENSIONS: 415X200X290cm (h) WEIGHT 11,000 KG Y1 Y2: hydraulic cylinder axes. X forward and backward axis of the register. R upward and downward axis of the register. Z1 and Z2 axes of the movement to the right and left of the stops. X1 or relative X which is the axis of the movement forward and backward of a single stop. 7 axes. Gjdpfovxipgsx Af Soiw The control also manages the hydraulic crowning, which can be considered the eighth axis.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, TRADE FAIR MACHINE Hydraulic press brake Type: SPEEDBEND 3100 x 175 t 7-axis CNC (Y1 – Y2 – X – R – Z1 – Z2 – X5) Capacity: 175 t Working length: 3100 mm Clearance between uprights: 2600 mm Throat depth: 410 mm Adjustable stroke: 275 mm Daylight between upper and lower table: 550 mm Working height: 900 mm Gsdsy Ed Euepfx Af Soiw Approach speed: 180 mm/s Working speed: 10 mm/s Return speed: 190 mm/s Motor power: 15 kW Dimensions: 4250 x 2150 x 2800 mm Weight: 9086 kg Equipped with: - Numerical control ER99, graphic 3D simulation with simulation of bending process, tools and machine. - X5 (motorized backgauge finger with +/- 100 mm offset) - Motorized rear backgauge 800 mm - Motorized Wila-type crowning system - Front support arms with T-slot and millimeter scale - Upper and lower tool length - Laser front safety devices mounted on movable brackets with PLC and test procedure at startup in accordance with applicable regulations - Hydraulic oil included in delivery 2-year warranty For complete description and technical data, see

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: Aventa PLUS 4 x 2, type of input current: DC, working range: 40,002,000 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, cutting current: 300 A, Equipment: documentation/manual, Macchina in operazione Gedpsw Al Rmofx Af Seiw

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3216-CNC OT-41 Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2500 mm - Weight: 8800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation Gisdpfx Aogi Dlpsf Sjw - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Year of construction: 1983, condition: used, machine/vehicle number: 28148, pression: 150 t Giodpfx Aeb N Evmof Sow working width: 4500 mm clear support width: 3050 mm support throat: 300 mm rear stop: 1000 mm electrical connection: 380 V, 18,5 kW weight: 14,8 t space needed: 4200 x 2000 x 3000/3150 mm

Year of construction: 1991, condition: used, machine/vehicle number: K2940, pression: 150 t working width: 4300 mm clear support width: 3600 mm support throat: 300 mm Gjdpfx As Dnf Usf Ssiw max. assembly height: ca. 500/700 mm working speed: auf-/abwaerts 41 - 65/10 mm/sec rear stop: 1000 mm electrical connection: 400 V, ca. 15 kVA kW weight: 14 t space needed: 4600 x 1950 x 3100 mm

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Stock machine // Subject to prior sale CNC-controlled press brake in all-steel welded construction with DELEM DA66S control, HAWE hydraulics, Fiessler AKAS II laser safety system, and CNC-controlled table crowning Technical data: - Maximum pressing force: 160 tons - Bending length: 3100 mm - Bending length between uprights: 2550 mm - Throat depth: 410 mm - Table width: 60 mm - Table height from floor: 870 mm - Installation height: 530 mm - Max. ram stroke: 260 mm - Closing speed: 200 mm/sec - Pressing speed: 10 mm/sec - Return speed: 160 mm/sec - Max. backgauge travel (X axis): 750 mm - Max. backgauge travel (R axis): 150 mm - Backgauge traverse speed in X axis, servomotor: 330 mm/sec - Backgauge positioning accuracy: +/- 0.03 mm - Motor power: 15.0 kW - Oil tank capacity: 180 l Equipment / Standard accessories: - CNC control “DELEM DA66S” for user-friendly graphical product programming. The controller calculates the bending sequence and all axis positions (including collision warning) at the push of a button, 24” TFT color touchscreen display, USB interface, network connectivity, and tool database for 100 punches and dies each. Graphical 2D programming, 2D preview during operation, up to 12 axes plus auxiliary functions. Includes PC programming software “Profile - TL" and remote service (teleservice) via TeamViewer. - Manual quick-clamp system for upper tools, Promecam/AMADA type, with screw lever, safety nose, and plastic pressure bar for secure clamping, even with narrow tools. Max. load: 100 t/meter - Split upper tool, "Amada System," manufacturer Italy, material C 50 (HRC 50-52), induction hardened and ground on work faces. Bending capacity: 100 t/meter. Standard delivery, division: 3 x 835 mm, horns left and right 100 mm each, remainder in smaller segments. Height: 66.6 mm - Lower tool / 4-way prism block CroMo 4, ground, 60x60 mm, standard V-openings: 16 - 22 - 35 - 50 mm - Modern design for side and top covers - Side safety covers with magnetic closure for quick opening/closing during tool changes - 2-axis backgauge system with ball screw drives and servo motors, CNC controlled, max. X-axis range 750 mm, R-axis 150 mm. Positioning accuracy +/- 0.03 mm, traverse speed: 330 mm/sec. Includes 2 laterally adjustable stop fingers. - "FIESSLER" double-beam laser safety system, type AKAS/LCII. Operation of the press only possible via foot pedal. Manually adjustable via linear guides in both vertical and horizontal axes for extremely easy and quick adjustment after tool changes. - Automatic motorized table crowning system WILA, integrated into the CNC - Front sheet supports (2 pcs) laterally movable on linear guides, height-adjustable by handwheel - Central lubrication with hand pump - Spring-back compensation via CNC - Oil fill Gsdpfjy Anftox Af Soiw - Operating manual in German with spare parts list - Hydraulic manifold, valves by HAWE/HOERBIGER - Hydraulic pump: tandem pump by HAWE - Relays and contacts: Schrak, Pilz, Siemens, Eaton or Telemecanique - CE conformity - Operating hours counter - Dual-color paintwork: Body RAL7015 slate grey; covers, swing arm and controller housing: RAL7035 light grey; support arms and front of side covers

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 2,375 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 175 t, stroke length: 160 mm, operating speed: 10 mm/s, reverse speed: 140 mm/s, table width: 3,400 mm, table length: 3,400 mm, total length: 4,400 mm, total width: 1,800 mm, total height: 2,950 mm, overall weight: 12,500 kg, Equipment: CE marking, BOSCHERT – GIZELIS G-BEND PLUS 3175 Gijdpjy Am Nqjfx Af Sow CNC Controlled Press Brake Machine available for collection in June. 1. Features and Capabilities: ■ Modern machine frame design ensures an optimal installation footprint. ■ Compact build with high operational safety, resistant to external influences. ■ Reinforced, heavy-duty sidewalls for added structural rigidity. ■ Maintenance-free, dual ram guiding system, independently controlled for Y1 and Y2 axes. ■ Advanced hydraulic system featuring a proportional multi-valve configuration and pressure management, equipped with an energy-efficient STOP&GO function during operation. ■ High-precision, dual active ram position measurement system ensuring top bending accuracy. The system includes a minimum of two independent, highly accurate linear encoders installed on mounts decoupled from the frame. Ram positioning accuracy is +/- 0.01 mm. Provides full electro-hydraulic frame synchronization (Y1, Y2). ■ Ram parallelism to the bending axis is maintained by a double roller guide on both sides of the internal frame section, supplemented by crosswise ram reinforcements. ■ Cylinders and pistons are made from high-strength steel with chrome-plated piston surfaces. ■ The machine and its accessories are intuitive to operate and designed for easy maintenance. ■ Provisions are made for future upgrades with new technical innovations. ■ All digital axis drives are powered by premium, maintenance-free AC servomotors. ■ The rear backgauge utilizes dual linear guides for precise bilateral movement. ■ An extensive and versatile tooling portfolio enables flexible processing of a wide range of workpieces. ■ The design and construction comply with EU health and safety directives in line with the CE mark. The machine is CE-certified and built according to Directive 2006/42/EC. 2. Technical Data: Model/data 3175 Press force 175 ton Max. working length 3,400 mm Working length between uprights 3,050 mm Throat depth in side frames 400 mm Opening between table and ram 615 mm Ram stroke 350 mm Maximum X-axis backgauge travel 1,200 mm Ram speed: Y rapid traverse (unloaded) 0-160 mm/s Y working (under load) 10.0 mm/s Y return 0-140 mm/s Electrical Specification (others on request): Voltage 400 V Frequency 50 Hz Motor (flange-mounted AC, incl. controller) 22 kW Approximate Dimensions: Machine height approx. 2,950 mm Machine width approx. 1,800 mm Machine length approx. 4,400 mm Max. weight (with accessories) 12,500 kg 3.6 5-Axis CNC Backgauge System: X-ΔX-R-Z1-Z2 X axis: Parallel movement of the backgauge beam ΔX axis: Adjustable backgauge finger for angled (skew) bends. Adjustment range +/- 175 mm (total 350 mm). R axis: Vertical adjustment of the backgauge beam Z1, Z2 axes: Automatic lateral travel of backgauge fingers along the beam. All axes are powered by AC servo drives. Two backgauge fingers on the beam with integrated sheet support feature. All axes are CNC controlled by the DNC system. Tooling: Punch: TOP.175.60.R08 60° R0.8MM H=175 L=5x525 mm TOP.175.60.R08 60° R0.8MM H=175 L=1x495 mm Segmented: 25/30/35/40/45/50/100/170 mm TOP.175.60.R08 60° R0.8MM H=175 L=1x500 mm Segmented: 100/300/100 mm Die: Multi-V die M.460.60 V=10-16-22-35 (60°), L=4x835 mm

Condition: new, The APHS MAX is a custom-engineered, heavy-duty press brake developed for large-scale and special bending applications. It is designed to meet the demands of industries requiring extra-long, high-tonnage, or custom-configured press brakes. This model combines power, precision, and adaptability, making it ideal for processing oversized workpieces and fulfilling unique production requirements. Giodpewnagtofx Af Sow

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. Giedpfxsrq D Nie Af Sew The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: used, Year of construction: 2001, functionality: fully functional, operating hours: 38,990 h, Hydraulic Press Brake Manufacturer: TRUMPF Model: TrumaBend V170 Year: 2001 Technical Details Manufacturer: TRUMPF Model: TrumaBend V170 Year of manufacture: 2001 Operating hours: 38,990 h Pressing force: 170 t Bending length: 4080 mm Stroke: 365 mm Frame gap: 3680 mm Table width: 200 mm Throat depth: 410 mm Rapid traverse: 200 mm/s Working speed: 1 – 11 mm/s Return speed: 135 mm/s Connected load: 21.4 kVA Oil capacity: 350 l Dimensions (approx.): L 4.70 x W 2.40 x H 2.98 m Weight: 18 t Features • DA 2D graphic control Gedpfoyvqiusx Af Seiw • Hydraulic upper and lower tool clamping • Hydraulic WILA tool system • CNC-controlled crowning • Controlled axes: X, R, Y1, Y2 • 4 movable backgauge fingers, pneumatically clamped • Upper tool: 60°/R4, H 195mm, L = 3,850mm, segmented • Lower tool: V16/30°, R 1.6, H 100mm, L = 3,550mm, segmented • Lower tool: V40/80°, R 5, H 100mm, L = 3,100mm, segmented All information without guarantee. A powered demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 1986, Gebruikte conventionele kantbank van 4 meter Gsdeyu Stdspfx Af Sjiw Type: PPH 40160 Capaciteit: 4100 x 160 ton Elektrische achterasverstelling Elektrische diepteverstelling 1 set gereedschap

Condition: good (used), Year of construction: 2008, pressing force: 160 t, stroke length: 290 mm, overall weight: 11,000 kg, working width: 4,100 mm, distance between side stands: 3,550 mm, Brand: Dener Model: DMP 160/40 Year: 2008 Bending length: 4,100 mm Force: 160 tons 2 axes (Y, X) *Torsion bar machine, Y axis X stop: 650 mm Cylinder stroke: 290 mm Distance between uprights: 3,550 mm NC control: Dener HT062 Neck: 450 mm Motor power: 15 HP Godpfxjwi Skts Af Seiw Weight: 11,000 kg

Condition: good (used), Year of construction: 1998, pressing force: 150 t, stroke length: 215 mm, working length: 3,100 mm, Completely rebuilt machine. New Cnc: Step Automation Rock 15 (Touch Screen and 2D) Bending length: 3100mm Gjdouc Txzjpfx Af Soiw Force: 150tn 6 axes (Y1, Y1, X, R, Z1, Z2) Travel/Travel: 215mm Delivered with complete set of 3 meters of punches and dies. *Machine in the process of retrofitting, new cnc to be installed.

Condition: new, Year of construction: 2025, functionality: fully functional, stroke length: 260 mm, throat depth: 410 mm, controller manufacturer: Cybelec, controller model: VisiTouch 19, working width: 3,100 mm, bending force (max.): 160 t, distance between stands: 2,550 mm, control type: CNC control, degree of automation: automatic, Baykal APHS PRO 31160 CNC Press Brake Gjdpfx Ajyrf Upjf Ssiw The Baykal APHS PRO 31160 is a CNC-controlled press brake with an all-steel welded frame. The machine features HAWE hydraulics, Fiessler laser protection (AKAS / LCII), and a CNC-controlled crowning table. Operation is via a Cybelec 2D CNC control unit. Technical specifications: Press force: 160 t Bending length: 3,100 mm Bending length between uprights: 2,550 mm Throat depth: 410 mm Table height: 870 mm Max. ram stroke: 260 mm Motor power: 15 kW Oil tank capacity: 180 l The 2-axis backgauge (X-R) is driven by AC servo motors and provides a positioning accuracy of ±0.03 mm. Travel range: X = 1,000 mm; R = 160 mm; travel speed: 330 mm/s. Two laterally adjustable stop fingers are included. Equipment: - Cybelec 2D CNC control - Fiessler AKAS / LCII laser safety - Automatic motorized crowning table (WILA system) - Segmented upper tooling, Amada system - Manual quick-release clamping system Promecam / AMADA - 2 front sheet supports, laterally adjustable - Central lubrication - Operating hours counter - CE compliance Machine details: Year of manufacture: 10/2025 Serial number: 31865 Dimensions (L×W×H): 3,820 × 1,800 × 2,700 mm The machine is in stock and available for immediate delivery. Warranty: 12 months for single-shift operation.

Condition: excellent (used), Year of construction: 2004, specification 150 TONS X 4000 4 AXIS CNC HYDRAULIC DOWN STROKING PRESS BRAKE COMPLETE WITH FULL LENGTH TOP AND BOTTOM TOOLING INCLUDING A BOTTOM MULTI VEE BLOCK description TYPE HYDRAULIC DOWNSTROKING BENDING LENGTH 4000 BENDING PRESSURE 150 TONS CONTROL CYBELEC DNC 60 NO OF AXIS 4 AXIS CONFIGURATION X1 Y1 R MAX SPEED 80mm/SEC Giedpeh N Dqrofx Af Ssw STROKE 180 mm GUARDS MACHINE MOUNTED ELECTRONIC GUARDS SIDE AND REAR INTERLOCKED FENCING WEIGHT 11200 KG SERIAL NO. 6150/11324 MOTOR SIZE 7.5 KW YEAR OF MAUFACTURER 2004

Condition: new, Year of construction: 2025, neu 2025 080112 prompt, Zwischenverkauf v Türkei Godpswiranjfx Af Seiw 86376 € 1438.29 € 1 76100 € 175 to 3050 mm Y1 / Y2 / X und R-Achse 265 mm 2600 mm 450 mm 530 mm hydraulisch 160 mm/s 10 mm/s 100 mm/s 500 mm/s 350 mm/s 250 mm 900 mm 104 mm 250 l 18.5 kW 4250 mm 1700 mm 2850 mm 10900 kg 4axes (Y1, Y2,X and R) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... OPTIONAL EQUIPMENT (TIME OF DELIVERY WITH THESE OPTIONS 10WEEKS): Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick Release Clamping

Condition: used, Year of construction: 2010, functionality: fully functional, controller manufacturer: Cybelec, controller model: DNC 880S, working width: 3,100 mm, bending force (max.): 160 t, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Neat Deratech press brake with a capacity of 160 tons and a bending length of 3 meters. Equipped with a Cybelec CNC control, CNC X-axis, R-axis, and two backgauge fingers that can be manually adjusted sideways. Hydraulic crowning. The seals of the hydraulic crowning system have been recently renewed. Giodjyxxn Djpfx Af Sjw

Condition: as good as new (ex-display), functionality: fully functional, Equipment: CE marking, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, Hydraulic press brake with 4-axis backgauge. Demonstration machine, available immediately. German hydraulic pump with servomotor, highly efficient. Promecam tool holder, tooling included. Godpfx Asywz Dxof Sjiw

Condition: used, stroke length: 30 mm, overall weight: 10,500 kg, bending force (max.): 170 t, control type: CNC control, degree of automation: automatic, AMADA Promecam HFB Press Brake — 1700 kN / 3000 mm For sale: Heavy-duty hydraulic press brake for industrial use, in very good working condition. Machine details: Manufacturer: Amada Promecam (France) Model: HFB Year of manufacture: 1991 Technical specifications: Press force: 1700 kN (170 tons) Maximum stroke: 130 mm Input voltage: 380 V / 50 Hz, 3-phase Installed power: 13 kW Nominal current: 27 A Weight: 10,500 kg Gisdjywr R Aspfx Af Sjw Control system: Delem DA 58 graphical CNC controller Additional information: The machine is equipped with a full air bending capacity chart mounted directly on the machine body. Tooling included. This press brake has been in regular production use and is in full working order. For further information and inquiries, please contact us by email or phone. Available for collection by arrangement.

Condition: ready for operation (used), Year of construction: 2000, pressure 170 t chamfer lenght 3170 mm Gisdpfx Ajxabgpjf Sew distance between columns 2700 mm column arm 420 mm dayligth 470 mm stroke 200 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec table width 180 mm table height 960 mm oil volume 235 L 0 300 bar controlled axis 6 Anzahl Number of working hours 29.400 h total power requirement 16.5 KW weight of the machine ca. 11910 kg range L-W-H 4025 x 2020 x 2900 mm well-maintained condition (!!) with only approx. 29.400 operating hours - in checked condition - machine video - ?v=APP0HZjMms4 Equipment: - electro-hydraulic CNC press brake - AMADA CNC control "OPERATEUR 2" - 6 axes (X, Y1 + Y2, R, Z1 + Z2) * swiveling operation - front left * tool & program library - CNC-controlled back stop adjustment (X-axis) * adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R-axis) * adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1 + Z2) - hand control unit for manual movement of the axes - AMADA manual upper tool clamping system - AMADA Rehfuß upper tools - divided - AMADA Lower tool holder - incl. 1x V die (not complete) - AMADA DIGI PRO - gigital angle measuring system - 1x freely movable double foot switch - side protective device (swinging doors) - rear protective device (swinging door) - EMERGENCY OFF button at the front - Operating instructions (ENG)

Year of construction: 1990, condition: good (used), machine/vehicle number: 59502, Item No. 22564 Technical data: - Pressing force: 150 t - Working width: 2600 mm - Clearance between columns: 2100 mm - Table width: 180 mm - Overhang: 250 mm - Installation height: 325 mm - Drive: 400 V / 7.5 kW - Space requirement: approx. W 3000 x H 2400 x D 1600 mm Gedpfsin I Nbex Af Seiw - Weight: approx. 7000 kg - Includes: - Two-hand control panel with foot pedal

Condition: good (used), Year of construction: 1997, machine/vehicle number: 887043, Offer 24557 Technical data: - max. working length 4060 mm - column clearance 3680 mm - max. pressing force 1700 kN - max. distance table / ram 385 mm Gijdsu T Nknepfx Af Ssw - column projection 410 mm - ram stroke 215 mm - stroke speeds - downward speed idle max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to. 11 mm/sec - Total drive power 30 kW - Space requirement approx. W 5600 x H 3000 x D 2400 mm - Weight approx. 18000 kg - with: - with 6-axis CNC control DELEM - Two-hand control panel with foot switch - Crowning device - Controlled back stop with height adjustment 5 - 860 mm - Hydraulic upper + lower tool clamping - Die table displacement pneumatically supported

Condition: good (used), Year of construction: 2006, machine/vehicle number: 91426, Offer 25227 Technical specifications: - Pressing force: 150 t - Working width: 3600 mm - Clearance between uprights: 3150 mm - Table width: 180 mm - Throat depth: 250 mm - Installation height: 325 mm - Approach speed: 70 mm/sec - Working speed: 7 mm/sec - Return speed: 60 mm/sec - Ram stroke: 120 mm - Adjustable backgauge range: 120 mm - Motor power: approx. 7.5 kW - Oil capacity: approx. 300 l - Space requirement: approx. W 3850 x H 2300 x D 1600 mm - Weight: approx. 8700 kg Gijdpfx Ajwvih Njf Sjw Includes: - Swivel arm – operator panel with ATL 550 control - For pressing depth & backgauge - Motorized backgauge - Crowning device - FIESSLER Lasersafe - 4-way universal die, segmented punch tool & “gooseneck” die - Two-hand operation desk, foot pedal,