Used Amada for sale (212)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, laser power: 4,000 W, table length: 1,500 mm, table width: 3,000 mm, Equipment: cooling unit, No minimum price – guaranteed sale to the highest bidder! The machine was serviced in 2022 by an Amada specialist. The service protocol can be found attached to this listing! TECHNICAL DETAILS Laser power: 4 kW Table width: 3,000 mm Table length: 1,500 mm Hfodjxgg Irjpfx Afisn EQUIPMENT Ridel chiller Donaldson extraction unit 2 exchange tables

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3 h, functionality: fully functional, pressing force: 20 t, working width: 1,250 mm, travel distance Y-axis: 1,270 mm, sheet thickness (max.): 6 mm, working length: 1,250 mm, No minimum price – guaranteed sale to the highest bidder! Machine from a training workshop with only 3 hours of punching time! Submission of a bid obligates timely collection by 21/11/2025! TECHNICAL DETAILS Pressing force: 200 kN Maximum sheet thickness: 6 mm Turret stations: 51 Auto-index stations: 4 Y-axis travel: 1,270 mm Working area: 1,250 x 1,250 mm MACHINE DETAILS Control system: AMNC-F Weight: 12,500 kg Electrical data Full load current: 55 A Short-circuit current: 25 kA Power consumption: 19 kVA Nominal voltage: 200 V Frequency: 50 Hz Operating hours Punching time: 3 h Power-on time: 895 h EQUIPMENT Solution Pack Blank School offline software AP100 2D CAD Production Designer 3D VPSS3i Blank Hfodpfx Aoxn Rvijfion Tooling package valued at EUR 8,000

Condition: good (used), Year of construction: 1990, Press force: 50 t Bending length: 2085 mm Hfjdpfjxnyi Sjx Afijn Distance between uprights: 1690 mm Stroke: 105 mm Throat depth: 400 mm Table height: 960 mm Total power requirement: 6.5 kW Machine weight approx.: 3,450 kg Space requirement approx.: 2500x1800x2200 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, year 2005 stock no. 01930 specification 7 AXIS CNC 50 TONS X 2000 HYDRAULIC DOWNSTROKING PRESS BRAKE description TYPE HYDRAULIC DOWNSTROKING CAPACITY 50 TONS CONTROL OP 2000 CNC NO OF AXIS SEVEN X 1 X 2,Y 1 Y 2, R 1 , Z1 & Z2 BENDING LENGTH 2000 mm OPEN HEIGHT 470 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR SIZE 7.5 KW APPROACH SPEED 100 BENDING SPEED 10 RETURN SPEED 100 SERIAL NO GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC Hodsr Artqjpfx Afiefn SIDE INTERLOCKED FENCING REAR INTERLOCKED price 38000

Condition: used, Year of construction: 2007, Punching machine Amada EMK 3610 NT, year 2007, including loading unit MB300. The machine can be inspected under power at any time. Hsdpfxoxn Rfqj Afiofn

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, ram adjustment: 90 mm, table width: 900 mm, table length: 550 mm, overall weight: 6,150 kg, pressing force: 60 t, type of input current: three-phase, power: 5.5 kW (7.48 HP), compressed air connection: 5 bar, warranty duration: 5 months, input voltage: 200 V, year of last overhaul: 2021, Equipment: documentation/manual, Amada TP 60C-X2 Eccentric press with air clutch for sale in new condition Year of manufacture: 1983 pressing force 60t two-handed operation central fattening stroke length: 90mm number of strokes: 65-100/min table-bear distance: 275mm stroke adjustability: 80mm table size: 900x550mm bear size: 500x400mm total response time: 175ms voltage: 200v 50Hz 5.5kw machine weight: 6350 kg Hodpfju Haqhjx Afiefn

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Hfodpfswq Dpqjx Afijn Working stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R

Condition: good (used), Year of construction: 1998, pressure 50 t chamfer lenght 1250 mm distance between columns 1070 mm Stroke beam 100 mm max. opening beam/table 370 mm C-recess 300 mm max travel X-axes 400 mm R1 and R2 axis controlled by cnc 100 mm Z1+Z2 axes controlled by cnc manuell mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 56000 h length 1600 mm width 1500 mm Hsdsxl E Tkjpfx Afiefn height 2000 mm weight 2600 kg total power requirement 2,5 kW dimensions of the machine ca. 2x2x2 m weight of the machine ca. 2,56 t All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Year of construction: 2017, condition: ready for operation (used), General Data Measurements width 2840 mm Measurements depth 9997 mm Measurements height 2285 mm Machine weight 12600 kg Control Unit Brand AMADA Model AMNCF This 3-axis AMADA LCG-3015AJ 9kw + ASLUL TWIN TOWER was manufactured in 2017. It features a laser source AJ 9000, with cutting speeds up to 60 m/min and axis travel of 1550 x 3070 mm. Ideal for precise fiber laser cutting, it includes a 16-station nozzle changer and twin tower storage. Consider the opportunity to buy this AMADA LCG-3015AJ fiber laser cutting machine. Contact us for more information about this machine. Hodpfexlvbxox Afijfn Application Types Cutting

Condition: reconditioned (used), Year of construction: 2017, operating hours: 2,710 h, functionality: fully functional, grinding length: 1,000 mm, grinding width: 600 mm, distance table to spindle center: 750 mm, table length: 900 mm, table load: 1,500 kg, type of input current: three-phase, table width: 600 mm, grinding wheel width: 50 mm, overall weight: 11,000 kg, grinding spindle motor power: 11,000 W, grinding wheel speed: 2,000 rpm, input voltage: 400 V, Equipment: documentation/manual, TECHNICAL CHARACTERISTICS: CNC control : FANUC series 32i-B Colour touch screen : 15 ["] W axis travel (longitudinal axis) : 1300 [mm] Min. Stroke speed W axis : 0.1 [mm/min] Max. Stroke speed W axis : 40000 [mm/min] Rapid traverse rate W axis : 40000 [mm/min] X axis travel (transverse movement) : 660 [mm] Min. Stroke speed X axis : 0.1 [mm/min] Max. Stroke speed X axis : 5000 [mm/min] Rapid traverse rate X axis : 5000 [mm/min] Resolution X axis : 0.0001 [mm] Stroke Y axis (vertical movement) : 750 [mm] Min. Stroke speed Y axis : 0.1 [mm/min] Max. Stroke speed Y axis : 500 [mm/min] Rapid traverse rate Y axis : 2000 [mm/min] Resolution Y axis : 0.0001 [mm] Table length : 900 [mm] Table width : 600 [mm] Max. distance spindle nose / table : 750 [mm] Max. load on table : 1500 [Kg] Grinding wheel min. speed : 300 [rpm] Grinding wheel max. speed : 2000 [rpm] Grinding spindle motor power : 11 [kW] Max. diameter grinding wheel : 405 [mm] Max. grinding wheel width : 50 [mm] Grinding wheel bore : 127 [mm] Hsdpfxjwuk Inj Afiofn Total power required : 29 [kVA] Weight : 11000 [Kg] EQUIPMENT / INCLUDED OPTIONS: x1 electro-magnetic chuck 900 x 600 [mm] x3 linear glass scales on the 3 linear axes x1 workpiece probe x1 paper tape filtration unit x1 oil chiller DAIKIN AKZ149-C x1 oil mist collector IFS type M 1600 x1 transformer The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed

Condition: like new (used), Year of construction: 2013, Technical Data / technical details: The FLW is a flexible and highly productive laser welding cell with extensive equipment. The focused laser beam is used as an energy source to melt and join materials together. The laser welding cell consists of a fiber laser and a 6-axis industrial robot, which moves along a travel rail. The parts to be welded are clamped onto a rotary-tilting table. The safety enclosure is equipped with a sliding door to ensure safe operation. Robot: Type: M-710iC/50 (FANUC) Robot controller: SYSTEM R-30iA (FANUC) CNC control: AMNC Number of controlled axes: 6 Reach: 2,050 mm Welding head: AMADA Repeatability: 0.07 mm Safety enclosure: Full enclosure Robot track: Length: 1,500 mm Travel speed: 60 m/min Repeatability: ± 0.1 mm Positioning table: Working height: 700 mm Max. load capacity: 500 kg Rotary axis: ± 720° Tilting axis: ± 90° Laser source: Type: YLS4000-S2T Wavelength: 1,070 – 1,080 μm Laser power: 4 kW Control: Type: Amada Display: 15” LCD colour touchscreen Hfsdpsxndynjfx Afijn Controlled axes: Robot and linear axis Coordination between robot and laser source Memory: 3 MB SRAM I/O interface: LAN, USB Welding Head: Amada Focus position adjustment: -10 mm to 50 mm CCD camera for TAS system included as standard Optical weaving included as standard Cross jet nozzle included as standard Coaxial nozzle included as standard Welding wire feed: 0.8 to 1.6 mm Weaving System: The integrated rotary optics allow the laser beam to move in a circular pattern. The patented system by AMADA enables welding of larger gaps with or without filler material and even allows welding of aluminum. NC Focus System: The NC Focus System automatically sets the optimal focus position for the specific welding condition. It supports welding simple butt joints as well as hard-to-reach corners. Filler wire and intelligent gas supply: Up to 20 kg of filler wire can be used. When using the TAS (Teach Assistant System), the gas nozzle retracts automatically. TAS (Teach Assistant System): The TAS system eliminates time-consuming manual teaching operations. Deviation between the programmed and actual weld path is detected using a CCD camera. Condition: Very good condition Machine has been used very little: approx. 16,500 operating hours. The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, table width: 1,000 mm, table length: 600 mm, overall weight: 8,160 kg, pressing force: 80 t, stroke length: 100 mm, input voltage: 200 V, year of last overhaul: 2021, Amada TP 80C-X2 Eccentric press with air clutch for sale in new condition Year of manufacture: 1983 Hodpfx Afeu E U Nioiefn pressing force 80t stroke length: 100mm number of strokes: 60-100/min table-bear distance: 310mm stroke adjustability: 80mm table size: 1000x600mm bear size: 590x450mm sudden stop time: 195 ms maximum downtime 215ms machine weight: 8160 kg

Condition: used, Year of construction: 1988, Amada Promecam ITS 5020 CNC Pressbrake With Promecam CNC MB Control Hodpjxnb Ehefx Afiofn Maximum Tonnage 500 KN. Maximum Bending Length 2,000mm. Working Top Height 960mm. Intake 370mm. Maximum Stroke 105mm. Goose Neck 400mm. Sideplate Entry 1,690mm. Approx Speed 85mm/sec. S/No. ITS 050 20 107 (1988). With Assorted Tooling, Sick Safety Curtain & Foot Switches. Overall Dimensions W2,500 x D1,745 x H2,180mm. Weight 3,450kg.

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 2,600 h, control type: CNC control, controller model: Fanuc 32 C, Equipment: documentation/manual, Standard programs such as parameter settings Dressing settings Speed settings Program management settings Limitation of travel distances x + y Basic parameter settings Grinding wheel management program Warming-up cycle program Surface plunge grinding program Measuring program 15 kVA transformer Full enclosure Meister G3 Spindle upgrade to 3.7 kW, disc 225 mm ETHER interface for network connection Control module with extended memory Fanuc Macro B option Program creation for batch programs Programmable spindle speed WinWop program for contour creation (Windows) WINWop program for error compensation WinWop postprocessor CGS Complete Grinding Solutions software Option Dressing Swiveling profile dressing device Diamond dressing wheel Pre-dressing device VPA 100 L Diamond wheel 100 mm for pre-dressing device Regrinding package diamond wheel G3 / W Option – Clamping and Balancing Magnetic chuck 400 x 200 400 mm stop bar with prism Fully automatic balancing device, size 1 Hfjdpfow I Tt Ssx Afion Grinding wheel flange for G3, bore 51 mm Option Filter Systems Belt filter system 175 l Extraction unit for emulsion mist 500 Inquiries only from Europe, preferably the EU.

Condition: like new (used), functionality: fully functional, Year of construction: 2021, control type: CNC control, laser type: fiber laser, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 12 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, working length: 3,000 mm, working width: 1,500 mm, power: 3.15 kW (4.28 HP), Flatbed laser with tube cutting unit Hodpfxjxmikce Afiofn - 16-position automatic nozzle changer - 2-position cassette table - Industrial chiller KKT Chillers - Filter system Herding Comp 1500-9/9 SB - Laser hours: 1,595 - Cutting hours: 1,168 - Operating hours: 1,741

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, grinding wheel diameter: 355 mm, distance table to spindle center: 500 mm, table load: 1,000 kg, type of input current: three-phase, overall weight: 5,000 kg, grinding spindle motor power: 7,500 W, grinding wheel speed: 2,500 rpm, input voltage: 400 V, Equipment: documentation/manual, TECHNICAL CHARACTERISTICS: Hfedpfjwulg Eox Afijn CNC control : FANUC series 32i-B W axis travel (longitudinal axis) : 1000 [mm] Min stroke speed W axis : 0.1 [mm/min] Max stroke speed W axis : 40000 [mm/min] Rapid traverse rate W axis : 40000 [mm/min] X axis travel (transverse movement) : 450 [mm] Min stroke speed X axis : 0.1 [mm/min] Max stroke speed X axis : 5000 [mm/min] Rapid traverse rate X axis : 5000 [mm/min] Resolution X axis : 0.0001 [mm] Stroke Y axis (vertical movement) : 500 [mm] Min stroke speed Y axis : 0.1 [mm/min] Max stroke speed Y axis : 500 [mm/min] Rapid traverse rate Y axis : 2000 [mm/min] Resolution Y axis : 0.0001 [mm] Table length : 600 [mm] Table width : 400 [mm] Max distance spindle nose / table : 500 [mm] Max load on table : 1000 [Kg] Grinding wheel min speed : 300 [rpm] Grinding wheel max speed : 2500 [rpm] Grinding spindle motor power : 7.5 [kW] Max diameter grinding wheel : 355 [mm] Max grinding wheel width : 50 [mm] Grinding wheel bore : 127 [mm] Total power required : 23 [kVA] Weight : 5000 [Kg] EQUIPMENT / INCLUDED OPTIONS: x1 electro-magnetic chuck 600 x 400 [mm] x3 glass linear scales on the 3 linear axes x1 workpiece probe x1 paper filtration unit x1 oil chiller DAIKIN AKZ149M133 x1 oil mist collector IFS type IFMC 1100 x1 transformer The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed

Year of construction: 2004, condition: used, Applicable material: Metal Hfedpfx Afjxmfgtsion Auction item. Laser cutting machine was in working condition. Dismantled 2 months ago. Brought from France. Sold together with automatic feed system, filtration system, conditioner and transformer. Sold as seen in pictures.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, pressing force: 150 t, compressed air connection: 6 bar, input voltage: 200 V, Equipment: safety light barrier, Manufacturer: AMADA Type: TP-150C-X2 Pressure: 150t Year of manufacture: 1986 Hedpou Dw U Sefx Afiofn Stroke length: 175mm Distance above table: (adjustable) 230-330mm Table size: 1250x750mm Bear size: 700x550mm Electrical power: 3x200V(!!), 11kW - ​​Japanese standard Net weight: 16326kg Automatic greasing system. Optionally with disc winder and straightener.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Amada PC SAW 700 Used fully automatic bandsaw. Technical basic data: Cutting range: 290 – 700 mm. Hjdjxmd Dwjpfx Afijfn Main drive: 18.5 kW Saw blade: 8300 x 67 x 1.6 mm. Weight: 10,000 kg. Fully functional, currently powered and in operation. Delivery without roller conveyors before and after the machine. Inspection possible.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 12,096 h, Amada hydraulic press brake type HFT 130-3 working width 3100 mm max. pressing force 130 tons CNC-controlled Y1 Y2 X and R axes CNC control CNC OP 2000 Fiessler light curtain Drive power 12.5 kW Weight 8200 kg Hjdpfx Afsxhfuysiofn

Condition: good (used), Year of construction: 1989, Punching machine Manufacturer: Amada Model: Aries 245 Year of manufacture: 1989 CNC control: Amada 04PA Operating hours: approx. 20,000 Hfjdpfxerxrgds Afisn Punching force: 200 kN Sheet thickness (stainless steel) max.: 3 mm Sheet thickness (mild steel) max.: 4 mm Sheet thickness (aluminum) max.: 3 mm Travel paths: 1,270 x 1,000 mm Turret: 20 stations (2x indexable B-stations) Incl. complete tool set! Power: 11 kVA Dimensions (LxWxH): 2,700 x 3,784 x 1,950 mm Weight: 7,500 kg plus 2,500 kg base plate 91025ä

Condition: used, functionality: fully functional, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, Amada Promecam Guillotine Shear Type GPX 630 For more information, please contact us BT MACHINES Hfodpfexgpqvsx Afien BUYING AND SELLING ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: ready for operation (used), AMADA PROMECAM 3000 x 6 shears Hsdpovt Svrofx Afiefn Type GPX 630 Capacity 3000 x 6 Maximum stroke 160 mm Rate 16 to 45 strokes/min Cutting angle from 40' to 2°20' Rear stop stroke 1000 mm Motor 15 kw Approximate weight 6500 kg Dimensions 3750x2000x1850 mm

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 13,800 h, AMADA ASTRO II 100 NT bending cell Automatic bending/folding cell - press brake with bending robot Manufacturer: AMADA Type: ASTRO 100 NT Year of construction: 2007 Hfsdpfexgbmcex Afijn Condition: used Control: AMNC II PC Switch-on hours: 38536h Automatic operation: 13739h Pressing force: 100 tons bending length: 3000 mm Tool clamping: AMADA, standard Clearance between uprights: 2700 mm Projection: 415 mm Stroke: 200 mm Installation height: 500 mm Adjustment range backgauge: 600 mm Width of the work table: 60 mm

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Used automatic band saw Cutting area: (round) 700mm (rectangular) 700 x 800mm Saw band: 7600 x 50 x 1.6mm Saw band drive: 7,5kW Hydraulic drive: 2,2kW Hfsdpfx Aovbvr Hjfisn Total weight: 6000kg