Used Safan Press Brake for sale (47)

Condition: excellent (used), Year of construction: 2005, operating speed: 10 mm/s, reverse speed: 120 mm/s, working width: 3,100 mm, bending force (max.): 120 t, distance between stands: 2,550 mm, control type: CNC control, Max. bending length 3100 mm Distance between column 2550 mm Max. pressing force 120 T Dis. Beam - Table 470 mm Beam stroke 180 mm Troth beam 400 mm Approch speed 200 mm/min. Working speed 10 mm/min. Return speed 120 mm/min. Adjustment X-Axis back gauge 1000 mm Dkodjxyw Sbjpfx Albst Number of controlled axis Y1 / Y2 / X/ Z1 / Z2 / R-Central Control TS1 Crowning Yes Hydraulic toolclamping Yes Power 7.5 kW

Condition: used, Safan 120-4300 TS-1 CNC Pressbrake Year 2004 Pressing Force 120 Ton Bending Length 4,300 mm Distance between Uprights 3,600 – 3,700 mm Maximum Stroke 180 mm Open Height (Table to Ram) 510 mm Throat Depth 400 mm Table Width 160 mm Main Motor Power 7.5 kW Control System Safan TS-1 CNC Number of Controlled Axes Typically 4 Axis (Y1, Y2, X, R) Electrical Supply 400V / 3 Phase Machine Weight Approx. 11,700 – 12,300 kg Dodpezdgnbefx Albokt Machine Dimensions (L × W × H) Approx. 4,500 × 1,650 × 2,900 mm

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, pressing force: 80 t, stroke length: 290 mm, operating speed: 90 mm/s, table height: 950 mm, throat depth: 1,000 mm, total length: 3,450 mm, total width: 1,820 mm, total height: 2,510 mm, overall weight: 6,800 kg, controller manufacturer: Safan, controller model: TS1, working width: 2,550 mm, bending force (max.): 80 t, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 2,700 mm, installation height: 1,050 mm, warranty duration: 3 months, control type: CNC control, actuation type: electric, Equipment: documentation/manual, emergency stop, foot remote control, safety light barrier, SAFAN E-Brake Press Brakes are a series of machines equipped with electric drives. Lenze servo motors, controlled by inverters from the same manufacturer, enable fast and reliable system performance over many operating hours. Additionally, the machine only consumes electrical energy during the downward stroke of the ram. The upward movement of the ram is achieved by the force of springs. During standby, the energy consumption is minimal, as there is no hydraulic pump motor maintaining pressure, unlike hydraulic press brakes. Power consumption is estimated to be up to 70% lower than with conventional hydraulic press brakes. Dkedjut S E Nspfx Albet SAFAN E-Brake Servo-Electric Press Brake Force: 800 kN (80 tons) CNC Controlled Axes: Y1-Y2-X-R-Z1-Z2 Ram Stroke: 290 mm Open Height (Daylight): 590 mm Upper Beam Approach Speed: 90 mm/s Upper Beam Accuracy: +/- 0.01 mm Maximum Backgauge Finger Speed: 350 mm/s Maximum Backgauge Range (third reference point, X-axis): 1000 mm Hydraulic Upper Tool Clamping: WILA Connected Load: 11 kW Machine Weight: 6,350 kg Machine Width: 3,450 mm Machine Depth: 1,820 mm Machine Height: 2,510 mm Power Supply: 3/N/PE 50Hz – 400/230V Servo-electric drive (no hydraulic system) Drive transmission via belts

Condition: ready for operation (used), Year of construction: 2019, pressing force: 82 t, stroke length: 300 mm, overall weight: 7,000 kg, number of axes: 4, This full electric drive SAFAN E-Brake Premium 80-2550 was manufactured in 2019. It features a pressing force of 80 tons and a bending length of 2550 mm, ensuring robust performance for various applications. The machine is equipped with a maximum stroke of 300 mm and a backgauge with 4 fingers for enhanced precision. If you are looking to get high-quality bending capabilities, consider the SAFAN E-Brake Premium 80-2550 press brake we have for sale. Contact us for further details. • Power supply: 3 x 400 V, 50/60 Hz, N/PE • Connected load: 11 kW • Axis configuration: 4 CNC axes (Y1, Y2, X, R) • Manual Z-axis adjustment • Backgauge with 4 fingers • Condition: Very good, fully operational, regularly serviced and maintained • Note: Tooling is not included • No crowning needed Dsdozd Uv Sepfx Albekt • Manual, quick-release tool clamping system Promecam Advantages • Full electric drive • Up to 30% higher productivity • Up to 50% energy saving • No harmful hydraulic oil, low CO2 emissions • Noiseless operation • Full working length backgauge Technical Specification Bending Length 2550 mm

Condition: good (used), Year of construction: 2005, Gebruikte 3-meter CNC-kantbank van Safan Model: H Brake 120 3100 Bouwjaar: 2005 Capaciteit: 3100 x 120 ton CNC-besturing van de Y1, Y2, X, XDelta, R, Z1 en Z2 assen WILA nieuwe standaard gereedschapsklem Geüpgrade ESA grafische controller Lazersafe lasersysteem Dsdezul Erspfx Albokt

Condition: good (used), Year of construction: 2011, functionality: fully functional, We recommend a personal inspection to discuss the machine's details in greater depth. Dsdpfx Ajzpd Etelbjkt

Condition: ready for operation (used), Year of construction: 2017, pressing force: 51 t, stroke length: 300 mm, overall weight: 4,750 kg, number of axes: 4, This full electric SAFAN E-Brake B 50-2050 was manufactured in 2017. It features a maximum pressing force of 500 kN and a bending length of 2050 mm. The machine includes a programmable backgauge with a maximum stroke of 550 mm and a robust weight of 4750 kg. If you are looking to get high-quality bending capabilities, consider the SAFAN E-Brake B 50-2050 press brake we have for sale. Contact us for further details. • Control unit: EC 20 • Q-dimension: 650 mm • Upper beam stroke: 300 mm • Speeds: • Approach: 110 mm/s • Bending: 10 mm/s • Bending with light curtain: 10 mm/s • Return: 110 mm/s • Backgauge: • Maximum stroke: 550 mm • Maximum speed: 350 mm/s • Programmable axes: X, R • Mechanical axes: Z1, Z2 • 4 fingers • Tool clamping: • Upper: European Style adapter • Lower: OB-S-3 table with mechanical clamping • Front supports: Standard, load capacity 25 kg each • Safety: • Light curtain: 28.5 mm gap, programmable, vertical, fixed • Stopping time of upper beam: < 92 ms • Minimum safety distance: 185 mm • Electrical: • Power supply: 3 × 400 V / 50–60 Hz / N / PE • Installed power: 11 kW Advantages • Full electric drive • Up to 30% higher productivity • Up to 50% energy saving • No harmful hydraulic oil, low CO2 emissions Dodpszdkvzofx Albskt • Noiseless operation Technical Specification Bending Length 2050 mm

Condition: good (used), Year of construction: 2008, functionality: fully functional, Well-maintained, used E Brake by Safan Type E Brake 100 3100 Capacity 3100 x 100 tons Y1, Y2, X, R, Z1, and Z2 CNC controlled Manual crowning Hydraulic Wila NS top clamp Dkedpjzbhk Eefx Albst

Condition: excellent (used), Year of construction: 2005, operating speed: 10 mm/s, reverse speed: 120 mm/s, working width: 3,100 mm, bending force (max.): 120 t, back gauge travel distance Z-axis: 1,000 mm, control type: CNC control, Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Dsdpfxexzf Dzj Albjkt Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X / Z1 / Z2 / R-Central Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2004, Used small press brake by Safan Type: H Brake 90 1600 TS1 Capacity: 1600 x 90 tons TS1 CNC control Year of manufacture: 2004 Y1, Y2, X and R axes CNC controlled Dsdpfsy Atwzjx Albjkt Wila New Standard top clamping Wila 13 mm lower clamping (hydraulic clamping) Light curtain

Condition: good (used), Year of construction: 2004, Used Safan E Brake press brake Dkodpfxeyykk Hs Albst Type: E Brake 50 2050 HS TS1 Capacity: 2050 x 50 ton WIla clamping with 1 set of tools TS1 CNC control Y1, Y2, X, R, Z1 and Z2 CNC controlled HS High Speed version

Condition: used, Year of construction: 1998, Used 2500 mm bending machine by Safan Type: SMK 50 2550 TS1 Capacity: 2550 x 50 tons TS1 CNC control Djdezvyg Hspfx Albokt Y1, Y2, X, R, Z1 and Z2 Year of manufacture: 1998

Year of construction: 2002, condition: ready for operation (used), A repair-required Safan CNC press brake is available. Working width: 2050mm, press force: 400kN, ram stroke: 180mm, installation height: 450mm, closing speed: 90mm/s, working speed: 20mm/s, machine dimensions X/Y/Z: approx. 3000mm/1500mm/2500mm, weight: approx. 5000kg. The tool clamping system of the machine is defective. Documentation available. An on-site inspection is possible. Dsdpfsyz Anaex Albskt

Condition: good (used), Pressure 110 Ton Edge length 3100 mm Year of construction 1990+ retrofit Stand width 2600 mm Dkodpfx Alsw Hx Rzjbet Steered axles Y1,Y2,X axis Control Esa S630 control Including Wila Sealing stamp

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Dedpfoxpqy Dex Albjkt Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 1301, power: 11 kW (14.96 HP), pressing force: 150 t, stroke length: 200 mm, table width: 100 mm, clearance between the columns: 400 mm, total length: 5,200 mm, total width: 1,730 mm, total height: 3,240 mm, overall weight: 10,500 kg, Equipment: CE marking, Adjustable sheet metal support arms, front side Parking station for sheet metal support arms, left side WILA crowning system Under power Max. bending length: 3100 mm Distance between uprights: 2550 mm Max. pressing force: 150 tons Distance to table mount: 590 mm Max. stroke: 200 mm Table width: 100 mm Upright overhang: 400 mm Descent speed: 300 mm/min Working speed: 10 mm/min Return speed: 120 mm/min X-axis range: 0 - 1000 mm Number of controlled axes: 6 Crowning: Yes Power: 11 kW Length: 5200 mm Width: 1730 mm Height: 3240 mm Dedpfezl Ahrox Albjkt Weight: 10500 kg

Condition: good (used), Year of construction: 1991, Used press brake from Safan Type CNCS 110 4300 Dodpfxsza T Dbj Albjkt Capacity 4300 x 110 tons Control system updated, ESA CNC control Y1, Y2 and X axes CNC controlled Equipped with a flat-bedding system / bending / hemming function Includes a set of tools

Condition: used, Year of construction: 1993, Used 3 meter CNC press brake by Safan Model: CNCL 80 3100 Capacity: 3100 x 80 tons Y1, Y2, and X axes CNC controlled CNC crowning Dksdpfx Aloy Nydzobet Flat pressure table Year of manufacture: 1993

Condition: used, Year of construction: 1986, - incl. various bending tools - year of manufacture: 1986 Specifications - Capacity: 800 kN - Bending length: 2550 mm - Throat depth: 250 mm - Passage: 2050 mm - Stroke: 140 mm - Stopping time: 140 ms - Backgauge travel: 600 mm - Operating pressure: 300 bar Dkjdpfx Aoxdc A Hslbet - Motor power: 5.5 kW - Operating voltage: 400 V - Dimensions (W x H x D): approx. 3400 x 2600 x 1300 mm - Weight: 4800 kg

Condition: used, Year of construction: 1981, total length: 3,750 mm, total width: 2,250 mm, total height: 1,700 mm, Colour: Grey Weight: 5.500 kg Dkodpfxeyf Hhwe Albot - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: B5896 - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Backgauge type: Electric - Backgauge depth [mm]: 1100 - Sheet support system: None - Finger guard: Fixed - Angle adjustment: Manual - Blade gap adjustment: Manual - Table type: Standard table - Transport dimensions: 3750mm x 2250mm x 1700mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1997, total length: 4,200 mm, total width: 2,200 mm, total height: 2,000 mm, Colour: Cream Weight: 13.500 kg Cutting bench, cutting shear, Guillotine shear Type: Hydraulic Type: Conventional Manufacturer: Safan Type: HVR 430-6 Year: 1997 Dedpfx Ajzlytljlbjkt Max. working width: 4300mm Max. sheet thickness: 6mm Electric backgauge 1000mm + stacking-station Motor-power: 15kW Machine-dimensions: 5200x2200x2000mm Machine-weight: 13500kg - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 15.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 4300 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Motorized - Table type: Ball-bearing table - Options: Digital readout - Transport dimensions: 4200mm x 2200mm x 2000mm (l x w x h) - Transport weight [kg]: 13500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1989, total length: 3,500 mm, total width: 1,800 mm, total height: 2,200 mm, Manufacturer: Safan Type: VS 310-10 Cutting width: 3100mm Dkodpfx Ajwnhivjlbot Max. Thickness: 10mm Motor-power: 15kW Machine indicated cutting line, but is without backgauge. - Year: 1989 - Documentation available: No - CE certificate present: No - Transport dimensions: 3500mm x 1800mm x 2200mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Hydraulic pump, hydraulic unit, hydraulic container, hydraulic tank Dkodpfx Aergtd Uelbst -Manufacturer: Safan, hydraulic container from press brake type UC 110-3100 -Level indicator: sight glass -Total dimensions: 1950/540/H485 mm -Weight: 69 kg

Condition: good (used), Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Schuster, transformers from press brake Safan type UC 110-3100 -Type: GLD11-3870 1mH 100A -Type: TEK-4191 500VA -Type TUK-4450 2 kVA -Type DK-3449 750 VA -Techn. Data: see nameplate photos -Levy/Price: complete -Total dimensions: 405/290/H255 mm Dkodpfx Aorgtfgelbjt -Weight: 51 kg

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Sauer, hydraulic unit from guillotine shears SafanTyp VS 255-4 Dkedji Dudkepfx Albot -Hydraulic pump: Sauer Type 4 P 023 LM 929 -Motor: rotor 5.5 kW / 1450 rpm -Hole distance: 215/140/Ø12 mm -Individual components: see photos -Dimensions: 735/350/H300 mm -Weight: 88 kg