Year of construction: 2021, condition: used, machine/vehicle number: 117500730004, Temperature control unit by Regloplas, used and untested. The device is intended for applications in mold temperature control, injection molding, and industrial process engineering. It operates as a dual-circuit system with the RT100 control unit. The medium used is pressurized water, with a maximum supply temperature of 160 °C. Heating capacity is 38 kW, and pump performance is 2 x 60 l/min at 6.0 bar. The unit is fitted with two pumps (CY-4281.0823). Year of manufacture: 2021. Total weight: 230 kg. Ncodey Suhyjpfx Adljt

Condition: used, machine/vehicle number: 371353, Temperature control unit from manufacturer Regloplas, used and untested. The device is designed for tool temperature regulation, injection molding, and industrial process engineering applications. It operates as a multi-circuit system featuring the RT 45 control unit and has two separate circuits. The unit uses oil as the heat transfer medium, with a maximum flow temperature of 300 °C. Heating output is 27 kW, pump capacity is 60 l/min at 3.5 bar. Year of manufacture is unknown. Total weight is 265 kg. Nedpfoy Subyjx Adloct

Condition: used, machine/vehicle number: 0237000916, Temperature control unit by manufacturer Regloplas, used and untested. The device is suitable for tool temperature control, injection molding, and industrial process engineering applications. It operates as a multi-circuit system with the RT50 control system and features 2 circuits. Oil is used as the heat transfer medium; the maximum supply temperature is 300 °C. Heating power is 27 kW, pump output is 60 l/min at 3.5 bar. Year of manufacture is 2004, total weight is 265 kg. Nsdpjy Subgsfx Adloct

Operating hours: 38,526 h, condition: used, machine/vehicle number: 23-06757-2, Temperature control unit from the manufacturer Tool-Temp, used and untested. The unit is designed for mold temperature control, injection molding, and process engineering applications. It operates in a single-circuit system with the TT-380 controller. The medium used is oil*, with a maximum supply temperature of 360°C*. Heating capacity is 24 kW*, and pump performance is 90 l/min at 5.5 bar*. The unit is fitted with a K21R 90 S 2 motor. Recorded operating hours are 38,526; year of manufacture is unknown. Nodey Suavspfx Adlect

Operating hours: 16,982 h, condition: used, machine/vehicle number: 24-02577-3, Temperature control unit from manufacturer Tool-Temp, used and untested. The unit is intended for applications in tool temperature control, injection molding, and process engineering. It operates in a single-circuit system and is equipped with the TT-380 control system. Designed for use with oil*, with a maximum supply temperature of 360°C*, a heating capacity of 24 kW*, and a pump capacity of 90 l/min at 5.5 bar*. Year of manufacture is unknown; operating hours are indicated as 16,982. Accessories are limited to an operating hours counter. Ncsdpsy Suaijfx Adljt

Operating hours: 13,241 h, condition: used, machine/vehicle number: 24-02577-4 / TT-380, Temperature control unit by Tool-Temp AG, used and untested. This device is suitable for tool temperature regulation, injection molding, and process engineering applications. Operates with oil and water as heat transfer media in a single-circuit system. Maximum supply temperature is 360°C (oil) or 90°C (water), with a heating capacity of 24 kW. The pump delivers up to 90 l/min at 6.0 bar; the control system is MP-888. Operating hours are specified at 13,241, year of manufacture unknown. Accessories include a digital hour meter, analog pressure gauge, transport castors, and crane lugs for loading. Ncjdey St Urspfx Adljt

Year of construction: 2002, condition: ready for operation (used), Clamping force: 1600kN, tie bar spacing: 570x520mm, platen dimensions: 810x805mm, max. mould diameter: 804mm, rotary table diameter: 735mm, min. installation height: 300mm, opening stroke: 650mm, opening force: 84kN, tie bar diameter: 80mm, max. daylight opening: 950mm, ejector force: 41.2kN, ejector stroke: 200mm, oil tank volume: 400l, standard drive power: 37kW, hydraulic operating pressure: 240bar, control system: Battenfeld Unilog B4, weight: 7.8t. An on-site inspection is possible. Ncjdpfxjy T Sdzs Adlot

Condition: good (used), Year of construction: 2021, functionality: fully functional, power: 1.1 kW (1.50 HP), Simar FN 2003 Material Handling Device Motor power: 1.1 kW (brush motor) Power supply: 230 V / 50 Hz Container volume: approx. 3 – 4 liters Conveying capacity: approx. 60 – 100 kg/h Njdpsy T N Azjfx Adlsct Hose connection diameter: 38 mm (standard) Filtration: Polyester filter with automatic cleaning Simar FDX-2 Dye Dispenser Drive type: Stepper motor (high speed repeatability accuracy) Power supply: 230 V / 50 Hz Speed: Continuously adjustable (depending on the control unit, typically 0.1 – 200 rpm) Dye container capacity: approx. 5 liters

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 310368, Type: P160/9/SG51/1K/RT45 Output: 9.6 kW Maximum operating temperature: 160 °C Medium: Water Temperature control unit Two units available Nsdpfx Aoy Aghysdloct Price: 1050 EUR per unit

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, The line includes: Ncodpfxjyc Rtxs Adlst - Main extruder: BA130 (Cobra), year of manufacture 2008 - Co-extruder: CM65, year of manufacture 2008, sold for parts - Embosser, cooling tank, nailer, puller, perforator, guillotine – all year of manufacture 1996 TECHNICAL DATA – BA130 Extruder (Cobra) - Main screw: Ø130 mm, length 26 L/D - Center distance: 1050 mm - Screw material: XALOY 41CrAlMo7, hardness 1000 HV - Gearbox: 1:31:7 R - Thrust bearing: 2 020 000 N - Barrel heaters: 74.6 kW (7 heating zones, 6 cooling zones) - Main motor: 205 kW, 1460 rpm - Degassing: pump 4 kW, 100 m³/h, vacuum 700 Hg - Feeders: 2x motor 2.2 kW, ratio 1:25:4 R, screw speed 112 rpm Technical condition: The line is operational and ready for production The configuration allows for the complete siding production process – from granulate to finished profile Individual price quotation and on-site machine demonstration available.

Condition: used, functionality: fully functional, Plastic Granulation Line + for Spare Parts The line includes: -Extruder: CINCINNATI MILACRON CM65HP, year of manufacture 1996 Ncedpsyda Egjfx Adlst -Granulating head -Granulate cooling system -Cyclone: GAMART -Raw material pneumatic conveying system ADDITIONAL EQUIPMENT -Single-screw co-extruders – total of 9 units -Raw material transport: -Pneumatic (powders, granules) -Mechanical (screw conveyors, 2x chain-type redler conveyors) -2 x trough mills – for grinding PVC profiles Technical condition: equipment is fully operational, currently in use in production Applications: -Plastic granulation (PVC, other types) -Co-extrusion Documentation and photos available upon request.

Condition: ready for operation (used), functionality: fully functional, Fully equipped plastic processing line, including: - Main extruder: BA92 NOVEL - Co-extruder: ROYAL MACHINE, model 253-070-000, mounted on a support column. The line consists of several components. - Suitable for co-extrusion applications – e.g., multi-layer profiles, strips, technical components TECHNICAL DATA – BA92 Extruder (NOVEL) - Screw: Ø92 mm, length 24 L/D - Type: B60S4; VB92-24-005 - Speed range: 3.3 ÷ 33 rpm - Barrel: 34CrAlNi7 steel, hardness 1000 HV - Gearbox: ratio 1:63.4 R - Thrust bearing: 1,170,000 N - Heating zones: 6 - Cooling zones: 4 - Motor: 63.8 kW, DC, 210–2100 rpm - Venting: 2.2 kW pump, 36 m³/h, vacuum 700 Hg - Feeder: 1.2 kW DC motor TECHNICAL DATA – ROYAL MACHINE Co-extruder - Screw: Ø1¾", length 21D, compression ratio 2:1, twin-flighted - Barrel material: AISI 4140 steel (bimetallic barrel 2” O.D. x 1¼” I.D.) - Gearbox: ROSSI RCI 80 U03A, ratio 1:16.4 + belt 1:1.65 (total ratio 1:27) - Drive belt: type 3VX560, 3 pcs. - Thrust bearing: load capacity 20,000 kg - Heating: 6.9 kW, 3+1 heaters - Cooling: 1/16 HP, 3 fans - Motor: POWERTEC Frame 184 TC, 5 HP, 0–1750 rpm Condition: complete, fully operational line, ready for operation Application: plastic processing in co-extrusion processes Technical documentation available upon request. Includes additional spare parts. Njdpfx Asyc R U Asdlsct

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, Each line includes: • Main Extruder: BA105 AMUT, year of manufacture 2004 • Single-screw Co-extruder: ROYAL EUROPA (Canada), year of manufacture 2005 • Raw material pneumatic conveying system • Cooling table with tank (AMUT NERG10, 10 m), year 2004 • Puller-saw (TP25, 7 m), year 2004 • Discharge table _____ TECHNICAL DATA – BA105 AMUT Extruder • Screw: Ø105 mm, length 24 L/D • Type: PCD90WEF; VBM105-24-007 • Speed range: 2.66 ÷ 26.6 RPM • Screw material: alloy steel 41CrAlMo7, hardness 1000 HV • Gearbox: ratio 1:65.6 R • Thrust bearing: 1,400,000 N • Barrel heaters: 42.92 kW (7 heating zones, 4 cooling zones) • Main motor: 60 kW, 1750 rpm • Venting: 2.2 kW pump, 30 m³/h, vacuum 700 Hg _____ TECHNICAL DATA – ROYAL EUROPA Co-extruder • Type: 253-100-000, column-mounted Nodpfeyc R Aaox Adljct • Screw: Ø1¾", length 21D, compression ratio 2:1, double flight • Screw and barrel material: AISI 4140 steel • Bimetallic barrel: Ø3" O.D. / Ø1¾" I.D. • Screw hardness: 50–52 RC Gearbox: • Type: ROSSI RCI 100 U03A • Ratio: 1:15.2 + belt 1:1.65 (total 1:25) • Belt type: 3VX600 (4 pcs.) Heating and cooling: • Heating power: 8.9 kW • Heaters: 4+1 • Cooling: 1/16 HP, 4 fans Motor: • POWERTEC Frame 215 TC • Power: 10 HP • Speed range: 0–1750 rpm Technical condition: Both lines are complete and fully operational Ready for profile production using co-extrusion technology Possibility to sell one or both lines, depending on buyer’s requirements On-site inspection available. Documentation and photos provided. It is possible to purchase one line for €80,000.00

Condition: used, Year of construction: 2003, operating hours: 39,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ARBURG Typ: 420C1300-350-60 Baujahr: 2003 Schließkraft: 130 Tonnen Holmabstand 420 x 420 mm Schnecken DN 1: 35 mm Spritzteilgewicht in PS: 127 g Schnecke DN 2: 25 mm Ncsdpfsy Snapox Adljt Spritzteilgewicht in PS: 45 g Steuerung: Selogica Ausstattung: .Kernzug -Roboter

Condition: used, Year of construction: 1992, operating hours: 17,000 h, functionality: fully functional, clamping force: 40,000 kN, screw diameter: 240 mm, clearance between the columns: 2,100 mm, injection pressure: 1,500 bar, injection weight: 48,000 g, ejector stroke: 700 mm, total length: 26,000 mm, total width: 5,000 mm, total height: 7,000 mm, overall weight: 380,000 kg, MANUFACTURER REMU Model / Type RM 4000 Enjeksiyon Ünitesi / Injection Unit Üretim Yılı / Production Year 1992 Üretim Yılı / Made In Italy Kalıp Sıkıştırma Kuvveti / Mould Clamping Force (kN) 40000 Kolon Arası Mesafe / Space Between Tie Bars (mm) 2100 X 2100 Pompa Motoru / Pump Motor kW Vida çapı / Screw Dıameter (mm) 240 Enjeksiyon Basıncı / Injection Pressure (bar) 1500 Maks. Short Ağırlığı / Maks. Shot wightPS (gr) 48000 Isıtma Kapasitesi / Heating Capacity (kW) 235 Pompa Motoru / Pump Motor kW 595 Toplam Güç / Total Power (kW) 830 Sıkıştırma Ünitesi / Clamping Unit Mak. Kalıp Kalınlığı / Max. Mould Thickness (mm) 2000 Min. Kalıp Kalınlığı /Min. Mould thickness(mm) 800 Ejektor stroke (mm) 700 Maksimum Mengene Açıklığı / Max.Daylight (mm) 4500 Yağ Tankı Kapasitesi / Oil Tamk Capacity(lt) 9000 Makine Ölçüleri / Machine Dimension LxWxH(m) 26*5*7 Makine Ağırlığı / Machine Weight(ton) 380 Vida Stroğu / Screw Stroke (mm) 1400 Mak. Erimiş Plastik Miktarı / Max.Shot Molten plastic weight(gr) 34560 "Mak. Atış ağırlığ PE /Max. Shot weight per 1mm (gr)" 24,68571429 Gerçek Değer / Actual Value (gr/h 26,8 Maks. Enjeksiyon Ağırlığı PE (gr) 35136 Maks. Enjeksiyon Ağırlığı PP (gr) 35136 Makine Meme radüsü / Machine Nozzle Radius R34 Sabit Flanş Ölçüsü / Fixed Side Flange Size ᴓ300 Hareketli Taraf Flanş ölçüsü / Moving Side Flange Size ᴓ250 Hava / AİR (sabit - hareketli) 2+4 Hydraulic Cores 4+4 Kalıp Frigel su bağlantıları / Mold Frigel Water Connections 2'' Nodpfjylva Nsx Adlect Kalıp Sıcak Yolluk Kontrol ( adet ) /Mold Hot Runner Control (pcs) 40 Valfgate sistemi / Valvegate System (pcs) 16 (Aktif) manyetik Plaka / Magnetic Plate var "Kalıp Taşıma Kapasitesi ( Sabit - hareketli ) / Mold Carrying Capacity (fixed - moving) (tons)" 21,8-18,7 Robot var

Condition: used, Year of construction: 2011, operating hours: 13,000 h, functionality: fully functional, clamping force: 39,240 kN, screw diameter: 245 mm, clearance between the columns: 2,250 mm, injection pressure: 1,200 bar, injection weight: 47,685 g, overall weight: 320,000 kg, heating capacity: 354 kW (481.31 HP), MANUFACTURER REAL PRESS Model / Type RP 4000 T Üretim Yılı / Production Year 2011 Ncsdpfsylwz Isx Adlot Üretim Yılı / Made In Italy Kalıp Sıkıştırma Kuvveti / Mould Clamping Force (kN) 39240 Kolon Arası Mesafe / Space Between Tie Bars (mm) 2250*2250 Vida çapı / Screw Dıameter (mm) 245 Enjeksiyon Basıncı / Injection Pressure (bar) 1200 Maks. Short Ağırlığı / Maks. Shot wightPS (gr) 47685 Isıtma Kapasitesi / Heating Capacity (kW) 354 Pompa Motoru / Pump Motor kW 132+132+132+30 Toplam Güç / Total Power (kW) 790 Mak. Kalıp Kalınlığı / Max. Mould Thickness (mm) 2200 Min. Kalıp Kalınlığı /Min. Mould thickness(mm) 1000 Makine Ölçüleri / Machine Dimension LxWxH(m) 22×45×50 Makine Ağırlığı / Machine Weight(ton) 320 Vida Stroğu / Screw Stroke (mm) 245 Mak. Erimiş Plastik Miktarı / Max.Shot Molten plastic weight(gr) 34333,2 "Mak. Atış ağırlığ PE /Max. Shot weight per 1mm (gr)" 140,1355102 Sabit Flanş Ölçüsü / Fixed Side Flange Size ᴓ250 Hareketli Taraf Flanş ölçüsü / Moving Side Flange Size ᴓ250 Robot VAR

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, clamping force: 9,500 kN, screw diameter: 120 mm, ejector stroke: 300 mm, opening stroke: 1,900 mm, TECHNICAL DETAILS Clamping force: 9,500 kN Opening force: 665 kN Tie bar distance: 1,400 x 1,150 mm Clamping plates: 1,960 x 1,710 mm Opening stroke: 1,900 mm Min. mould height: 500 mm Max. mould height: 1,200 mm Max. opening width: 2,400 mm Ejector stroke: 300 mm High-performance screw HPS-UN, diameter: 120 mm Nozzle radius: 30 mm Nozzle opening: 12 mm Screw diameter: 120 mm Shot weight (HDPE): 5,420 g Shot volume: 7,634 cm³ Specific injection pressure: 2,257 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,770 x 3,420 x 2,750 mm Ncjdsy T H A Eepfx Adlet Machine weight: 61.5 t

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 130 mm, ejector force: 139,000 N, opening stroke: 1,030 mm, plate width: 1,500 mm, plate height: 1,620 mm, TECHNICAL DETAILS Clamping force: 8,000 kN Plate size (h x v): 1,620 x 1,500 mm Clear width between tie bars (h x v): 1,120 x 1,000 mm Mold height: 500 - 1,050 mm Maximum plate distance: 2,080 mm Opening stroke: 1,030 mm Ejector stroke: 350 mm Ejector force: 139 kN Mold weight: 7,200 kg Injection system Screw diameter: 130 mm Njdpoy T Hz Iofx Adljct Displacement: 7,300 cm³ Injection weight (PS): 6,640 g Injection pressure: 1,300 bar Screw length: 20 l/d Electrical and hydraulic equipment Rated power of pump motor: 110 kW Heating power: 79 kW Oil tank capacity: 1,300 L MACHINE DETAILS Machine dimensions LxWxH: 12.3 m x 2.7 m x 2.7 m Total weight: 33,500 / 9,700 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8673 0023, clamping force: 15,000 kN, screw diameter: 145 mm, injection pressure: 1,454 bar, plate width: 1,880 mm, plate height: 2,150 mm, Regularly maintained machine - see repair history TECHNICAL DETAILS Clamping force: 15,000 kN Mounting plate dimensions (H x V): 2,150 mm x 1,880 mm Clear distance between columns (H x V): 1,500 mm x 1,250 mm Min./Max. mold height: 700 mm - 1,400 mm Maximum opening distance: 2,900 mm Control: DIAS Injection unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight: 9,880 g Injection pressure: 1,454 bar Ncjdpfx Adoy T Hy Dslst Electrical and hydraulic equipment Rated power of pump motor: 165 kW Heating power: 97 kW MACHINE DETAILS Net weight with control cabinet: 21,000 t Dimensions (L x W x H): 14.4 m x 3.4 m x 2.9 m Electrical connection Main connection: 3 × 400 V, 50 Hz Control voltage: 3 × 400 V, 50 Hz Repair history 2010: New screw with RSP and tube 2015: New Ibed 2015: New wiring board 2017: Motor and pump 2 new 2017: Injection cylinder BS piston rod new with seals 2017: Circulation pump oil cooler replaced 2017: Teachbox replaced (Rob) 2018: Pumps P 1 + 3 replaced (at 65,800 h) 2018: Hydraulic oil change 2019: New injection valve 2019: Dosing inverter overhauled by Fa. Eichler 2021: Motor P1 new 2022: New RSP EQUIPMENT - Wittmann W 753 Robot - 2008 - Cage and conveyor belt

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,029 h, functionality: fully functional, machine/vehicle number: 51561, clamping force: 2,300 kN, screw diameter: 135 mm, injection pressure: 1,600 bar, opening stroke: 3,800 mm, tool height: 1,890 mm, TECHNICAL DETAILS Clamping force: 2,300 kN Platen size (H x V): 2,900 x 2,500 mm Tie bar distance (H x V): 2,000 x 1,600 mm Minimum/maximum mould height: 700 mm/1,890 mm Maximum opening stroke: 3,800 mm INJECTION UNIT Screw diameter: 135 mm Shot volume: 8,870 cm³ Shot weight (PS): 8,071 g Njdpfjy T Hx Hex Adloct Injection pressure: 1,600 bar MACHINE DETAILS Net weight (with control cabinet): 113 t + 18 t Operating hours: 70,029 h

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 424227, clamping force: 4,200 kN, screw diameter: 80 mm, injection pressure: 1,829 bar, injection weight: 1,304 g, opening stroke: 1,400 mm, TECHNICAL DETAILS Clamping force: 4,200 kN Platen size (H x W): 1,270 x 1,200 mm Tie bar spacing (H x W): 800 x 800 mm Minimum mold height: 380 mm Maximum mold height: 1,020 mm Max. opening stroke: 1,400 mm Screw diameter: 80 mm Injection volume: 1,433 cm³ Shot weight: 1,304 g (PS) Max. injection pressure: 1,829 bar Max. temperature: 375 °C Ncodpfey T Hwijx Adlot MACHINE DETAILS Supply voltage: 400 V Phases: 3~ Frequency: 50 Hz Total current consumption: 237 A Fuse rating: 250 A Pump power: 75 kW Heating power: 36 kW Dimensions & Weight Dimensions (L x W x H): 7.06 x 2.33 x 2.51 m Machine weight: approx. 22,000 kg

Year of construction: 2024, condition: new, This battery filling system is suitable for traction batteries with 12 cells, 24 volts. Price is excluding VAT. Also in stock: battery filling system 24 cells, 48 volts --> 319 ex VAT; battery filling system 40 cells, 80 volts --> 389 ex VAT. Ncsdpjy Sm Irefx Adljt

Condition: good (used), With this jug, you automatically refill your battery with demineralized water. Indispensable! Price includes shipping costs within the Netherlands. Ncodpfxsy Sm Hhe Adlst

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 198346, clamping force: 3,600 kN, screw diameter: 70 mm, injection pressure: 2,000 bar, injection weight: 984 g, opening stroke: 1,400 mm, TECHNICAL DETAILS Clamping force: 3,600 kN Platen size (H x W): 1,040 x 1,040 mm Column spacing (H x W): 720 x 720 mm Minimum mold height: 300 mm Maximum mold height: 300 mm Maximum opening stroke: 1,400 mm Screw diameter: 70 mm Injection volume: 1,078 cm³ Shot weight: 984 g Injection pressure: 2,000 bar MACHINE DETAILS Electro-hydraulic system Rated power of pump motor: 55 kW Heating capacity: 30.3 kW Net weight with control cabinet: 17 t Nodpfxjy T Hrme Adljct

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 138337-100, clamping force: 9,000 kN, screw diameter: 105 mm, injection pressure: 1,931 bar, ejector stroke: 300 mm, opening stroke: 2,100 mm, TECHNICAL DETAILS Screw diameter: 105 mm Screw stroke: 525 mm Screw L/D ratio: 22 Theoretical shot volume: 4,545 cm³ Injection pressure: 1,931 bar Maximum screw speed: 167 rpm Maximum plasticizing rate: 151 g/s Screw torque: 8,000 Nm Nedsy T Hprepfx Adlsct Nozzle travel / nozzle thrust force: 950 mm / 129 kN Injection volume flow rate: 725 cm³/s Injection volume flow rate with double pump (option): 906 cm³/s Air injection volume flow rate with tank (option): 1,812 cm³/s Cylinder heating capacity: 53.9 kW Number of heating zones: 7 Clamping force: 9,000 kN Maximum opening stroke: 2,100 mm Min./Max. tool height: 500 – 1,000 mm Platen size: 1,720 x 1,550 mm Tie bar spacing: 1,200 x 1,000 mm Ejector stroke: 300 mm Ejector force: 165 kN Tool opening force: 300 kN MACHINE DETAILS Pump output: 90 kW Heating capacity: 53.9 kW Oil tank volume: 1,100 l Dimensions & Weight Machine dimensions (L x W x H): 10,100 x 3,400 x 2,700 mm Weight: 35,200 kg