Used Deep drawing machines / thermoforming machines for sale
7
Quotation for second-hand machine
Illig form-, filling- and sealing machine FS 31, machine number: 186, WE 971
Basic machine with the following additional equipment:
- NC equipment Siemens S7, with OP 17 operator panel
- 2-up roll stand for container material including cutting and
splicing device
- automatic joint identification of container material
- separately moved 1 zone contact heater
- male vacuum forming device
- plug assist with pneumatic drive reinforced
- multi-gripper material...
5
Roller die cutter Müller & Kurth TYPE 190, machine number 1489, in a good condition, immediately available
Caith2vgj3
11
The machine was in operation until the last. At present the machine is dismantled and ready for transport.
Machine is especially suitable for serial production of roll material.
Lal7moyl
Deep drawing area: 800mm x 700mm
Maximum tool height: 190mm
Machine has lower and upper heating (ceramic heating element)
Machine is equipped with PLC control which means that machine runs fully automatically.
Machine can also be used for single pieces with manual operation.
To the machine belong various spare p...
1
Thermoforming machine (2.700 x 2.300 mm)
SMA-REF-6193
Type: thermoforming machines
Manufacturer: Cannon Shelley
Model: PF 2621
Year: 1999
Bbdiqniir0
Working range:
2.700 x 2.300 mm
Stroke: 1.000 mm
Condition:
ready for action
unser power
Location: Western Germany
Availability: on demand
3
Make: MARBACH, Year of construction: 12/97, Serial-No.: 065.970.1110, consisting of: 36 cavities, Ø 68 mm, 4-row, for PP, without mould insert
B02a2dahqn
4
From a workshop for the disabled:
Roller die cutter Illig ZSM 60
B9cinilqnk
ZSM 60 year of construction 1988
380 Volt
right-left rotation
10
Quotation for second-hand machine
Illig vacuum forming machine RV 53, # 250, 1988
Basic machine with following additional equipment:
- material roll stand for 1200 mm diameter
- lower heater with cross-row control incl. material sag control
- heating for steel rule die
Bt2lcbnfk3
- stacking station with counting and push-out device
Year of construction: 1988
Condition: ready for operation
Price: on request, ex works, subject to prior sale
5
max. plate size: 2000x1000 mm
max. mold height: 610 mm
voltage: 400 V 50 Hz
total motor power: 2,92 kW
total heating power: 63,3 kW
Bwk7bihfzy
max. permissible air pressure: 10 bar
Bottom heater was renewed at the end of 2017 after damage.
Various clamping frames available.
The machine can be inspected at any time.
All information without guarantee.
Used machine sale without warranty.
4
Heating output: 24.6kW, compressed air supply: 10bar.
Cekokk9i
5
1,0 Piece of Used Flanging Machine
B2q779sfm3
Make: ILLIG
Model: S-BLI-45-01
Year: 1992
Heating Power: 2.0 kW
2
Make: MARBACH, Year of construction: 03/94, Serial-No.: 065.940.0110, consisting of: 32 cavities, Ø 75 mm, 4 rows, for PP, without mould insert
Eizo2nguk
5
Due to low utilization, we would like to sell our UA 200.
B2bm9flvvl
The machine was purchased in 2013 for a large order and was built up and repaired by a specialist company.
Since then, the machine is only in the way.
9
Illig vacuum forming machine, type UA 150/4 g P,
B7eita8vqx
basic machine with following additional equipment:
- plug assist with remote control, digital setting of speed and automatic clamping of plug;
- one additional socket for temperature control units or chiller, main switch reinforced;
- 8-up reinforced cooling blowers;
- 8-up spray nozzle equipment;
- colour screen VDU operating panel;
- including 6-position switching for upper heater and 4-position switching for lower heater, storage ...
Vacuum Form machine for the production of plastic Blister packaging
PS, PVC, PET etc.
Bvuhzs3lyi
- Un-winder
- Top heating plate
- waste windier
- With moveable bottom table
- With a stacking unit.
Forming area (mm): 500 x 350
Film width (mm): 540
Depth (mm): 100
3
Max. heating output: 26.3kW, connected load: 12.1kW, weight: 7.5t.
Pyztl
2
> Top heating with small single radiator via toggle switch
> Underheater large radiator
> Upper stamping unit
Bk89vdm2sl
> Protective grille pneumatically lockable
> 4 cooling fans D05 with spray nozzles
> Automatic preblow and demoulding
3
Make: MARBACH, year of construction: 02/95, serial no.: 065.960.0510, consisting of: 32 cavities, Ø 73 mm, 4-row, for PP, without mould insert
Pwt92
3
Illig vacuum forming machine of the type UA 200/4 g P,
Dx7day
basic machine with following additional equipment:
- 2-cylinder plug assist with 4 synchronized racks, remote
adjustment and digital setting of speed, automatic tool clamping
via 4 locking devices
- 3 vacuum pumps, each 100 m³/h
- material sag control with light barrier above lower heater
- 8-up reinforced cooling fan = 8 x 22 cbm/min
- 8-up spray nozzle device
- central lubrication with hand pump for forming machine
...
3
> Small moulding machine with the format 350x250x90.
> For skinning and blistering of small batches.
> As a sample machine for every company.
> Optionally also with upper punch.
> Further details on request.
> Completely overhauled and newly painted
Hdmmc3b9
2
Make: MARBACH, Year of construction: 05/97, Serial-No.: 065.970.0110, consisting of: 32 cavities, Ø 73 mm, 4-row, for PP, without mould insert
Elv7d8
15
Quotation for second-hand machine VM 054
Illig plate forming machine UA 225/4 g P, #319
Illig plate forming machine type UA 225/4 g P, basic machine with the following additional equipment:
B7ei32vpfy
- Siemens S 7 control system with Siemens OP 37 operating panel
- operating parameters can be stored
- operator guidance with automatic process data calculation including heater layout, including all times, speeds and temperatures
- pneumatic actuation for protective grid
- temperature control co...
2
> Skin machine and blister machine with longitudinal and cross cutter, Euro perforation.
> Completely overhauled and newly painted SB 74c-10 with steel strip punch and residual material take-up. New conveyor belt.
> Size 770 x 505mm.
Bk7shlfib7
> On request also as c-9 or with upper punch.
6
Second-hand quotation VM 037
Illig automatic high-speed pressure former RDM 37/10
Machine with following equipment:
- upper heater: longitudinal row control with separate control cabinet
- lower heater: with full area control and material sag control
- material roll stand with wind-up device and pneumatically operated reel brake
- central lubrication with hand pump
- temperature control for upper and lower tool (Buschjost)
- cam control with rimless punching device
- material transport with ha...
1
> Roller bracket
> Control system Siemens S7
> Top heating
Obgrl
> Max. forming area 775 x 505 mm
> Max. moulded part height 150 mm
> Longitudinal and cross cutters
> completely overhauled and newly painted
15
Quotation for second-hand machine VM055
Illig air pressure forming machine RDM 75 K, #168 with hole punch and stacking unit PLS 75 b, #R11514 and skeletal web granulator RS 75 b, year 2000
- Illig air pressure forming machine RDM 75 K, basic machine with the following essential features:
- material transport with servo drive
- material transport with hardened support bars, central width adjustment and cooling bars for temperature control
- pneumatically operated, automatic spreading device for ...
1
> Packaging machine with 700x500x250mm format.
> In addition a cutting device to separate the packaging (SG 500)
Bk7r8nb9i9
1
> With additional carton applicator.
Fvsdj3ih
> completely overhauled.
1
> Blister machine HSA 50 C RD 50 C incl. cooling unit, tool and pallet set
> all defective parts replaced and repainted
> tested and fully functional
Fvahdkwl
1
> Completely overhauled and newly painted.
Cxvxm0rw
1
> Top heating with pilot radiator control
> Single radiators of the top heating
> 2 cooling fans D05
> Automatic preblow and demoulding
> Documentation and plans in German
> Max. forming area 1210 x 500
> Longitudinal and cross cutter with 6 quick-change squeezing knives
> Euro hole punching device (can be retrofitted at extra charge)
Bk7q7kpozq
> completely overhauled
1
> 2-column stations (electromechanical)
> PP/PVC/PET/PE All materials can be processed
> automatic foil unwinding
> Film suspension for bottom films
> Film transport for multiple gripper and electromechanical drive
> Film gripper bar in the heating and forming area
> Filling section in bridge design
> Filling line extension to approx. 3.000mm
> Package and position control in the punching area
> Package conveyor belt 1.500mm
> Waste cross cutter with waste chute
> SPS control Schleicher KSTS 2K
...
1
> Cut-off saw TS 100 c, with conveyor belt, suction belt, extraction, adjustable treadmill and saw blade.
> 4 hold-down devices, new wheels and new bearings.
> Machine completely overhauled and new painted.
Mvbm9o
> Passage width of 600mm
> Further details on request.
1
> Sealing machine with 4 stations.
> Lift-in and lift-out station.
Bk7qgctx9c
> Further details on request
1
> completely overhauled and newly painted
> Passage width 600mm
Ft3owhst
> roller table
1
> completely overhauled and newly painted
> Passage width 900mm
Bk7pw3hzbp
> roller table
5
ILLIG Universal Thermoformer UA 250 1G with BE 250 sheet / roll, sheet size max. 2500 x 1500mm, forming area max. 2450 x 1450mm, mold height max. 860mm, material thickness max. 12mm
Equipment machine:
> automatic loading including roller block and
Sheeter for additional roll production
> Screen controls
> Upper and lower heating can be regulated via 4 zones
> Automatic pre-blow and demolding
> Vacuum cascade can be set to 5 percentages
Bk3t2p07ya
- table speed, upper punch speed, pre-blo...
Used Deep drawing machines / thermoforming machines
Search Machineseeker now with more than 200,000 used machines:This may be of interest to you
How to receive 100% of our e-mails
Machineseeker still biggest sponsors of 2nd German football league
10 valuable tricks for buying used machines online
Sample sales contract for used machines in nine languages
Morlock Motors official partner of Machineseeker and Truckscout24
Sell now on Machineseeker! Over 250,000 inquiries per month
