Used Plastic Packaging for sale (16,328)

Condition: excellent (used), Complete line direct from Bankrupt company which was filling capsules and tablets into small tubs. Bottlea are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Hnedsw Hz T Eepfx Ah Nsg

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), Hsdpfxsx Tifie Ah Njng - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Year of construction: 2023, condition: new, Main Products Shrink Film ,Packaging Film Hnsdeiy N A Hspfx Ah Neg Usable Raw Materials LDPE, LLDPE, mLLDPE, MDPE, HDPE and their mixtures Film Width Maximum: 1600mm Minimum: 850mm Film Thickness LDPE: 25-100 Micron Die Diameter LDPE: Ø300mm Layer Distribution (A/B/C) %25-%50-%25 Max. Mechanical Speed 150m/min Extruder Melting Capacity 550kg/h ±%10 LDPE, MFI: 0.7g/10min simple formula Maximum Throughput 400kg/h ±%10 Reference Thickness and Width 50Micron - 1400mm Reference Formula Parameters %80 LDPE + %20 HDPE MFI: 0.7-0,3 OPTIONAL EQUIPMENT (not included in the price) Description Qty Price 4 components Gravimetric Dosing System and Line Control 3 set € 51.000,00 6 components Gravimetric Dosing System and Line Control 3 set € 63.000,00 Corona Treater 1 $ 12.000,00

Condition: used, Packaging machine, strapping tool, and automatic strapping machine ORGAPACK Type CT 2650 Strapping machine for plastic strapping Automatic strapping machine, automatic strapping machine for PP strapping Machine No. 1624, built approx. 2010 Table size: 930 x 470 mm Working height: 700 to 800 mm Maximum frame width: 930 mm Maximum frame height: 700 mm Package width: max. 900 mm Package height: max. 680 mm Package width: min. 80 mm Package height: min. 30 mm Strap width: max. 12 mm (installed is 12 x 0.55 mm) Hnodpfsukxwmox Ah Nog Tension force: 10 to 500 N Coil width: 180 mm Power supply: 400 volts, 50 Hz. - Fully automatic strapping machine for PP plastic packaging strapping (polypropylene packaging strapping) - Sealing unit with heat-welded seal (heat wedge seal) - Continuously adjustable strap tension via electric slip clutch - Electric foot switch - Strap dispenser fixed to the side of the machine - Stainless steel table with steel rollers - Mobile on casters - Operating instructions - Included is a roll of plastic packaging strapping 12 x 0.55 mm, Ø 400 mm (black) Function: The strap is located in the outer frame. The strap is automatically wrapped around the object to be packaged (carton) and inserted into the clamping point. The tensioning mechanism is electrically triggered. Once the tension is reached, the strap is welded and separated. The strap then immediately re-runs automatically through the outer frame. Dimensions L x W x H: 1540 x 520 x 1630 mm Weight: 160 kg Good condition

Year of construction: 2016, condition: good (used), functionality: fully functional, HDPE extruder, head diameter 70 and 100 mm, screw diameter 50 mm, width up to 700 mm, 12-30 micron, single winding Hnedpfxjxb A Uqo Ah Neg

Year of construction: 2012, condition: good (used), functionality: fully functional, machine/vehicle number: 1209107, T-shirt bags blocked, width 200-350 mm, length 280-700 mm, thickness 8-30 microns Hnsdpjxb An Dsfx Ah Nog

Condition: used, functionality: fully functional, The MECAPLASTIC S6000 traysealer is an ideal solution for manufacturers looking to optimize their packaging processes. Designed to deliver reliable and durable performance, this machine ensures fast and precise sealing while ensuring optimal protection of packaged products. Thanks to its advanced design, it adapts to various applications, facilitating integration into existing production lines. Hnsdpfxsu Nwy Ee Ah Njg Furthermore, the MECAPLASTIC S6000 traysealer stands out for its efficiency and ease of use. It improves production speeds while reducing manual intervention, minimizing downtime and optimizing throughput. Furthermore, it offers great flexibility by adapting to different types of packaging, making it a versatile choice for the food and other industries. Furthermore, its ergonomic design facilitates maintenance and guarantees long-term use with consistent performance. In summary, the MECAPLASTIC S6000 traysealer combines speed, reliability, and flexibility, offering a complete solution for companies looking to improve their productivity while maintaining quality standards. +n8LEIuS

Year of construction: 2010, condition: excellent (used), functionality: fully functional, The MECA S4000 traysealer is an automatic packaging machine designed to ensure hermetic tray closure. Thanks to its high-performance sealing system, it effectively protects food products from air, moisture, and contaminants, while extending their shelf life. Indeed, this machine helps maintain food freshness and quality, making it an ideal choice for companies looking to improve their packaging processes. Furthermore, the MECA S4000 traysealer is designed for easy integration into various production lines. Furthermore, its versatility and quick tool changeover allow it to adapt to several tray formats, thus optimizing productivity. Furthermore, its ergonomic design and ease of use make it accessible to everyone, even less experienced operators. With easy maintenance and complete cleanability, this machine ensures high hygiene standards. In summary, the MECA S4000 is a robust and efficient solution for companies looking to improve their packaging processes while ensuring optimal product preservation. Technical specifications: Manufacturer: MECAPLASTIC Type: S4000 Year of manufacture: 2010 Speed (cycles/min): up to 6 Automatic Used machine. Pros: Hnodpfx Ahsu Nv Nro Neg Sealing machine, easy to use. Quick tool change. Ergonomic operation. Complete cleanability. p3dpF1Eu

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The all-rounder combines outstanding build quality with a wide range of applications. Our machine also offers intuitive operation to optimize your packaging processes. A high-quality material unwinder with dual automatic roll centering ensures precise material guidance. Furthermore, our active material advance unit guarantees optimal web tension for flawless packaging results. Hnjdpswld Tfjfx Ah Neg The highly powerful brushless motors and user-friendly color touchscreen control system give you maximum flexibility during format changes and greatly simplify your packaging operations. The machine features memory slots for storing machine parameters—up to 50 different products can be saved. For this packaging line, we also offer fully and semi-automatic infeed systems, which can be retrofitted at your request. The machine is available in both directions of operation and features rotary cross-sealing with an electronic overload protection switch for maximum safety. Thanks to its powerful performance, versatility, and technological sophistication, our machine is ideally suited for packaging food items such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift articles. If you wish to optimize your packaging processes with strong production performance and high quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt, 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end seal, single sealing jaw 5. Robust, central fin seal structure 6. Four servo-driven systems: - Active material advance shaft - Center sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in the local language 11. Register mark control 12. Bag length programmable or with fully automatic product length detection 13. Standard operation from left to right Technical specifications: 1. Product length: L40–600 mm 2. Product width: W30-200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 80 products/min 5. Maximum film width: 600 mm 6. Power supply: 1Ph. 220V 50Hz 7. Total power: approx. 4.7 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4300 x 1190 x 1210 mm

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, The system was used for slightly moist and sticky pipe tobacco. It is therefore suitable for all free-flowing products, such as spices, nuts, seeds, gummy bears, and many other kinds of food products. Hjdpfx Asx Avlljh Nsng 14-head multihead weigher with vertical form-fill-seal machine: Weigher: 14 heads, each with 1.6 L volume, 7-inch HMI, MCU control Working platform (1.9 m x 1.9 m x 1.8 m) including ladder and safety railing Z-type bucket elevator: product drop height 3.1 m, total height 3.6 m, 1.8 liter bucket volume Weighing range: 10 - 2000 g Accuracy: ±0.1 g 220V 50/60Hz 1000 W All made of stainless steel (304 SS) Form-fill-seal machine: 120 bags per minute Bag size: W 60-200 mm, L 60-300 mm Maximum film width: 420 mm With SIEMENS PLC control, SIEMENS servo motor, 3-line date printer, 120 mm wide bag former (optionally, we also have a 200 mm wide former, which can be purchased at extra cost), with vacuum and air extraction function for the bags Discharge conveyor for finished products Condition of the system: very good (used) Year of manufacture: 2023, very low operating hours Functionality: fully functional The system was purchased twice at the time due to a temporary increase in product demand. Demand fell again after a short time, so the machine is still almost completely NEW. Spare parts supply for this Chinese system is excellent and the machine runs extremely reliably! ALTERNATIVE to the form-fill-seal machine: We also have a can filling feed system, so the machine can be adapted to fill directly into cans instead of bags. This feed system was built by Wellmann Anlagentechnik GmbH. It can be purchased as an alternative to the form-fill-seal machine. The checkweigher shown in the picture is not included in the offer. The multihead weigher can also be purchased separately for €24,500.

Condition: used, Year of construction: 2009, Case packer from 1993 refurbished by the manufacturer in 2009. Automatic packing of boxes with cardboard group by rows and by stacking in a cardboard box with closure. Max. production: 20 to 30 cycles / minute Nordson Problue4 glue generator Label removal Delna DS 14 History, documentation and electrical diagrams available. Spare parts available. Hnedpfxox R Dq Us Ah Njg Product length 50 - 130 mm Product width 47 - 200 mm Product height 15 - 40 mm Carton length 70-250 mm Carton width 70-250 mm Carton height 40-120 mm

Condition: repair required (used), Year of construction: 2003, functionality: not functional, It is a complete line for film recycling. It was bought together as complete line. Components Hodpox Ddchjfx Ah Nong • Shredder TRI TUR TM 3 model with hydraulic drive and 75 kW motor. • Pre-washing tank for contaminated film. Bottom sludge discharge. Made of stainless steel! • Water grinder L5 650/1000 10 rotating and 4 stationary knives • Centrifuge Mainly available as a single item! Used, in good condition, has not been in operation for a long time, requires repair. The grinder is currently in operation and can be viewed in Dunaújváros(Hungary) Check out our other products. (Re-pelletizing line, chiller...)

Condition: good (used), Plastic sheets, plastic laminate -various sizes Hnedsb A Nwpepfx Ah Njg -Thickness: 6 mm -Outdoor outdoor area: usable -on: 2 pallets -Sale: only complete set -Dimensions: 1450/3100/H340 mm -Weight: 720 kg

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 913 mm, total length: 634 mm, total height: 1,700 mm, warranty duration: 12 months, compressed air connection: 6 bar, overall weight: 200 kg, power: 1.9 kW (2.58 HP), input voltage: 230 V, Semi-automatic tube filling machine. Efficiency up to 13 tubes per minute. Dose from 5ml to 270ml Tube diameter from 19mm to 50mm Tube height from 70 to 210mm Made in Poland Machine available to view and test at the firm's premises. Jedliński Packaging sp. z o.o. ul. Wodna 3 05-090, Raszyn Poland Hjdpfxjxx Uihj Ah Njng

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The versatile all-rounder combines outstanding workmanship with a broad range of applications. Our machine also offers intuitive operation, optimizing your packaging processes. A high-quality unwind unit with double automatic roll centering ensures precise material guidance. Furthermore, our active material feed system guarantees optimal web tension for flawless packaging results. The highly efficient brushless motors and user-friendly color touchscreen control system provide maximum flexibility during format changes, significantly simplifying your packaging operations. The machine is equipped with memory storage for machine parameter settings and can save up to 50 different products. For this packaging line, we also offer fully and semi-automatic feeding solutions, which can be retrofitted upon request. The machine is available with either left- or right-hand operation and features a rotary cross-sealing unit with an electronic overload protection switch for maximum safety. Thanks to its performance, versatility, and technological advancement, our machine is ideally suited for packaging food products such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift items. If you are looking to optimize your packaging processes with high production capacity and superior quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end sealing, single sealing jaw 5. Robust central fin seal structure 6. Four servo drive controls - Active material feed shaft - Central sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. Housing made of stainless steel 304 10. Documentation in the local language 11. Print mark control 12. Programmable bag length or fully automatic product length detection Hnodpfxowld Upj Ah Neg 13. Standard direction: left to right Technical Parameters 1. Product length: L120–500 mm 2. Product width: W30–200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 100 products/min (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1Ph. 220V 50Hz 7. General power: approx. 4.8 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4280 x 1200 x 1230 mm

Condition: excellent (used), Auto pot filling and sealing machine direct from closed soup filling line. Can be supplied with Apple depositors (at extra cost) which were running with it. Hnedpfx Aouzv Dteh Njg

Condition: used, Year of construction: 2004, Manufacturer: PRB Packaging Model: Destratus Year: 2004   Automated system for removing packs of bottles or cartons from a pallet. The equipment continuously feeds empty bottles to the rest of the line. Light curtain. UniOP control panel. History, documentation, and electrical diagrams available. Hnsdpsx R Dqnsfx Ah Nsg

Condition: used, Year of construction: 2003, functionality: fully functional, rotor length: 1,100 mm, For sale P.R.T. shredder used for pre-shredding polyethylene. Italian manufacturer. In good condition. Without standing knives. With hydro drive and with electric control cabinet and stand. Shredder dimension LxWxH 2550 x 1200 x 2460 mm Stand dimension LxWxH 2450 x 1680 x 2700 mm Drive dimension LxWxH 1600 x 1200 x 1300 mm Rotor dimension LxW 1100x700 mm Hnjdpfx Ahox Rqacs Njg Please check our other machines for sale. (Extruder, grinder, chiller, washing line...)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: Diverse, Complete can filling line Very good condition! We have used the system for slightly moist and sticky pipe tobacco. Therefore, it is suitable for all free-flowing products, such as spices, nuts, seeds, gummy bears, and many other types of food. All components of the system have been finely tuned by an experienced team and operated as a complete line. If you want to fill free-flowing products into cans, or even first into bags and then into cans (both are possible), then this is the perfect system for you. The line can fill both into tubular bag packaging as well as directly into cans. The entire line has a capacity of 30 cans per minute. Some components of the system, such as the capper and labelling machine, have an even higher capacity. Configured for 400 ml cans—both Obeck and Polipack brands ran flawlessly. Other can formats are possible; the system can be adapted accordingly (additional costs apply). The system consists of: - 14-head multihead weigher with platform (work platform): 1.9 m x 1.9 m x 1.8 m, including ladder and safety railing, and automatic product feed by Hangzhou Zon Packaging (do not be deterred—the supply of spare parts is excellent and the machine runs extremely reliably!) - Tubular bag (form fill and seal) machine with Siemens control by Hangzhou Zon Packaging Hsdpfx Aex Arbvoh Nong - Can filling module from Wellman Anlagentechnik GmbH - Can unscrambler from Tölke with automatic can feed (cans can be loaded by the carton) - Capper from Bosch with automatic lid feeding (lids can be loaded by the carton) - Labelling machine for lid and side labels from Herma Alternatively, a screw conveyor for product feeding can also be offered, allowing the product to be taken directly from Eurobins and automatically filled. Components of the line can also be purchased separately.

Year of construction: 2007, condition: excellent (used), 1 x Record Packaging Machinery flow wrapper with Domino V230i thermal transfer overprinter and infeed conveyor. Fitted with an adjustable folding box, this unit is suitable for wrapping a variety of products in printed or clear film. Model - Scorpion MD SP. Date of manufacture - 2007. Speed - between 20 to 120 packs/minute (depending on product size). Sealing jaws - 350mm long. Infeed conveyor - 185mm wide. Outfeed conveyor - 220mm wide. Previous use - for packing cereal bars and biscuits. Hnsdpfx Asukw Nbeh Njg Overall dimensions - 4670mm L x 1350mm W.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Our state-of-the-art VFFS packaging machine is a true all-rounder, specifically designed to optimally support companies that demand the highest quality standards. With exceptional build quality and a wide range of applications, our machine features intuitive operation that streamlines your packaging processes. The highly powerful motors and user-friendly color touchscreen control system provide maximum flexibility during format changes and significantly simplify your packaging operations. The machine is equipped with memory slots for storing machine parameter settings. For this packaging line, we also offer fully and semi-automatic infeed systems, including weighing solutions, which can be retrofitted according to your requirements. If you want to optimize your packaging processes with robust productivity and high quality, Impuls Packaging is your ideal partner. Machine features: 1. Single film unwind 2. Individually servo-driven sealing jaw 3. Three servo drive controllers 4. HMI control panel 5. Two independent temperature controllers 6. Housing made of stainless steel 304 7. Documentation in the local language 8. Registration mark control 9. Programmable bag length 10. Vertical product flow Hnjdpfx Ajwlgnrjh Nog 11. One format set is included in the price. Technical parameters: 1. Product length: L50-290mm 2. Product width: W80-200mm 3. Packaging speed: up to 45 products/min (depending on product, bag length, and material) 4. Maximum film width: 420mm 5. Power supply: 1Ph. 220V 50Hz 6. Total power: approx. 3.9 kW 7. Machine weight: approx. 300 kg 8. Machine dimensions: approx. 1300x1170x1585mm Bag types: 1. Classic flow pack bag 2. Stand-up pouch (classic flow pack bag with side gusset – available as an optional extra)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: DR047-13 / 10015861, Complete resin dryer system for injection moulding production. The system has been used sparingly and is in good condition. The system consists of multiple components that can also be sold separately, as follows: 1 resin dryer Moretto VTH 31 V, SN 1906041 / 2019 2 resin dryers Plastic Systems, SN DR047-13 / 10015861 / 2013, capacity 370 kg each Dwjbk Rkjwx E Nbjm Eceb 23 resin silos with the following capacities: - 54 kg * 4 pcs - 105 kg * 6 pcs - 113 kg * 2 pcs Hsdpfx Aewx E Nbeh Neng - 75 kg * 2 pcs - 56 kg * 4 pcs - 22 kg * 2 pcs - 140 kg * 1 pc - 210 kg * 1 pc - 420 kg * 1 pc Distribution pipelines. Stainless steel pipes and fittings available. Do not hesitate to contact us for a personalised price quote.

Condition: used, Year of construction: 1993, Fabricant : PRB / Marchesini Group Model : Pocket 3 Year : 1993 Type : Case packer Application: packing cases into boxes Manufacturer data: Case features: side a: min. 200 - max. 550 mm side b: min. 120 - max. 330 mm side c: min. 130 - max. 350 mm Case features: L dimension: min. 20 - max. 550 mm l dimension: min. 10 - max. 130 mm height: min. 75 - max. 200 mm Tape characteristics: External diameter max: 220 mm Chuck diameter: 77mm Band width: 30 - 60 mm Hnjdex R Dapspfx Ah Nog Weight : 1350 kg

Condition: used, Year of construction: 2003, functionality: fully functional, rotor length: 990 mm, rotor width: 650 mm, power: 110 kW (149.56 HP), For sale P.R.T. (Italian) Water Grinder used for shredding polyethylene film. Hnjdpfxsx Rp S Rs Ah Nog 5x2 rotating knife 2x2 stationary knife. In good condition. With 110 Kw electric motor. Throughput 400-600 kg/h Rotor dimension W 650 x L 990 mm Please check our other machines (extruder, chiller, shredder...)

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: V1 01HOHS300KET5ESGR0SZ580, warranty duration: 12 months, The machine is usually always in stock. Short delivery times are possible. System Features 1. 2.5-meter-long chain conveyor (other lengths available upon request) 2. Adjustable bag former 3. Double film loader + automatic film centering device 4. Rotary end seal, single sealing jaw 5. Solid center fin seal structure 6. Four servo-controlled drives - Active material feed shaft - Center seal - End seal - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in local language 11. Print mark control 12. Programmable bag length 13. Standard travel direction: left to right Technical Parameters 1. Product length: L40 - 300 mm 2. Product width: W30 - 160 mm 3. Product height: H5 - 60 mm 4. Packaging speed: up to 300 products/min (depending on product, bag length, material, and number of sealing jaws) Hnodpfoq Ikgkex Ah Nog 5. Maximum film width: 500 mm 6. Supply voltage: 1-phase 220V 50Hz 7. Total power: approx. 7.5 kW 8. Machine weight: approx. 450 kg 9. Machine dimensions: approx. 4250 x 990 x 1650 mm