Used other plastic processing machinery for sale (74)

Condition: used, functionality: fully functional, operating hours: 15,000 h, machine/vehicle number: Model 0408, pressing force: 150 t, this is a mould clamp for Polyurethane RRIM moulding, top and bottomPlatens tilt 35 degrees each, Platens open gap for mould is 2040mm, Platens closed gap is 650mm Rsdpfxjwgkr Ds Ahvep Platen size is

Year of construction: 2000, condition: excellent (used), machine/vehicle number: 12086, COVER LABELING SYSTEM SCHLEUTER GU 2 DU WITH CIRCULAR STATION FOR PLACING SPOONS RNA SRC-N-630-1R Performance: 60 lids per minute Consists of: - Stacker Redpfxjn Awh Ue Ahvep - Circular station for placing spoons - Labeling unit - Stapler

Year of construction: 2016, condition: excellent (used), machine/vehicle number: 216 105, BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Equipment / Additional information: Roots Blower Redehqmghopfx Ahvep Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL

Year of construction: 2000, condition: excellent (used), machine/vehicle number: 12088 10, Performance: 125 cups per min. (gross) Consists of: -Destacker -Bottom label dispenser -Side label dispenser 1 + 2 and 3 + 4 Rsdpsn D Hczsfx Ahvep -Station for finishing the gluing of the side labels (ironing system) -Control station with camera surveillance -Stacker with counter -Outfeed conveyor for finished product The machine can also label round cups (160-180°, around). Cup height: 120-130 mm

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 3.65-00001, WITH COUNTING STATION Wiring Diagram No.: 8.62-00001 Equipment / Additional information: Consists of: -Infeed conveyor -Machine -Counting station -Discharge belt Rsdpfxepr Ut Nj Ahvep

Year of construction: 2000, condition: excellent (used), machine/vehicle number: 12087, COVER LABELING SYSTEM SCHLEUTER GU 2 DO WITH 2xSTATIONS FOR PLACING SPOONS Redpfsn Awndjx Ahvop Performance: 90 lids per minute (spoon inserted diagonally) Consists of: - Stacker - 2xStations for placing spoons - Labeling unit - Delivery station

Condition: excellent (used), COVER LABELING SYSTEM (Zweckform with Schleuter label dispenser) Age : ca. 1990 Performance: 100 cups/lids per minute Equipment / Additional information: Consists of: - Stacker Rsdpfx Ajn D E Hpehvsp - Labeling unit - Stapler

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, Mould carrier for polyurethane processing, swivelling universal mould carrier, condition good to very good, including control system and hydraulic unit, clamping area approx. 1250 x 1400 mm, parallel stroke 200 mm, with additional intermediate plate, not part of the offer, opening width 897 mm, swivel angle 40°, dimensions (H x W x D) 2410 x 1863 x 3310 mm, safeguarded by light barriers, inspection possible by appointment, drawings and further technical data available on request. Redpfsxqmnaex Ahvep

Condition: used, Year of construction: 2016, functionality: fully functional, AUTOMATIC BAG EMPTYING MACHINE Manufacturer Comav Fully automatic bulk bag emptying Production up to 10 pallets per hour, for a total of 13.500 kg Buffer warehouse with capacity of 4 pallets Power consumption 35 kW Dimensions 15 x 3 m Height 6 m Rodjynh Ttspfx Ahvep Year 2016

Condition: like new (used), Two cabinets with 12 drawers: ejectors – round and flat. Price per item only €10. Rodpfx Asxz Rx Dshvsp

Condition: good (used), Year of construction: 2027, We are selling a Thermolift 100-2. Further information can be provided upon request. Redpfxoyl Uabs Ahvop

Condition: excellent (used), This conveyor belt machine is ideal for shearing the edges of small carpet samples. Rsdpfeud Dqkex Ahvop Diagram of K-50 The key component of the KS 50 edge beveling machine is our SE 50 cutting unit. The machine is designed with angle adjustment from 0° to 60°. The depth of cut is adjustable from 2 mm to 22 mm. The guide plate for carpet samples can be easily adjusted steplessly from 20 mm to 210 mm. Quick and easy adjustments can be made by releasing the locking lever. The conveyor belt is driven by a three-phase motor. The speed of the cutting motor and the conveyor belt is infinitely adjustable by means of frequency converters. Larger pieces of carpets are guided manually as they pass through. The cutting width is 50 mm.

Year of construction: 2013, condition: good (used), functionality: fully functional, machine/vehicle number: 06280213SEE, Equipment: CE marking, type plate available, From 1 June 2026, the rotation molding machine Polivinil SRM4500 will be available. The machine was manufactured in 2023. Equipped with 2 U-arms, each with a capacity of 2700 kg. For more information, please contact us. Rodpfjyan Dcex Ahvjp

Condition: used, Automatic machine for producing plastic bags for T-shirts or shopping bags Manufacturer: COSMO Model: ST-99 Bag size: - length: 350 - 650 mm - width: 160 - 365 mm - thickness: 0.008 - 0.05 mm Throughput: 180 - 300 pcs/min Installed power: 12 kW Rjdpfxorww E Io Ahvop Power supply: 230 V, 3 phases, 50/60 Hz Dimensions: 7150 x 1600 x 1750 mm Additional air compressor required: 10 hp - not included Technical condition: used machine

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 1425, table length: 3,300 mm, Urban sash stop station with fittings rack Screw feed unit S 330 Rodpfoyk Rv Aex Ahvop Milling unit FE 330 for milling out the lock case Hardware punching unit BS 330 with stop system for central and consistent handle position Olive drilling unit GOB 330 with hydropneumatic feed including accessories for spindle size adjustment

Condition: excellent (used), MATERIAL TRANSPORT & DOSING SYSTEM - COLORTRONIC WITH 3 COMPONENTS COMPLETE WITH CONTROLLER Rodjyh Htcopfx Ahvjp

Condition: excellent (used), MATERIAL TRANSPORT & DOSING SYSTEM - AZO (4x distributors) Rsdjyh E Raepfx Ahvep

Condition: excellent (used), Year of construction: 2004, Available: Immediately Redpeyhpwyjfx Ahvep

Year of construction: 2011, operating hours: 39,521 h, condition: excellent (used), Rated power: 110.0 kW Rodpfx Ajyhpqtehvep Motor speed: 1485 rpm Max. operating pressure: 8.5 bar Ambient temperature: 3°C/45°C

Condition: excellent (used), Year of construction: 2011, operating hours: 70,792 h, Rated power: 160.0 kW Rodpfx Asyhpppehvep Motor speed: 1500 rpm Max. operating pressure: 8.5 bar Ambient temperature: 3°C/45°C

Year of construction: 2005, condition: excellent (used), (Can process mono-cup and duo-cup) Equipment / Additional information: Machine consists of: -Stacker (Blink) -Sleeve dispenser with 2x sleeve dispenser (Clever) -Steam tunnel, shrink tunnel (Clever) -Packaging unit (Schleuter) Along with this machine, we can also offer you Redpfx Ajyhphljhvop STEAM SYSTEM JUMAG DG 260 (Ref. No. 95005.26)

Condition: used, Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut Rodpfxefhgvwe Ahvop For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: used, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Rjdpfxowgc I Ro Ahvjp Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Year of construction: 2001, condition: used, functionality: fully functional, machine/vehicle number: 5 06 10 / 157, Shoot saw with contour milling unit Weight: 105 kg Saw blade speed: 2750 rpm Compressed air: 6 ... 8 bar/hPa Pneumatic clamping: via foot switch L/W/H: 1000 mm x 2200 mm x 900 mm Rsdpfx Ahjyi Dl Usvop Voltage: 400 V/50Hz

Condition: used, Year of construction: 1998, functionality: limited functionality, machine/vehicle number: 98 20 262, Technical data at a glance GEISS, Seßlach Type 2800 x 1400 Year of manufacture 1998 Control Siemens Sinumerik 840. Working area approx. 2,800 x 1,400 mm Axes: 5-axis machining (B and C axis in milling head) Power 43 kW Weight approx. 5,900 kg Power supply 400 V / 66 A / 50Hz Formerly a tandem version. Tandem version has been professionally deactivated. Fully functional. Machine can be inspected at any time. Dismantling and loading at buyer's own risk. Redpfx Asyim Szshvsp