working pressure: 6 bar
workpiece height max.: ohne Tisch: 350 mm
workpiece height max.: mit Tisch: ca.150 mm
foil width: ca.800 mm
Ewbgcox
cycle time: 32 sec
control: Siemens S5
voltage: 220 AC V / Hz
total power requirement: 119 kVA
weight of the machine ca.: ca. 9,5 t
space requirements of the machine approx.: L:11,0xB:6,0xH:4,8 m
THERMO FORMING MACHINE for vacuum forming and laminating of interior panelling in vehicle construction with films and textiles.
Additionally to this Machine a Lamin...
Automatic thermoforming machine for styrofoam cups - thin wall - EPS Machinery b.v. - THERMOWARE type THW 3510 with a form of max. 10 forms - cups with a diameter of up to 95mm. Other forms may be applied to other products:
- automatic system for loading the basket with dry polystyrene
- mold filling system - pressure
- PLC control cabinet with a digital front panel
- mold mounting with toggel lever
- electric discharge eye
- electronic speed controller and vacuum control switch
Technical chara...
motor power 7 kW, heating power 20,35 kW, foil unwinding device, infrared heating (top and bottom), forming station, residual foil rewinding, stacking unit, manual unloading, separate control cabinet with Indramat control system
C3n0i3we
Make Illig
Model RV 53b
Year 2000
Approx Hours 64,880
Cicfubmhtx
Delivery Date Immediately
Stations Forming / Cutting / Stacking
Max Forming Area 500 x 350 mm
Min Forming Area 300 x 100 mm
Depth of Draw 100 / 40 mm
Max Mould Closing Force 55 kN
Forming Pressure 2 bar
Max Cycles/Min 22
Total Width incl Control Cabinet 2320 mm
Total Length incl Roll Stand 7420 mm
Total Height 2230 mm
Total Weight 7,500 kg
All details are subject to change and/or errors.
All equipment is subject to availability an...
Complete Production line with Fiber preperation for 4 Machines PREPER KFP 250 and one Natureformer KFT 90 Speed
TECHNICAL DATA
Pulp preparation capacity: 250kg/h or app. 9 Ιη3/h of 1 % Pulp
Pulper density: approx. 13%
Iuypgw3dm
Pulping process: batch wise pulping each 60mίn
Main units: Pulper; Dump chest; machine chest; Pumps; Control
Footprint pulp preparation - basic module: approx. 5,5m χ 5,5m
Footprint pulp preparation incl. all options: approx. 5,5 χ 11 m
installed power incl. all options...
- Vacuum thermoforming and punching machine ILLIG SB 74e9
- Machine is fully operational, properly maintained, in working process untill the end of November under power, already disconnected, stored preper for loading with forklift
- available for sale
- Year of made 2007
Cfi22ambot
- thermoforming and punching, e.g. bowls
- Dimensions of the machine 4500 x 1900 x 2800 mm
- Weight of machine 2,0 t
- Total input power 16 kW
- The maximum size of the working area 505 x 775 mm
- Maximum dimension ...
Thermoforming line
Brand - G.N. Plastics Company Limited CANADA
Cie7rvzcoy
Model GN1914DM
Construction year - 2007.
For more technical details please LAST PHOTO !!
To be imported from Sweden, an automatic machine for packing pallets with thermo-shrinkable foil, worked only in one factory and for a very short time.
Machine for plastics Actipac BL 700/75 with side weld KL 700/200.
Everything is on 5 Euro pallets, is already packed and just waiting for transport
Chypnf9d80
Make Illig
Model RDKP 72G
Im7ast8xu
Year 2000
Stations Forming, Cutting and Stacking
Delivery Date Immediately
Maximum Forming Area 760 x 545 mm
Minimum Forming Area 300 x 100 mm
Height of Forming Above-Below Material 120 / 120 mm
Max Mould Closing Force 200 kN
Max Punching Force 600 kN
Maximum Cycles-Minute 55
Voltage 420 V
Hertz 50 Hz
Approx Total Width 2510 mm
Approx Total Height 2500 mm
Approx Total Weight 11,000 kg
All details are subject to change and/or errors. All equipment is subject ...
Excellent condition, immediately available, ex-works Production place)
- Moveable top and bottom table on forming and cutting station by servo drives
- Servo drive on Stacking unit as well for chain transport
- Siemens S7 Control
F0yop82du
- 2 bar Pressure Forming
Max. Film width 760 mm
Max. forming area 704 x 514 mm
Min. forming area 400 x 250 mm
Pos/Neg. Depth of Draw 120/40 mm
- Vacuum forming machine Koplast VL 1000 for sale
- Thermoforming
Cfi2239skw
- Made in KOPLAST Czech republic
- Machine is fully operational, properly maintained, available at December 2022
- Dimensions of the machine 3440 x 1890 x 3025 mm
- Weight of machine 1,7 t
- Total input power 60 kW
- The maximum size of the working area 920 x 920 mm (possibility of reducing material size)
- Maximum dimension of plastic material 1000 x 1000 mm
- Documentation in Czech language: User manual, Technical rep...
The machine is used in solid surace industry Corian, Krion, thermoplastic industry, thermoplastic industry and automotive industry, as well as for thermoforming of composite materials.
- work area 3100 x 1300mm
- transparent silicone membrane 3700 x 1300 x 2mm with thermal resistance up to a minimum of 200 ºC
- hard and durable 15mm plate with many holes for quick ventilation
Cazi9i7zmz
- membrane flexibility 500%
- pressure pump 25 m3
- silicone membrane for thermoforming high elements up to 10...
motor power 11 kW, heating power 47 kW, foil unwinding device, alignment unit, infrared heating (top and bottom), forming station, stacking unit, residual foil rewinding, manual unloading, outfeed conveyor with lighting assembly, separate control cabinet with cooling unit Rittal, control Indramat
Ci2gf0l078
Manufacturer TFT
Model FC 780E
Year 2005
Condition Used
Stations Forming Cutting and Stacking
Max Tool Size 780 x 570 mm
Hours approx TBC
Depth of draw 130 / 130 mm
Cheps9u2l8
Max material width 810 mm
Max Sheet Thickness 1.8 mm
Max mould closing force 20,000 daN
Maximum cycles-minute 45
Forming pressure 7 bar
All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.
Forming area for forming operation max. 560 x 410 mm
Material width max./min 610/200 mm
Index length max./min. 425/150 mm
Depth of draw positive max. 120 mm
Depth of draw negative max. 120 mm
3xkuix3
Mold closing force max. 500 kN
Forming pressure 6 bar
Number of cycles max. 35 min
The machine comes with ILLIG Pre-heating unit VHW 60/1 as well WEb-Grinder ILLIG RS 75b. Besides has a conveyor after the stacking unit as well an ele...
Manufacturer Kiefel
Model KMV 75D
Year 2003
Maximum forming area 750 x 540 mm
Minimum forming area 400 x 250 mm
Max Tool Size 766 x 556 mm
Depth of draw 150/50 mm
Cgjkmpkk9m
Suitable materials PS, OPS, EPS, PP, PE, PVC, APET, CPET, RPET
Max sheet width 810 mm
Pressure forming upto max 2.5 bar
Max cycles / min 30
Approx length 12800 mm
Approx width 2600 mm
Approx height 2700 mm
Approx weight 11,000 kg
The machine is used like new for bending solid surface elements, laminates and veneers
Also The machine is used in thermoplastic industry, thermoplastic industry and automotive industry, as well as for thermoforming of composite materials.
efficient, in very good technical condition
- working area 3700 x 1300mm
- transparent silicone membrane 3700 x 1300 x 2mm with thermal resistance up to a minimum of 200 ºC
- hard and durable 15mm plate with many holes for quick ventilation
- membrane flexibil...
Machines direct from the manufacturer!
The ORIGINAL made in AUSTRIA!
ULTRAFORMER
The Multi-Tasking Thermopress-Unit!
>A TRULY UNIVERSAL MACHINE with endless production opportunities.
>Infinite possibilities in WOOD, PLASTICS and SPECIAL COMPONENTS MANUFACTURING.
>REALISATION of challenging and demanding projects.
ULTRAFORMER 6 in ONE production capabilities:
● THERMOFORMING of plastics with a thickness of up to 6mm!
All thermoformable Plastics such as ABS, PMMA extruded and cast PVC, PC, PET-G...
motor power 5,7 kW, heating power 9,9 kW, foil unwinding unit, aligning unit, infrared heating (top and bottom), forming station, stacking unit, residual foil rewinding unit, manual unloading unit, outfeed conveyor with lighting set-up, separate control cabinet with cooling unit Rittal, control Indramat, note: overhaul of the machine in 2009
Ci2gderijv
Mobile plasticiser for press processing of thermoplastics
Manufacturer: KMH
Type: 60 S
Hydraulics PN: 150 bar
Pn: 16,5 kW
P heating: 8 kW
400 V
Single STW 150/1-3-10-K
Temperature control unit
3.9 kVA
Heating capacity 3 kW
380 V
Bxmjwrabxt
Hydraulic pump
Complete factory closure,
large selection of storage platforms, pallet racks, shelf racks, paternosters.
High-quality industrial machines, lathes, grinding machines, hand machines.
Further articles - new and used - you will find in our s...
Top and Bottom Heater
Central Pump
Plug Assist
Stacking table
with Pre-Heater & Web-Grinder
Forming area (mm) 680x280
Film width (mm) 730
Depth 125
Q9vez
General overhauled plant
Universal thermoforming line with adjustable window plates
- Additional electric heating for tools
Cgbpsdxmfy
Format plate min. 990 x 650
Format plate max. 1500 x 1500
Format window plate min. 940 x 600
Format window plate max. 1479 x 1428
Drawing depth: 780
Aluminium platen oven for pre-heating Solid Surface, plastics and composite materials
The Global Professional thermoforming oven has been developed with the latest pre-heating technology for a tension-free, flawless heating process of acrylic Solid Surfaces and plastic materials.
The technology consists of direct contact heat with an electrical aluminium heating platen that guarantees a gentle, even heat distribution throughout the entire thickness and surface of the material. The material is p...
Make Illig
Model RDK 80
Year 1998
Approx Hours 40,200
Condition Good
Delivery date November 2022
Stations Three - In Mould Cutting / Cutting / Stacking
Max forming area 760 x 575 mm
Max form/punch area 740 x 555 mm
Depth of draw 120 / 120 mm
Max material width 805 mm
Max mould closing force 60,000 daN
Max cycles-minute 35
Forming pressure 6 bar
Approx total length 8890 mm
Approx total width 2865 mm
Approx total height 2974 mm
Approx total weight 11,800 kg
All details are subject to change and...
motor power 3,18 kW, heating power 10 kW, foil unwinding device, alignment unit, infrared heating (top and bottom), forming station, stacking unit, residual foil rewinding, manual unloading, outfeed conveyor with lighting assembly, separate control cabinet with cooling unit Rittal, control Indramat
C3leokb2
The machine is designed for vacuum forming of various elements of thermoplastic plates such as: PP, PET, PS, HIPS, EPS, PLA, PVC, PMMA, KYDEX.
Technical dat
Working area dimension: 800×600 mm
The dimension of the plate sheet: 860×660 mm
Working table stroke: 290mm
Thermoformed board thickness: 0,2 to 5 mm
Power supply for the electric installation: 400V
Heating power: Upper-12 kW, lower–2,4 kW
Vacuum pump performance: 40 m3 oil
Pressure in the chamber: ok.0,95-0,98 kg/cm2
Dimensions: width...
Forming table was replaced by Gabler in 2008 and since then has not run more than 3,000 hours.
Upkuk9l7
Film width max./min. 814/410 mm
Forming area max. 750 x 436 mm
Drawing depth pos. 150 mm
Number of cycles / min. 40
Forming Area:: 560x500mm
Bk3pdqdiqc
Film Width: 560mm
foil thickness: min 0,2mm - max.0.9mm
Depth of draw pos/neg: 140mm
Materials: PET, PVC, PP, PS, HIPS
Condition - in use, in production
Location: Bucharest, Romania, 050192
Other details:
- forming - cutting
- the documentation in original + scan pdf.
- we have the software saved
- working pressure: 6 bar
- voltage: 3x400V + N + PE, 50Hz
- cycle time: min 5, max 18/minut
- weight of the machine ca.: . 1,2 t
- space requirements of the ma...
Make: Illig
Model: RD 53
Year: 2004
Approx Hours: 82,000
Material: PP (with preheater), HIPS, PS, PVC, PET
Stations: Forming, Cutting and Stacking
Max Forming Area: 500 x 350 mm
Min Forming Area: 300 x 160 mm
Film width: 540 mm
Height of Forming Above-Below Material Level: 100 / 40 mm
Max Mould Closing Force: 55 kN
Yverks
Forming Pressure: 2 bar
Cycles/Min: 40
Total motor power: 32 kW
Total heating power: 44,9 kW
Rated current: 115 A
Dimensions (L x W x H): 8,3 x 2,3 x 2,5 m
Power 7.08 kW, heating power 20.35 kW, consisting of foil unwinding device, alignment unit, infrared heating (top and bottom), forming station, residual foil rewinding, stacking, manual unloading, control cabinet with control/operating unit
D0crvy
Thermoforming machine with tilting table and
I3h2jiz
Material width max./min. 730/410 mm
Forming area max. 700 x 345 mm
Depth of draw pos. 150 mm
no. of cycles / min. 40
In-line ILLIG VHW PRe-Heater and ILLIG RS 75b Web-Grinder
Still in production
Make Kiefel
Model KMV 75D
Year 2003
Condition Good
Approx hours 52,900
Delivery date Immediately
Maximum forming area 750 x 540 mm
Minimum forming area 400 x 250 mm
Max tool dimensions 766 x 556 mm
Depth of draw 150/50 mm
Suitable materials PS, OPS, EPS, PP, PE, PVC, APET, CPET, RPET
Max sheet width 810 mm
Pressure forming upto max 2.5 bar
Max cycles / min 30
Approx length 12800 mm
Approx width 2600 mm
Approx height 2700 mm
Approx weight 11,000 kg
All details are subject to change and/or errors...
motor power 3,36 kW, heating power 9,9 kW, foil unwinding unit, aligning unit, infrared heating (top and bottom), forming station, stacking unit, residual foil rewinding, manual unloading, note: overhaul of the machine in 2003
C3iotxns
Max forming area: 750x540 mm
Formed parts height positive: 150 mm
Formed parts height negative: 50 mm
Film width max: 800 mm
Operating hours: 50.000 h, still in production
Cf7ew3ngp2
Material: BOPS, PP, HIPS, PS, PVC, PET, ABS
Forming station force: 10 tons
Punching station force: 70 tons
Material thickness (min): 0,2 mm
Material thickness (max): 1,2 mm
Heating power: 51,75 kW
Total connected power max: 104 kVA
Operating voltage: 3x400V+N+PE/50Hz
Operating pressure: 6 bar
Compressed air consu...
Make Kiefel
Model KMV 50D
Year 2004
Condition Excellent
Approx hours 16,300
Delivery date Immediately
Maximum forming area 500 x 350 mm
Minimum forming area 300 x 100 mm
Max tool dimensions 516 x 366 mm
Depth of draw 120/40 mm
Suitable materials PS, OPS, EPS, PP, PE, PVC, APET, CPET, RPET
Max sheet width 545 mm
Pressure forming upto max 2.5 bar
Max cycles / min 35
Approx length 10300 mm
Approx width 2100 mm
Approx height 2200 mm
Approx weight 6,700 kg
By330ordjx
All details are subject to chang...
motor power 3,18 kW, heating power 9,9 kW, foil unwinding unit, aligning unit, infrared heating (top and bottom), forming station, stacking unit, residual foil rewinding, manual unloading, note: overhaul of the machine in 2005
C3e3ft7g
Vacuum Form machine for the production of plastic Blister packaging PS, PVC, PET etc.
Un-winder
Top heating plate
Skeletal waste windier
With stacking device
Forming area (mm) 500 x 350
Film width (mm) 540
Cf7etj9c9p
Depth. (mm) 100
Manufacturer Kiefel
Model KMD 52 BL
Year 2004
B8ugjzqq9a
Condition Used
Approx hours 84,800
Delivery date Immediately
Stations Three
Max tool dimensions 540 x 420 mm
Maximum forming area 520 x 400 mm
Minimum forming area 260 x 250 mm
Depth of draw 120 mm +/-
Max film width 600 mm
Max dry cycles / min 60
Operating pressure 6 bar
Approx Dimensions 9700 x 2200 x 2600 mm (L x W x H)
Approx Weight 10,000 kg
All details are subject to change and/or errors. All equipment is subject to availability and...
motor power 5,7 kW, heating power 9,9 kW, foil unwinding unit, aligning unit, infrared heating (top and bottom), forming station, stacking unit, residual foil rewinding unit, manual unloading unit, outfeed conveyor with lighting set-up, separate control cabinet with cooling unit Rittal, control Indramat, note: overhaul of the machine in 2010
Ci2f33isfa
motor power 3,18 kW, heating power 9,9 kW, foil unwinding unit, aligning unit, infrared heating (top and bottom), forming station, stacking unit, residual foil rewinding, manual unloading, note: overhaul of the machine in 2005
Rftzd
motor power 3,18 kW, heating power 9,9 kW, foil unwinding unit, aligning unit, infrared heating (top and bottom), forming station, stacking unit, rest foil rewinding, manual unloading, note: overhaul of the machine in 2010
Ci2f0gn9qx
motor power 3,36 kW, heating power 9,9 kW, foil unwinding unit, aligning unit, infrared heating (top and bottom), forming station, stacking unit, residual foil rewinding, manual unloading, note: overhaul of the machine in 2003
Yvu2m0
motor power 3,36 kW, heating power 9,9 kW, foil unwinding unit, aligning unit, infrared heating (top and bottom), forming station, stacking unit, residual foil rewinding, manual unloading, note: overhaul of the machine in 2004
C3cglbi7
Heating capacity 64.35 kW, consisting of film unwinding device, alignment unit, infrared heating (top and bottom), forming station, cup stacking, residual film rewinding, discharge conveyor elevated, with manual removal, separate control cabinet, control IBT
Ieng3yr
motor power 3,18 kW, heating power 9,9 kW, foil unwinding unit, aligning unit, infrared heating (top and bottom), forming station, stacking unit, residual foil rewinding, manual unloading, note: machine overhaul in 2006
C29qqouu
Power 8.6 kW, heating power 51.2 kW, consisting of foil unwinding unit, alignment unit, infrared heating (top and bottom), forming station, outfeed conveyor with residual foil take-up, stacking unit, manual removal, separate control cabinet CM420, separate tempering unit for top and bottom mold
Ci2fxqtm3o
We make the search easier for you
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Sample sales contract for used machines in nine languages
Machineseeker still biggest sponsors of 2nd German football league
Photo gallery: the 10 strongest forklift trucks in the world
How to receive 100% of our e-mails
Photo gallery: The World's 10 biggest excavators
Olympic Games: Machineseeker sponsors Team Germany
Machineseeker Trust Seal
What is the Trust Seal?
The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.