Year of construction: 2002, condition: used, functionality: fully functional, The Getecha grinding mill, model GRS 180 with water cooling, is for sale. Power: 2.2 kW Blades: 3 pieces Screen: 6 mm Njdpfx Adsy Ugiuolect

Condition: used, Year of construction: 2003, functionality: fully functional, The auxiliary mill from ZERMA, model GSL 180/300 Power: 4 kW Ncsdpfoy Ughqex Adlot Hopper opening: 290 mm x 270 mm Knives: 10 pieces on the holder, for a total of 30 Screen: 6 mm

Condition: excellent (used), Year of construction: 1997, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: M9707, type of input current: three-phase, total width: 4,450 mm, total length: 1,950 mm, total height: 1,800 mm, heating capacity: 17.5 kW (23.79 HP), FECKEN KIRFEL K11 Horizontal Band Knife Splitting Machine (Germany, 1997) This is a high-quality German machine, ideal for manufacturers seeking proven industrial equipment from a reliable source. Suitable for: EVA foam sheets Njdpfx Aey E Ihtodloct Rubber sheets Technical foam materials Footwear and industrial applications Machine Highlights: Manufacturer: Fecken-Kirfel Model: K11 Year: 1997 Type: Horizontal Band Knife Splitting Machine Working Width: up to 1200 mm Condition: Excellent working condition Status: Installed, powered and in operation All maintenance has been carried out with original genuine spare parts from Fecken Kirfel only. The total weight of the machine is 3450 kg.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: M8286, This listing is for a FECKEN KIRFEL K11 bandknife horizontal splitting machine, manufactured in Germany in 1988. The machine is designed for industrial use and is particularly suitable for splitting rubber and similar materials. It features a robust construction with dimensions of 1950 mm in length, 4450 mm in width, and 1800 mm in height, and weighs approximately 3450 kg. Njdpfxsyqtc Ss Adloct The K11 model has a working width of 1200 mm (56 inches), which allows it to accommodate a range of material sizes. It operates with a maximum power requirement of 17.5 kW and uses a 380 V operating voltage, with a control voltage of 220 V. The rated current is 22 A, and it is protected by a 35 A fuse. The machine includes a control panel located on the right side, equipped with multiple buttons and switches for operation control. A metal table surface is positioned in front of the machine to facilitate material handling during the splitting process. The equipment is painted green and is located in an industrial environment with rubber sheets nearby, indicating its application in rubber processing.

Condition: used, Year of construction: 2024, clamping force: 650 kN, displacement volume: 2,212 cm³, injection pressure: 2,090 bar, overall weight: 28,000 kg, screw conveyor diameter: 80 mm, terms of delivery: EXW (ex Works) delivery time: on request Nedoy Tbzvjpfx Adlsct terms of payment: 100% prior to delivery

Condition: ready for operation (used), Year of construction: 2011, operating hours: 42,519 h, clamping force: 5,000 kN, screw diameter: 100 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 500-4300 CX features a clamping force of 500 t and a screw diameter of Ø 100 mm. It has a maximum mould opening of 1530 mm and tie bar spacing of 900 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 500-4300 CX machine we have for sale. Contact us for further details. • PP injection capacity: 1.5 kg • Mould dimensions, min.: 480 mm • Tie bar spacing (H × V): 900 × 800 mm Ncjdpfx Aoy Tai Eedljt • Maximum mould opening: 1530 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 44,858 h, clamping force: 4,200 kN, screw diameter: 90 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 420-4300 CX features a clamping force of 420 t and a screw diameter of Ø 90 mm. It offers a maximum mould opening of 1400 mm and tie bar spacing of 800 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 420-4300 CX machine we have for sale. Contact us for further details regarding this machine. • Injection capacity (PP): 1.2 kg • Minimum mould dimensions: 380 mm Ncodpey S Tw Hsfx Adlot • Tie bar spacing: 800 x 800 mm • Maximum mould opening: 1400 mm • Working hours: 44,858 h

Condition: ready for operation (used), Year of construction: 2012, operating hours: 46,424 h, clamping force: 3,500 kN, screw diameter: 80 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2012. This Krauss Maffei 350-3000 CX features a clamping force of 350 t and a screw diameter of Ø 80 mm. It offers a PP injection capacity of 640 g and a maximum mould opening of 1260 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 350-3000 CX machine we have for sale. Contact us for further details. Ncjdpfx Aey S Tvvodlet • PP injection capacity: 640 g • Minimum mould dimensions: 380 mm • Tie bar spacing: 710 × 710 mm • Maximum mould opening: 1260 mm

Condition: ready for operation (used), Year of construction: 2012, operating hours: 49,627 h, clamping force: 3,000 kN, screw diameter: 70 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2012. This Krauss Maffei 300-2000 CX features a clamping force of 300 t and a screw diameter of Ø 70 mm. It has a maximum mould opening of 1000 mm and tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 300-2000 CX machine we have for sale. Contact us for further details. • PP injection capacity: 640 g • Mould dimensions (min.): 320 mm Ncjdpfxoy S Tq Hs Adlst • Tie bar spacing: 630 × 630 mm • Maximum mould opening: 1000 mm • Working hours: 49,627 h

Condition: ready for operation (used), Year of construction: 2011, operating hours: 49,533 h, clamping force: 3,000 kN, screw diameter: 70 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 300-2000 CX features a clamping force of 300 t and a screw diameter of Ø 70 mm. It has a maximum mould opening of 1000 mm and tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 300-2000 CX machine we have for sale. Contact us for further details. • PP injection capacity: 640 g • Minimum mould dimensions: 320 mm • Tie bar spacing: 630 x 630 mm • Maximum mould opening: 1000 mm • Working hours: 49,533 h Nedey S Tqajpfx Adlsct

Condition: excellent (used), Year of construction: 1999, Dryer material Lanco Year 1999 Type: LTR 100 Njdpfout T A Aox Adlect

Condition: ready for operation (used), Year of construction: 2018, clamping force: 1,900 kN, screw diameter: 45 mm, total width: 1,570 mm, total height: 2,180 mm, overall weight: 8,900 kg, product length (max.): 5,970 mm, This HAITIAN ZHAFIR ZERES ZE1900 was manufactured in 2018. It is an electrical injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this HAITIAN ZHAFIR ZERES ZE1900 electrical injection moulding machine. Contact us for more information. Additional equipment • Air valves: 2 Machine Benefits Technical Machine Benefits Ncedpfx Adjx D H Nqjlst • Screw Type: A / B / C • Screw Diameter: 40 mm (A) / 45 mm (B) / 50 mm (C) • Screw L/D Ratio: 22.5 (A) / 20 (B) / 18 (C) • Injection Distance: 201 mm • Calculated Injection Volume: 252 cm³ (A) / 319 cm³ (B) / 395 cm³ (C) • Injection Capacity (PS): 229 g (A) / 290 g (B) / 358 g (C) • Injection Speed: 160 (250)* mm/s • Injection Pressure: 253 Mpa / 2580 Kgf/cm² (A) | 200 Mpa / 2040 Kgf/cm² (B) | 162 Mpa / 1650 Kgf/cm² (C) • Holding Pressure: 202 Mpa / 2060 Kgf/cm² (A) | 160 Mpa / 1630 Kgf/cm² (B) | 130 Mpa / 1320 Kgf/cm² (C) • Screw Speed: 350 RPM • Nozzle Touch Force: 39.2 {4.0} KN{tf} • Nozzle In Size: 50 mm • Heating Input Power: 14.2 KW • Minimal Mould Size H*V: 370*335 mm • Ejector Stroke: 130 mm • Ejector Force: 44.1 {4.5} KN{tf} • Hopper Capacity: 25 L • Platen size: 840 x 790 mm • Distance between uprights: 570 x 520 mm • Installation height: 200 to 550 mm • Opening width: 470 mm • Max ejector stroke: 130 mm / max ejector bar length: 320 mm • Ejector coupling type: central haitian standard Ø 32mm / m16 • Centering ring: 160 mm / cascade control: 4-fold / core pulls bwap: 2 • Hot runner control units: external • Without handling Dimensions Machine Depth 5980 mm

Condition: used, Year of construction: 2005, Injection molding machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mold opening force: 220 kN Drive force of moving platen: opening: 105 kN closing: 95 kN Platen size (h x v): 1,060 x 1,095 mm Mold opening (h x v): 710 x 710 mm Mold opening stroke: 920 mm Minimum mold height: 380 mm Opening width: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Control zones for cylinder heating: 6 Dry cycle rate: 1,550 1/h Oil capacity: 720 liters Dimensions and weights: Net weight with control cabinet: approx. 16.0 tons L/W/H: 6,510 x 2,040 x 2,380 mm Maximum mold weight: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Displacement volume: 1,047 cm3 Shot weight for PS: 953 g Injection flow rate: 527 cm3/s Screw speed Standard / Option: 1/min. 285/349 Screw speed Standard or Stage 1: 95 PS Screw speed Option or Stage 2: 117 PS Nozzle clamping force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT color display and Floppy disk drive (3.5 inches) for data backup Plasticizing: 1 complete thermoplastic plasticizing unit in wear-resistant design, screw diameter 70 mm with backflow valve and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm Nsdpfx Adsxu Uvaslect 19526ä

Condition: new, functionality: fully functional, - Single screw extruder - 25/25 LD screw - Motor: 2.2 kW - Wide slot die adapted 1.0 x 120 mm - With cooling rollers (200 mm wide) Ncjdpfxsrg Ebcs Adljt - Winder / haul-off - Control system

Condition: excellent (used), functionality: fully functional, Key operating parameters and performance: Ncedey Ud T Rjpfx Adljt Drying temperature: from 30 °C to 160 °C (adjustable via a precise 3-point controller). Dew point: stable at approximately -60 °C, ensuring thorough drying of hygroscopic materials. Dry air flow rate: from 80 m³/h to 180 m³/h for devices in the compact series. Pre-drying time: reduced to only 3–4 hours for standard materials. Throughput: from 4 kg/h to 70 kg/h (values measured for Polyamide PA max).

Condition: good (used), Year of construction: 1995, Ref. no.: 18439 Manufacturer: MOTAN Type: LA8-200 Year of construction: 1995 Further information: MOTAN Central Drying & Vacuum Conveying System Complete MOTAN central drying and automatic material conveying system for plastic injection molding applications. The system includes: * 15 pcs stainless steel drying hoppers * Hopper capacity: 60 liters each The system was used in technical plastics production and is suitable for processing hygroscopic materials such as: PA, PC, PET, PBT, ABS, TPU and other engineering plastics. System Components 1. MOTAN ADC 200/10 Dry Air Generator * Year of manufacture: 1995 * Dry air capacity: approx. 200 m³/h * Heating power: approx. 19.5 kW * Central dry air generation system * Desiccant drying technology Function: Provides low-humidity hot air for the drying hoppers. 2. MOTAN LA net 200 Central Control System * Year of manufacture: 2006 * Central process and automation control unit * Touchscreen operator panel * Drying and conveying process management * Alarm and monitoring functions Function: Central control of all drying, conveying and material distribution processes. 3. Drying Hoppers * 15 pcs stainless steel drying hoppers * Hopper volume: 60 liters each * Central dry air connection * Automatic material loading * Suitable for technical plastics drying 4. Central Vacuum Conveying System * Elmo Rietschle central vacuum pump * Automatic granule conveying system * Central material distribution * Multi-machine supply capability Ncsdpey Udfyefx Adlst 5. Stainless Steel Piping & Filter System * Central conveying pipework * Filter units * Material loaders * Automatic distribution station Working Principle Plastic granules are automatically conveyed through the central vacuum system into the drying hoppers. The MOTAN ADC 200/10 dry air generator produces low-humidity hot air which continuously circulates through the material inside the hoppers. During this process, moisture is removed from the plastic granules to prepare the material for injection molding production. After drying, the material is automatically transported through the central conveying lines and distributed to the connected injection molding machines. All drying and conveying processes are centrally controlled via the MOTAN LA net 200 control system Condition The system was in production operation until dismantling. Further technical information, photos and videos available on request.

Year of construction: 2005, operating hours: 14,300 h, condition: ready for operation (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, controller manufacturer: AMADA, controller model: AMNC-F (FANUC 180i-PB), overall weight: 18,000 kg, total height: 2,318 mm, punching force: 20 t, product length (max.): 5,526 mm, sheet thickness (max.): 3 mm, table width: 5,120 mm, number of axes: 5, This 5-axis AMADA EM 2510NT turret punch press was manufactured in 2005. It features a punching force of 200 kN, a turret capacity of 45 stations, and a maximum sheet size of 1270 × 5000 mm. The machine has a rapid traverse speed of 100 m/min on the X-axis and 80 m/min on the Y-axis. If you are looking to get high-quality punching capabilities, consider the AMADA EM 2510NT machine we have for sale. Contact us for further details. • X-axis rapid traverse: 100 m/min • Y-axis rapid traverse: 80 m/min • Maximum sheet size: 1270 × 5000 mm • Maximum material thickness: 3.2 mm mild steel • Maximum sheet weight: 50 kg (feed speed F1) / 150 kg (feed speed F4) • Positioning accuracy: ±0.07 mm • Turret capacity: 45 stations • Turret rotation speed: 30 rpm • Punching force: 200 kN • Hits per minute – 1 mm pitch (5 mm stroke): 780 hits/min • Hits per minute – 25.4 mm pitch, X-axis: 500 hits/min • Hits per minute – 25.4 mm pitch, Y-axis: 330 hits/min • Maximum stroke length: 37 mm • Connected load: 27 kVA • Air consumption – machine: 250 l/min • Air consumption – Air Jet vacuum: 250 l/min • Operating air pressure: 5 bar • Tooling visible in the photos • 4 tool cabinets • Technical documentation (manual scan) • Machine + included tooling package shown in the photos • Machine fully operational: Yes (replacement of one pneumatic hose required to eliminate a minor air leak) • Machine connected to power: Yes Nedpfoy S A Tkex Adlect

Condition: excellent (used), Rexroth Voith triple pump for Krauss Maffei, SY2DFE1-20/071/071 Njdpfx Adsy S Amwjlect KM No. 6263540 KM No. 6441936 R90196471

Condition: excellent (used), Year of construction: 2008, operating hours: 80,313 h, clamping force: 1,600 kN, screw diameter: 40 mm, clearance between the columns: 520 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, injection weight: 184 g, mold height (min.): 250 mm, Arburg 520S-1600-400/170 two-component injection molding machine with sorting flap and gas boost (245) Year of production: 2008 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 40/30 Injection weight [g]: 184/77 Injection pressure [bar]: 2000/2000 Closing force [kN]: 1600 Column spacing [mm]: 520 x 520 Plate size [mm]: 688 x 688 Control type: Selogica Tongue: English, German Installed power [kW]: 106 Working hours [h]: 80.313 Robot socket: euros 67 Air valve: 4x Core string: 1x Control of heating for molds: Nodpfx Ajy Szrfjdloct 3x Feed hopper: NO

Condition: like new (used), High-Quality Meltblown Production Line for Nonwovens A complete machine inspection was carried out by the manufacturer's service team on 17.12.2025. Inspection report available. Commissioning at the customer's site can be offered upon request. Nodpfsx Hx Rnex Adloct Operating hours: 80 hours (commissioning only) Price for a new machine: EUR 7,500,000 • Manufacturer: Reifenhäuser GmbH & Co. KG Maschinenfabrik • Model: Reicofil MB 1600 • Year of manufacture: 2021 • Last commissioning: 2022 Technical specifications: • Working width: 1,600 mm • Material: Polypropylene (PP), MFI 230 / 2.16 > 400 g/10 min • Output: Up to 65 kg/h per meter width • Product weight: 10–80 g/m² • Production speed: 5–80 m/min • Die head: MB 1600, 50 h/in • Extruder: RT-1101-1-100, L/D 30 • Heating capacity, rotary beam: 65–172 kW • Winder: contact winder with preset reel change • Max. winding diameter: 1,250 mm • Web width: 1,700 mm • Winding tension: 10–100 N/m Additional equipment and accessories: • 3-component dosing system • 80 mm automatic seat changer • Ultrasonic cleaning system • Pyrolysis unit • Ozone extraction • Cutting knives • Central control panel with touchscreen and data entry

Condition: used, Year of construction: 2004, machine/vehicle number: SO136, Used combiblock KRONES contiform S8 + mrecafillTechnical Specifications & Performance DataThis Krones Contiform S8 combi blow molding unit is integrated with a Krones Mecafill filler and Krones capper, delivering reliable performance for modern beverage production. Built for PET bottle handling, it supports common still and sparkling water formats on a compact rotary platform. As part of a used bottling line or as a stand-alone combi station, it offers robust engineering and consistent output for industrial packaging operations.Manufacturer: KronesModel: Contiform S8 (combi with Mecafill filler and Krones capper)Year of manufacture: 2004Production speed: up to 12,800 bottles per hourContainer material: PETNeck type: AlaskaBottle formats: Compatible with 0.5L, 1.0L, 1.5L bottle formatsMaximum container height: 350 mmNo. of cavities (molds): 8Operating pressure: 40 barWork direction: ClockwiseLayout dimensions (approx.): Length 13022 mm, Width 10649 mmAdditional mechanics: 8 infeed/outfeed grippers; 220 mandrels on the preform handling pathAdvanced Automation & Control SystemsEngineered for dependable operation, this blow molding machine features an operator-friendly interface and modern control architecture to streamline setup, monitoring, and changeovers. Digital recipes help maintain repeatability across formats in second hand environments.HMI: KronesPLC: SiemensElectrical supply: 400 V, 3-phase, 50 HzAutomation: Rotary combi integration with synchronized blow, fill, and cap functions for stable throughputOperator protections: Safety guarding and interlocked access for maintenance zonesProduction Line Integration CapabilitiesThe Contiform S8 combi configuration enables seamless upstream preform handling and downstream filling and capping, minimizing footprint and transfer points. It integrates easily within a used bottling line, supporting conveyors, inspection, and downstream packaging machinery for beverage production.Operation modes: Integrated combi (blow–fill–cap) with rotary synchronizationFormat range: 0.5L to 1.5L PET bottlesApplication: Ideal for water bottling within industrial packaging and production line setupsMachine Condition & Maintenance HistoryThis machine has been overhauled and is guaranteed, prepared for immediate operation with compatible spare parts available. It combines the assurance of refurbished equipment with the value expected from second hand bottling equipment.Condition: Overhauled, guaranteed, ready for operationWarranty: 6 monthsOperational Performance & VersatilityDesigned for PET containers, this rotar... Ncedpfx Ajy Szb Tsdlet

Condition: good (used), Year of construction: 2022, Ref. no.: 18635 Manufacturer: SEPRO Type: 5 T25 Year of construction: 2022 Further information: SEPRO S5-25 med – 3-Axis Servo Linear Robot * Manufacturer: SEPRO Robotique S.A.S. (France) * Model: S5-25 med * Year of manufacture: 2022 * Serial number: R015336-02 * Condition: Very good and clean condition * Application: Injection moulding automation / part removal robot Technical Specifications Description Value Robot type 3-axis servo linear robot X-axis (Traverse) 2000 mm Y-axis 700 mm Vertical stroke 1200 mm Nodjy Ub Edjpfx Adlsct Rotation No rotation Payload class approx. 10 kg Control system SEPRO Visual 2 Voltage 3x400V – 3x480V Frequency 50/60 Hz Max. power 1.5 kVA Weight approx. 100 kg Series S5 med Description The SEPRO S5-25 med is a high-performance 3-axis servo linear robot designed for automated part removal and handling applications on injection moulding machines. The robot is in very good technical and visual condition and comes from a clean production environment. The “med” version is particularly suitable for medical and clean-room applications. The robot has only been used for testing and training purposes. The system offers: * fast and precise movements * reliable servo technology * compact and stable construction * modern SEPRO Visual control system * ideal integration into injection moulding automation systems Suitable for: * plastic injection moulding machines * medical production * clean-room applications * automated pick & place systems * high-speed handling applications

Condition: good (used), Year of construction: 2008, Ref. no.: 18622 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight: 103 g Injection pressure: 1600 bar Measurements and weight Ncedpfx Asy Ub D Tedljt Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Additional information & extras Core pull: 1 pcs Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: good (used), Year of construction: 2008, Ref. no.: 18621 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight: 103 g Injection pressure: 1600 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Ncedpfxjy Ub D He Adlot Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: good (used), Year of construction: 2008, Ref. no.: 18620 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight: 76 g Injection pressure: 2180 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment Ncedpfjy Ub Dysx Adlet * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.