AMADA EM 2510NT
AMADA EM 2510NT

Name: AMADA EM 2510NT
Brand: AMADA
Availability: InStock

Year of construction

2005

Condition

Used

Location

Poland

Machine data

Machine type:: AMADA EM 2510NT

Manufacturer:: AMADA

Model:: EM 2510NT

Year of construction:: 2005

Condition:: ready for operation (used)

Operating hours:: 14,300 h

Price & Location

Location:: , Poland

Call

Technical details

Travel distance X-axis:: 2,500 mm

Travel distance Y-axis:: 1,270 mm

Controller manufacturer:: AMADA

Controller model:: AMNC-F (FANUC 180i-PB)

Overall weight:: 18,000 kg

Total height:: 2,318 mm

Punching force:: 20 t

Product length (max.):: 5,526 mm

Sheet thickness (max.):: 3 mm

Table width:: 5,120 mm

Number of axes:: 5

Details about the offer

Listing ID:: A21945288

Reference number:: PL-PUN-AMA-2005-00001

Update:: 18.05.2026

Description

This 5-axis AMADA EM 2510NT turret punch press was manufactured in 2005. It features a punching force of 200 kN, a turret capacity of 45 stations, and a maximum sheet size of 1270 × 5000 mm. The machine has a rapid traverse speed of 100 m/min on the X-axis and 80 m/min on the Y-axis. If you are looking to get high-quality punching capabilities, consider the AMADA EM 2510NT machine we have for sale. Contact us for further details.

• X-axis rapid traverse: 100 m/min
• Y-axis rapid traverse: 80 m/min
• Maximum sheet size: 1270 × 5000 mm
• Maximum material thickness: 3.2 mm mild steel
Dsdpfx Aajy S A Tkehjkp
• Maximum sheet weight: 50 kg (feed speed F1) / 150 kg (feed speed F4)
• Positioning accuracy: ±0.07 mm
• Turret capacity: 45 stations
• Turret rotation speed: 30 rpm
• Punching force: 200 kN
• Hits per minute – 1 mm pitch (5 mm stroke): 780 hits/min
• Hits per minute – 25.4 mm pitch, X-axis: 500 hits/min
• Hits per minute – 25.4 mm pitch, Y-axis: 330 hits/min
• Maximum stroke length: 37 mm
• Connected load: 27 kVA
• Air consumption – machine: 250 l/min
• Air consumption – Air Jet vacuum: 250 l/min
• Operating air pressure: 5 bar
• Tooling visible in the photos
• 4 tool cabinets
• Technical documentation (manual scan)
• Machine + included tooling package shown in the photos
• Machine fully operational: Yes (replacement of one pneumatic hose required to eliminate a minor air leak)
• Machine connected to power: Yes

Seller

Registered since: 2017

1,361 listings online

Call

Send inquiry

Telephone & Fax

+49 631 7... show

These listings may also fit your interest.

Listing

Perforating machine AMADA PROMECAM EM2510NT

Vilnius

17,328 km

Perforating machine
AMADA PROMECAMEM2510NT

Call

Condition: used, Year of construction: 2004, operating hours: 26,000 h, functionality: fully functional, 2004 AMADA EM2510NT. Djdpot Hg Acofx Aahekp The perforating machine is in good condition and has always been serviced on time by Amada service representatives. All documentation, service reports are included. Recently replaced bugno encoder. The machine is sold with software and tools. Perforating machine connected, available for testing, inspection. Specification: Year: 2004.07 Made in France. Operating time in hours: 26 426 Hours of power: 65 006 Software: Control unit: AMADA AMNC-F Perforating force: 20 tonnes Stations: 45 Tools: sold with tools Metal length: 2500 mm. Metal width: 1270 mm. Sheet thickness: 3,2 mm. Metal width change: 5000 mm. Workpiece weight: 150 kg. Dimensions: P 6080 x P 5120 x A2318 mm Weight: 16 500 kg Location. Available for testing: Yes If you have any further questions, we will be happy to answer them.

See details

Listing

Scrap baler Aymas Recycling Machinery CP (50x30) Used Beverage Can Baler

Halilbeyli OSB

17,236 km

Scrap baler
Aymas Recycling MachineryCP (50x30) Used Beverage Can Baler

Call

Condition: new, Year of construction: 2025, MACHINERY WILL BE BRAND NEW The machinery is available to bale aluminum cans as well as steel cans up to 0.2 mm of the thickness and 3 liters of the volume. All electric-electronic materials will be from Schneider and Siemens Brand. The machine will be fully automatic with PLC control and a touch screen Siemens HMI Simatic Panel with emergency buttons. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for one (1) year or two thousand five hundred (2.500) operation hours, whichever comes first. There will be an Oil cooling/heating system depending on the operation zone. MB 500 Magnetic Separator and VH (120-250) Vibration Hopper are optional for separating the scrap aluminum and steel cans and for getting rid of the dirt and dust in the scrap. Technical Specifications: Bale Size: 500mm x 330mm x ... Container Dimension (Width x Length x Height): 500mm x 1.000mm x 330mm Capacity Up to 1.000 kg/hour (Aluminum) Up to 2.000 kg/hour (Steel) Bale weighs with a mechanic scale system: 10-20 kg Cycle Time: 30 seconds Top Cover Cylinder Force: 25 tons Main Compression Cylinder Force: 100 tons General Working Pressure: 225 bars Djdpfx Ajrc Dkqoahjkp Machine Dimensions (Width x Length x Height): 1.100mm x 4.200mm x 2.600mm Electric Motor: 18,5 kW Machine Weight: 5.000 kg

See details

Listing

Punching and nibbling machine Amada EM2510 NT + MP 300

Birmingham

18,725 km

Punching and nibbling machine
AmadaEM2510 NT + MP 300

Call

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, punching force: 20 t, 1 Used Amada EM 2510 NT Servo Electric Cnc Punch Press For Sale Make: Amada Model: EM 2510 NT Punching Force: 20 Tons (200 kN). Dksdpfeyyck Sex Aahop Axis Travel (X/Y): 2500 x 1270 mm (expandable for larger sheets) with reposition Turret Configuration: Typically 45-stations with 4 Auto-Index stations. Control System: touchscreen control. Positioning Accuracy: Servo-Electric Drive: Replaces hydraulic systems with a, single AC servo motor (AE) or twin-drive (EM) system. This reduces energy consumption, eliminates oil changes, and minimizes maintenance. High Speed and Productivity: Capable of up to 900 hits per minute for marking, and 370 hits per minute on 1-inch centers. AMNC-F/3i Control: User-friendly, touchscreen interface for fast, error-free operations. Environmental Efficiency: The machine requires a low 19 kVA power hookup, drawing less than 5 kW at maximum power. Quiet Operation: Uses brush-type tables to reduce noise and prevent scratching on the underside of sheets. Tooling Efficiency: Features a "Triplet Track" turret and power vacuum die system to reduce tool changes and prevent slug pulling.

See details

Listing

Vilnius

17,328 km

Punching press
AMADAEM2510NT

Call

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 26,426 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, punching force: 20 t, The punching machine is in good condition and has always been serviced on time by certified Amada service representatives. All documentation is included. The drum encoder was recently replaced. The machine is sold complete with software and tools. The punching machine is connected and can be tested on site. Djdpfx Asw E Emaeahokp Specification: Year: 2004.07 Made in: France Operating hours: 26,426 Power-on hours: 65,006 Control unit: AMADA AMNC-F Punching force: 20 tons Stations: 45 Tools: sold with tooling Software: Linea 5 / Combi 5 (Only works with Windows XP) Sheet length: 2,500 mm Sheet width: 1,270 mm Sheet thickness: 3.2 mm Sheet repositioning: 5,000 mm Workpiece weight: 150 kg Dimensions: L 6080 x W 5120 x H 2318 mm Weight: 16,500 kg Location: Lithuania Test possible: Yes If you have further questions, we will be happy to answer them.

See details

Listing

Kirchen (Sieg)

18,548 km

Machining center
HAASEC-1600

Call

Condition: good (used), Year of construction: 2006, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 813 mm, overall weight: 13,611 kg, table length: 1,626 mm, table width: 914 mm, controller model: HAAS, nominal power (apparent): 22 kVA, rotary table diameter: 760 mm, spindle speed (max.): 6,000 rpm, table load: 4,536 kg, Equipment: chip conveyor, IBN 03/2006 IKZ 70 bar (TSC 1000) WZW 30-fold (BT50) Full 4th axis Dkedevgmr Iopfx Aahop Spindle & gearbox new in 2017 1-shift operation Machine can be inspected under power !!!! free loading until CW04/2025 !!!! (with same-day delivery of our new machine)

See details

Listing

Laser cutting machine Bystronic ByStar Fiber 3015 - 6 kW

Strassberg

18,652 km

Laser cutting machine
BystronicByStar Fiber 3015 - 6 kW

Call

Condition: used, Year of construction: 2017, Working hours laser on: 28.313 h Working hours beam on: 8.421 h Laser power: 6000 Watt Working range laser: 3048 x 1524 x 70 mm Max. steel: 25 mm Max. stainless steel: 30 mm Max. aluminium: 30 mm Max. copper: 12 mm Max. brass: 12 mm Length: 11000 mm Width: 6050 mm Height: 2565 mm Machine weight: 12000 kg Electrical connected load: 31 kW Standard configuration Dksdpeyrfxzefx Aahep - Maximum positioning speed parallel axis x, y: 120 m/min- Maximum simultaneous positioning speed: 170 m/min- Positioning accuracy Pa: +/- 0,05 mm- Repeatability Ps: +/- 0,025 mm- Maximum workpiece weight: 1100 kg- Operation via panel: ByVision Touchscreen and manual control unit Extended machine accessories - nozzle changer 40 positions- Detection Eye - Cut Control- Power Cut Fiber Automation - ByTrans Extended

See details

Listing

Germany

18,384 km

CNC Lathe
TraubTNC 42/65 DGY

Call

Year of construction: 1996, condition: ready for operation (used), Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 78825h. Documentation available. On-site inspection is possible. Dedpfev Scrhjx Aahjkp

See details

Listing

Kaunas

17,400 km

Brake press
EDWARDS PEARSON100/3100

Call

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3 100 mm Dkodpfxsrfx Uts Aahop Bending capacity: 100 T Travel: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Tools: Available Weight: 7 T Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer.

See details

Listing

Mindelheim

18,568 km

Folding machine
MIOTAL®AKB 4010 x 2,0

Call

Condition: new, Working width: 4010 mm Bending capacity (St42): 2.0 mm Bending angle adjustment from/to: 0 - 135° Adjustability of the bending beam: 25 mm Hydraulic motor drive power: 2.2 kW Weight, approx.: 5000 kg Dimensions LxWxH, approx.: 5600 x 1750 x 2050 mm The torsion-free, heavy machine body is designed for very high loads. This machine therefore guarantees a high and consistent quality of your bent products. The integrated tool holder makes it easy to change tools. This means that the AKB folding machine can be easily adapted to your future requirements. Dkodpfxep Dufze Aahop Model description: - MIKRA Bending Control positioning control type "M15S" (alternative control variants optionally available) - Solid and torsion-free welded steel construction - Bending beam adjustment from 0 to 135 - Hydraulically driven upper and bending beam - Clamping pressure of the upper beam can be adjusted centrally from the front on both sides - Crowning of upper, lower and bending beam manually adjustable - Segmented upper beam / upper beam inclination 45° Scope of delivery: - Manual backgauge 600 mm - Tool set: Segmented upper tool Lower beam rail Bending beam rail 25.0 mm - Manual gap adjustment - 3-way foot switch - Control valve for setting the hydraulic pressure from the front - Foot pedal with three functions, handle and emergency stop button - Light barrier - Oil filling - Documentation - CE

See details

Listing

Hawksworth Trading Estate

18,823 km

Press brake
AMADAHFE MK 2 5012

Call

Condition: excellent (used), Year of construction: 2015, Model Amada HFE MK2 5012 50 tons x 1250 , 4 axis CNC Press Brake Year 2015 Tonnage 50 tonnes Max. Bend Length 1250 mm Stroke Length 150 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 55L Motor Power 6KW Weight 2550 Kg Dkedpfxeyym Hko Aahep guarding Erwin Sick machine mounted light screen,side and rear interlocked fencing Dimensions Machine Length 2000 mm Machine Depth 2300 mm Machine Height 2300 mm Distance Between Side Frames 1035mm Beam width 60 mm Table height 960 mm Open Height 370 mm Throat Depth 100 mm

See details

Advertise here

AMADA EM 2510NTAMADA EM 2510NT

Machine data

Price & Location

Technical details

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

AMADA EM 2510NT
AMADA EM 2510NT