Used plasma cutting machines for sale (152)

Year of construction: 2002, condition: refurbished (used), Cutting table / Plasma cutting gantry Hodpfjhzbi Nex Ahvefd Brand: SATO Model: SATRONIK HD 8000 Year 2002 Number of heads: 2 - 1 Kjellberg FineFocus 800 cutting head - 1 Kjellberg FineMaker marking head with PB-M25 W torch Maximum wide cutting capacity: 6,000mm Maximum length wide cut: 24,000mm Controller: SATOCNC 3000 Cutting equipment information: Brand: Kjellberg Model: FineFocus 800 Maximum cutting capacity: 80mm Cutting quality up to: 60mm Maximum drilling capacity: 40mm Maximum current at 100%: 300A Automatic gas console

Condition: good (used), overall weight: 2,400 kg, OXIPLASMA Kompak EKO 3100x1600mm Plasma Cutting Table Brand: OXIPLASMA Model: Kompak EKO 316 Manufactured: 2018 (Installed at client for operation in 2021) Description: Useful cutting capacities: 3,100x1,600mm Travel speed: 30 m/min Hfodewlrukspfx Ahvjd Positioning accuracy: +/- 0.1 mm Motorization: Brushless servos (4 interpolated servo motors (x, y1, y2, z)) Double guidance and traction system Height control managed by the CNC Anti-collision detector with inductive electromechanical impact control Suction table sectioned by zones using the CNC Hypertherm EDGE CONNECT CNC 19" touchscreen Useful head lift: 120 mm Weight: 2,400 kg Cutting capacity: Carbon steel: 32 mm Stainless steel: 20 mm Includes: - Hypertherm HPR 130 XD high-definition plasma equipment - Hypertherm gas console - ROLLAIR RLR 700 screw air compressor, 7.5 HP, year 2007, 10 Bar 5,402 hours - BEKO DryPoint RA air dryer

Condition: ready for operation (used), Type: DS 6001.20P De conventionele plaatbewerkingslijn DS is ontworpen voor zeer efficiënte boren en plasmasnijden, met de mogelijkheid tot automatische plaatinvoer en automatische sortering van onderdelen bij de uitvoer. De machine is speciaal ontworpen voor zware toepassingen in constructiestaal, zoals de productie van zeer nauwkeurige fittingen, hoekplaten en eindplaten. Plasma: - 3D plasma-afschuurkop voor recht snijdend en schuin snijden tot +-50° - Hypertherm XPR 300 (doorboring 45 mm) - Maximale plaatgrootte: 6000 x 2000 mm - materiaaldikte: 3 30 mm Hfedpfx Aoyuk Sxohvsd - laserlicht Plasmamarkering Boren: - MG-40 P26 boorapparaat ISO 40 - boorbereik: diameter 4 40 mm - draad: M4 M33 - maximale dikte: 100 mm - slak: 400 mm - 26 kW op spindel ISO 40 - max. 1829 tpm - automatische gereedschapswisselaar; 8 gereedschapsposities ISO 40 - externe en interne gereedschapskoeling CNC-besturing: iMSNC-systeem voor Windows® 10TM' 64-bit PRO met geïntegreerde netwerkkaart en USB-poort Met een vacuümzuigsysteem kunnen platen op de snijtafel worden geladen Totaalgewicht: 30 ton Benodigde ruimte: 16 500 x 7100 mm

Condition: used, Year of construction: 2024, CNC plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 3001.15P Year of manufacture: 2024 Hfodpfxjytqmmj Ahvjd Working area: 1,500 x 3,000 mm 1 x plasma torch with Kjellberg Q1500 plasma source with automatic O² gas console (O², N²) 1 x TEKA filtration unit for outdoor installation 1 x nesting software in the machine controller Availability: immediately

Condition: ready for operation (used), Year of construction: 2013, This MGM Omnicut 3100 was manufactured in 2013. A robust plasma cutting machine, it features a 12-meter table and a powerful Kjellberg HiFocus 360i plasma source. It efficiently handles mild steel up to 80 mm, stainless steel up to 80 mm, and aluminum up to 100 mm. If you are looking to get high-quality cutting capabilities, consider the MGM Omnicut 3100 machine we have for sale. Contact us for more information. Application Types Cutting Hfedpfx Aox D Npaehvsd

Condition: excellent (used), Year of construction: 2020, PLASMA CUTTING TABLE WITH COMPRESSED AIR: TYPE REMOCUT II 1500-3000/105A PNEUMATIC ENGRAVER Hsdpfeyug Enox Ahvsfd

Condition: ready for operation (used), Year of construction: 2017, General Data Machine weight 9000 kg Measurements height 2300 mm Measurements depth 4300 mm Movement X-Axis Movement 3000 mm Y-Axis Movement 1200 mm Main Drive Number of axis 3 Dimensions Machine Length 15000 mm Hodpfxox D It Re Ahvjfd This 3-axis Hypertherm PL-YPE 3100 was manufactured in 2017 and features a Hypertherm® HyPerformance HPR 400XD gas plasma source. It offers precise cutting with a maximum capacity of 50 mm in mild steel, 75 mm in stainless steel, and 45 mm in aluminum. The effective cutting area is 3000 mm by 1200 mm. If you are looking to get high-quality cutting capabilities, consider the Hypertherm PL-YPE 3100 machine we have for sale. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2015, This KOIKE PNC-12 EXTREME plasma cutting machine was manufactured in 2015. It features a robust CNC control system and an effective cutting area of 1500 x 3000 mm. Capable of handling a maximum cutting thickness of 50 mm and equipped with rapid travel speeds up to 4000 mm/min, it ensures efficient operation. Consider the opportunity to buy this KOIKE PNC-12 EXTREME plasma cutting machine. Contact us for more information about this machine. Hsdex D Nhvepfx Ahvefd Application Types Cutting

Condition: ready for operation (used), Year of construction: 2008, General Data Hfedpfxox D Ey Ij Ahved Measurements width 4100 mm Measurements depth 10169 mm Machine weight 5500 kg Control Unit Brand MicroStep Model IMSNC Main Drive Number of axis 3 This 3-axis MicroStep PLS 7501.25PG plasma cutting machine was manufactured in 2008. It features a robust MicroStep MSNC500 control system and dual cutting capabilities with a HPR 260 AGC plasma and an acetylene gas burner. The machine offers a maximum cutting thickness of 50 mm and operates efficiently within a large working field. If you are looking to get high-quality cutting capabilities, consider the MicroStep PLS 7501.25PG machine we have for sale. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2020, General Data Measurements width 5500 mm Measurements depth 8100 mm Measurements height 2500 mm Main Drive Number of axis 4 Additional Equipment Dust & Fume Extraction System: Air Flow: 12000 m³/h Filter Area: 171 m² Hsdpfx Ahox D Nuisvjfd This 4-axis Baykal BPS-3006 was manufactured in 2020, featuring a CNC Plasma Cutting Machine with a cutting table size of 3000 × 6000 mm. It includes a rotary axis for tube and pipe cutting and is equipped with a Hypertherm HPR 130XD plasma source. If you are looking to get high-quality cutting capabilities, consider the Baykal BPS-3006 machine we have for sale. Contact us for more information about this machine. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2019, Main Drive Hodpfox Enlfex Ahvofd Number of axis 3 This 3-axis ACCURL CPL 2040 plasma cutting machine was manufactured in 2019. It features a cutting width of 2000 mm and a length of 4000 mm. It utilizes a Hypertherm Powermax 125 source, capable of cutting mild steel up to 36 mm, stainless steel up to 20 mm, and aluminum up to 18 mm. Consider the opportunity to buy this ACCURL CPL 2040 plasma cutting machine. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2011, This MicroStep EasyCut 6001.25PrGB was manufactured in 2011. It is a CNC plasma/oxyfuel cutting machine designed for industrial, heavy-duty applications. Features include a large working area of 6000 × 2500 mm, dual-side driven gantry, and compatibility with CAM software like mCAM and AsperWin. It supports up to 6 oxyfuel torches and offers options like automatic height control. Note: the gas console is defective. Contact us for more information about this machine. Application Types Hfodpox D Hz Hofx Ahvsd Cutting

Condition: ready for operation (used), Year of construction: 2021, This ESAB Suprarex HD 4000 plasma cutting machine was manufactured in 2021. It features a track width of 4000 mm and a track length of 12000 mm, supporting a maximum working length of 9000 mm. The machine is equipped for both oxyfuel and plasma cutting, handling material thicknesses up to 200 mm. If you are looking to get high-quality cutting capabilities, consider the ESAB Suprarex HD 4000 machine we have for sale. Contact us for more information. Hfedsx D D N Uspfx Ahvod Application Types Cutting

Condition: ready for operation (used), Year of construction: 2018, This KERF RUM 2500P plasma cutting machine was manufactured in 2018. It features a large cutting area of 15000mm x 2000mm and is equipped with two bridges, each with 275amp plasma. Full history from the manufacturer is available. Contact us for more information about this machine. Application Types Hfjdsx Hbkqspfx Ahved Cutting

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 700 mm Measurements depth 1054 mm Measurements height 978 mm Machine weight 197 kg This Thermal Dynamics UltraCut 200 was manufactured in 2012. It features a robust output current range of 10-200 A and a duty cycle of 100% at 200 A, ensuring continuous operation. The cutting capacity on mild steel reaches up to 40 mm with a maximum edge start of 65 mm. It includes a liquid-cooled XT-300 precision torch and a DFC-3000 digital gas console with touchscreen. For more information about this machine, please reach out to us. Hsdpsx D Ixasfx Ahvjfd Application Types Cutting

Condition: ready for operation (used), Year of construction: 2014, This SAF PRO ALPHATOME 20 40 plasma cutting machine was manufactured in 2014. It features a robust 4000 x 2000 mm table and includes a NERTAJET HP150 plasma source along with PRONEST HYPETHERM NESTING SOFTWARE. Designed for cutting up to 20 mm steel, it ensures precision with CNC control and linear guides on all axes. Consider the opportunity to buy this SAF PRO ALPHATOME 20 40 plasma cutting machine. Contact us for more information. Hfsdjx D D Nhopfx Ahvsd • Table size: 4000 x 2000 mm • Cutting capacity: up to 20 mm steel • CNC control with mouse • CNC control with included cutting software • Linear guides on all axes for high repeatability • Robust base for increased support and rigidity • Country of manufacture: France • CE compliant Additional equipment • NERTAJET HP150 plasma source • PRONEST Hypertherm nesting software

Condition: ready for operation (used), Year of construction: 2017, This ZINSER 2425-I/3600 plasma cutting machine was manufactured in 2017. It features a CNC-controlled system for both plasma and oxyfuel cutting, handling materials up to 35 mm thick and pipes from 100 to 620 mm. The machine offers a working area of 2000 x 8000 mm and includes advanced features like a 3D plasma cutting system, CNC path control, and an integrated network card for enhanced connectivity. For more information about this machine, please reach out to us. Additional equipment • Energy chain for plasma operation • Environmentally friendly extraction system with sectional distribution • Automatic gas console for monitoring and controlling gas flow and pressure Machine Benefits Technical Machine Benefits • High-quality ac servo motors for movement • Automatic initial height detection via nozzle contact • Optimal cutting quality with customized gas mixture • Excellent extraction quality with designed cross distributors • Plasma and oxyfuel cutting • Total table elements: 4 • Dimensions per table element: 2080 × 2100 × 950 mm • Continuous usable work surface: 2000 x 8000 mm (vertical cutting), 1500 x 8000 mm (angled cutting) • Movement feed: 10 to 15000 mm/min rapid traverse: 25000 mm/min • Double-sided, synchronized longitudinal drive via pinion and rack with brushless ac servo motors Extra Information Hfsdpfx Asx D R S Ashvsd Control Unit CNC path control with Windows 8.1 operating system 17" TFT color monitor - Touch Full HD IPC-based with AMD CPU 4x2.0 GHz SSD 64 GB, 4 GB RAM (upgradeable to 16 GB RAM) Ambient temperature +5°C to +45°C at max. 90% humidity, non-condensing 100-240 V AC input voltage Integrated network card Joystick for manual movement Remote maintenance service Cutting range: 0° to 50° vertical stroke Compressed air requirements: max. 7 bar, cleaning pressure 6-7 bar Sound level during filter cleaning: ≤ 75 dB(A)

Condition: ready for operation (used), Year of construction: 2020, This GEPELEKTRO Phantom CNC was manufactured in 2020. It features a large working area with table dimensions of 12,000 × 3,000 mm and is equipped with a Lincoln Electric Burny Phantom II controller. It can handle flame cutting up to 300 mm steel and plasma cutting up to 50 mm steel. The machine includes a complete extraction system and Messer OmniWin 2019 software. Contact us for more information about this machine. Hfsdpox E Edfefx Ahvjd • Condition: Excellent, low operating hours • Status: Connected to power; testable on-site • Working area: Table 12,000 × 3,000 mm • Control system: Lincoln Electric Burny Phantom II • Plasma source: Kjellberg Finsterwalde HiFocus 161i • Maximum cutting thickness: • Oxy-fuel (steel S235): up to 300 mm • Plasma (steel S235): up to 50 mm • Plasma (stainless WNR 1.4301 / AISI 304 / KO-33): up to 40 mm Additional equipment • Complete extraction system • Messer OmniWin 2019 software with hardware key

Condition: ready for operation (used), Year of construction: 2016, total height: 1,155 mm, controller manufacturer: SIEMENS, This SPIRO 6000V4 plasma cutting machine was manufactured in 2016. It features a large work table of 6000 x 1500 mm and can handle materials up to 6 mm thick, including steel and aluminum. Equipped with a SIEMENS controller and HYPERTHERM POWERMAX 1000 plasma source, it supports DXF file import/export. Ideal for medium to large industrial settings. Contact us for more information about this machine. Additional equipment • Plasma Source: HYPERTHERM POWERMAX 1000 Machine Benefits Technical Machine Benefits • Galvanized steel: 6 mm • Black steel: 6 mm • Cutting gas: air (dry and clean) • Cutting gas flow: 170 l/min • Cutting gas pressure: 6 bar • Exhaust system efficiency: 6000 m3/h Extra Information Machine still under power Hedpfxjx D D I Rj Ahvofd Dimensions Machine Depth 7000 mm

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 2,000 mm, travel distance Y-axis: 8,000 mm, This 5-axis AJAN PP 260 A-5T plasma cutting machine was manufactured in 2015. It features a robust AJAN PP260A power source with a cutting capacity of up to 65 mm for mild steel and 50 mm for stainless steel and aluminum. The large working area spans 2000 mm by 8000 mm, and it includes an AJANCNC 952 Controller for precise control. Consider the opportunity to buy this AJAN PP 260 A-5T plasma cutting machine. Contact us for more information. Additional equipment • Cutting Gases: O₂, N₂, F5, H35 / Table Ventilation: Mechanical valve with JET filtration system/ Optional Features: Oxy-fuel torch, pipe cutting unit, industrial fume extraction system Machine Benefits Technical Machine Benefits Hfsdpeyaiyxefx Ahvjd • Cutting capacity: mild steel: up to 65 mm/ stainless steel: up to 50 mm/ aluminum: up to 50 mm • Piercing capacity: mild steel: 40 mm /stainless steel: 25 mm /aluminum: 25 mm • Max. Positioning speed: 15 m/min • Positioning accuracy: ±0. 01 mm • Number of axes: 5 (with bevel cutting capability) • Control system: linux-based / software: ajancad and ajancam v7. 0

Condition: ready for operation (used), Year of construction: 2017, This KOIKE PNC 12 Extreme plasma cutting machine was manufactured in 2017. It features a complete plasma cutting system with a water tank and base frame, an oxyfuel torch tested only once, and includes software for nesting and programming. The Hypertherm Powermax 1250 power supply ensures reliable operation. Contact us for more information. • Plasma cutting system: PNC 12 Extreme Hodpfsx S Skfox Ahvofd • Complete with water tank and base frame Additional equipment • 1x oxyfuel torch (only tested once) • Hypertherm Powermax 1250 plasma power supply • Software for nesting and programming • Consumable parts

Condition: ready for operation (used), Year of construction: 2021, number of axes: 2, Plasma cutting machine manufactured in 2021. This Hypertherm HPR170 machine features a sturdy construction capable of handling up to 100 mm material thickness and high-quality linear guides for precision. With digital, maintenance-free AC servos, it offers impressive speeds of up to 40,000 mm/min. Consider the opportunity to buy this Hypertherm HPR170 plasma cutting machine. Contact us for further details. Hfsdpfoylbdyox Ahvsd • Working area: approx. 3,000 x 1,500 mm • Material thickness capacity: up to 100 mm • Construction: sturdy build • Guides/drive: high-quality linear guides; backlash-free drive on both sides • Servo system: digital, maintenance-free AC servos with IRC • Encoder: IRC 2500 (incremental encoder) • Max speed: up to 40,000 mm/min

Condition: ready for operation (used), Year of construction: 2012, total width: 4,650 mm, total height: 1,660 mm, product length (max.): 15,000 mm, table load: 1,000 kg, number of axes: 3, This 3-axis ESAB Combirex DX3500 Oxy was manufactured in 2012. It features a cutting area of 2,700 x 12,950 mm and a maximum material thickness of 125 mm. The machine is equipped with an ESAB Precision Plasma M3 Gen 2 generator and a CNC Vision 51 control system. If you are looking to get high-quality plasma cutting capabilities, consider the ESAB Combirex DX3500 Oxy plasma cutting machine we have for sale. Contact us for further details. • Table size: 2,500 x 13,000 mm • Cutting area: 2,700 x 12,950 mm • Table height: 700 mm • Max material thickness: 125 mm • Plasma generator: ESAB Precision Plasma M3 Gen 2, 360 A • Plasma torch: PT 36 • Gas torch: Cool Jet (1 unit) • Control system: CNC Vision 51 • Power supply: Machine 1 x 230 V 50 Hz; Plasma 3 x 400 V 50 Hz • Operating hours: • Plasma torch: 2,795 h • Gas torch: 1,979 h • Gantry and drive: • High-performance cutting gantry • Linear control, AC motor drives, double-sided rack and pinion • Positioning speed max. 24,000 mm/min • Continuous gantry position monitoring • Plasma and gas cutting: • Plasma gases: Technical air, N₂, O₂, H35 • Max piercing: 40 mm (CS/SS/Al) • Cutting speed (CS): 12 mm – 4,200 mm/min; 25 mm – 2,000 mm/min; 38 mm – 1,000 mm/min • Automatic piercing, capacitive height control Hfodpfx Ajyrf Szshvod • HF start system • Cutting quality: ISO 9013 Class 3 • Protection and environment: • Dust protection: IP54 • Relative humidity: 10–85% (no condensation) • Dimensions and installation: • Cutting table: 17-section Additional equipment • Filter unit: ECO 16 CT (extraction/filtration)

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,800 h, table load: 7,500 kg, This VOORTMAN V320 was manufactured in 2019. It features a Kjellberg Smart Focus 300 plasma source and a Donaldson DFPR06 extraction system. Capable of handling mild steel with a panel length range of 850 – 6,100 mm and thickness from 6 – 75 mm. It includes options for punch marking and countersinking, enhancing versatility. Consider the opportunity to buy this VOORTMAN V320 plasma cutting machine. Contact us for more information about this machine. • Workpiece size • Min./max. panel length: 850 – 6,100 mm • Min./max. panel width: 200 – 2,050 mm • Min./max. panel thickness: 6 – 75 mm • Drilling unit: VD40 • Mounting: SK 40 • Axis speed: 0 – 2,500 rpm (continuously variable, servo motor) • Drill diameter: 5 – 40 mm • Threading: M6 – M30 • Countersinking: Yes • Punch marking option: Yes • Layout marking option (optional): Yes • Automatic tool changer: 2 x VTC 5/40 (2 x 5 positions) • Lubrication/cooling: Internal cooling, air/oil • Hydraulic mounting: Yes • Rated load: 30 kW • Feeding and positioning: Synchronously driven servo motors, servo converter • Cutting – Plasma (Smart Focus 300) • Min./max. thickness: 3 – 80 mm • Max. piercing capacity: 40 mm • Virtually slag-free cutting: up to 35 mm • Marking: Yes, with the same consumables • Gases: • Plasma gas for cutting mild steel: O2 (99.9% pure, clean, dry, oil-free) • Shielding gas for mild steel: O2 / Air (99.9% pure, clean, dry, oil-free) • Marking gas: Argon; for >200 A, nitrogen • Automatic gas console: Yes • Automatic height adjustment: Yes • Ignition: Automatic • Cutting speed (mild steel): • 6 mm: approx. 3,700 mm/min @ 90 A • 12 mm: approx. 3,600 mm/min @ 200 A • 25 mm: approx. 1,600 mm/min @ 300 A • 40 mm: approx. 720 mm/min @ 300 A • 50 mm: approx. 400 mm/min @ 300 A • 80 mm: approx. 100 mm/min @ 300 A • Cutting – Oxy-fuel (oxygen cutting unit) • Nozzle type: Nozzle-mix • Automatic height adjustment: Yes • Gas supply: Magnetic valve with non-return valve • Fuel gas: Propane (optional: Acetylene) • Cutting gas: O2 • Max. thickness: 75 mm • General/installation • Working direction: Left to right • Working height: 760 mm (+/- 25 mm) • Ambient temperature: -10°C to +35°C, max. 95% relative humidity • Voltage regulator: Not included • Current transformer: Not included Additional equipment • Kjellberg Smart Focus 300 plasma source (included) • Donaldson DFPR06 extraction system (included; last filter change January 2025) Hsdpsx D N Aasfx Ahvefd

Condition: ready for operation (used), Year of construction: 2012, total height: 2,100 mm, controller manufacturer: ESAB, controller model: EPP-360 Vis 51, number of axes: 3, This 3-axis ESAB Combirex DX 4000 plasma cutting machine was manufactured in 2012. It features the ESAB WELDING & CUTTING Vission 51 control and a Precision Plasmarc 368 plasma source. Capable of cutting up to 40 mm with plasma and 300 mm with gas, it offers a cutting area of 3000 × 13000 mm. Consider the opportunity to buy this ESAB Combirex DX 4000 plasma cutting machine. Contact us for more information. Machine Benefits Technical Machine Benefits • Work table height: 660–762 mm • Recommended max plate width: 3000 mm • Rail gauge: 4000 mm • Internal clearance: 3683 mm • Maximum table outside width: 3454 mm • Cutting area: 3000 × 13000 mm • Plasma cuts: up to 40 mm • Gas cuts: up to 300 mm • Parking area: 1440 mm • Power requirement: 230/460/575 vac, 50/60 hz, single-phase, 30 amp (special input voltages available upon request) Extra Information Movement Axes: 3 Max Cross Travel with 1 Tool: 3500 mm Max Cross Travel with 2 Tools: 3500 mm Max Cross Travel with 3 Tools: 3300 mm Max Cross Travel with 4 Tools: 3100 mm Max Cross Travel with DMX: 3130 mm Max Cross Travel with DMX + 1 Oxy: 2920 mm Max Cross Travel with DMX + 2 Oxy: 2710 mm Max Cross Travel with DMX + 3 Oxy: 2500 mm Hfodpfx Aex R E Smohvod Main Drive Plasma Source: Precision Plasmarc 368 Plasma Coolant Circulator: CC-11 COOLANT CIRCULATOR