Used Cnc Plasma Cutting Systems for sale (51,298)

Year of construction: 2014, condition: ready for operation (used), A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioning in 2014. Nwsdpfx Ajwmqwyebwsi

Year of construction: 2007, condition: ready for operation (used), A Kjellberg plasma cutting system is available. Plasma source: Kjellberg HiFocus 160i, max. material thickness: 40mm, track width: approx. 3100mm, gantry dimensions X/Y: 2000mm/2000mm, runway height: 500mm, working dimensions X/Y: 2000mm/12000mm. The machine was expanded with inkjet in the year 2015. Including suction and filter. The control was renewed in the year 2021. Documentation available. An inspection on site is possible. Nodpfxsxwn Ins Abwewi

Condition: ready for operation (used), A CNC gantry plasma and flame cutting machine is available. Working dimensions X/Y: 6500mm/2500mm, power source: Kjellberg, max. number of torches: 3, control: Heidenhain TNC 355. An on-site inspection is possible. Nwjdpfxox A Hhds Abwoi

Year of construction: 2011, condition: ready for operation (used), A Trumpf laser cutting system with automatic Trumpf Liftmaster is offered. Laser power: 5000W, laser type: Trumpf TruFlow 5000 CO₂ laser, wavelength: 10.6µm, working area X/Y: 3000mm/1500mm, Z-axis travel: approx. 115mm, max. table load: approx. 900kg, max. simultaneous speed X/Y: approx. 300m/min, max. sheet thickness mild steel/stainless steel/aluminum: approx. 25mm/20mm/12mm, operating hours (as of 12.06.2025): approx. 74181h, max. sheet format LiftMaster: approx. 3000mm/1500mm, max. LiftMaster load capacity: approx. 917kg, max. LiftMaster sheet thickness range: 20mm-25mm. Including peripheral equipment and accessories. Machine dimensions X/Y/Z: approx. 11250mm/4600mm/2400mm, weight: approx. 12500kg. Documentation available. An on-site inspection is possible. Njdpfxozpyxie Abwjwi

Condition: used, Year of construction: 2009, CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 Year of Manufacture: 2009 CNC Control: Global Control Plus Track width: 4,000 mm 2 x Plasma with Hypertherm HPR260 power source Nedpfx Aezmv Dcebwswi Travel length: 10 m 2 x oscillating conveying tables Size: 3 x 3 m each Without filter system 22726ä

Condition: ready for operation (used), Year of construction: 2016, MicroStep Master Cut Eco Plus CNC plasma cutting system with nesting software Year of manufacture: 2016 Power source: Kjellberg HiFocus 161i Provision for retrofitting an oxy-fuel torch including Kemper filter system Nedpszpf U Nofx Abwswi Maximum working area: 3000x1500mm Machine location: Hall in Tirol Immediately available

Condition: excellent (used), Year of construction: 2019, operating hours: 630 h, functionality: fully functional, Becky Job Master 6.20P CNC plasma cutting system Year of manufacture: 2019 Power source: Hypertherm XPR170 Machine software included, nesting software excluded Nodpszpf Uvofx Abwewi Donaldson dust extraction system, 5.5 kW Excluding disassembly and delivery The machine is being sold due to the purchase of a laser cutting system. Location: Vorarlberg

Year of construction: 2016, condition: ready for operation (used), A Trumpf CNC laser cutting machine is offered for the precise cutting of mild steel, stainless steel and aluminum sheets. Working range X/Y: 4000mm/2000mm, Z-axis travel: 115mm, laser power: 5000W, max. sheet thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm. Including various peripheral equipment and accessories. Overall dimensions X/Y/Z: approx. 11500mm/5500mm/2300mm, weight: approx. 18t. Documentation available. An on-site inspection is possible. Nedpfxezpa Sie Abwewi

Condition: as good as new (ex-display), Swift-Cut CNC plasma cutting machine, type 1250Pro WT with water table and marking unit Cutting area 1250 x 1250 mm with ESAB power source Technical data: Njdpfxjy Sxvhe Abwjwi - Cutting area for sheet metal formats up to 1250 x 1250 mm - Table dimensions 1980 mm x 1840 mm - Table weight 800 kg - Table capacity 160 l - Height 1500 mm - Z-axis travel 130 mm - Max. load capacity 200 kg/m² - Traverse speed 20 m/min - Guides: Hybrid servo motors and double-sealed linear bearings on all axes. - Closed ball screw-driven Z-axis. Double-driven Y-axis. - Bridge clearance 150 mm - Max. material thickness 25 mm - Max. cutting capability for square tubes 100 mm - Required compressed air pressure 7-7.5 bar - Flow rate 300 LPM - Linear positioning accuracy 0.5 mm/m - Repeatability 0.4 mm/m - Measurement of roundness tolerance 0.3 mm/m FURTHER DETAILS AVAILABLE UPON REQUEST.

Year of construction: 2004, condition: ready for operation (used), A mechanized Kjellberg CNC plasma cutting system is offered. Cutting current range: 40A-200A, duty cycle: 100%, output power: 200A at 150V, lower operating point: 60A at 104V, material thickness range: approx. 3mm-60mm, maximum piercing capacity: approx. 30mm, applicable plasma gases: air, oxygen, argon/hydrogen mixture, nitrogen, suitable materials: mild steel, stainless steel, aluminium, electrically conductive materials. Dimensions: approx. 980mm/644mm/1320mm, weight: approx. 370kg. Inspection possible by arrangement. Nodszmh T Nspfx Abwewi

Condition: used, Year of construction: 2019, CNC gantry plasma cutting machine Manufacturer: Microstep Type: MG 4501.20 BkP Year of manufacture: 2019 CNC control Working area: 2,000 x 4,500 mm 1 x 2D plasma torch with Hypertherm XPR300 power source, including Optimix gas console 1 x Drilling spindle, 26 kW, up to 40 mm diameter, including 8-position tool changer 1 x Preparation for retrofitting a rotator (for bevel cuts) 1 x Nesting program on the CNC control ä22726 Njdpfxsyay H Ao Abwjwi

Condition: used, Year of construction: 2020, CNC gantry plasma cutting machine with skew rotator beveling unit Manufacturer: Messer Type: Multitherm 4000 Year of manufacture: 2020 CNC control: Global Control Plus Working area: 3 x 10.8 m Track width: 4,000 mm 1 oxy-fuel torch ALFA 1 plasma torch with skew rotator beveling unit Power source: Hypertherm XPR300 Cutting thickness: 50 mm piercing 80 mm cutting Beuting extraction table without filter system Software: Omniwin with Bevel Nwjdpfx Abex Dlwmowoi ä22726

Year of construction: 1999, condition: ready for operation (used), A ZinserCNC plasma cutting machine is offered, max. plasma capacity: 130A, max. plasma material thickness: approx. 25mm, max. oxy-fuel material thickness: approx. 200mm, cutting table dimensions X/Y: approx. 2750mm/10500mm, working area X/Y: approx. 2000mm/9000mm, X/Y drive: rack and pinion, control: Zinser CNC 500. Inspection possible by appointment. Nedpfszklgbjx Abwewi

Condition: used, Year of construction: 2017, CNC gantry plasma cutting machine (beveling unit) Manufacturer: Zinser Type: 2425-I/3600 Year of manufacture: 2017 CNC control: 5010 Travel length: 11 m Oxy-fuel cutting table with oscillating conveyor system, including dust extraction system Nedpfsw Rpvbox Abwswi Dimensions: 2,000 x 8,000 mm 1 plasma torch with Hypertherm XPR300 power source Automatic gas console Includes automatically rotating plasma beveling unit Bevel System 2015/350 Downflow 3DFP9-SP filter system Power: 9 kW Laser diode 22726

Condition: used, Year of construction: 2016, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Eco (A) Plus Year of manufacture: 2016 CNC control Working area: 1,500 x 3,000 mm 1 x plasma cutter with Kjellberg HiFocus 161i power source Prepared for retrofitting with an oxy-fuel torch Kemper System 8000 filter system with pre-separator Asper Basic nesting software on the CNC control ä22726 Nsdpey Auxmsfx Abwewi

Condition: used, Year of construction: 2005, CNC gantry plasma cutting machine Manufacturer: Messer Type: Omnimat L8000 Year of manufacture: 2005 CNC control: Global Control Plus Track gauge: 8,000 mm Equipment: 1 x oxy-fuel bevel cutting unit DAF/L for weld preparation (bevels) 1 x skew rotator with Kjellberg FineFocus 800 power source 3 x oxy-fuel torches ALFA 1 x marking unit FineMarker Nsdpfx Aeykruasbwjwi Without table, filter, and track ä22726

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Messer Cutting Systems Nwedpfx Aoyhd Rbobwji Type: MetalMaster 2.0 6025 Year of manufacture: 2023 CNC control: Global Control 2.0 Working area: 2,500 x 6,000 mm 1 x plasma torch with Kjellberg HiFocus 280i neo power source Automatic gas control unit Filter system Donaldson DFPRO 6 Cyclopeel Cutting software Omniwin Standard Availability: immediate ä22726

Condition: good (used), Year of construction: 2008, CNC gantry plasma cutting machine Manufacturer: Messer Type: Multitherm 4000 CNC control: Global Control Plus Year of manufacture: 2008 Retrofit: 2019 Extraction table: 2,000 x 3,000 mm 1 oxy-fuel torch ALFA 1 plasma torch Power source: Kjellberg HiFocus 280i Filter system: Z-Line 9 ZDC Nsdpfx Abeiff Daewswi We have our own technicians available for installation, commissioning, and training! All spare parts are in stock. 22726

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support). Nwsdpfx Astp Dhpobwoi  Emergency stop with stop cord.  Year of build: 2013.

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) Njdpfx Abjvpalajwewi ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: new, Year of construction: 2024, Everything can be configured according to your needs, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Steel welded construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek software with automatic nesting Position determination of the sheet to be cut using a laser DURMA torch height control Double-sided drive system (rack and pinion) AC servomotors for movement in the X and Y axes CNC control outputs/inputs for the filter unit Consumables starter kit Plasma torch * Ignition console * Torch height control with Ball screw spindles on double Linear guides * Optional equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Nedpfofiqgrox Abwowi Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch CE standard safety wire Automatic gas console for Hypertherm Manual gas console for Hypertherm Oxy-fuel cutting torch Plasma torch protection system Manual plasma angle cutting head CNC angle cutting head (+/- 45) Single drilling head Multi-drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning light for errors and program end With over 60 years of experience in the research and production of machines for sheet metal processing, with 8,000 machines produced annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our showroom offers you the opportunity to gain an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our mission is to be your direct point of contact on site and to offer you services related to training and customer service. We are now happy to support you from Germany – from consulting to purchasing and throughout the entire life cycle of your machine. With our German branch, we are always there for you, so that we can react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Condition: new, Year of construction: 2024, Everything is configurable upon request, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Steel welded construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek software with automatic nesting Position determination of the sheet to be cut using a laser Nsdefirx Tjpfx Abwswi DURMA torch height control Double-sided drive system (rack and pinion) AC servo motors for movement in the X and Y axes CNC control outputs/inputs for the filter unit Consumables starter kit Plasma torch * Ignition console * Torch height control with Ball screws on double Linear guides * Optional equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch HPR 260 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch CE standard safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Oxy-fuel cutting torch Plasma torch protection system Manual plasma bevel cutting head, CNC bevel cutting head (+/- 45). Single drilling head Multi-drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning light for errors and program end D9hnyc97o With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact person from the Durmazlar team, who will competently assist you with advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to get an overview of our machines on site, to be convinced firsthand by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct contact person on site and to offer you services relating to training and customer service. We would now like to support you from Germany – from advice to purchase and throughout the entire life cycle of your machine. With our German branch, we are always on site when you need us to be able to react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions when it comes to sheet metal processing.

Year of construction: 2024, condition: new, Machine dimensions: • (L x W x H) 5,240 mm x 3,600 mm x 2,400 mm • Width with console: 7,700 mm • Length with filter: 11,000 mm Technical details: • Max. sheet size: 4,000 x 2,000 mm • Cutting speed: 12 m/min • Positioning accuracy: ± 0.1 mm • Repeatability: ± 0.1 mm • Power (Hypertherm XPR 170 XD Optimix): 170 A • Cutting range: • Unalloyed steel, piercing, argon: 40 mm • Unalloyed steel, piercing, air: 35 mm Nwodpfodyfwkox Abwsi • Unalloyed steel, contour cutting: 60 mm • Alloyed steel, piercing: 22 mm • Alloyed steel, contour cutting: 38 mm • Aluminum, piercing: 25 mm • Aluminum, contour cutting: 38 mm Standard equipment: • Control system: Durma Aurora CNC controller • Truehole Standard • Sheet metal measurement using laser • Torch height control • AC servo motors for X and Y axis • Software: Lantek or Metalix CAD/CAM software with autonesting • 50 pre-programmed part geometries for easy and quick modification • Consumable kit (torch nozzles, etc.) • Plasma torch • Ignition console • Remote control: remote maintenance Options include: • Hypertherm XPR 170 XD + Optimix + automatic gas control • Filter for HPR 170 XD • Safety system with surrounding safety wire • Oxy-fuel torch with sensor • Plasma torch – interruption system • Air dryer

Year of construction: 2024, condition: new, Everything can be configured according to your requirements; very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Steel welded construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek software with automatic nesting Position determination of the sheet to be cut using a laser DURMA torch height control Double-sided drive system (rack and pinion) AC servomotors for movement in the X and Y axes CNC control outputs/inputs for the filter unit Consumables starter kit Plasma torch * Ignition console * Torch height control with Ball screw spindles on double Linear guides * Optional equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch CE standard safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Oxy-fuel cutting torch Plasma torch protection system Manual plasma angle cutting head, CNC angle cutting head (+/- 45). Single drilling head Nodpfjfirx Njx Abwswi Multi-drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning light for errors and program end With over 60 years of experience in research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced manufacturing plants with a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned producers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Giessen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to get an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our mission is to be your direct contact on site and offer you services related to training and customer service. We are happy to support you now from Germany - from consulting, through purchasing and throughout the entire service life of your machine. With our German branch, we are always available locally when you need us in order to react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions when it comes to sheet metal processing.

Condition: new, Year of construction: 2025, PLA-65A PLASMA CUTTER The machine, which is able to make fast, precise and high-quality cuts up to 25 mm, was specially developed for manufacturers of ventilation ducts, advertisers and customers using thin sheets. Together with the economic price, this machine CNC plasma cutting machines equipped with ergonomic functions have become an indispensable helper for customers in this matter industry. Technical data: Hypertherm Powermax plasma source Power: 65A Max power consumption 11 kw Speed m / min 20 X / Y / Z 1500 3000 150 working area Weight: 1000 kg Loudness: 69 dB (A) Dimensions: Length: 3700 mm Width: 2200 mm Height: 1300 mm Equipment: Source - power hypertherm max 65A Controler CNC +THC Nodpfxsfwmrpe Abwswi PC computer