Used water-jet cutting equipment and machines for sale (44)

Condition: new, Year of construction: 2026, functionality: fully functional, CMS Smartline 2040 Demo Machine - Available in May 2026 Axis-Movement: X-Axis: 4.000 mm Y-Axis: 2.000 mm Ppedpfx Ahsy H Hbnoyjr Z-Axis: 150 mm included options: - 1x 5-axis cutting head with automatic taper compensation - Height sensor with anticollisionsensor - Software IGEMS - Abrasivtank and automatic abrasive doser High Pressure Pump Jetpower Evo Power consumption: 29 kW Electric connection: 400 V +/- 5% / 50 Hz Max. Pressure 4.150 bar Water flow rate: max. 2,8 ltr. / min

Condition: excellent (used), Year of construction: 2018, operating hours: 241 h, functionality: fully functional, machine/vehicle number: Maschinen-Nr. 8914, working range: 4,250 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 1,000 kg, type of input current: three-phase, input voltage: 400 V, table length: 4,650 mm, table width: 2,050 mm, pressure: 4,150 bar, travel speed (max.): 40,000 mm/min, table load: 1,000 kg, total height: 3,800 mm, total length: 6,700 mm, total width: 3,000 mm, compressed air connection: 8 bar, pump pressure: 4,150 bar, overall weight: 4,500 kg, product height (max.): 350 mm, power: 30 kW (40.79 HP), We are offering this very well-maintained CMS brembana idroline S waterjet cutting machine, year of manufacture 2018, for immediate sale. This is a rare opportunity to acquire a machine with very low operating hours—only 241 hours!—and in excellent condition. If you are looking for a robust, reliable, and precision machine, this model comes with a 5-axis head, Easy-Stone software, and a 15" TFT color display with membrane keyboard. It features the CMS Powder Free system, with guides protected against water and dust [rack and sliding guides are protected within the structure by a labyrinth seal]. The bridge design includes gantry drive, allowing workpiece supports up to 1000 kg/m². The machine weighs approximately 4,500 kg (without water). Equipped with lift doors on both the front and rear, ensuring no splashing water or abrasive sand ends up on the workshop floor. Sand is removed from the water tank via a chain conveyor. Abrasive material feeder for up to 330 kg of abrasive. The tank holds 8,000 liters of water. High-performance Greenjet EVO pump, 4150 bar / 30 kW / 40 HP / 400 V ±5%, 50–60 Hz. Manufacturer: CMS Model: brembana idroline S Ppsdpfx Ahsyti Iisyor Year: 2018 Machine type: Waterjet cutting machine If you have any questions or would like more information, please feel free to contact us by message or phone.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 1,760 h, functionality: fully functional, For sale: professional abrasive waterjet cutting machine MAXIEM 1530 by OMAX Corporation. Fully operational, ready to work. Technical specifications: - Work envelope X-Y: 3,100 × 1,575 mm - Pump: OMAX P2050V Direct Drive 30 HP (22 kW), up to 50,000 PSI (3,450 bar) - Control: IntelliMAX Basic with CAD/CAM - Drive: closed-loop, hardened precision ground shafts, linear encoder - Traverse speed: up to 20 m/min - Accuracy: ±0.13 mm - Z-axis: motorized Included accessories: - Terrain Follower, Optic Locator - 200 L abrasive delivery system Psdpfx Asy Hgrmjhyopr - Basic tool box kit - Tool cabinet

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,118 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 300 mm, table load: 790 kg, overall weight: 40,000 kg, number of axes: 5, This 5-axis Bystronic Byjet L 2030 was manufactured in 2004. It features a maximum cutting speed of 30 m/min and a maximum material thickness of 200 mm. The machine has a substantial workpiece weight capacity of 4,740 kg and a load capacity on the cutting grate of 790 kg/m². If you are looking to get high-quality waterjet cutting capabilities, consider the Bystronic Byjet L 2030 machine we have for sale. Contact us for further details. • Machine Tolerance (VDI 3441): ±0.05 mm/m • Repetition Tolerance: ±0.025 mm/m • Max. Simultaneous X/Y Positioning Speed: 56 m/min • Max. Cutting Speed: 30 m/min • Max. Material Thickness (loadable): 200 mm • Max. Workpiece Weight (flat part): 4,740 kg • Cassette Size (with integrated grate): 2000 x 3000 mm • Grate Slat Load Capacity (standard): 250 kg • Machine Weight (with options/aggregates): 11,300 kg • Machine Weight (fully loaded with steel): 40,100 kg • CNC Rotary Axis: Max pipe length 1700 mm, max diameter 200 mm (with centers) / 500 mm (with custom jaws), max weight 500 kg • Drilling Axis: Max diameter 3 mm, max depth 70 mm, speed 2600 U/min • Pump Type: Bypump 50 APC • Max. Dynamic Pressure: 3800 bar • Connected Load (Total): 61 KVA Ppsdpjy Duytefx Ahyer • Input Voltage: 3 x 400 V, 50/60 Hz • Operating Hours: 18,118.3 hours Additional equipment • Lifting Yoke Max. Load (single cassette): 4,500 kg • Cooling Unit: WKL 140 S3

Condition: excellent (used), Year of construction: 2017, operating hours: 2,300 h, functionality: fully functional, machine/vehicle number: 2040 Waterjet, workpiece weight (max.): 11,975 kg, type of input current: three-phase, feed length X-axis: 4,216 mm, feed length Y-axis: 2,134 mm, feed length Z-axis: 305 mm, total height: 2,692 mm, total length: 4,902 mm, total width: 2,134 mm, For sale: MAXIEM 2040 (OMAX) waterjet cutting system, manufactured in [year], designed for precision cutting of a wide range of materials including metal, stainless steel, aluminum, stone, glass, plastic, etc. Ideal for industrial production or machining workshop. Main features: - Working area: 2040 mm - Cutting system: waterjet (abrasive waterjet) - CNC control included, 5 axes - Condition: operational, well maintained - Ergonomic design and safe operation The machine has been used under good conditions and can be demonstrated in operation upon request. The system is sold together with the associated equipment (details on request). Podpfxsy E Tr Ds Ahyepr

Condition: used, Year of construction: 2019, Waterjet cutting machine with plasma Manufacturer: TCI Cutting Model: BP-C 4020 Year of manufacture: 2019 CNC control: TCI CNC 4.0 Working area: 4x2 m Equipment: 1 cutting head KMT OEM SL-VI 50 HP 4,000 bar with high-pressure pump Ppsdpfxeykqwto Ahysr 1 plasma cutting head with Hypertherm XPR300 power source High voltage control system TCI SRA 4.0 Abrasive transfer system Abrasive measurement system Collision protection system Water treatment unit TCI HIDROSYSTEM 2.0 Sludge removal system Software: Lantek Expert 2D with automatic nesting function

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, warranty duration: 24 months, power: 30 kW (40.79 HP), OMAX MAXIEM 2040 3D, 30 kW MAXIEM Pump and A-JET Tilting Cutting Head Factory-refurbished with manufacturer certification and a two-year warranty. The waterjet cutting system configuration is freely selectable. Feel free to contact us and let us know your desired configuration. Customers searching for efficient and cost-effective waterjet cutting systems will find their ideal solution in the Modular Line MAXIEM. These powerful MAXIEM systems combine operational flexibility and affordability, and can be expanded with a broad range of accessories to suit your specific cutting needs. With the modular MAXIEM line, OMAX delivers advanced, reliable waterjet cutting technology at an economical entry price, thereby opening up the advantages of this technology to a wide array of application areas. Leasing with highly attractive terms is available on request, for example, for up to 86 months. - Accuracy up to ±0.05 mm - Software and machine components based on the latest OMAX standards With the 3D A-JET cutting head, the MAXIEM achieves cutting precision of under 0.1 mm. The 3D head enables bevel cuts up to 60° and compensates for cutting angle errors. Podpfx Ahsrm Ilfjyepr The machine is currently being factory-refurbished; the images are thus similar to the actual offering. Prompt delivery can be arranged with INNOMAX AG.

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,400 mm, table length: 3,900 mm, table width: 2,400 mm, warranty duration: 24 months, power: 37 kW (50.31 HP), OMAX 55100 TiltaJET, 37 kW EnduroMAX pump and TiltaJET for perfectly perpendicular cuts Factory-refurbished with manufacturer certification and a two-year warranty! The configuration of the waterjet cutting system can be freely selected. Feel free to contact us with your individual configuration requirements. Customers searching for efficient and highly precise waterjet cutting systems will find their solution within the OMAX premium line. These powerful and extremely precise machines combine operational flexibility with the highest precision in the waterjet cutting sector. The systems can be equipped with a comprehensive range of accessories tailored to your specific cutting tasks. OMAX waterjet cutting systems are revolutionizing tool and mold making as well as single-part and series production. They are also widely used in various areas of mechanical and plant engineering. Financing via leasing is available upon request under highly attractive conditions, e.g. for up to 86 months. - Accuracy up to ± 0.02 mm Ppedpfjrm Imnex Ahysr - Machine components and software are up to date with the latest OMAX technology With the TiltaJET swiveling cutting head, the OMAX system achieves a cutting accuracy of up to ± 0.02 mm. The swiveling head automatically compensates for taper errors at the cut edge, regardless of the selected quality level or cutting speed. The machine is factory-refurbished; therefore, images may vary from the actual offer. Prompt delivery can be arranged with INNOMAX AG.

Condition: good (used), Year of construction: 2017, operating hours: 12,900 h, functionality: fully functional, machine/vehicle number: 20170777, repeat accuracy: 0.03 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.06 mm, type of input current: three-phase, input voltage: 400 V, operating pressure: 4,000 bar, power of the servo motor: 37,000 W, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 200 mm, total height: 3,500 mm, total length: 6,200 mm, total width: 3,200 mm, water pressure: 4,000 bar, control cabinet height: 1,950 mm, compressed air connection: 7 bar, pump pressure: 4,000 bar, control cabinet width: 800 mm, overall weight: 7,500 kg, product height (max.): 200 mm, input frequency: 50 Hz, power: 37 kW (50.31 HP), Equipment: safety light barrier, Waterjet cutting system Perndorfer type WSS4020, table size 4000/2000 mm, high-pressure pump BFT Ecotron with 37 kW and 4000 bar cutting pressure, 3D cutting head for contour cutting. The machine is used and in good condition, and has recently undergone an overhaul by the manufacturer. The machine can be inspected and tested at any time. Pedpfxjx H Ny Ts Ahyopr

Condition: used, Year of construction: 2006, operating hours: 7,600 h, functionality: fully functional, machine/vehicle number: 365591, working range: 4,250 mm, travel distance X-axis: 2,200 mm, travel distance Y-axis: 4,250 mm, travel distance Z-axis: 200 mm, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 100 mm, FLOW Waterjet Cutting Machine IFB-12 – Waterjet System We are selling our Flow waterjet machine with an additional special stainless steel water tank. Food-grade / Industrial / Chemical applications The machine has been in use with us for 2 years. No emergency sale – being sold due to purchase of a new machine. The system is in very good condition Fully functional Manufacturer: Flow Year of Manufacture: 2006 Type: IFB Model: IFB 12’ Base Serial No.: 365591 Laser type: Renishaw Transport dimensions Forklift pockets: 17x10 cm Total height: 220 cm Total width: 480 cm Total length: 450 cm Tank Length: 425 cm Width: 255 cm Ppsdpfxsy D A Ifo Ahyjr Data sheet for the machine is available (PDF upon request) Inspection before purchase is possible and encouraged. Delivery available on request. Sale as-is in condition shown in the pictures.

Condition: used, Year of construction: 2009, operating hours: 3,303 h, functionality: fully functional, pressure: 4,000 bar, overall weight: 990 kg, Uhde HPS 4011 High pressure pump 15 HP /HP Ppodpfx Ajuixdcjhyer (Pictures are condition)

Condition: new, functionality: fully functional, type of input current: three-phase, input voltage: 460 V, input current: 109 A, power of the servo motor: 73,500 W, input frequency: 60 Hz, power: 73.55 kW (100.00 HP), cable length: 1,000 mm, control voltage: 460 V, Equipment: type plate available, We offer you a new A-synchronous motor for KMT SLV 100 HP for sale. Please also visit our other advertisements with spare and wear parts, water jetting machines and pumps. Or visit our webshop. For the access data, please contact us by phone or e-mail. As your contact for all things waterjet with 25 years of experience, we can also offer you the following: - Used systems and pumps (used and reconditioned) - Machine relocations - Machine and pump overhaul or refurbish (at your site) - Fast spare parts supply (stock 24/7) - Special solutions in the waterjet sector - Technical and online support (XM Reality) - Qualified software training - Service, training and maintenance work Calculate your annual requirements with us or secure your maintenance contract and we will guarantee you your TOP price for 12 months. We are already looking forward to making you an individual offer. No matter which application you require - you can count on us! Simply get in touch with us. Psdpferwxu Iox Ahyepr Our team will be happy to help you.

Condition: excellent (used), Year of construction: 1999, operating hours: 34,675 h, power: 36.77 kW (49.99 HP), Here we offer you a KMT SLIV 50 hp pump for hire. You can test this pump or bridge a breakdown of your pump for only 450 € per week. plus shipping and installation For purchase in current condition we offer you the pump for 12.500 € with overhaul / refurbish between 25.000 € and 35.000 € We are happy to advise you. Oil/air cooling available Pedpfxorx Stqe Ahyepr We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: like new (used), Year of construction: 2008, operating hours: 23,412 h, functionality: fully functional, KMT SV 100 HP S high pressure pump Ppjdpfxjnab Ero Ahyer Sold in overhauled condition. new pressure intensifier, new control and new HP pump Oil/air cooling available ( Pictures are condition )

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 9558, Used fully functional WJS waterjet cutting machine with KMT SLIV 50 HP pump. Ppedpfoi Hckrox Ahyer Machine is in disassembled condition and can not be inspected. Installation and commissioning will be done by us and is not included in the price. The machine can also be completely overhauled ( new control cabinet, new control and new CE. This would mean a surcharge of about 50.000€)

Condition: good (used), Year of construction: 2012, Machine is in good working condition. Ppedpfx Ahsylx Hreyor

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 16/195245, repeat accuracy: 0.025 mm, working range: 3,660 mm, travel distance X-axis: 3,660 mm, travel distance Y-axis: 1,830 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.025 mm, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 200 mm, table length: 4,000 mm, operating speed: 212 mm/s, table width: 2,000 mm, pressure: 6,000 bar, positioning speed: 12,700 m/min, rapid traverse X-axis: 12,700 m/min, rapid traverse Y-axis: 12,700 m/min, operating pressure: 6,000 bar, cutting speed: 7,620 mm/min, travel speed (max.): 12,700 mm/min, feed length X-axis: 3,660 mm, feed length Y-axis: 1,830 mm, feed length Z-axis: 200 mm, total width: 21,000 mm, feed rate X-axis: 12,700 m/min, feed rate Y-axis: 12,700 m/min, water pressure: 6,000 bar, compressed air connection: 6 bar, pump pressure: 6,000 bar, product height (max.): 200 mm, working length: 3,660 mm, input frequency: 50 Hz, power: 75 kW (101.97 HP), load capacity: 3,200 kg, throat depth: 21,000 mm, FLOW I-6012 IFB – Premium Waterjet Cutting System with 87,000 PSI & Dynamic Waterjet Cut ANY material up to 250 mm thick – with precision down to 0.025 mm. This Flow IFB is not your standard waterjet system. Featuring 87,000 PSI HyperPressure technology and the patented Dynamic Waterjet cutting head, it belongs to the absolute top range of machines. Comparable new systems today cost over €400,000. WHY THIS MACHINE WILL IMMEDIATELY BENEFIT YOUR OPERATION: - 87,000 PSI instead of the usual 60,000 PSI: This translates into 20-50% higher cutting speeds and 30-50% lower abrasive consumption, significantly reducing your unit costs in daily operation. Ppodpfx Ahoyl S Nyjyor - Dynamic Waterjet with 5-axis kinematics: Automatic compensation for taper and stream lag. Achieve burr-free, taper-free cut edges at 2-4 times the speed of conventional machines – with no need for secondary finishing. - Immediately production-ready after oil change: The system was in regular operation until August 2025. No years of downtime, no hidden damages. Operating hours can be read directly at the control unit during inspection. - Large cutting area 1,830 x 3,660 mm: Process large sheets, plates, and components without repositioning. Ideal for contract manufacturing, metal fabrication, stone processing, and prototyping. - Siemens Sinumerik 840D: Industry-standard control system. Your operators are familiar with the interface, and spare parts and support are available long-term. TECHNICAL DATA: Manufacturer: Flow International Corporation (USA) Model: I-6012 IFB (Integrated Flying Bridge) Year: 2007 Serial No.: 2006353W-044 Cutting range: 1,830 x 3,660 mm Z-axis: 200 mm Table size: 2,000 x 4,000 mm Table type: slat table with water catch basin Pump: Flow HyperJet Model 7X Intensifier Operating pressure: 87,000 PSI (6,000 bar) Motor: 100 HP (75 kW) Power supply: 400V / 3-phase / 50 Hz Cutting head: PASER ECL Plus with Dynamic Waterjet Axes: 5 axes (+/- 10° articulation) Height sensor: automatic Accuracy: +/- 0.025 mm Repeatability: +/- 0.025 mm Max. traverse speed: 12,700 mm/min Max. cutting speed: 7,620 mm/min Controller: Siemens Sinumerik 840D Software: FlowMaster / FlowPath CONDITION: The machine is stored dry and protected in a hall. All components are complete. There is no visible damage or corrosion. An oil change is required prior to recommissioning. Operating hours can be read directly at the Sinumerik control during inspection. SCOPE OF DELIVERY: - Complete Flow I-6012 IFB waterjet cutting system - 87K PSI HyperJet intensifier pump with 100 HP motor - Dynamic Waterjet cutting head (5-axis, PASER ECL Plus) - Siemens Sinumerik 840D control with PC operator station - Complete abrasive delivery system - Slat table with catch basin - Complete electrical cabinets - Spare parts on pallet (high-pressure hose, various components) - 8 original manuals (German/English) Overhead crane available for loading on site. Inspection possible at any time by appointment.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 4,853 h, travel distance X-axis: 3,000 mm, number of axes: 3, This 3-axis Flow Kent Mach 2 C was manufactured in 2014. It features a working area of 3000 x 2000 mm and operates with a maximum pressure of 60,000 PSI. The machine is equipped with a powerful 75 kW pump and utilizes abrasive waterjet cutting technology. If you are looking to get high-quality cutting capabilities, consider the Flow Kent Mach 2 C CNC waterjet cutting system we have for sale. Contact us for further details. • Cutting technology: Abrasive waterjet cutting • Working area: 3000 x 2000 mm Psdpsyu S Uzjfx Ahyepr • Pump power: 75 kW • Maximum pressure: 60,000 / 65,000 psi • Delivery volume: 0.91 gpm (3.4 lpm) • Voltage/Frequency/Phase: 480 V / 60 Hz / 1 Ph • Full load amps: 1.0 A • Enclosure type: 4 • Electrical diagram: 013659-DWG • Operating hours (control): approx. 4,853 h • Pump hours (service report): approx. 7,715 h • Machine hours (service report): approx. 32,811 h • Included components (integral to machine): High-pressure system, Intensifier pump, Cutting head, Cutting tank, Operating computer / Control unit • Due to a detected play in the axes, the machine can not currently move to a reference point • Software and Flowcut must be replaced Additional equipment • Abrasive system

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, High pressure pump from PTV WJ3030B-1Z waterjet cutting machine. Ppsdpfxoyxmmzs Ahysr Pump, reducer, main motor of 37 kW, flush valve are overhauled. H2O Jet intensifier 60K 301001-1-R.

Condition: new, x-travel: 3000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! advantages No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum stole Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤ 1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! Psdpfshqnl Tox Ahyepr So you can work longer than 1 hour.

Condition: new, x-travel: 4000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Ppedpsd Ab Uuefx Ahyjr Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,240 h, This Flow Mach M500-2060 was manufactured in 2019. It features a large cutting area of 2000x6000 mm, a programmable Z-axis, and the advanced Dynamix Waterjet XD for precise 2D and 3D cutting. Equipped with a PASER 4 cutting head and a HyperJet 94i-D pump, it ensures high efficiency. Consider the opportunity to buy this Flow Mach M500-2060 waterjet cutting machine. Contact us for more information about this machine. Podjx D Rxpjpfx Ahyopr Application Types Cutting

Condition: ready for operation (used), Year of construction: 2018, travel distance Z-axis: 305 mm, total height: 2,692 mm, overall weight: 2,041 kg, number of axes: 3, This 3-axis OMAX MAXIEM 2030 30 HP AJet was manufactured in 2018, featuring a CNC Waterjet Cutting System with a 5-axis cutting capability. It includes a robust 30 HP pump, MAXJET® 5i cutting head, and a cutting envelope of 3,061 mm by 2,019 mm. Ideal for high-precision applications, it supports a maximum material load of 1,465 kg/m². Consider the opportunity to buy this OMAX MAXIEM 2030 waterjet cutting machine. Contact us for more information about this machine. • Work envelope / cutting table: • Cutting X-axis travel: 10’ 0’’ (3,061 mm) • Cutting Y-axis travel: 6’ 7’’ (2,019 mm) • X-axis table size: 12’ 2’’ (3,708 mm) • Y-axis table size: 7’ 0’’ (2,134 mm) • Material support slats: 4’’ × 14 ga galvanized steel (102 mm × 2 mm) • Performance: Pedpfxeya Ecie Ahyspr • Traverse speed: 500 in/min (12,700 mm/min) • Repeatability: ±0.001’’ (±0.025 mm) • Accuracy: ±0.003’’ (±0.076 mm) • Pump & cutting head: • Pump power: 30 HP • Cutting head: MAXJET 5i with A-Jet (5-axis cutting) • Nozzle life: Diamond orifice, approx. 500 hours (guaranteed) • Dimensions & weight: • Operating weight: 20,500 lb (9,299 kg) • Overall height: 8’ 10’’ (2,692 mm) • Footprint (without controller): 14’ 1’’ × 14’ 1’’ (4,293 × 4,293 mm) • Slat bed: • Standard configuration: 34 slats • Maximum slat configuration (optional): 117 slats • Maximum material load: 300 lb/ft² (1,465 kg/m²) • Standard features: • Intelli-TRAX abrasive-jet linear drive system (1 micron resolution) • Brushless servo motors and drives • Abrasive feed system (15 lb capacity) • Rugged catcher tank (300 lb/ft² load capacity) • Industrial steel protection covers on X-axis • Modular bridge control and power centers • Low-noise pump and system design • Windows-based control system • IntelliMAX Standard Software (2 seats) • Mobile control station with widescreen display • No special foundation required • Ergonomic full table access • Made in the USA

Condition: ready for operation (used), Year of construction: 2019, total height: 2,500 mm, overall weight: 2,700 kg, number of axes: 3, This 3-axis STM WS3040 waterjet cutting machine was manufactured in 2019. It features a large effective cutting area of 3000 x 4000 mm, dual Z-axis CNC for enhanced precision, and is equipped with advanced NUM FLEXIUM plus 3D 5-axis control. Additional highlights include LED work area lighting, a high-pressure Servotron pump, and comprehensive safety technology. If you are looking to get high-quality cutting capabilities, consider the STM WS3040 machine we have for sale. Contact us for more information. Additional equipment • Retrofit between 2020-2023 Machine Benefits Technical Machine Benefits • Quick up feature • High-pressure connection between pump and cutting head • Pressure relief valve Ppedex D Sktspfx Ahyor • Effective cutting area: 3000 x 4000 mm • 2x z-axis cnc 3d with a and b axes • Clearance height: 300 mm with quick up • 2x stm3d cutting heads with cutting angle error compensation, pivotable up to 68° • Max material thickness: 50 mm • Support surface: 3100 x 4100 mm • 2x electric pre-drilling unit for material Extra Information Pressure Bag Filter for Wastewater Treatment Machine-Specific Data Servotron 40.45+ High-pressure Pump: 4.6 liters/min, 45 kW CNC Abrasive Dosing Unit with Intermediate Container 1600 kg Abrasive Storage Container with Mini Hopper Media Oil Filling, AC Oil/Air Heat Exchanger OneClean Hydrofilter including Automatic Water Level Control for Cutting Tank Water Analysis System Control Unit CNC Control: NUM FLEXIUM, 40 m/min Handheld Control Unit Touch Screen Operation Work Area Lighting via LED Strip Dimensions Machine Depth 3900 mm

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 2,050 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 200 mm, total height: 1,600 mm, spindle motor power: 45,000 W, product length (max.): 1,800 mm, spindle speed (max.): 1,800 rpm, This H.G. Ridder Waricut HWE 3020 2 2 D Retrofit was manufactured in 2023. It features two cutting heads, each capable of a maximum travel of 2,450 mm. Key specifications include a travel range of 2,050 mm (X) and 3,050 mm (Y), with a Z-axis travel of 200 mm. It boasts a maximum linear speed of 20 m/min and an installed drive power of 45 kW. Contact us for more information about this waterjet cutting machine. • Cutting heads: 2 Ppsdox D Ik Aepfx Ahyer • Maximum travel per head with two cutting heads: 2,450 mm • Cutting head: Z-axis CNC, sD version • Manual cutting head adjustment (Y): ±45° • Manual cutting head adjustment (X): ±10° • Position uncertainty P: < ±0.050 mm • Mean position variation Ps: < ±0.030 mm • Maximum linear speed: 20 m/min • Minimum water pressure: 3 bar • Maximum water temperature: 40°C • Flow rate: 0.7–6.4 l/min • Design pressure: max. 3,800 bar Additional equipment • Pump • Sludge removal system