Horizontal lathe

OKUMA L300-MW

Condition: used, Year of construction: 2017, operating hours: 34,000 h, functionality: fully functional, machine/vehicle number: W6212-T63-280, We have an Okuma Genos CNC lathe for sale, fully operational and immediately ready for work. The machine is in excellent working order, regularly maintained and serviced. - Main spindle and sub-spindle - Tool probe - Parts catcher Spindle speed: 3,800 rpm Technical condition: Good. The machine was purchased new for our facility in 2017 and commissioned in the first quarter of 2018. Rjdpfxow Np S Hs Acdecb The lathe is connected to power and currently in operation. It is possible to inspect and test the machine under working conditions at our site. The decision to sell is due to changes in our projects. Optionally, an LNS bar feeder is available for €10,000 and an oil mist separator for €1,500 (both visible in the photos).

Condition: excellent (used), Year of construction: 2011, CNC Lathe with y-axis MAZAK - QTN 250 MY MACH-ID 9483 Make: MAZAK Type: QTN 250 MY Control: Mazatrol Matrix Nexus Rcjdpfxoyyxzme Acdeb Year: 2011 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: MW137, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3,000 rpm - Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle - Spindle speed: 6,000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° Rjdpjxxh Udofx Acdocb - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of positions: 12 lower turret stations, all driven - Maximum speed: 4,500 rpm; Milling spindle power: 4.5 kW Electrical Equipment - Operating voltage: 400V (3-phase), fuse protection: 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3,200 × 2,200 × 1,900 mm; Weight: 5,500 kg Main Features and Capabilities: - Horizontal design: Optimal chip evacuation, parts catcher + custom-made conveyor belt - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Swarf (chip) extraction conveyor - Fire suppression system - Tool measuring system (Q SETTER) - Broken tool detection: Load monitoring with auto-learning analyzer via OSP-P300L-R - Workpiece detection on counter-spindle: Low-pressure compressed air gauges - Spindle cooling system - Documentation: Electronic and print manual available Optional: - Bar feeder: FMB Model: Turbo 10-72XT/3200/A - Bar feeder dimensions (L×W×H): 3,500 × 800 × 1,200 mm; Weight: 1,500 kg Machine status: NOT OPERATIONAL - X-axis encoder: faulty

Condition: used, Year of construction: 2015, functionality: limited functionality, machine/vehicle number: MW130, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse W: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3,000 rpm - Continuous power (100% duty cycle): Left – 15 kW / Right – 7.5 kW - Maximum swing over bed: 520 mm - C-axis positioning accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Counter-Spindle: - Spindle speed: 6,000 rpm - Maximum bar diameter: 53 mm - C-axis positioning accuracy: 0.001° - Travel: 520 mm Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-station lower turret, all positions driven - Maximum milling speed: 4,500 rpm - Milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 400V, 3-phase, fuse: 151 A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3,200 × 2,200 × 1,900 mm - Weight: 5,500 kg Redpfx Acexxrbbsdscb Main Features and Capabilities: - Horizontal construction: Optimal chip evacuation, parts catcher + custom parts conveyor belt - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measuring system (Q SETTER) - Broken tool detection system: Load monitoring auto-learning analyzer controlled by OSP-P300L-R - Workpiece detection on counter-spindle: Low-pressure compressed air gauges - Spindle cooling system - Documentation: Available electronically and as a hard copy Machine status: Operative only with main spindle – sub spindle requires repair Optional Equipment - Bar feeder: TopAutomazione model FU352 - Bar feeder dimensions (L×W×H): 3,500 × 800 × 1,200 mm - Weight: 1,500 kg

Condition: like new (used), Year of construction: 2022, operating hours: 3,800 h, functionality: fully functional, Year 2022 - 3800 hours MultiSwiss 8x26, 6 Y-axes 8 motor spindles, 11 kW – 8000 rpm max Spindle capacity 26 mm, Z stroke 75 mm (max. workpiece 65 mm) 2 X-slide units in positions 1-8, stroke 80 mm 6 X-Y slide units in positions 2-3-4-5-6-7, X stroke 55 mm, Y +/-16.5 mm Counter spindle 11 kW – 8000 rpm max Z stroke 150 mm, X 170 mm HP ejector adaptation for counter spindle (requires 3010 or 3020) Fanuc 30iB CNC control Integrated PC with Windows 10 operating system 21.5" color touchscreen Rcsdpfx Acoxrfunedob Independent C axis on each spindle in main and counter operations (requires 0060 or 0065 or 0070 or 0075)

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: MW149, Technical specifications: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left spindle 3000 rpm - Continuous power (100% duty cycle): Left spindle – 15 kW / Right spindle – 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Sub-Spindle (Counter Spindle) - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower turret, all driven stations - Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Electrical System - Operating voltage: 400V 3-phase, fuse protection 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities: - Horizontal design for optimal chip evacuation - Parts catcher and custom-made parts conveyor strip - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R Rcodpfoxxiiisx Acdjb - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load force auto learning analyzer, controlled by OSP-P300L-R - Part detection at sub spindle with low-pressure compressed air gauges - Spindle cooling system - Documentation: available electronically and as manual Option: Bar feeder: TopAutomazione FU352SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Machine status: Machine operational only with main spindle – sub spindle requires repair.

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: MW127, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Max. speed: Left spindle 3000 rpm - Power at 100% duty cycle: Left spindle - 15 kW / Right spindle - 7.5 kW - Max. swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle: - Spindle speed: 6000 rpm - Max. bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Holder with Driven Tools - Tool interface: Okuma interface - Number of tool stations: 12-position lower turret, all positions driven - Max. speed: 4500 rpm / Milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 400V 3-phase, fused at 151A - Connected load: 22.5 kVA Machine Dimensions - Dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities - Horizontal design: optimized chip evacuation, parts catcher and custom-made parts conveyor - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measuring system (Q Setter) - Broken tool detection: Load force auto-learning analyzer controlled by OSP-P300L-R - Part detection at counter spindle: low-pressure compressed air gauges - Spindle cooling system - Documentation: Available electronically and in printed format Machine Status: Currently operating with main spindle only - sub spindle requires repair OPTIONAL: Rjdpfx Aoxxihfocdscb Bar feeder: TopAutomazione model Fu352 SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg

Year of construction: 2025, operating hours: 100 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 11425, Belt edge polisher for straight edges type Amber 5+4 SX This brand new model has replaced the famous Penta offering more functions and the possibility to process small pieces with a minimum width of 4cm! Comandulli used this machine for open days and customer demonstrations and puts it up for sale now at a special price. Please contact us to learn more about the conditions. Machine configuration: - Multifunctional unit for calibrating and upper drip grooves - 5 frontal polishing heads with oscillation movement - 2 upper bevelling units Rodpoyycbkefx Acdocb - 2 lower bevelling units Pneumatic pressure rollers designed for narrow pieces from 4cm Manual frontal bar Manual lubrication Manual water valves 15" touch screen control panel Roller tables at choice

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: MW144, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min Rcedpfxsxxidas Acdeb - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3000 rpm - Power at 100% duty cycle: Left – 15 kW / Right – 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Sub-Spindle: - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower servo turret, all stations driven - Maximum speed: 4500 rpm - Milling motor power: 4.5 kW Electrical Equipment - Mains voltage: 400V 3-phase - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities: - Horizontal design: optimized chip evacuation, parts catcher + custom parts conveyor belt - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load monitoring and automatic force analysis via OSP-P300L-R - Workpiece detection at sub-spindle: Low-pressure compressed air monitoring - Spindle cooling system - Documentation: Electronic / Hard copy available OPTIONAL Bar feeder: TOP Automazione, model FU 352 - Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1500 kg Machine Condition: NOT WORKING - Turret disassembled for repair - X-axis ballscrew to be replaced - Heat exchanger / lubrication unit to be replaced - Hydraulic unit to be replaced - Sub-spindle to be repaired - Spindle position encoder to be replaced - Chip conveyor to be repaired - Set of bar clamping guide and accessory kit - Set of bearings for pusher head

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-8 - Spindle speeds : 3000 [rpm] - Max. bar diameter : 80 [mm] - Max. turning diameter : 300 [mm] - Max. diameter on bench : 520 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle speeds : 6000 [rpm] - Max. bar diameter : 53 [mm] - C axis indexing precision : 0.001 [°] - Travel : 520 [mm] TURRET - Number of positions : 12 - X/Z stroke : 230 / 460 [mm] - Live tools speed : 4500 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22.5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3050 x 1860 [mm] - Machine height : 1.850 [mm] - Machine weight : 5500 [kg] EQUIPMENT Rodpfxouhbnnj Acdscb - CNC : OSP-P300L-R - Coolant tank * with high-pressure pump - Chips conveyor - Parts catcher - Parts conveying strip - Bar loader : Top Automation FU352 - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: used, machine/vehicle number: 008319, X axis working area: 6380 mm Y axis working area: 1380 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Rcjdpfxsx A Tc Is Acdob Total number of tool changer positions: 32