Condition: used, X-AXIS STROKE 6300 MM Y-AXIS STROKE (VERTICAL) 1700 MM Z-AXIS STROKE 1000 MM ISO 50 SPINDLE SPEED 1200 RPM 8000 X 1060 MM TABLE Duebjvir Nqo Hamk Aet CNC HEIDENHAIN iTNC 320/530 BI-SPINDLE HEAD WIT ROTAZIONE 1 ° ( 360 POSITION )

Condition: excellent (used), Year of construction: 1984, Functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feed Super CONDITION Technical data: >> Year of construction 1984 Machine no. 2102-2601 >> Turn-tilt-swivel table >> Speed: 40 - 2000 rpm >> feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: Dpbyzb >> 3-axis digital display Heidenhain TNC113 >> Coolant device >> Operating instructions, spare parts plan To the machine : Dob Haou Racrsmk Aout We are offering a Deckel FP1 universal milling machine built in 1984 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine under power on site.

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine No. 52185/08 Year of construction 1968 travel X: 300 mm Y: 150 mm Z: 340 mm table size 600 x 250 mm spindle reception SK 40 - S20 x 2 Duob Hodzqb Soamk Ast spindle speed 40-2000 rpm. 16 steps motor power 1,0 and 1,4 kW pole changeable Mains connection 380 Volt, 50 Hz - Feed in X- and Z-axis - Two motor speeds and 8 gear steps - Pinol shift on vertical milling head 60 mm - Fixed angular table - Coolant device in the machine base - Adjacent control cabinet - Counter holder with counter bearing for horizontal milling SK 40 Space requirement L x W x H 1200 x 1100 x 1600 mm weight approx. 1000 kg very good condition

Condition: used, clamping height 45 to 90 mm width of T-slots 12 mm 2 units/pieces at complete price weight approx. 2.3 kg Duob Hjvimv Seamk Ast

Condition: used, Year of construction: 1973, x-travel:815 mm y-travel:400 mm z-travel:410 mm quill stroke:130 mm turning speed range - stepless:67 - 2300 U/min :8 feed speeds:0,04 - 0,08 - 0,15 mm/min feeds of table:15 - 230 mm/min table surface area:1120 x 255 mm T-Slots:3 mm T-slot - width:16 mm T-slot - distance:63 mm distance spindle - column:260 mm ram adjustment:315 mm main drive motor:1,5 kW weight of the machine ca.:1,0 t Dusb Hsvimrmsamk Ajt dimensions of the machine ca.:1,75 x 1,80 x 2,10 m

Condition: used, x-travel 600 mm y-travel 500 mm z-travel 450 mm control TNC 415 Heidenhain Main spindle: turning speed range - milling 20 - 5.000 U/min power capacity - milling spindle 6 / 9 kW tool taper SK 40 quill stroke 90 mm transmission ratio 4 swivellable +/-90 ° work table: table-size 900 x 530 mm T-slots 7 T-slot - distance 63 mm T-slot - width 14-H7 mm max. table load 400 kg Tool-Presetter: number of toolpositions 18 pos. tool taper SK 40 max. tool diameter 85 mm max. tool-dia with free toolbox 150 mm max. tool length 300 mm max. tool weight 10 kg tool changing time max. 15 sec feeds: feeds - fine adjustment 2 ~ 4000 mm/min rapid traverse X-axis 6.000 mm/min rapid traverse Y-axis 6.000 mm/min rapid traverse Z-axis 5.000 mm/min total power requirement 15 kW weight of the machine ca. 3,6 t dimensions of the machine ca. 3,4 x 3,6 x 2,2 m Tool Room Milling Machine - Universal Dueb Haju N Iuysmk Aot MIKRON WF 32C

Condition: used, clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, step blocks -Manufacturer: AMF, universal clamping pad set in wooden box -Design/Dimensions: see photos -Quantity: 3x set available -Price: per set -Dimensions box: 280/160/H40 mm -Total weight: 7.0 kg/piece Dsb Hou Npgqoamk Ajut

Condition: excellent (used), Functionality: fully functional, Universal milling machine Deckel FP1 with 3 - axis digital readout Heidenhain original condition !!! Technical data: >> Machine no. 56560/08 Year of construction approx. 1975 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed 2 axes >> Drive power .:1 / 1,5 KW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill - SK40 >> S20x2 tightening system >> Weight approx. 700 kg Ecvf9Jfv9 Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant device About the machine : Dujb Hamou Nvxmok Ast We offer a universal milling machine Deckel FP1 in very good original condition. The Deckel has very little crank play and all spindles can be moved easily. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more precise. Take the opportunity to inspect and try out the lids on site under power.

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine no. No. 2101 - 0875 Year of construction 1979 Manual travel X: 300 mm Y: 160 mm Z: 330 mm Table size 600 x 210 mm Spindle holder SK 40 - S20x2 Spindle speed 40-2000 rpm. 16 steps Feed X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.4 and 1.8 kW pole-changing Mains connection 380 Volt, 50 Hz - Infinitely variable feed in the X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages Dusb Hamksr D T U De Ajt - Pinole displacement on vertical milling head 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant unit in the machine base - adjacent switch cabinet - Original chip tray to be placed on the machine base - Electrical diagram available Space requirement L x W x H 1350 x 1100 x 1700 mm Weight 770 kg very good condition

Condition: good (used), Year of construction: 1975, Functionality: limited functionality, Tos vhn 11 -110 horizontal boring and milling machine Strokes: X = 1500 mm, Y=1500 mm, W=500 mm, Z=1000 mm Deb Hamjumv Dcek Aout

Condition: used, Year of construction: 1984, x-travel:500 mm y-travel:400 mm z-travel:400 mm Dusb Haocxxypomk Ajt table-size:700 x 470 mm spindle turning speed range:40 - 4000 U/min feed range:02 - 3600 mm/min rapid traverse speed:4,0 m/min quill stroke:90 mm spindle taper:SK 40 control:Deckel Dialog 3 power capacity - milling spindle:3 kW total power requirement:22 kW weight of the machine ca.:1,8 t Deckel FP3 NC Universal Milling Machine - CNC - Spilndle Head can be swiveled 90 ° (left or Right) - Work Table: 700 x 470 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 3.0 kw Motor for Main Spindle - Deckel Dialog 3 CNC control Systems - Seperate Power Cabin, Central Lubrication and Coolant System and Chip tray with Splash cabin

Condition: good (used), machine/vehicle number: 85382, UNIVERSAL MACHINING CENTER MAHO MH 800 C, series: 85382 X axis stroke 800 mm Y axis stroke 500 mm Z axis stroke 600 mm Work table dimensions: 900x625 mm Maximum weight allowed on the table: 600 kg Spindle rotation speed: from 20 to 5.000 rpm, 15 kW Tool taper: ISO 40 cone Dujb Hajldgf Hjmk Aet Tool shop with 30 positions MAHO numerical command Machine dimensions: 3,350mm x 2,520mm X 2,500mm; Car weight: 6,200 kg Good technical condition Price EURO 13.000 + VAT Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 1971, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine, vertical milling machine -Manufacturer: Steinel, vertical milling machine type SV 4 -Clamping table: 740 x 200 mm -Cross table: 620 x 130 mm -Travel: X/Y/Z 340/100/300 mm -Spindle holder: MK2 Debet E D D Io Hamk Asut -Speed: 112 - 2240 rpm right/left rotation -Feed: 0.10 - 0.71 mm/min -Quill stroke: 100 mm -Coolant system: -Dimensions: 1000/950/H1830 mm -Weight: 650 kg

Condition: excellent (used), Functionality: fully functional, Equipment: documentation/manual, F736 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 Retrofit at FA Huttelmaier Very good CONDITION Technical data: >> Year of construction 1985 Machine no. 2102-2891 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock Dusbju Nvwvo Hamk Ajt >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant device >> Operating instructions, spare parts plan To the machine : Universal milling machine Deckel FP1 built in 1985 in very good condition. The FP1 was overhauled by Huttelmaier in 2008. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed rate is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: used, Slotting head for milling machine, milling head, CCCP / UDSSR STANKO type 1502 No: 200 Year of manufacture 1974 Stroke size: max. 60 mm Stroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Dusb Hod Dk A Asamk Aot Hole spacing machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Centering diameter on the machine flange plate: 190 mm - Stroke size adjustable via eccentric adjustment - The drive is like the normal vertical head from the machine gearbox - Drive via driver, centric in the centering diameter - Degree scaling on the flange plate +/- 45° steplessly pivotable - This grooving head is flange-mounted in place of the normal vertical milling head (mounting in place of the vertical milling head, milling head) Weight: 42 kg good condition Slotting head bearing number 58166 and vertical milling head bearing number 58164 from identical STANKO milling machine.

Condition: used, Packing 260*160*160 mm Shipping weight 5 kg Scope of delivery as illustrated - Set of magazine pockets / tool holder SK 40 Dueb Hou Nmzfeamk Aot Control: 7 basic holders + 10 storage pockets

Condition: used, clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, step blocks -Step block: Universal clamping pad set in wooden box -Width: 30 mm -Design/Dimensions: see photos -Dimensions box: 445/275/H75 mm -Total weight: 15 kg Djb Hsu Npf Hjamk Aeut

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine no. No. 2101 - 0778 Year of construction 1979 Manual travel X: 300 mm Y: 160 mm Z: 330 mm Table size 600 x 210 mm Spindle holder SK 40 - S20x2 Spindle speed 40-2000 rpm. 16 steps Feed X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.5 and 1.9 kW pole-changing Dueb Hamkor U St Us Ast Mains connection 380 Volt, 50 Hz - Infinitely variable feed in the X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Pinole displacement on vertical milling head 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant unit in the machine base - adjacent switch cabinet - Original chip tray to be placed on the machine base - Electrical diagram available Space requirement L x W x H 1350 x 1100 x 1700 mm Weight 770 kg good condition

Condition: used, clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, step blocks, clamping screws, T-slot screws, slot screws, T-slot nuts -Clamping tool clamping screw set with storage box -Type: various versions, see photos -Thread: M20 -Price/Delivery: complete Dsb Hamju Npgwjk Ajut -Dimensions box: 380/315/H60 mm -Total weight: 11.7 kg

Condition: used, Horizontal machining center with pallet changer STEINEL type BZ 24 FFZ with CNC control SIEMENS Sinumerik 850 M serial no. 77 year of construction 1990 Travel X: 630 mm, Y: 500 mm, Z: 500 mm Dusb Haedzqmrsmk Aot Table size per pallet 400 x 400 mm Pallet rotation B-axis Spindle speed max. 7100 rpm infinitely variable Tool holder ISO 40 Mains connection 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double arm gripper - Pallet changer with 4 pallets - Horizontal pallet position for machining, axis movement = X-axis - Pallet rotation = B-axis - Spindle ram as Z-axis - Spindle ram with transverse movement as Y-axis - KSS spray nozzles on the spindle ram and in the work area - Coolant device with chip conveyor under the work area - CNC control SIEMENS Sinumerik 850 M - Interface for data transfer Space requirement L x W x H 9000 x 3100 x 3200 mm Weight 13.5 tons Transport dimensions on truck: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm Container loading into a 40" OT HC is possible. good condition

Condition: used, Universal console milling machine IMATEC type FU 145 No. 145658 Year of construction approx. 1986 Travel X: 850 mm, Y: 250 mm, Z: 450 mm (with measuring system) Travel X: 1130 mm Y: 300 mm, Z: 500 mm (without measuring system) Table clamping surface 1450 x 320 mm Dujb Hamof A Srpek Aot Tool holder ISO 50 Speed range 35 - 1500 rpm 12 steps Feed X, Y axis 10 to 510 mm/min. 12 steps Feed Z-axis 4 to 200 mm/min. 12 steps Rapid traverse 2.5 m/min. X, Y axis Rapid traverse 1 m/min. Z-axis Motor power 5.5 kW Mains connection 380 Volt, 50 Hz - 3-axis digital readout MITUTOYO, type FLC-1705-3 - Universal milling head can be swiveled in 2 axes - Work table with 5 T-slots 16 mm, spacing 62 mm - Coolant device in the machine base - Mechanical tool clamping via M24 threaded spindle - Horizontal milling shaft with 2 counter bearings - 5 SK 50 tool holders - Operating instructions Space requirement L x W x H 2450 x 2000 x 2160 mm Weight approx. 3000 kg good condition

Condition: used, Univ. console milling machine REMA type X 6230 serial no. 98307 year of construction 1998 Travel X: 700 mm, Y: 250 mm, Z: 380 mm Table size 1100 x 300 mm Spindle holder ISO 40 Distance spindle nose - table max. 470 mm Pinol movement 55 mm Spindle speed Vertical 45-2000 rpm 12 steps Spindle speed horizontal 32-1600 rpm. 18 steps Feed speed X and Y axis 15 - 1200 mm/min. 18 steps Feed speed Z-axis 5 - 400 mm/min. 18 steps Rapid traverse X and Y-axis 2500 mm/min. Rapid traverse Z-axis 800 mm/min Vertical spindle drive 2.2 kW Horizontal spindle drive 4 kW Feed drive 1.1 kW Mains connection 400 Volt, 50 Hz - 3-axis digital readout SINO, type SDS 6-3V - Vertical milling head can be swiveled manually in two planes with drilling quill - Vertical milling head can be moved manually W-axis = 400 mm (4th axis) - Work table can be rotated +/- 45°, with 4 T-slots 14 mm, spacing 80 mm - Mechanical tool clamping via threaded spindle M16 - Manual central lubrication via hand pump - Coolant device in the machine base - recirculating ball screws - Horizontal milling shaft with counter bearing - Halogen machine light - Switch cabinet fixed to the machine Space requirement L x W x H 2000 x 1700 x 1800 mm Weight 2500 kg Djb Hounc A Ieamk Asut Very good condition

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine. No. 2102 - 3322 Year of construction 1986 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size 600 x 210 mm Spindle holder SK 40 - S20x2 Spindle speed 40-2000 rpm. 16 steps Feed X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.6 and 2 kW pole-changing Mains connection 380 Volt, 50 Hz - Active digital readout for 3 axes HEIDENHAIN type TNC 113 - Infinitely variable feed in the X, Y and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Pinole displacement on vertical milling head 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm Dueb Hamksr D T Uye Ajt - Fixed angle table 600 x 210 mm - Coolant unit in the machine base - adjacent switch cabinet - Original chip tray to be placed on the machine base - Operating instructions, electrical diagram, spare parts diagram available Space requirement L x W x H 1350 x 1100 x 1700 mm Weight 830 kg good condition

Condition: used, Horizontal machining center with pallet changer STEINEL type BZ 24 FFZ with CNC control SIEMENS Sinumerik 850 M serial no. 58 year of construction 1990 Duob Hasdzqmfomk Ast Travel X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Pallet rotation B-axis Spindle speed max. 7100 rpm infinitely variable Tool holder ISO 40 Mains connection 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double arm gripper - Pallet changer with 4 pallets - Horizontal pallet position for machining, axis movement = X-axis - Pallet rotation = B-axis - Spindle ram as Z-axis - Spindle ram with transverse movement as Y-axis - KSS spray nozzles on the spindle ram and in the work area - Coolant device with chip conveyor under the work area - CNC control SIEMENS Sinumerik 850 M with TFT monitor - Interface for data transfer Space requirement L x W x H 9000 x 3100 x 3200 mm Weight 13.5 tons good condition Transport dimensions: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm

Condition: used, Horizontal machining center with 2-fold shuttle table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M serial no. 34 year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Main spindle drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA Dueb Haoutuyiomk Aot - Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer - Coolant unit with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Weight approx. 8 tons good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 tons. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg