Tool cutter

Deckel FP1

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication Redoyf Eigopfx Ahzobt * Tailstock with counter bearing * Manual

Year of construction: 2023, condition: new, Sell alligator shears ,cable shears , also for metal. Model AS/250 Rsdpfx Ahoku Ag Sszobt Max. Cutting force 250 kN Cutting length 300 mm Max. Opening 160 mm Hyd. Pressure 15 MPa Full cycles p. minute 10-15 ×/min. Power consumption 5,5 kW Weight 450 Kg Size (L×W×H) 1200 × 980 × 1200

Condition: reconditioned (used), Please read the technical specifications thoroughly. If you are considering this machine as an investment, we kindly request your complete credentials, including a valid phone number and email address, in order to provide an offer. Redpfoxpwfgox Ahzobt Deckel FP1 AKTIV (3-axis active) Machine no.: 2102-5745 Year of manufacture: approx. 1988 Travel distances: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment features: - Heidenhain 3-axis active digital readout, type TNC 113 - Infinitely variable feed in X, Y, and Z axes - Quill stroke on vertical milling head: 60 mm - Vertical milling head swivels and can be extended horizontally by 100 mm - Coolant system (coolant tank integrated in machine base) - Documentation - Central lubrication Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically inspected. Geometry check videos can be provided upon request. Backlash Y-axis: 0.15 mm Backlash X-axis: 0.3 mm Backlash Z-axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Parallelism deviation Y-axis: 0.002 mm (measuring distance 150 mm) Parallelism deviation X-axis: 0.002 mm (measuring distance 300 mm) The following parts have been renewed: - Central lubrication checked - Heidenhain digital readout overhauled - Set of wipers installed - LED indicators for digital readout replaced - Oil change - Vertical milling head newly mounted - Oil sight glass replaced Price quoted is net, ex-stock, loaded.

Condition: good (used), Please read the technical specifications in full. If you are considering the machine as an investment, we kindly request your complete identification, including a valid telephone number and email address, in order to provide you with an offer. DECKEL Tool Milling Machine FP 1 No. 2101 Rbjdpfx Aexyc Tkjhzot with HEIDENHAIN 3-axis digital readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of the milling head arm: 100 mm Expansion of working area to: 300 x 260 mm Spindle speed vertical/horizontal: 40 – 2,000 rpm Number of gear stages: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed X/Z-axis: 5 – 500 mm/min Feed adjustment: stepless Rapid traverse X/Z-axis: 1200 mm/min Feed Y-axis: manual Fixed angular table: 600 x 210 mm Swivelling vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data are not binding! Features: - For horizontal machining, the milling head is swiveled by 90 degrees and pushed backwards. - 3-axis precision digital readout HEIDENHAIN - Stepless feed in X/Z axis - The machine underwent partial overhaul by a specialist company several years ago. Equipment: - 3-axis HEIDENHAIN digital readout - Micro-cooling spray unit - Fixed angular table - Chip tray - Machine lamp - Machine feet Further accessories available upon request! Condition: good to very good, from training workshop Available from March 2026

Condition: used, functionality: fully functional, Foundry - Inventory Complete inventory of the sand casting foundry in Venlo-Lomm, Netherlands HWS molding line, type SFM2 / 30 boxes per hour Control system S/7 Hopper mill Core shooter Röper H6.5 - H16, hydraulic – control system S/7 Core sand mixing unit, manufacturer Klein Rjdpfx Ajvz Aprjhzobt YXLON X-ray system Spectral analysis Spectro Ideco analysis device Molding machines Sand preparation Melting furnaces Belt grinder Hazardous goods container Drying oven Band saw Blasting unit Overhead crane 32t / crane rail: 5750 mm / year 2002 You are cordially invited to inspect the foundry. Equipment and items are sold in used condition. The seller excludes any warranties.

Condition: excellent (used), Please read the technical specifications in full. If the machine is of interest to you as an investment, we kindly request your complete identification including a correct telephone number and email address before submitting an offer. DECKEL Tool Milling Machine FP 1 No. 2101 with HEIDENHAIN 2-axis digital readout Travels: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Extension of working area to: 300 x 260 mm Spindle speed, vertical/horizontal: 40 – 2,000 rpm Gear stages: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed X/Z-axis: 5 – 500 mm/min Feed control: stepless Rapid traverse X/Z-axis: 1,200 mm/min Y-axis feed: manual Fixed angle table: 600 x 210 mm Vertical head swivels: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1,250 x 1,200 x 1,850 mm Technical data subject to change! Features: - For horizontal machining, the milling head is swiveled by 90 degrees and pushed back. - 2-axis precision digital readout HEIDENHAIN POSITIP VRZ 719 - Stepless feed on X/Z-axis - The machine received a partial overhaul by a specialist company a few years ago. Equipment: - 2-axis digital readout HEIDENHAIN - Fixed angle table - Chip tray - Machine lamp - Machine feet Rbjdpfx Ahjxyc N Ejzst Additional accessories available upon request! Condition: Good to very good from training facility Available from March 2026

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 30000452, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, quill travel distance: 60 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, table length: 600 mm, table width: 210 mm, overall weight: 710 kg, table load: 200 kg, Equipment: documentation/manual, DECKEL FP1 – completely overhauled in 2012 by FPS (Germany), equipped with Heidenhain digital display, tool cabinet with accessories, and dividing head. Since the overhaul, the machine has seen very light use and is therefore in like-new condition. About FPS: Specialized in the complete refurbishment of DECKEL machines. MANUFACTURER: DECKEL MODEL: FP1 CONDITION: Overhauled (2012) – mechanically and electronically as new! LOCATION: Graz (Austria) IMAGES/VIDEOS: For additional photographs and videos of the machine in operation, please contact us. Description: This high-quality DECKEL FP1 milling machine has been completely refurbished, with both mechanical and electrical components upgraded to the latest standards. A new CE-compliant control cabinet was installed in accordance with current statutory requirements (BGVA 3 / DIN-EN 60204-1, new machinery standard). During the overhaul, the control system, drive package, and drive motors were all replaced and brought up to date. The modernization also included the installation of a new, touch-safe control panel and new motor. Technical data: Operation: manual, with option for automatic positioning Control: 3-axis Heidenhain digital readout Spindle speed range: 40 – 2000 rpm (geometrically stepped, 16 speed stages) Feed rate: 10 – 500 mm/min (stepless adjustment) Rapid traverse: 1.2 m/min (stepless adjustment) Quill: Vertical & horizontal extension 60 mm, SK40 Travel (X/Y/Z): 300 / 150 / 340 mm Table size: 600 × 210 mm Table load: max. 200 kg Machine weight: 710 kg incl. angle table and milling head Rbsdoxywhcjpfx Ahzet Footprint: 1600 x 1400 x 1750 mm (W / D / H) Equipment: Vertical and horizontal spindle Milling head manually swivels ± 90° Completely new electrics and drive packages Overhauled – mechanically and electronically as new Extras: Z-axis bellows Special paintwork Highlights: Heidenhain digital readout for precise operation During overhaul, entire control system, drive package, and drive motors were renewed Contact us to arrange a viewing appointment.

Condition: used, Rotary vane vacuum pump Oil circulation lubricated Rjdpfx Ajcu Tirshzebt Manufacturer: Busch Type: RC 1000 B Status: Refurbished Warranty: 12 months Suction capacity: ca.1000m³/h Ultimate pressure: approx. 20 mbar Operating medium: Mineral oil (Inclusive) Delivery time: 2 Wo.

Condition: good (used), functionality: fully functional, I am offering for sale a Deckel FP1 milling machine in excellent condition. Everything works perfectly. The machine was used for precision components in fine mechanics, so there has been no unusual strain on the bearings or guides. I am only selling the machine because I operated my small workshop as a side business and now wish to sell it due to my age. Rbodpjyfibmofx Ahzst

Condition: good (used), Offered for sale is a partially overhauled DECKEL FP1 Aktiv universal milling machine, equipped with a 3-axis Heidenhain digital readout TNC 113 and a dividing rotary table with a three-jaw chuck. Thanks to its compact design, this machine is ideal for smaller hobby workshops or garages. Manufacturer: DECKEL Model: FP1 Machine no.: 2102-3314 Rbedexmggujpfx Ahzst - Travel X/Y/Z 300 x 160 x 340 mm - Spindle speed range 40–2000 rpm - Stepless feed in all three axes - Rapid traverse in all three axes - Vertical milling head - 100 mm adjustable vertically - Horizontal milling attachment - 3-axis Heidenhain digital readout TNC 113 - Coolant system - Dividing rotary table with a three-jaw chuck Total power requirement: 1.9 kW Machine dimensions (L x W x H): 1.30 x 1.10 x 1.60 m Weight: approx. 850 kg Price is quoted net, ex-works, loaded. Condition: Used.

Condition: reconditioned (used), Universal Tool Milling Machine Brand: harich (DECKEL) Model: B (FP 2) stepless Refurbished with CE Geometric acceptance with inspection protocol With warranty Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Centralized lubrication, manually operated - Coolant system - Operating manual CE and Safety Equipment: Rbodpfxjvfdats Ahzjt - New machine electrics with control cabinet - Electronically monitored cover on vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, release, start, and stop buttons, potentiometer for feed rate adjustment - New documentation for machine and control cabinet - CE declaration of conformity

Condition: ready for operation (used), travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, position of the milling head: SK40, input voltage: 400 V, Deckel FP1 2 axis Active Displacements: X = 300 mm Y = 160 mm Z = 340 mm Speed 40-2000 Rpm Automatic feed and rapid traverse on the X, Y and Z axes. Continuously adjustable. Table dimensions 600 x 260 mm 2 axes Active control, point-to-point control. 3 axis digital readout from Heidehain. Rbodjvuzg Aopfx Ahzst Spindle mounting SK40 Deckel mounting (outside thread)

Condition: reconditioned (used), Year of construction: 1994, Universal Tool Milling Machine DECKEL FP 1 With 3-axis active digital readout Heidenhain TNC 123 Year of manufacture: 1994 Travel: X 300 mm, Y 160 mm, Z 340 mm Spindle speed range: 40 – 2000 rpm Comes with the following accessories: Fixed angle table, 600 mm x 250 mm clamping surface Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 machine vice 1 tailstock with counter bearing 1 long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Various tool holders S 22 x 2 Z axis bellows Rbodpfsw Agxrjx Ahzst 1 chip guard Machine lamp Automatic central lubrication pump Coolant system Operating manual THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal milling machine Deckel FP2 repowered by FPS built in 2013 with 3-axis digital readout Heidenhain ND 780 As good as new !!! Technical data: >> Machine no. 2202-7020 FPS no. 3364 Year of construction 2013 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2.2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle Rbodpfx Aevbifgohzot >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout Heidenhain ND 780 >> Brake motor with immediate spindle stop >> Central lubrication >> 2 x emergency stop >> Operating instructions >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 repowered by FPS in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has an electric central lubrication system. With two emergency stop switches for safety. Mechanically and electrically tested as of 2013. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the lids under power on site. The machine is available immediately.

Condition: excellent (used), functionality: fully functional, Deckel FP1 milling machine. Very good condition. Fully functional. Rjdpfxexgdr Ij Ahzsbt