Used milling machines - univ.conv. 0-399mm X-axis travel for sale (62)

Condition: ready for operation (used), Year of construction: 2010, x-travel 280 / 300 mm y-travel 250 / 270 mm Lasdoxabqnspfx Anujc z-travel 300 / 310 mm turning speeds 45 - 2240 U/min turning speeds 18 Stufen spindle taper ISO 40 quill stroke 60.0 mm table: 670 x 320 mm table load 150 kg feed range 12.5 - 630 mm/min feed 18 Stufen rapid traverse 1.200 mm/min workpiece weight max. 150 kg T-slots 5x 12 x 63 mm total power requirement 1.6 kW weight of the machine ca. 1100 kg range L-W-H 1265 x 1080 x 1620 mm New price ~ 25.000 Euro (!!) Special price upon request - in checked conditions - machinevideo - ?v=7IsC5cg9WlI Features: - Robust electric-driven universal milling machine - ACURITE 3-axis digital display * with pivoting control panel, front right * including emergency stop button - Electric adjustment of all axes (X/Y/Z axes) * Rapid traverse in all 3 directions - Pivoting milling spindle guard - Coolant system - Lower chip tray - Vertical milling head with quill adjustment * Milling head rotation 90° * Tool holder ISO / DIN 40 / 2080 - Fixed angle table 670 x 320 mm * T-slot width x spacing 12 x 60 mm * Minimum distance between base table and spindle axis - 4 machine feet - Electrical diagram

Condition: good (used), x-travel 315 mm y-travel 180 mm z-travel 320 mm taper in main spindle ISO 40 table surface area 600 x 250 mm T-slots 5 Stk. turning speeds 45.0 - 1950 U/min feed stepless 10 - 170 mm/min Ledpfoxl E Sgex Anuoac voltage 400 V total power requirement 5.1 kW weight of the machine ca. 1300 kg range L-W-H 1000 x 1400 x 1800 mm From a training workshop (vocational school) Well maintained (!!) Features: - Robust electric motor universal milling machine - HEIDENHAIN 3-axis digital display - Rotatable universal milling head (right/left = 90°) - Manual milling spindle feed, with lock - Stable T-slot clamping table - Axis feed with rapid traverse in Y-axis * Rapid traverse continuously adjustable - Manual axis adjustment in Z+X axis - Control cabinet, installed on the left - Coolant device

Condition: good (used), x-travel 315 mm y-travel 180 mm z-travel 320 mm taper in main spindle ISO 40 table surface area 600 x 250 mm Lodpexl E Smofx Anusac T-slots 5 Stk. turning speeds 45.0 - 1950 U/min feed stepless 10 - 170 mm/min voltage 400 V total power requirement 5.1 kW weight of the machine ca. 1300 kg range L-W-H 1000 x 1400 x 1800 mm From a training workshop (vocational school) Well maintained (!!) Features: - Robust electric motor universal milling machine - HEIDENHAIN 3-axis digital display - Rotatable universal milling head (right/left = 90°) - Manual milling spindle feed, with lock - Stable T-slot clamping table - Axis feed with rapid traverse in X+Z+Y axis * Rapid traverse continuously adjustable - Swiveling machine light - Control cabinet, installed on the left - Coolant device

Condition: good (used), Manufacturer: WMW VEB Type: FW 200×630 Laedpoik Hcuofx Anusc x-y-z travel: 380 – 140 – 230 mm Table size: 200x630mm

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Lsdpfx Ansr D T U Djueac Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1983 Machine no. 2102-2444 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 Laodpfx Anotwlwzouoc >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1983 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this little gem under power on site.

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP2 in special paint finish light gray with 3-axis digital display K+C NEW Lasdou I Rm Nspfx Anujc Technical data: >> Machine no. 5983 Year of construction approx. 1975 >> Rigid angular table (newly revised) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2,2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital display K+C Newly assembled with manufacturer's warranty. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Operating instructions for digital display >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 in good condition. The Deckel has very little crank play and all spindles can be moved easily. The machine has been completely dismantled and repainted. An oil change has been carried out. Mechanically and electrically tested. The digital display from K+C makes work easier and even more accurate. You also have a 1 year guarantee on the new digital display. Take the opportunity to inspect and try out the lids on site under power. The machine is available immediately.

Condition: good (used), Working travels 300 x 150 x 355 mm Laodpfxou Eqixe Anuoc Table size 700 x 250 mm Spindle taper for collets ISO 30 Spindle speeds 58-2'000 rpm Digital read-out Misc.accessories MARCELS MASCHINEN CH

Condition: good (used), Digital read-out With milling and drilling head Working travels 330 x 400 x 475mm Table size 650 x 245 mm Spindle taper for collets ISO 40 Spindle speeds 63-2'800 rpm Misc.accessories Lajdpfx Anew Nnuteusc MARCELS MASCHINEN CH

Condition: good (used), A lot of accessories, is only offered completely! Travel X / Y / Z: 300 / 300 / 135 mm Table size W x D: 700 x 190 mm Spindle speed: 95 - 6000 rpm / 11 steps Ljdpfxjd Erqbs Anujac Tool holder: W 20 Weight: approx. 450 kg Machine size W x D x H: approx. 900 x 900 x 1500 mm Accessories: Swivel table Round table Ø 200 mm 6 shots Various collet chucks and clamping devices Horizontal milling device work lamp coolant system vice

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Customs tariff number: 8459.6930 TECHNICAL SPECIFICATIONS Lasdpfow Uc Npsx Anuoc Vertical rectangular table: - usable surface: 740 x 200 mm - number of T-slots: 2 - width of T-slots: 12-H7 - distance between slots: 120 mm Fixed right-angle table: - usable surface: 700 x 250 mm - number of T-slots: 5 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 250 mm total Universal tilting table: - usable surface: 600 x 210 mm - number of T-slots: 4 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 350 mm total Adjustable in 3 planes, on either side: 30°-45°-30° Spindle internal taper: - horizontal spindle head: ISO 30 (40) - vertical spindle head: ISO 30 (40) - universal rapid head: SV E20+ES20 Swivel in vertical plane: vertical spindle head: 360° Longitudinal travel, hand/automatic: 320/300 mm Vertical travel, hand/automatic: 375/355 mm Cross travel, adjustment handle: 150 mm Quill stroke: 60 mm Readout accuracy on micrometer verniers: 0.02 mm Main motor power/speed: 1.5 kW/1500 rpm Rapid feed motor power/speed: 0.45 kW/3000 rpm Coolant device motor power/speed: 0.15 kW/3000 rpm Spindle speed range: - 1st range: 58-375 rpm - 2nd range: 330-2000 rpm Feed rates (longitudinal or vertical): 12-400 mm/min - 10 feed rates, mm/min: 12-18-26-38-57-85-125-185-270-400 Rapid traverse speed (longitudinal or vertical): 1200 mm/min All technical data is given without obligation and subject to errors or omissions.

Condition: new, x-travel 300 mm y-travel 200 mm z-travel 350 mm table-size 700 x 200 mm Lsdpfofrzunex Anueac spindle taper ISO 40 turning speed range - horizontal 150 - 1660 U/min turning speed range - vertical 110 - 1230 U/min quill stroke 120 mm spindle drive 3,0 kW weight of the machine ca. 1,15 t dimensions of the machine ca. 1,31 x 1,38 x 1,65 m